Re: [OSL | CCIE_Voice] (no subject)

Also make sure under Remote Destination Configuration that you [/] the line associating box. I just went through this and that was my issue. EJ From: Alex Goh To: Mini Me Cc: "ccie_voice@onlinestudylist.com" Sent: Saturday, August 27, 2011 8:50 PM Subject: Re

Re: [OSL | CCIE_Voice] Vol 2 WB 6 - QoS question 7.1

Well since the WB questions on based on a whole lab and just broken down by areas for the individual labs I would say that yes the PG answer was based on the prior questions's configuration with the new 7.1 requirements. EJ From: "Geoghegan, Stuart" To: "ccie_

[OSL | CCIE_Voice] CUPC Certificate error

I am getting the following error when I try to login with CUPC Ver 7.1. Login failed. Certificate verification failed Make sure you have a valid certificate. Has anyone else had this issue? EJ___ For more information regarding industry leading CCIE Lab

Re: [OSL | CCIE_Voice] CUPC Certificate error

Great, thanks for the reply Ash. EJ From: Ashraf Ayyash To: edgar feliz Cc: "ccie_voice@onlinestudylist.com" Sent: Thursday, September 1, 2011 4:59 AM Subject: Re: [OSL | CCIE_Voice] CUPC Certificate error this error mean that you have instal

Re: [OSL | CCIE_Voice] CUPC Certificate error

I downgraded to 7.02(a) CUPC but now I am getting unable to connect to login server message, but I place the presence service on two phone and I can login on those no problem. EJ From: Ashraf Ayyash To: edgar feliz Cc: "ccie_voice@onlinestudylist.com&q

Re: [OSL | CCIE_Voice] CUPC Certificate error

Ash yes hosts file was OK...I ended up having to go back to CUPC version 7.0(1)...not a lot of backward compatibility is there!!! EJ From: Ashraf Ayyash To: edgar feliz Sent: Thursday, September 1, 2011 9:31 AM Subject: Re: [OSL | CCIE_Voice] CUPC Certificate

Re: [OSL | CCIE_Voice] MOh Issue

I have been troubleshooting a similar issue, but with my HQ site. Also MoH works when I make a PSTN call to BR1, BR2 but not from internal, BR1->BR2 etc. EJF From: Adil Shaikh To: amit batra Cc: ccie voice Sent: Sunday, September 11, 2011 10:32 PM Subject: Re

Re: [OSL | CCIE_Voice] MVA unable to match RD

I just had similar issue and it was that I had not checked the box in the RDP to be associated with the users line "5002" in my case. EJF From: Sanoj Thomas To: "ccie_voice@onlinestudylist.com" Sent: Sunday, September 18, 2011 3:48 AM Subject: [OSL | CCIE_Voic

Re: [OSL | CCIE_Voice] ntp

Ray, I have never put the "NTP master" command on my routers and I have not had an issue with the CUCM sync to the (HQ) router. I use mainly the VRACKs from proctor, and in my little lab at home it's the same. As long as I have set the time I want in the PSTN router for the HQ router to sync of

Re: [OSL | CCIE_Voice] Huge Discount for ProctorLabs Vouchers

Yeah seems a little strange that the racks are all rented for a period of 2 weeks, and they want us to buy vouchers at this time???  I'll Wait. EJF From: Jon H To: Marko Milivojevic ; Ken Wyan Cc: OSL Voice Sent: Tuesday, September 20, 2011 7:58 AM Subject:

Re: [OSL | CCIE_Voice] proctorlabs website ?

NO I trade this morning for a while and it was not available. EJF From: Rrcrumm To: Ken Wyan Cc: "ccie_voice@onlinestudylist.com" Sent: Saturday, September 24, 2011 5:28 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs website ? If it is you should send an ema

Re: [OSL | CCIE_Voice] proctorlabs website ?

I just tried again and can't get to site. EJF From: William Affeldt To: edgar feliz Cc: Rrcrumm ; Ken Wyan ; "ccie_voice@onlinestudylist.com" Sent: Sunday, September 25, 2011 6:48 PM Subject: Re: [OSL | CCIE_Voice] proctorlabs website ?

[OSL | CCIE_Voice] Proctor labs issues AGAIN!!??

Is anybody else having issues getting to their session, been fighting this for over an hour. I actually had a session from 12 AM and hoped it would continue but I went to sleep for a couple of hours and return to not being able to access anything. I can login now but so far that's as far as I ha

Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a session now

Its not you it's them I am having same issues, they say they are looking at it. Now I can get to the login page and start my session but it is slow routers are not always responding. Edgar From: "pithog...@yahoo.com" To: ccie_voice@onlinestudylist.com Sent: Sa

Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a session now

There is nothing we can do until Proctorlabs resolves the ISP issue they are having. I was told anyone who had issues would get a replacement voucher. EJF From: "pithog...@yahoo.com" To: edgar feliz ; "ccie_voice@onlinestudylist.com" Sen

Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a session now

To many people are having issue for it to be "operator error" it's definitely something on their end ISP etc. EJF  From: Chris Martin To: pithog...@yahoo.com Cc: ccie_voice@onlinestudylist.com Sent: Saturday, October 1, 2011 10:31 AM Subject: Re: [OSL | CCIE_Vo

[OSL | CCIE_Voice] Can't Connect to PL VRACK Servers via Hardware VPN

Is anyone else having issues connecting to the Servers on their VRACK sessions? EJF ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.Platin

Re: [OSL | CCIE_Voice] Why not set CSS in the Device Pool?

You can have DPs for devices in that will have similar behavior and set the CSSs accordingly in the DPs. EJF From: Ken Wyan To: Mark Reed Cc: ccie_voice@onlinestudylist.com Sent: Saturday, October 8, 2011 3:47 PM Subject: Re: [OSL | CCIE_Voice] Why not set CS

Re: [OSL | CCIE_Voice] Router with problem

Yeah there is a couple of routers on the vrack with that problem I have one on rack 15 and have had rack 20 also. You can still work it won't bother the configuration. If you want turn logging to console off and it won't be so annoying. EJF From: Emanuel Dama

[OSL | CCIE_Voice] Overlapping lab questions

I came across this today when doing labs and had not paid attention to this before but today I did a lot of things from memory even though the order was not same as lab book. I have a question that requires that the PSTN phone line 2 ( +12123942123) call hqphn2 (2123945002), in the missed calls

Re: [OSL | CCIE_Voice] Overlapping lab questions

And another question would be do we bring this up to the proctor, or how do they grade this??? EJF From: edgar feliz To: CCIE Sent: Sunday, October 9, 2011 9:04 PM Subject: [OSL | CCIE_Voice] Overlapping lab questions I came across this today when doing

Re: [OSL | CCIE_Voice] Router with problem

Been there done that...But as you can see not fixed!!! EJF From: Rrcrumm To: Emanuel Damasceno Cc: "ccie_voice@onlinestudylist.com" ; IPexpert Tech Support Team Sent: Sunday, October 9, 2011 10:30 PM Subject: Re: [OSL | CCIE_Voice] Router with problem This

[OSL | CCIE_Voice] Can't connect to VRack servers 16

OK had this problem last weekend and tech had me change the access-list on my VPN router, now I am having the same issue can't connect to server but can ping from routers. Very slow response from support.  EJF___ For more information regarding industr

[OSL | CCIE_Voice] CUE-2-CCM Can't dial VM 3600

   I have set up CUE to CCM configured CTI ports, vm profile etc. double checked with all the IE guide and can't get BR2 phone to dial into VM? Any Ideas? Users imported int0 CUE OK, CCM can see the 10.10.202.2 CUE when I look at CTI RPs.   EJF___ For

Re: [OSL | CCIE_Voice] CUE-2-CCM Can't dial VM 3600

d+Y9J3xlk2B35j0nfGWTYHfmP"  end subsystem ____ From: Vik Malhi To: edgar feliz Cc: CCIE Sent: Friday, October 28, 2011 10:02 PM Subject: Re: [OSL | CCIE_Voice] CUE-2-CCM Can't dial VM 3600 Are CTI Rps and CTI ports registered? When you sh run inside t

Re: [OSL | CCIE_Voice] CUE-2-CCM Can't dial VM 3600

OK, I thought I had done the CUCM first but i may have been working both at the same time. The configs all look right APP/USER ports etc. I guess I may have gotten ahead of myself. I am reworking that lab. Thanks Edgar From: Vik Malhi To: edgar feliz Cc

Re: [OSL | CCIE_Voice] Workbook 2 typos

Did you configure the calling party transform pattern?  \.+44.! predot/prefix 0? At least in other labs with similar question this was part of the configuration. because the number you see when ringing does not have the plus but in the missed calls you should see the plus and be able to dial out

[OSL | CCIE_Voice] Modify button items vs Phone button template

I am posing this questions because I have worked on the same lab consecutive days and had different results on this one item today from yesterday. The question is form the 5 new labs, lab 1 Q-2.3. which to summarize, asks you to configure blf for phn1 ext 2001 on phn2. Today I configure this sam

Re: [OSL | CCIE_Voice] Afterhours Support

Facebook: http://www.facebook.com/mattmjust Office: (810) 326-1444 Ext: 331 Mobile +1 (810) 406-7218 Sent from my iPhone On Nov 14, 2011, at 6:32 PM, Edgar Feliz wrote: >           N: Edgar Feliz >           E: ejfeli...@yahoo.com >           Pod: CCIE  Voice 28 >           UN: ejfeliz

Re: [OSL | CCIE_Voice] I'M DONE!!!

CONGRATS Just the XBox?? Well I would recommend Batman Arkham City for starters...Not that i have played it much lately, have not touched it in over a month. E On Tue, Nov 22, 2011 at 1:17 PM, Mark Reed wrote: > I forgot the most important part. Mark L Reed CCIE #31990 > > > On Tue, Nov 2

Re: [OSL | CCIE_Voice] User Import to Unity Connection from CallManager

I've done 6-7 CUCM/CUC intergration in the practice labs and had only to do a Sync when I had a DB issue on the CUCMs. E On Thu, Nov 24, 2011 at 3:59 AM, datucha123 datucha123 wrote: > I think you can do both as nothing will be ruined after the synch. > > On Thu, Nov 24, 2011 at 10:01 AM, Ken W

[OSL | CCIE_Voice] Type/Plan not as should be.

I am working a a lab that requires TEHO >SiteA> calls to siteB/PSTN = calls are routed SB-RTR and if not available SG-SLRG. 1. SB=H323 2. Calls out of SB should have plan/type as ISDN/National 3. calling number = 10 4. called number = 7 My problem is that as seen on the output below

Re: [OSL | CCIE_Voice] Type/Plan not as should be.

r the calling number. so at last i put this which i normally had been doing but had a brain fart i guess. So fixing the ISDN map fixed the calling plan/type. This works!! isdn map address ^[2-9]..$ plan unknown type unknown On Thu, Nov 24, 2011 at 1:28 PM, Edgar Feliz wrote: > I am wor

Re: [OSL | CCIE_Voice] CUC problems

I have had this 2 x and in one I had a DB issue and had to do a db sync restart sub, the other I had to restart the CUC. E On Fri, Nov 25, 2011 at 9:01 AM, datucha123 datucha123 wrote: > As I know, the CUC has the G729 Support as well, So I do not think that > the issue is because of Tarsncoder

[OSL | CCIE_Voice] Documentation Access and Where to Go

This is a list of what we know could be required urls and features for any given lab and were to go to find it if needed. Please add to the list below as this was just a starting point. My intent is to have the urls needed as part of the 20-30 minute initial read and documentation of the lab and th

Re: [OSL | CCIE_Voice] CUC problems

do not have any issues the CUCM DB >> replication. But still not success :( >> >> On Fri, Nov 25, 2011 at 7:40 PM, Edgar Feliz wrote: >> >>> I have had this 2 x and in one I had a DB issue and had to do a db sync >>> restart sub, the other I had to restart the CU

Re: [OSL | CCIE_Voice] CUC problems

CUC reboot worked for me. I use PTs and CSSs. for whatever reason this has been pretty much a daily ting for me I can't figure out what it is. E On Fri, Nov 25, 2011 at 9:12 PM, Edgar Feliz wrote: > I am having the same problem today!!! I just rebooted the CUC and am > waiting to

[OSL | CCIE_Voice] live-record no bip

If given the task of configuring live-record but part of the requirement states that the TONE NOT be played back to the users when recording has begun, how is this done? I have looked in CUC and CCM and don't see a way to stop this. E ___ For more inform

Re: [OSL | CCIE_Voice] live-record no bip

setting is 0, the beep is disabled. > 2. Click *Save*. > > > > On Fri, Nov 25, 2011 at 9:52 PM, Edgar Feliz wrote: > >> If given the task of configuring live-record but part of the requirement >> states that the TONE NOT be played back to the users when recording has >

Re: [OSL | CCIE_Voice] CUC problems

t > have any problems like that. > > I will try to collect the Traces for that call from CUCM and see what will > happen > > On Sat, Nov 26, 2011 at 6:31 AM, Edgar Feliz wrote: > >> CUC reboot worked for me. I use PTs and CSSs. for whatever reason this >> has bee

Re: [OSL | CCIE_Voice] CUCM/UCCX Intergration

Run this command on the CUCM Pub you do NOT have to reboot. run sql update processconfig set paramvalue="T" where paramname like '%nstalled%' E On Sun, Nov 27, 2011 at 2:07 AM, CCIEVoiceKP wrote: > Have you re-syched the data yet? Subsystems --> Unified CM Telephony --> > Data Resync > > KP >

Re: [OSL | CCIE_Voice] CUCM/UCCX Intergration

That is not the issue there is something wrong with the way the initial installations took place and you have to run this command. I have been working on the first 3 labs from the new 5 7 days straight and it is happening every time. The T flag is not being set and it has nothing to do with resync

Re: [OSL | CCIE_Voice] ISDN Cause i = 0x80AF - Resource unavailable

Bill what lab are you working on? On Sun, Nov 27, 2011 at 7:55 AM, Bill Lake wrote: > OK, if you are sure it is not a ISDN issue but it appears to be that the > call is set up > > Nov 26 22:10:48.504: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8 callref > = 0x808D > Progress Ind i = 0x81

Re: [OSL | CCIE_Voice] CUCM/UCCX Intergration

ccie_voice-ow...@onlinestudylist.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of CCIE_Voice digest..." > > > > > > Today's Topics: > > > > 1. Re: CUCM/UCCX Int

[OSL | CCIE_Voice] 5 New labs what to watch for!!!

Guys I have been working on the new (5) labs mostly 1-3 since they have the guide. Here is what i have found to be things to watch for and fixes, Please note i have been working on these for over 10 days and it's the same every time it is just the way the integration was done for the VM images pur

Re: [OSL | CCIE_Voice] 5 New labs what to watch for!!!

Sorry had a copy/paste issue myself 2nd number in first point should be 01191674573893 <011916745738931>2 On Sun, Nov 27, 2011 at 12:12 PM, Edgar Feliz wrote: > Guys I have been working on the new (5) labs mostly 1-3 since they have > the guide. Here is what i have found to be thi

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 69, Issue 191

e person managing the list at > >>ccie_voice-ow...@onlinestudylist.com > >> > >> When replying, please edit your Subject line so it is more specific > >> than "Re: Contents of CCIE_Voice digest..." > >> > >> > >> Today'

Re: [OSL | CCIE_Voice] Live Record

I think Ash means you have to have a CTI route point with the # you will call to record and have that forward all to VM/CUC. When you are on a call then you can hit the conference soft-key and put in the number mentioned above from the route-point and conference soft-key again to start recording bu

Re: [OSL | CCIE_Voice] Live Record

Hi ken, Don't pay attention to A Mitstake... You can ask all the questions you want here.. he is not the boss of us... If he does not want to participate in a discussion he should just keep his trap shut. E On Mon, Nov 28, 2011 at 12:20 AM, Ken Wyan wrote: > Dear Sir (Amit), > > Thanks for y

Re: [OSL | CCIE_Voice] Calling Name with H323 GW

Did you put in the voice service voip no supplementary-service h225-notify cid-update On Mon, Nov 28, 2011 at 8:52 PM, ccielabrat wrote: > I must be missing something easy. > I'm trying to get "Calling Name" to display on my PSTN phone when > receiving a call from a IP phone going through a

Re: [OSL | CCIE_Voice] Calling Name with H323 GW

Does this help? you have a customer who does not want to see the final transmitted number. Rather he wants to see the number that was sent to the GW (e.g. in a e164 concept the one starting with a +). this can be done by disabling the h225 CID update during the call. This can be set either global

[OSL | CCIE_Voice] lab @ RTP

Anyone have a lab scheduled at RTP in the next few days? E ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUE Integration

Yes on the lab workbook it tells you if you need to change license and were to go get them. Always check your license first even In real lab you may need to change license depending on the lab you get and what someone before you had may require different license On Dec 5, 2011, at 9:08 AM, Pr

Re: [OSL | CCIE_Voice] CUCM Log Problem

Are you looking at the Sub CUCM or whatever you primary call processing agent is. IF you are in the wrong CUCM you will not see any call information. E On Mon, Dec 5, 2011 at 10:56 AM, datucha123 datucha123 wrote: > Hello, > > I have a problem with CUCM - when trying to view Logs in real time

Re: [OSL | CCIE_Voice] New Lab #1

I have done this lab several times and have not had an issue. I have not looked at the PSTN router in a while but in the racks that I have worked on mostly 29, 32 12, 13 I have not seen and issue. Edgar On Sat, Jan 7, 2012 at 11:54 AM, chase mergenthal wrote: > Has anyone noticed the Dial-peers

Re: [OSL | CCIE_Voice] Five New Lab from IPExpert

Hi Wayne, The guide for lab 5 is still not up. Edgar On Sun, Jan 15, 2012 at 1:02 PM, Wayne Lawson wrote: > Gang - > > I think the 5th DSG is going to be uploaded this week. Matt / Vik - > can you verify? > > Regards, > > Wayne A. Lawson II - CCIE #5244 > Founder & President > IPexpert, In

Re: [OSL | CCIE_Voice] 5-lab SelfStudy NTP

Your "prefer" method is the way i have done the labs. E On Mon, Jan 23, 2012 at 3:58 PM, Jurassic Labs wrote: > In both LAB#4 and LAB#5 of the newer 5-lab series, there's an NTP section > that I don't think is being fully addressed in the DSG (Solution Guides). > Here's the question: > > Config

Re: [OSL | CCIE_Voice] 5-lab Workbook #4 - Unity Connection Notification

Vic, have the updated guides been uploaded? We only get so many print cycles and just want to make sure I am not wasting paper too. Thanks On Tue, Jan 24, 2012 at 2:38 AM, Vik Malhi wrote: > I don't think they are in beta mode. I accidentally skipped a question, > it's been corrected and it sho

Re: [OSL | CCIE_Voice] 5-lab Workbook #4 - Unity Connection Notification

gt; > > On Jan 24, 2012, at 11:08 AM, Edgar Feliz wrote: > > Vic, have the updated guides been uploaded? We only get so many print > cycles and just want to make sure I am not wasting paper too. > > Thanks > > On Tue, Jan 24, 2012 at 2:38 AM, Vik Malhi wrote: > >>

[OSL | CCIE_Voice] New lab 5 CUCM/CUC SIP Integration

I am currently working on new lab 5 and I have my CUCM-CUC integration working, for voicemail left by SA > SB to SB phone and SB > SA Phone I get MWI both directions. But for PSTN or SC While I can leave a VM MWI does not work and the VM does not show up when I check the inbox for either SA or SB p

Re: [OSL | CCIE_Voice] New lab 5 CUCM/CUC SIP Integration

r now. It forwards to the correct VM box and you can even play the > message back to your self after you record it. It just never makes it to > the mailbox. > > *From:* Edgar Feliz > *To:* ccie_voice@onlinestudylist.com > *Sent:* Saturday, February 4, 2012 10:15 AM > *Subje

Re: [OSL | CCIE_Voice] New lab 5 CUCM/CUC SIP Integration

gt;www.ipexpert.com < <http://www.ipexpert.com/> > http://www.ipexpert.com/> > > > On Feb 4, 2012, at 11:42 AM, William Affeldt < > william.affe...@yahoo.com> wrote: > > You are having one way audio issues then. > > Sent from my iPhone > > On Feb

Re: [OSL | CCIE_Voice] New lab 5 CUCM/CUC SIP Integration

; > http://www.ipexpert.com/communities> and our public website at > <http://www.ipexpert.com>www.ipexpert.com < <http://www.ipexpert.com/> > http://www.ipexpert.com/> > > > On Feb 4, 2012, at 11:42 AM, William Affeldt < > william.affe...@yahoo.com> wr

Re: [OSL | CCIE_Voice] UCCX scripts

You should be able to just copy from you computer to the RDP/CCX there is a setting in the RDP client you may have check >options before starting the session then > local resource tab put check on box for local device and resources. Edgar On Sun, Feb 5, 2012 at 10:51 AM, Randall Crumm wrote: >

Re: [OSL | CCIE_Voice] UCCX scripts

OOPs!! Sorry Randall I gave you option to copy Vic's scripts to the RDP/CCX. Not sure if it works the other way around, but there aren't any script kept on the server because they rebuilt every session. Edgar On Sun, Feb 5, 2012 at 11:29 AM, Ken Wyan wrote: > That's illegal. > > share one dir

Re: [OSL | CCIE_Voice] New lab 5 CUCM/CUC SIP Integration

gt;> >>> I have the same issue in my own LAB, and as soon as I restart my >>> CUC server, the MWI and Message start to work from PSTN for a while. but >>> then again stops. >>> >>> And I make restart of CUC server every time. >>> >>&

Re: [OSL | CCIE_Voice] Tragic news

WoW!!! Sorry to hear that, so young too. Condolences to his family. Edgar On Fri, Feb 24, 2012 at 10:59 PM, Emanuel Damasceno wrote: > Hello brothers, > > I just like to let you know that my friend and study partner, Jeferson > Guardia CCIE #28157, has passed away yesterday. > > He was a skate

Re: [OSL | CCIE_Voice] 150 ms latency

That's one way. Sent from my iPhone On Feb 26, 2012, at 3:06 PM, donny f wrote: > hi all, > > are the 150 ms latency and 64 kpbs for one way or 2 way ? > > tks > d > ___ > For more information regarding industry leading CCIE Lab training,

Re: [OSL | CCIE_Voice] new 5 Lab 2 - CUPS not syncing with CUCM database

Did you reset the trunk? That ussually works for me. On Sun, Aug 12, 2012 at 2:29 PM, Rrcrumm wrote: > Yes > > Sent from my iPhone > > On Aug 12, 2012, at 11:21 AM, "Jeff S" wrote: > > On CUPS, run the command “show tech network hosts” from the CLI. Does > CUPS have the correct hostname for CU

Re: [OSL | CCIE_Voice] new 5 Lab 2 - CUPS not syncing with CUCM database

Sometimes takes a couple of resets. Edgar On Sun, Aug 12, 2012 at 4:48 PM, Randall Crumm wrote: > Thats what I did and it worked. > > Thought I reset it when I created it. > > > > Cheers, > Randall > > ------ > *From:* Edgar Feliz

Re: [OSL | CCIE_Voice] New Lab 1 CCX no value for calls in queue

I think you have to add that look at pages 176-178 on the guide book for lab 1. Edgar On Sat, Aug 25, 2012 at 5:23 AM, Steffen Bruening wrote: > Hi all, > > my ccx scripting skills are only on a basic level. When I configure the > script and the layout I never seen a value behind the callinq var

Re: [OSL | CCIE_Voice] CME Call List Presence

Happens to me every time. It will not work unless I reboot and I have the the create cnf and reset the phones too. Edgar On Fri, Oct 5, 2012 at 12:52 PM, Bruno Nonogaki wrote: > Hello, > > When I configure CME Call List presence, I always have to reboot the > router to make it work. Does this a

Re: [OSL | CCIE_Voice] AAR Not Working

A lot of times for me at least AAR would work after I reboot the routers. Edgar On Wed, Nov 14, 2012 at 10:05 PM, Bill wrote: > So you can see the call go out the pstn at HQ and arrive at SB but you get > busy? > > What is the error or reason for busy? > > Normally, I do not put anything but aa

Re: [OSL | CCIE_Voice] No Services Configured

Bill, This works great for deleting services and changing the order that the directories are listed in, but if you are give a picture that shows the "No Services Configured" just above the soft-keys that only appears when you follow Vic's method, from what I have been able to see working this out

Re: [OSL | CCIE_Voice] No Services Configured

Thanks Mohamed. Edgar On Sat, Nov 17, 2012 at 11:13 AM, Mohamed Gazzaz wrote: > Thanks for the clarification. Can't we achieve the same result by using > these steps > > - Delete the Missed, Placed, Corporate, Placed and Received from the > Phones > IP Phone Services page > - From the below lin

Re: [OSL | CCIE_Voice] QUESTION FOR THE LAB

Unless it is specifically stated to use one or the other, use whatever you feel comfortable with as long as the tasks are completed correctly. Edgar On Thu, Nov 22, 2012 at 9:05 AM, Chrysostomos Christofi < ch.christ...@logicom.net> wrote: > Hi > > ** ** > > If we have cue in the lab then w

Re: [OSL | CCIE_Voice] Back to back session IPexperts racks

I've done it many times just ask them to "join" your sessions, the support team has always been great about doing it when you give them enough time and if racks are available Edgar On Tue, Apr 16, 2013 at 6:58 AM, Bill wrote: > You need to verify as in the past this did not always work. Not s

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

much easier way is to go to go to CCX create a file in notepad that says "No Services configured" save it as scph1.html etcset you enterprise parameter to both...on your phone set it to external and on site c ph1 Directories url enter. http:///scphn1.html On Wed, Apr 17, 2013 at 2:57 PM

Re: [OSL | CCIE_Voice] phone association

BAT file. EJF On Mon, Apr 29, 2013 at 12:05 AM, ikizoo hello wrote: > Hi All > is there any easy way to associate a phone to user, i am doing it > manually, and it takes a bit of time. > -ikizoo > > ___ > For more information regarding industry leadi

Re: [OSL | CCIE_Voice] DistinctiveRingList in SRST

Have you tried adding that file to the SRST RTR and doing TFTP-server etc. from that RTR. Edgar On Wed, May 8, 2013 at 11:15 AM, Suresh Bhandari wrote: > Hello Experts! > > Anyone tried using DistinctiveRingList.xml in CME SRST to give the IP > Phone DN a specific list of ring lists? > > I am

Re: [OSL | CCIE_Voice] proctorlabs replication

Check DB is replication. Edgar On Thu, May 23, 2013 at 3:21 PM, CCIEing wrote: > Did you try to disable csa? > > > On Thu, May 23, 2013 at 8:21 PM, Karen Johnson > wrote: > >> hi all, >> >> I used auto phone register in proctorlabs. When UCM group start with SUB, >> phone never registered. >>

Re: [OSL | CCIE_Voice] proctorlabs replication

cli = util db status gui = Cisco Unified reporting > DB replication status Edgar On Thu, May 23, 2013 at 4:20 PM, Karen Johnson wrote: > u mean "show utils service " ? > > *From:* CCIEing > *To:* Karen Johnson > *Cc:* "ccie_voice@onlinestudylist.com" > *Sent:* Thursday, May 23, 2013 1:21:

Re: [OSL | CCIE_Voice] Cisco: Provide a reasonable transition path from CCIE Voice to CCIE Collaboration

DONE...My wife also posted it on FB. On Fri, May 31, 2013 at 12:40 AM, Suresh Bhandari wrote: > *Cisco: Provide a reasonable transition path from CCIE Voice to CCIE > Collaboration *- Sign the Petition! > > For the interested candidates... > > Please join this campaign: http://chn.ge/17A0zXE > I

Re: [OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user

It is a bug. CLI to Pub and enter this command: run sql update processconfig set paramvalue="T" where paramname like '%nstalled%' Do this before you go into users I do it in the beginning of the labs since it is always an issue with the proctor labs Racks EF On Mon, Jul 1, 2013 at 12:04 AM, A

Re: [OSL | CCIE_Voice] fast start H323

Also on CM side with h245/h225 trace on this is the out F/S 05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128): FastStartInfo: Outbound FastStart Triggered - PreAllocating MTP| There is a similar message for inbound. Edgar On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz wrote

Re: [OSL | CCIE_Voice] fast start H323

Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP: ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A

Re: [OSL | CCIE_Voice] fast start H323 failed

try with MTP) > - MRGL SB assigned to SB-GW H323. > - checked "Inbound Fast start " and "Outbound Fast Start" > > when i call from SB phone to 911 and vice versa. I did not see Fast Start. > > - Can you write correct detailed steps here? > > tks > >

Re: [OSL | CCIE_Voice] fast start H323 failed

, do we need to check both ? as I > try to check one and it also works. > - for test call, incoming to Ip Phone or outgoing doesn't matter ,right ? > What they want in exam In or out ? > > tks > k > > -- > *From:* Edgar Feliz >

Re: [OSL | CCIE_Voice] fast start H323 failed

enough, we still need to "debug h225 asn > 1" ? > > tks > K > > > > -- > *From:* Edgar Feliz > *To:* Karen Johnson > *Cc:* "ccie_voice@onlinestudylist.com" > *Sent:* Thursday, July 4, 2013 6:41:32 PM > >

Re: [OSL | CCIE_Voice] H323 Fast Start

I may be wrong but I do not recall g729 being a requirement. for that task, they are not asking HQ > SB, which would be inter-region, just F/S between CM > R2 = SB phones dial PSTN. Edgar On Mon, Jul 8, 2013 at 8:03 PM, Barrera, Hugo wrote: > Guy’s, > > ** ** > > I used g711 for the codec

Re: [OSL | CCIE_Voice] CUPC client to play voicemail

Also make sure that you have expanded that section in the client. On Mon, Jul 8, 2013 at 4:48 PM, ccie2k12 wrote: > check server health in CUPC, to make voice mail is showing green > > also have you entered the voice mail user id and password in preferences** > ** > > ** ** > > ** ** > >

Re: [OSL | CCIE_Voice] Fast Start

Transcoder? you mean MTP Edgar On Fri, Jul 12, 2013 at 3:45 PM, Karen Johnson wrote: > > tks , > > so what is the Transcoder use for Fast start here? > > K > *From:* myfriend myfriend > *To:* Karen Johnson > *Cc:* ccie_voice@onlinestudylist.com > *Sent:* Friday, July 12, 2013 12:45:35 AM >

Re: [OSL | CCIE_Voice] file tail activelog

put a / and hit enter On Fri, Jul 12, 2013 at 4:33 PM, Karen Johnson wrote: > when we do : file tail activelog /cm > > - what command to do HELP, if we forgot what is the next directory ? > > K > > > ___ For more information regarding industry leadi

Re: [OSL | CCIE_Voice] Fast Start

For F/S on site B you do not need the transcoder just MTP. Typical : max session 100 would work. On Sat, Jul 13, 2013 at 1:16 AM, IE Target wrote: > Ya > MRGL_FS Contains MRG_FS which contains SB_Xcode and SB_MTP (G711) > > dspfarm profile 1 mtp > associate application sccp > codec g711ulaw

Re: [OSL | CCIE_Voice] Unity Customization

you have to set this parameter to "TRUE" in CUCM service parameters Display Original Calling Number on Transfer from Cisco Unity [image: Required Field] True False False On Thu, Jul 25

Re: [OSL | CCIE_Voice] call-manager fall back issue

Bug!!! IOU have to restart the router. Edgar Sent from my iPhone On Jul 28, 2013, at 9:10 AM, Todd Carswell wrote: > Were the phones registered to CM with DNs assigned BEFORE they failed over to > SRST? > > --Todd > > On Jul 28, 2013, at 5:56, IE Target wrote: > >> Facing this issue pl

Re: [OSL | CCIE_Voice] call-manager fall back issue

Register phones back to CM before restarting. Sent from my iPhone On Jul 28, 2013, at 9:10 AM, Todd Carswell wrote: > Were the phones registered to CM with DNs assigned BEFORE they failed over to > SRST? > > --Todd > > On Jul 28, 2013, at 5:56, IE Target wrote: > >> Facing this issue pl

Re: [OSL | CCIE_Voice] MGCP fail over

It should be valid if the Question asked for a specific order for that GW. EF On Mon, Jul 29, 2013 at 1:02 PM, Alex Mendoza wrote: > Hi All > > I configured BR1 as a MGCP gateway, and is working good. > > Call takes Bchan 1 on incoming and outgoing calls. > > My doubts are with mgcp-fallback.

Re: [OSL | CCIE_Voice] Mailbox Transfer

I just put the VM ports in my HQ CSS and did not have to make any other changes. Edgar On Sun, Aug 25, 2013 at 4:52 PM, Barrera, Hugo wrote: > Hi, > > ** ** > > When a caller from the pstn hits the SiteA User 1 mailbox and can press 9 > to dial out I usually create a "vm-css" that only has

Re: [OSL | CCIE_Voice] Is the CCIE voice worth anymore?

Drake I can tell you that there is a big push to put more services in the cloud at major SPs. UCS platforms has made it easier to host multiple customers in a multi-tenant environment and provide customers their own dedicated voice and video application customized to each customer. Video is defin

  1   2   >