Hi Aman,
1) There have been no ephones created prior to going into srst
2) Also ephone-template and ephone-dn-template created before going into
srst.
3) still we see the above issue
4)Also the Xfer-to-VM line on the site C phone does not get downloaded to
srst mode when the phone goes into
hi All,
I have the following config for srst...
telephony-service
srst mode auto-provision all
srst dn line-mode octo
max-ephones 10
max-dn 10
ip source-address cme ip address port 2000
live-record 4700
voicemail 4220
max-conferences 8 gain -6
moh music-on-hold.au
transfer-system
hi Guys,
In srst I use the following config...
telephony-service
srst mode auto-provision all
srst dn line-mode octo
1)Do I also need to configure srst dn template srst ephone template ?
2)what are best practices for setting up the cue in srst mode ? If possible
include details of..
-mwi
Calder?n ids.calde...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME-SRST
Message-ID:
CAMJQQQ=
7mrfcpd0dcjwcqkmwkhujk7py4zgwyohxm-iby9s...@mail.gmail.com
Content-Type: text/plain; charset=iso-8859-1
Hi,
When I configure CME-SRST and I apply
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ivan Darío Sánchez
Calderón
Sent: Sunday, March 24, 2013 2:50 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME-SRST
Hi,
When I configure CME-SRST and I apply an ephone-template to a phone, I reset
the phone and when
Bug you do not want to reset phones in SRST mode. It is for this reason
that it would be recommended to test your SRST early in the lab , write
mem, reload and not do SRST again.
CME as SRST was new in these releases and is known to be very buggy.
On Sunday, March 24, 2013, Ivan Darío Sánchez
Hi, thanks for your help
yes I have the type on the ephone, the way that I found to fix the problem
is copyin the configuraton on notepad, removing the telephony-service and
putting back again the configuration in the router, the line appears again
on the phone and the ephone template takes
HI Guys,
I have configured cme-srst on my router tonbsp; support phonesnbsp; amp;
gateway functionnbsp; when the wan is down and when my mgcp gateway unreg from
callmanger. Now the requirement is that voicemail forwarding using CUE should
work between ip phones as well as PSTN calls and that
Hi,
I am testing a scenario, where in I should be able to forward calls to
voicemail while in SRST only for selected phones. I am using
telephony-service, and srst mode auto-provision none.
Currently for all the the phones Voicemail is working using below config.
telephony-service
You won't be able to accomplish that requirement with provision none.
You need at least provision dn and then configure the forwarding on the
dns individually, or use call-manager-fallback and then use the alias
command for forwarding.
Cheers.
On Mon, May 30, 2011 at 12:29 AM, Vinay Kumar6
Kobelski [findko...@gmail.com]
Skickat: den 9 april 2011 20:57
Till: ccie_voice@onlinestudylist.com
Ämne: [OSL | CCIE_Voice] CME SRST: calling name configuration
Hello,
I was playing with CME SRST today and I encountered the same issue again. I
configured CME SRST with srst mode auto-provision all
@onlinestudylist.com
*Ämne:* [OSL | CCIE_Voice] CME SRST: calling name configuration
Hello,
I was playing with CME SRST today and I encountered the same issue again. I
configured CME SRST with srst mode auto-provision all.
Phones reregistered to SRST correctly, ephone and ephone-dn configuration
*Ämne:* Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Can you check the firmware versions?
Are they compatible with CME?
I had similar issue which turned out to be a firmware problem
-Shikhar
2011/4/11 Roger Källberg roger.kallb...@cygate.se
mailto:roger.kallb...@cygate.se
Hi
:* |\___sHiKHar___/| [shikhar...@gmail.com]
*Skickat:* den 11 april 2011 12:44
*Till:* Roger Källberg
*Kopia:* Miron Kobelski; ccie_voice@onlinestudylist.com
*Ämne:* Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Can you check the firmware versions?
Are they compatible with CME?
I had
: adam compton com...@gmail.com
To: Miron Kobelski findko...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Message-ID: BANLkTi=on9m68hqixawb+3v2jgrgavb...@mail.gmail.com
Content-Type: text/plain; charset=iso-8859-1
I've had the same
)
--
Message: 1
Date: Sat, 9 Apr 2011 23:41:40 -0400
From: adam compton com...@gmail.com
To: Miron Kobelski findko...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Message-ID: BANLkTi
Regards
Claude
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com on behalf of Stern, Larry
Sent: Sun 4/10/2011 2:37 PM
To: Stern, Larry; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Found the Bug with SRST
findko...@gmail.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Message-ID: BANLkTi=on9m68hqixawb+3v2jgrgavb...@mail.gmail.com
Content-Type: text/plain; charset=iso-8859-1
I've had the same problem. I never knew what to think
CME 7 Admin Guide Talks about such restriction and mentions prebuilding
configuration to provide service similar to that during normal operation, on
page 1234.
If i want names as in CUCM then I use mode autoprovision none and prebuild
my ephone dn's with the names as needed
On 9 April 2011
Hello,
I was playing with CME SRST today and I encountered the same issue again. I
configured CME SRST with srst mode auto-provision all.
Phones reregistered to SRST correctly, ephone and ephone-dn configuration
appeared in the config. By default, each ephone-dn is configured with CUCM
external
I've had the same problem. I never knew what to think of it. I assumed
that's just how it works.
On Sat, Apr 9, 2011 at 2:57 PM, Miron Kobelski findko...@gmail.com wrote:
Hello,
I was playing with CME SRST today and I encountered the same issue again. I
configured CME SRST with srst mode
Hi gangs,
I can not seem to get the ephones to register with their assigned
DN's. Tried all types of srst mode auto-pro commands. Someone please
give me a sanity check.
!
telephony-service
sdspfarm units 5
sdspfarm tag 1 SC-CFB
no privacy
conference hardware
srst mode auto-provision none
Is your ip source address on the phones config as the srst? Is that interface
up/up? Ntp status?
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Wed, Jul 14, 2010 6:20 pm
Subject: [OSL | CCIE_Voice] CME SRST Mode
To: ccie_voice@onlinestudylist.com CCIE_Voice
ccie_voice-boun...@onlinestudylist.com
Date: Wed, 14 Jul 2010 15:20:27
To: ccie_voice@onlinestudylist.comCCIE_Voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME SRST Mode
Hi gangs,
I can not seem to get the ephones to register with their assigned
DN's. Tried all types of srst mode auto
-Original Message-
From: ccieid1ot ccieid...@gmail.com
Sender: ccie_voice-boun...@onlinestudylist.com
ccie_voice-boun...@onlinestudylist.com
Date: Wed, 14 Jul 2010 15:20:27
To: ccie_voice@onlinestudylist.comCCIE_Voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME SRST Mode
...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot
Sent: Wednesday, July 14, 2010 3:54 PM
To: Edwin Dotson
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST Mode
Done that, and phones get
...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST Mode
Done that, and phones get nothing.
On Wed, Jul 14, 2010 at 5:51 PM, Edwin Dotson edot...@ams.net wrote:
Have you tried removing the static ephone configuration? They may be picking
that profile which don't have buttons specified.
Thanks
...@onlinestudylist.com] On Behalf Of ccieid1ot
Sent: Wednesday, July 14, 2010 3:54 PM
To: Edwin Dotson
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST Mode
Done that, and phones get nothing.
On Wed, Jul 14, 2010 at 5:51 PM, Edwin
@onlinestudylist.com;
ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST Mode
Jeff,
same thing. I had it registered back to CCM then failback to SRST.
ccievoice-sitec#show telephony-service ephone-dn
ephone-dn 4 octo-line
number B16A55 no-reg primary
preference 0 secondary 9
Good point.
-Original Message-
From: Randall Saborio [mailto:ill2...@gmail.com]
Sent: Wednesday, July 14, 2010 4:10 PM
To: Jeff Price (jeffpric)
Cc: ccieid1ot; Edwin Dotson; ccie_voice@onlinestudylist.com;
ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST
.
-Original Message-
From: Randall Saborio [mailto:ill2...@gmail.com]
Sent: Wednesday, July 14, 2010 4:10 PM
To: Jeff Price (jeffpric)
Cc: ccieid1ot; Edwin Dotson; ccie_voice@onlinestudylist.com;
ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST Mode
srst
: Re: [OSL | CCIE_Voice] CME SRST Mode
I have definitely had this problem before, but never really figure out why
it happens.
Try this:
Copy your telephony-service config to Notepad
do a no telephony-service
Register the phones with CUCM again
Paste in your telephony-service config
Bring down
); 'ccieid1ot'
Cc: 'ccie_voice@onlinestudylist.com'; ccie_voice-boun...@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CME SRST Mode
Jeff is correct...whenever I have to make a change to CME SRST config,
especially the ephones, I copy all of my related config to notepad and issue
the no telephony
Phones are sccp in cucm?
Sent from my Verizon Wireless Phone
- Reply message -
From: ccieid1ot ccieid...@gmail.com
Date: Wed, Jul 14, 2010 7:53 pm
Subject: [OSL | CCIE_Voice] CME SRST Mode
To: CCIE Voice ccievoiced...@gmail.com
Cc: ccie_voice@onlinestudylist.com CCIE_Voice
PM
To: Jeff Price (jeffpric); 'ccieid1ot'
Cc: 'ccie_voice@onlinestudylist.com'; ccie_voice-boun...@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CME SRST Mode
Jeff is correct...whenever I have to make a change to CME SRST config,
especially the ephones, I copy all of my related config
...@gmail.com]
Sent: Wednesday, July 14, 2010 4:32 PM
To: Jeff Price (jeffpric); 'ccieid1ot'
Cc: 'ccie_voice@onlinestudylist.com'; ccie_voice-boun...@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CME SRST Mode
Jeff is correct...whenever I have to make a change to CME SRST config
?
Thanks
Padhu
- Original Message -
From: Jonathan Charles jonv...@gmail.com
To: Aamir Panjwani aamir.panjw...@ivision.com.au
Cc: ccie_voice@onlinestudylist.com
Sent: Friday, August 07, 2009 10:36 PM
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
Yep, it works fine... sorta
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
And their toe is being gnawed off, especially when they try to fax over it...
You know, SIP might have a chance if there was a governing body saying
This is what you need to be able to do to be called
: Saturday, 8 August 2009 3:26 PM
To: Jonathan Charles
Cc: OSL Group; Michael Ciarfello
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
Whoops, that's what I get for not reading ahead. Don't mind me :)
On Fri, Aug 7, 2009 at 10:25 PM, Tanner Ezell tanner.ez...@gmail.com
wrote:
Another
I can't find any documentation which indicates whether CME SRST support
SIP phones or not? I know normal SRST works fine for SIP phones.
Can someone please point me in the right direction
Thanks
__
This email has
Yep, it works fine... sorta...
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_configuration_guide_chapter09186a0080557e86.html
J
On Fri, Aug 7, 2009 at 8:34 PM, Aamir
Panjwaniaamir.panjw...@ivision.com.au wrote:
I can’t find any documentation which indicates whether CME SRST
@onlinestudylist.com
Sent: Friday, August 07, 2009 10:36 PM
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
Yep, it works fine... sorta...
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_configuration_guide_chapter09186a0080557e86.html
J
On Fri, Aug 7, 2009 at 8:34 PM, Aamir
to simmer on the stove.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie8340tx
[ccie834...@gmail.com]
Sent: Friday, August 07, 2009 11:49 PM
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP
- Original Message -
From: Jonathan Charles jonv...@gmail.com
To: Aamir Panjwani aamir.panjw...@ivision.com.au
Cc: ccie_voice@onlinestudylist.com
Sent: Friday, August 07, 2009 10:36 PM
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
Yep, it works fine... sorta...
http
[ccie834...@gmail.com]
Sent: Friday, August 07, 2009 11:49 PM
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
While we are on the topic of SIP:
Has anyone really run into a customer/enterprise with a large SIP
implementation? If yes, Why ?
Thanks
Padhu
- Original
10:36 PM
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
Yep, it works fine... sorta...
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_configuration_guide_chapter09186a0080557e86.html
J
On Fri, Aug 7, 2009 at 8:34 PM, Aamir
Panjwaniaamir.panjw
PM
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
While we are on the topic of SIP:
Has anyone really run into a customer/enterprise with a large SIP
implementation? If yes, Why ?
Thanks
Padhu
- Original Message -
From: Jonathan Charles jonv
...@onlinestudylist.com [
ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie8340tx [
ccie834...@gmail.com]
Sent: Friday, August 07, 2009 11:49 PM
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] CME SRST for SIP phones
While we are on the topic of SIP:
Has anyone really run
48 matches
Mail list logo
