Mike,have you bought any front end parts for your 67 yet? If not,are you
planning a spindle change? The only tall spindle I would consider would be
the forged alum AFX units from ATS. These are the cat's meow but are very
pricey at around $800 w/steering arms and they also require C5/C6 Corvette
br
Jim. I'm just installing a factory GM setup for
now.
- Original Message -
From:
Jim H.
Thompson
To: The Chevelle Mailing List
Sent: Monday, May 22, 2006 8:32 PM
Subject: Re: [Chevelle-list] Front
Suspension - Brake Conversion
What
type of spindl
What type
of spindle are you going to use? There are kits out there now that allow you to
use the stock spindle. Check with In Line Tube they had a nice set up at the
super Chevy show at MIR.
-Original
Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On
Behalf Of Larr
Thanks guys for your input. I'll go rent a
spring compressor at Autozone.
Larry
- Original Message -
From:
Rick Schaefer
To: The Chevelle Mailing List
Sent: Monday, May 22, 2006 11:10 AM
Subject: Re: [Chevelle-list] Front
Suspension - Brake Conve
Absolutely. You can borrow a compressor from an auto store, the compressed springs have too much stored energy to do without. It can be done without but its much more dangerous.
There are several web sites available with complete details & pictures. A few are listed in the WORKSHOP sec
I would definitely
try to borrow or rent a spring compressor setup. They can become deadly projectiles
when the lower control arms are dropped
Dale McIntosh
67 El Camino
1967 Chevelle Reference CD
http://www.chevellecd.com
ACES #1709/TC Gold #92
From: [EMAIL PROTECTED]
[
Yes, Larry. Be super careful. Compress it down "some"!
to the point where it's loose. Loosen the Castle nut
on the upper Ball Joint. Bang on the spindle and it
will fall off the taper. Finish the loosening and
remove the spring. Immediately un-tension the spring.
Don't leave it in the spring compre
OTECTED] On Behalf Of RJ Winkler
> Sent: Saturday, March 12, 2005 4:05 PM
> To: 'The Chevelle Mailing List'
> Subject: RE: [Chevelle-list] Front Suspension
>
>
>
> Dale,
>
> I have a regular 69 chevelle Malibu, no ac, drum brakes, stand. Suspension,
>
7;The
Chevelle Mailing List'
Subject: RE: [Chevelle-list] Front
Suspension
Dale,
I have a regular 69 chevelle Malibu, no ac, drum
brakes, stand. Suspension, 350 v8 -RJ Winkler
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Dale
Sent: Saturday, March 12, 2005
3:07 P
Dale,
I have a regular 69 chevelle Malibu, no ac, drum
brakes, stand. Suspension, 350 v8 -RJ Winkler
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Dale
Sent: Saturday, March 12, 2005
3:07 PM
To: 'The Chevelle Mailing List'
Subject: RE: [Chevelle-l
Yes and no, depends on the year and
options involved. For example, 1967 shows 25 different front springs for
Chevelles, 5 of those for 138xx (SS) cars; one each for hardtop and
convertible, different spring (but same for both) if either have A/C, and a
different spring yet for both if F40
The front will sit high with the SB in it and BB
springs. It will align though.
- Original Message -
From:
RJ
Winkler
To: 'The Chevelle Mailing List'
Sent: Saturday, March 12, 2005 11:43
AM
Subject: [Chevelle-list] Front
Suspension
Hey
Guys,
ooper
Sent: Friday, June 25, 2004 2:39 PM
To: The Chevelle Mailing List
Subject: Re: Re:[Chevelle-list] Front Suspension HELP [edited]
I always thought 64 to 72 A-body brake parts would interchange,with few
exceptions.
Clint Hooper
H&H Custom,owner
LT5 Registry Director
http://www.LT5Registry.net/
A
I always thought 64 to 72 A-body brake parts would interchange,with few
exceptions.
Clint Hooper
H&H Custom,owner
LT5 Registry Director
http://www.LT5Registry.net/
ACES #1650
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: <[EMAIL PROTECTED]>
Is it re
I always thought 64 to 72 A-body parts would interchange,with few
exceptions.
Clint Hooper
H&H Custom,owner
LT5 Registry Director
http://www.LT5Registry.net/
ACES #1650
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: <[EMAIL PROTECTED]>
Is it really t
My experience has been that the only physical difference is that some come with oval
bushings and some with round bushings on the lowers. Not sure exactly why, could have
been big vs. small block. I've interchanged parts for those years without problems.
My 2 cents.
Gene
> Part number-wise,
Part number-wise, according to my GM parts book:
Group 6.168 ARM ASSY-STRUT, Steering Knuckle Upper and Lower Control Arm
Assy.
64-72 3974217 L.H. upper
3887062 R.H. upper
64-70
71-72 wagon
71-72 (400 w/4bc,454) 3990509 L.H. lower
3990510 R.H. lower
70-71 (exc. 396,400
Ed, Herb and Pete
Thanks Guys, it looks like they will fit then even if they maybe arent 100% correct
bushing-wise.
thanks !
André
> > From: "Herb Lumpp" <[EMAIL PROTECTED]>
> >> 65 and 68 don't interchange. According to Global West 64-67 interchange and
> > 68-72 interchange.
>
> > From: "He
> From: "Herb Lumpp" <[EMAIL PROTECTED]>
>> 65 and 68 don't interchange. According to Global West 64-67 interchange and
> 68-72 interchange.
> From: "Herb Lumpp" <[EMAIL PROTECTED]>
> Hi André,
>
> 65 and 68 don't interchange. According to Global West 64-67 interchange and
> 68-72 interchange.
004 2:52 AM
To: Chevelle-list
Subject: Re:[Chevelle-list] Front Suspension HELP
Thanks alot Brian,
I have already sold the axle so that is ok.
is it really true that nowbody out there knows for sure if 68 front
suspension parts (upper and lower a-arms and spindles) will fit on a 65 ??
Thanks !
ousings are 1 inch
> narrower than that on a '68. Hope this helps.
>
> Brian '71 Malibu
>
>
> >From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
> >Reply-To: The Chevelle Mailing List <[EMAIL PROTECTED]>
> >To: "QTLopez" <[EM
uot;QTLopez" <[EMAIL PROTECTED]>,"Chevelle-list"
<[EMAIL PROTECTED]>
Subject: Re:[Chevelle-list] Front Suspension HELP
Date: Thu, 24 Jun 2004 14:02:20 +0200
Hi All,
I have been contacted by a guy in Sweden who wants to buy my front
suspension and the rear Koni's and re
Hi All,
I have been contacted by a guy in Sweden who wants to buy my front suspension and the
rear Koni's and rear trailing arms.
Now the big Q... will my 1968 parts fit on his 1965 Chevelle??
Ciao
André
Please! Show me the pics!!
Hoss
Hi all,
I have some pictures of the corvette front end installation in my
Chevelle and also one picture of four autometers where the radio once
resided.
If you want to see them drop me a line offline and I'll send them to you
from my offi
hello, I would like to see the pics, thanks
Jason
- Original Message -
From: "Tigergutt" <[EMAIL PROTECTED]>
To: "'The Chevelle Mailing List'" <[EMAIL PROTECTED]>
Sent: Tuesday, March 02, 2004 4:46 PM
Subject: RE: [Chevelle-list] Front suspensi
CTED]>
Sent: Tuesday, March 02, 2004 4:46 PM
Subject: RE: [Chevelle-list] Front suspension done
Hi all,
I have some pictures of the corvette front end installation in my
Chevelle and also one picture of four autometers where the radio once
resided.
If you want to see them drop me a line offline a
Hi all,
I have some pictures of the corvette front end installation in my
Chevelle and also one picture of four autometers where the radio once
resided.
If you want to see them drop me a line offline and I'll send them to you
from my office (faster line)
Full Revs!!!
:o)
André
PROTECTED]
> >To: <[EMAIL PROTECTED]>
> >Subject: RE: [Chevelle-List] front suspension
> >Date: Fri, 26 Apr 2002 10:14:25 -0700
> >
> > > From: [EMAIL PROTECTED]
> > > Subject: Re: [Chevelle-List] front suspension
> > >
> > > I could need
> > would I need to redrill the rotors to 4,75"
>
> Either way, you should not need to redrill anything,
> as the rotors all use the same bolt spacing.
That's not entirely accurate. When I did the 12" rotor swap, the donor car
I used was an '87 Pontiac station wagon and the rotors had a 5" bolt
TED]
>To: <[EMAIL PROTECTED]>
>Subject: RE: [Chevelle-List] front suspension
>Date: Fri, 26 Apr 2002 10:14:25 -0700
>
> > From: [EMAIL PROTECTED]
> > Subject: Re: [Chevelle-List] front suspension
> >
> > I could need some info on 12" disc brakes an
> From: [EMAIL PROTECTED]
> Subject: Re: [Chevelle-List] front suspension
>
> I could need some info on 12" disc brakes and tall spindles.
> How much better is this setup than the standard parts
> which are the cars I could take them from ?
The 12" tall spindle set
On Fri, 26 Apr 2002 16:58:01 +0200 [EMAIL PROTECTED] writes:
> Just came back from a pleasure trip to Norway, It was great with
> loads > of nice weather.> We have 80 degrees here in Italy today, and
guess what that mean ??> BBQ and cold beer after work !!!
> I could need some info on 12" disc br
Hi Guys,
Just came back from a pleasure trip to Norway, It was great with loads
of nice weather.
We have 80 degrees here in Italy today, and guess what that mean ??
BBQ and cold beer after work !!!
I could need some info on 12" disc brakes and tall spindles.
How much better is this setup than
Title: Re: [Chevelle-List] front suspension
on 1/25/02 9:34 PM, Rodney. at [EMAIL PROTECTED] wrote:
Well, like I said, I did it in the backyard. I had a very limited selection of tools :) The only tool I had to buy though was a ball joint seperator (for the one that wasn't broken :) )
Title: Re: [Chevelle-List] front suspension (pics)
Well, like I said, I did it in the backyard.
I had a very limited selection of tools :) The only tool I had to buy
though was a ball joint seperator (for the one that wasn't broken :) ) and I
borrowed spring compressors from a friend
Title: Re: [Chevelle-List] front suspension (pics)
on 1/25/02 8:14 PM, Rodney. at [EMAIL PROTECTED] wrote:
Kevin,
I just realized, I think you were talking to Jason when you said you saw the before pics. I wondered where and how you could have seen my pics :)
Rodney
Title: Re: [Chevelle-List] front suspension (pics)
on 1/25/02 8:14 PM, Rodney. at [EMAIL PROTECTED] wrote:
Kevin,
I just realized, I think you were talking to Jason when you said you saw the before pics. I wondered where and how you could have seen my pics :)
Rodney
To: [EMAIL PROTECTED]
Sent: Friday, January 25, 2002 6:09
PM
Subject: RE: [Chevelle-List] front
suspension
Hey
Rodney,
I
would love to see how your Car turned out.. I looked at the page and I
see the before pics.. where are the after pics?
Once
ecko.gc.maricopa.edu/~rrstalna/
Rodney.
71 Chevelle
Phoenix, AZ
- Original Message -
From:
Kevin M.
Bowman
To: [EMAIL PROTECTED]
Sent: Friday, January 25, 2002 6:09
PM
Subject: RE: [Chevelle-List] front
suspension
Hey
Rodney,
I
would love to se
to mine.. just wait and see...
Kevin
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Rodney.Sent: Friday, January 25, 2002 7:55 PMTo:
[EMAIL PROTECTED]Subject: Re: [Chevelle-List] front
suspension
Isn't it awesome? I couldn't believ
Title: RE: [Chevelle-List] chevellelist -unsubscribe
Isn't it awesome? I couldn't believe how much
better my car handled after rebuilding the front end. The only thing
better than that was when I switched to 12" front discs
:) (Couldn't afford to do both at the same time)
Rodney.
Replies to this message are sent to The Chevelle Mailing List
Fatman fabrications!
P. Hernandez
68 chevelle
42 matches
Mail list logo
