The fuse has nothing to do with the brakes. Check the brake light switch on
the pedal bracket. The wires going to the switch maybe rubbing and grounding
out.
You could bypass the block and use an inline fuse. The short could be at one
of the bulb sockets. Try tracing the short with a probe
Looking at a Camaro in Illinois, about 100 miles west of Chicago.
Any good inspection people in that area?
Dont worry, not giving up my 70 SS!
Thanks,
Ed
The car is a 1970 Chevelle that I need info on the spare tire anchor.
Thanks guys. I don't post much, but I've gotten some good help on a lot of
topics here.
- Original Message
From: chevelle-list-requ...@chevelles.net
chevelle-list-requ...@chevelles.net
To:
I'm sure there are a lot of good shops in the DFW area. I had Phoenix
Transmissions in Weatherford, TX. do a 4-speed to 700R4 swap and workmanship
was top notch.
http://www.phoenixtrans.com/
Dale
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On
What Dale said!
On Tue, Nov 2, 2010 at 10:29 PM, Dale a396...@fidnet.com wrote:
I’m sure there are a lot of good shops in the DFW area. I had Phoenix
Transmissions in Weatherford, TX. do a 4-speed to 700R4 swap and workmanship
was top notch.
http://www.phoenixtrans.com/
Dale
Roger,
What year is your Chevelle?
--
From: Roger Griggs homealone4...@yahoo.com
Sent: Monday, November 01, 2010 5:54 PM
To: chevelle-list@chevelles.net
Subject: [Chevelle-list] Spare Tire Anchor
I had a trunk floor put in my chevelle and I
What year? I am sure someone on the list can send a photo.
-Original Message-
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Roger Griggs
Sent: Monday, November 01, 2010 6:54 PM
To: chevelle-list@chevelles.net
Subject: [Chevelle-list]
Check here: http://www.ajgeneral.com/bbc_block_casting_numbers/ Shows
289 to be anthing from vette to truck from 72 to 79.
Or here:
http://www.nastyz28.com/bbcmenu.php Google is your friend [?]
On Sun, Oct 31, 2010 at 7:05 AM, Malibu 327mal...@gmail.com wrote:
I need help on id
Sender: chevelle-list-boun...@chevelles.net
Date: Mon, 25 Oct 2010 18:51:32
To: The Chevelle Mailing Listchevelle-list@chevelles.net
Reply-To: The Chevelle Mailing List chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Exhaust gaskets (Donuts) Help!
I need help on id #'s for my 468 big
From: bluess...@comcast.net
To: chevelle-list@chevelles.net
Date: Sun, 24 Oct 2010 19:44:31 -0400
Subject: Re: [Chevelle-list] Quarters
Goodmark used to make them, now they use Golden Star, Dynacorn uses Golden
Legion. AMD is also now producing some Chevelle metal. None
Thanks guys I guess the Goodmark panels are a good bet. Im in Texas. So Ill try
to find a good price now?
Henry Kubacki
In God We Trust
From: dansolo...@msn.com
To: chevelle-list@chevelles.net
Date: Mon, 25 Oct 2010 09:37:50 -0400
Subject: Re: [Chevelle-list] Quarters
I just used
the Goodmark panels are a good bet. Im in Texas. So
Ill try to find a good price now?
Henry Kubacki
In God We Trust
From: dansolo...@msn.com
To: chevelle-list@chevelles.net
Date: Mon, 25 Oct 2010 09:37:50 -0400
Subject: Re: [Chevelle-list] Quarters
I just
Im in Fort Worth/Arlington line off 30 and 820? Yeah that would be great to
save on shipping.
Henry Kubacki
In God We Trust
From: tinindia...@aol.com
Date: Mon, 25 Oct 2010 14:21:19 -0400
To: chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Quarters
Where in Texas? I got
To: chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Quarters
Where in Texas? I got mine from a place in Frisco, north of Dallas, I
picked up and saved on shipping, sorry can't remember the name, I bought off
the computer.
In a message dated 10/25/2010 12:45:47 P.M. Central Daylight
On Mon, Oct 25, 2010 at 12:09:45PM -0500, Rick Schaefer wrote:
We should hear no more of him. Just got an email from Al and he had
enough access to delete the account.He also said that the Mailing List was
part of the sale and theDon should have been able to take care of it.
Sale?
I need help on id #'s for my 468 big block i tried mortec but i cannot find them
engine # 3999289
cyl head # 3873858
cyl head # 3919840
--- On Mon, 10/18/10, Jim Thompson jimthompso...@gmail.com wrote:
From: Jim Thompson jimthompso...@gmail.com
Subject: Re: [Chevelle-list] Exhaust gaskets
Great news!
Glad the PITA is gone.
I was ready to unsubscribe but have been on here for years and always enjoy,
even if I mostly lurk.
How does that unsubscribe work again?
NO NO I didn't ask the question.
Thanks for stepping up.
Bob Belz
- Original Message -
From: Rick
I bought my lower quarters and front fenders from Year One on the advice of my
bodyshop. They still had to make minor repairs to shipping damage but that was
faster then returning those for a replacement. They said you're lucky to get
something that large shipped without some dents/bumps.
Thanks Steve I appreciate the help.
Henry Kubacki
In God We Trust
From: ste...@htc.net
To: chevelle-list@chevelles.net
Date: Sun, 24 Oct 2010 16:53:39 -0500
Subject: Re: [Chevelle-list] Quarters
I bought my lower quarters and front fenders from
Year One on the advice of my
Kubacki henrykuba...@msn.com wrote:
Thanks Steve I appreciate the help.
*Henry Kubacki
In God We Trust
*
--
From: ste...@htc.net
To: chevelle-list@chevelles.net
Date: Sun, 24 Oct 2010 16:53:39 -0500
Subject: Re: [Chevelle-list] Quarters
*I bought my
PM, Henry Kubacki henrykuba...@msn.com
wrote:
Thanks Steve I appreciate the help.
Henry Kubacki
In God We Trust
_
From: ste...@htc.net
To: chevelle-list@chevelles.net
Date: Sun, 24 Oct 2010 16:53:39 -0500
Subject: Re: [Chevelle-list] Quarters
I bought my lower quarters
Unfortunately it will get to the point that some will choose to leave the list.
What a shame.
As for the Chevelle, I hope to still be able to squeeze in a few more weeks.
Thanks, Dan
--
Sent using BlackBerry
-Original Message-
From: Bob n Cheri robertb...@msn.com
I just went on a business trip for a month, so the Chevelle is under a
cover. At least I have some work planned for the winter.
Dan
On Sat, Oct 23, 2010 at 5:40 PM, Dan Solomon dansolo...@msn.com wrote:
Unfortunately it will get to the point that some will choose to leave the
list. What a
May be hot as Hell in the summer, but we can drive our Chevelles all
winter , except in rain, down here in Texas. We don't know what that white
stuff
is on the coast. I don't put mine up for the winter.
In a message dated 10/23/2010 2:31:28 P.M. Central Daylight Time,
robertb...@msn.com
The junk mail keeps getting through because the email is coming to you from the
Chevelle list, so the only way to block it would be to block
chevelle-l...@chevelle.net email address. At this point its up the
administrator of the list to block/remove him.
You might be able to create a Rule
It's the GR8 Pumpkin!
Sent on the Sprint® Now Network from my BlackBerry®
-Original Message-
From: Rick Schaefer ric...@gmail.com
Sender: chevelle-list-boun...@chevelles.net
Date: Fri, 22 Oct 2010 00:52:47
To: The Chevelle Mailing Listchevelle-list@chevelles.net
Reply-To: The Chevelle
Looks pretty close, doesn't it? I've seen the car on eBay several times but
never got past the alligator theme.
Dale
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Rick Schaefer
Sent: Friday, October 22, 2010 12:53 AM
To: The Chevelle
Good Morning Jim,
I would recommend that you use an agent like myself. The premium is the same
with or without an agent and there are a few companies that sell exclusively
through agents. We can check Hagerty, Grundy, and several other companies
for you. Check us out at www.LaRueClassics.com
I've used Alex for about 5 or 6 years. Personal service at a very
reasonable price.
On Tue, Oct 19, 2010 at 7:27 AM, Alex LaRue a...@larueinsurance.net wrote:
Good Morning Jim,
I would recommend that you use an agent like myself. The premium is the
same with or without an agent and
Check with Alex Larue, a Chevelle owner and all-around good
guy. 800-303-3518 , 270-358-3101
BillL
At 06:03 AM 10/19/2010, you wrote:
It is time to insure and get my 72 Chevelle on the road. Any
recommendations on companies? I know Hagerty and Grundy are both
pretty well know. Any
-
From: Jim Thompson jimthompso...@gmail.com
To: The Chevelle Mailing List chevelle-list@chevelles.net
Sent: Friday, October 15, 2010 8:28:51 PM
Subject: Re: [Chevelle-list] Exhaust gaskets (Donuts) Help!
I never had a gasket fall apart. I suggest new studs, use brass nuts, and
locktite
-
From: Jim Thompson jimthompso...@gmail.com
To: The Chevelle Mailing List chevelle-list@chevelles.net
Sent: Friday, October 15, 2010 8:28:51 PM
Subject: Re: [Chevelle-list] Exhaust gaskets (Donuts) Help!
I never had a gasket fall apart. I suggest new studs, use brass nuts, and
locktite
@chevelles.net
Sent: Monday, October 18, 2010 10:13:35 AM
Subject: Re: [Chevelle-list] Exhaust gaskets (Donuts) Help!
Thanks guys. I have been letting the shop handle this part and it sounds like I
just need to take charge and do it myself. I will repost once I have taken
everything down.
Ed
: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Rich Pruett
Sent: Monday, October 18, 2010 6:26 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Exhaust gaskets (Donuts) Help!
Retorqueing after thermal cycling is a good idea but not brass nuts
once i put a new engine in my car, and then put anti-seize on the studs on
the lower exhaust manifold, and i too had the donut leaking problem, but it
was because it kept loosening up due to the anti-seize. - which in turn then
blow them out
Harlan
On Fri, Oct 15, 2010 at 08:01:02AM -0700, Lee Hester wrote:
http://xx.html
Is this list moderated? If so, why is this being tolerated?
--
Bob Holtzman
Key ID: 8D549279
If you think you're getting free lunch,
check the price of the beer
, October 12, 2010 5:03 PM
To: chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Exhaust gaskets (Donuts) Help!
I am having a tough time keeping the donut gasket between the manifold and
the exhaust pipe from disintegrating. After installation, it takes about 3-4
months of very little
Thanks for the update. I did a short search for somebody to contact about this
(and came up with zero results) but did not spend a lot of time on it.
Thanks again.
From: chevelle-list-requ...@chevelles.net
Subject: Chevelle-list Digest, Vol 87, Issue 12
To: chevelle-list@chevelles.net
I am having a tough time keeping the donut gasket between the manifold and
the exhaust pipe from disintegrating. After installation, it takes about
3-4 months of very little driving and they start leaking again.
I have been told that there are metal gaskets (poss copper?) and regular
donut
On Sat, Oct 09, 2010 at 02:46:51PM -0500, Ken Lyman wrote:
Thanks Rick...something had to be done. Thanks for stepping up to the
plate to take care of it.
All the links went to Canadian Pharmacys, I would assume for internet drug
sales. I never checked to any of them, not sure if they
--
Message: 2
Date: Sat, 9 Oct 2010 00:44:06 -0500
From: Rick Schaefer ric...@gmail.com
To: The Chevelle Mailing List chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] (no subject)
Message-ID:
aanlktimx-zb7f37xngbpc5t1lbnosuppt5upsbiey...@mail.gmail.com
Content-Type: text
On Thu, Oct 07, 2010 at 02:24:33PM -0700, Robert Holtzman wrote:
On Thu, Oct 07, 2010 at 11:00:25AM -0700, Lee Hester wrote:
x
The address this stuff is coming from needs to be unsubscibed. It's
either a hijacked computer or a throw away address sending
I sent a PM to TheDon over at Team Chevelle. Asked him to remove the
account. Hopefully will get results - but I'm not holding my breathe.
On Fri, Oct 8, 2010 at 9:39 PM, Lee Hester chevelle...@hotmail.com wrote:
http://dipseo.zxq.net/und6.html
--
Rick Schaefer
72 TPI El Camino
On Thu, Oct 07, 2010 at 11:00:25AM -0700, Lee Hester wrote:
http://www.iessecomputer.it/und6.html
The address this stuff is coming from needs to be unsubscibed. It's
either a hijacked computer or a throw away address sending viruses.
--
Bob Holtzman
Key ID: 8D549279
If you think you're
:
Larry Williams
To: The Chevelle Mailing List
Sent: Tuesday, October 05, 2010 11:32
PM
Subject: Re: [Chevelle-list] Fwd: (no
subject)
Yep. And this guy doesn't respond.
On
10/5/2010 8:07 AM, crispe...@aol.com wrote:
dont open them its a
virus
-Original
I've been getting them also but haven't opened any. John
--- On Tue, 10/5/10, harkema...@aol.com harkema...@aol.com wrote:
From: harkema...@aol.com harkema...@aol.com
Subject: [Chevelle-list] Fwd: (no subject)
To: Chevelle-list@chevelles.net
Date: Tuesday, October 5, 2010, 2:00 AM
dont open them its a virus
-Original Message-
From: John Kovach jjflash6...@yahoo.com
To: The Chevelle Mailing List chevelle-list@chevelles.net
Sent: Tue, Oct 5, 2010 8:51 am
Subject: Re: [Chevelle-list] Fwd: (no subject)
I've been getting them also but haven't opened any
Yep. And this guy doesn't respond.
On 10/5/2010 8:07 AM, crispe...@aol.com wrote:
dont open them its a virus
-Original Message-
From: John Kovach jjflash6...@yahoo.com
To: The Chevelle Mailing List chevelle-list@chevelles.net
Sent: Tue, Oct 5, 2010 8:51 am
Subject: Re: [Chevelle
I use the AVAST anti-virus that deletes the file immediately and saves me all
the hassles.
Johann W Grobler
Retired
- Original Message -
From: Larry Williams
To: The Chevelle Mailing List
Sent: Tuesday, October 05, 2010 11:32 PM
Subject: Re: [Chevelle-list] Fwd: (no subject
, October 03, 2010 2:38 PM
To: chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Chevelle-list Digest, Vol 87, Issue 3
Why can't this guy (Lee Hester) be banned from the Chevelle-list?
From: chevelle-list-requ...@chevelles.net
Subject: Chevelle-list Digest, Vol 87, Issue 3
To: chevelle
Why can't this guy (Lee Hester) be banned from the Chevelle-list?
From: chevelle-list-requ...@chevelles.net
Subject: Chevelle-list Digest, Vol 87, Issue 3
To: chevelle-list@chevelles.net
Date: Sun, 3 Oct 2010 12:00:01 -0400
Send Chevelle-list mailing list submissions to
...@chevelles.net
Date: Sun, 3 Oct 2010 13:37:56
To: chevelle-list@chevelles.net
Reply-To: The Chevelle Mailing List chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Chevelle-list Digest, Vol 87, Issue 3
Why can't this guy (Lee Hester) be banned from the Chevelle-list?
From
-list@chevelles.net
*Subject: *Re: [Chevelle-list] Chevelle-list Digest, Vol 87, Issue 3
Why can't this guy (Lee Hester) be banned from the Chevelle-list?
From: chevelle-list-requ...@chevelles.net
Subject: Chevelle-list Digest, Vol 87, Issue 3
To: chevelle-list@chevelles.net
Date: Sun, 3
2010 13:37:56 -0500
*To: *chevelle-list@chevelles.net
*ReplyTo: * The Chevelle Mailing List chevelle-list@chevelles.net
*Subject: *Re: [Chevelle-list] Chevelle-list Digest, Vol 87, Issue 3
Why can't this guy (Lee Hester) be banned from the Chevelle-list?
From: chevelle-list-requ
In a message dated 9/30/2010 8:06:42 AM Central Daylight Time,
bdo_ch...@att.net writes:
IIRC the single-letter suffix was in use up until the early 1960s. Does
the engine have an oil filter? According to nastyz28.com F could be a
1955 265 or 1957 283 and the early 265s didn't come with
...@aol.com crispe...@aol.com wrote:
From: crispe...@aol.com crispe...@aol.com
Subject: Re: [Chevelle-list] 66 Chevelle
To: chevelle-list@chevelles.net
Date: Wednesday, September 29, 2010, 10:55 PM
goodmark is the next best thing to gm nos stuff
-Original Message-
From: Mark
and I will do some research.
Larry
- Original Message -
From: HarKemAsso @ aol .com
To: chevelle-list@ chevelles .net
Sent: Thursday, September 30, 2010 11:58:03 PM
Subject: Re: [Chevelle-list] engine Identification
In a message dated 9/30/2010 8:06:42 AM Central Daylight Time, bdo
-
From: Dale a396...@fidnet.com
To: The Chevelle Mailing List chevelle-list@chevelles.net
Sent: Thursday, September 30, 2010 7:43:09 AM
Subject: Re: [Chevelle-list] engine Identification
Brad may be on to it. The 55 56 Chevy 265 and the 57 283 used the single
letter F in the suffix code
-1958.
Dale
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of
z16chevelle...@comcast.net
Sent: Friday, October 01, 2010 5:28 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] engine Identification
Interesting but I can remember
--- On Thu, 9/30/10, harkema...@aol.com harkema...@aol.com wrote:
checked on the number 0552582F56F is the number stamped ahead of the rt
cyl head, on the block, there are no spaces, the engine is in a 55 chevy,
and is a small block, the valve covers have chevrolet written out on
them (the
Message-
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of bdo_ch...@att.net
Sent: Thursday, September 30, 2010 7:40 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] engine Identification
--- On Thu, 9/30/10, harkema...@aol.com
-
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of bdo_ch...@att.net
Sent: Thursday, September 30, 2010 7:40 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] engine Identification
--- On Thu, 9/30/10, harkema...@aol.com harkema
Harlan,
What other infomation do you have? How about casting numbers and date codes
from the block?
Thanks, Dan
--
Sent using BlackBerry
-Original Message-
From: harkema...@aol.com
Sender: chevelle-list-boun...@chevelles.net
Date: Wed, 29 Sep 2010 03:35:06
To:
Are these cast or stamped? Are they all one contiguous character set?
Where are they located?
Dale
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of harkema...@aol.com
Sent: Wednesday, September 29, 2010 2:35 AM
To:
In a message dated 9/29/2010 9:59:03 AM Central Daylight Time,
a396...@fidnet.com writes:
Are these cast or stamped? sorry, they are stamped on the top of the block
by the front of the passengers side head Are they all one contiguous
character set? no there was a space, a friend read
goodmark is the next best thing to gm nos stuff
-Original Message-
From: Mark Tibbits mtibb...@cox.net
To: The Chevelle Mailing List chevelle-list@chevelles.net
Sent: Wed, Sep 29, 2010 5:54 pm
Subject: [Chevelle-list] 66 Chevelle
Is there anybody that is a goodmark dealer of sheet
Ed,
I was thinking about that too. Just made up a tool using some all-thread and a
block of steel.
If it doesn't work, that will be my next attempt.
Thanks, Dan
Date: Mon, 20 Sep 2010 09:39:35 -0700
Subject: Remove control arms?
From: e...@thrashermagazine.com
To: dansolo...@msn.com
Subject: Re: [Chevelle-list] Quadrajet parts needed
Call Seme Son in Cleveland,Ohio at 1-800-282-0991. John
--- On Fri, 9/17/10, Rich Pruett busted_knuck...@comcast.net wrote:
From: Rich Pruett busted_knuck...@comcast.net
Subject: [Chevelle-list] Quadrajet parts needed
To: The Chevelle
Try Advance auto Parts, they rent tools. Also try putting the compressors on
the outside of the coil.
Dan
On Sat, Sep 18, 2010 at 8:26 AM, Dan Solomon dansolo...@msn.com wrote:
I have the motor and trans out of a 71 and the last item I need to remove
are the control arms. Typically I use a
--
Sent using BlackBerry
-Original Message-
From: Dan Rachlin rodi...@gmail.com
Date: Sat, 18 Sep 2010 08:46:05
To: dansolo...@msn.com; The Chevelle Mailing Listchevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Coil Spring Compressors
Try Advance auto Parts, they rent
Call Seme Son in Cleveland,Ohio at 1-800-282-0991. John
--- On Fri, 9/17/10, Rich Pruett busted_knuck...@comcast.net wrote:
From: Rich Pruett busted_knuck...@comcast.net
Subject: [Chevelle-list] Quadrajet parts needed
To: The Chevelle Mailing List chevelle-list@chevelles.net
Date:
hope
this helps.
Chum Nault
_
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Dan Solomon
Sent: Saturday, September 18, 2010 8:32 AM
To: Chevelle List
Subject: Re: [Chevelle-list] Coil Spring Compressors
Advance
That's a great idea!
Thanks, Dan
--
Sent using BlackBerry
-Original Message-
From: Chum Nault c...@jimolsonmotors.com
Date: Sat, 18 Sep 2010 09:53:35
To: dansolo...@msn.com; 'The Chevelle Mailing
List'chevelle-list@chevelles.net
Subject: RE: [Chevelle-list] Coil
Also 10% from TheElCamino Store. code is PRF, good thru the weekend.
On Fri, Sep 17, 2010 at 4:51 AM, Rich Pruett busted_knuck...@comcast.netwrote:
FYI
Just think, if it weren't for marriage, men would go through life thinking
they had no faults at all.
You can only be young once. But
A.J,
I am not aware of any codes right now but have always gotten great prices from
Classic Muscle.
They are located in NC and for me parts arrive in one day. Also my experience
is that their prices are better that other without a discount code.
Their website is www.oldmusclecars.com
Dan
Year one code is WEBDAY Ends Midnight TONITE (SUNDAY)
On Sun, Sep 12, 2010 at 12:57 PM, Dan Solomon dansolo...@msn.com wrote:
A.J,
I am not aware of any codes right now but have always gotten great prices
from Classic Muscle.
They are located in NC and for me parts arrive in one day. Also
Not sure where you store your car, but if it is inside like mine, i have
been buying the grey Menards covers, they are like 20.00, and work fine, I
have also bought the Technalon from Cover Craft (beige in color) for some of my
cars, they fit very nice and look nicer sitting there with the
-To: The Chevelle Mailing List chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] Car Covers
Not sure where you store your car, but if it is inside like mine, i have
been buying the grey Menards covers, they are like 20.00, and work fine, I
have also bought the Technalon from Cover Craft (beige
- Original Message -
From: Bob n Cheri
To: chevelle-list
Sent: Saturday, August 07, 2010 6:26 PM
Subject: [Chevelle-list] Quick time Electric Cutouts
Does or has anyone used the Quick Time Electric cutouts instead of the caps
on on your exhaust systems?
I'm thinking
-boun...@chevelles.net] On Behalf Of bill
Sent: Sunday, August 08, 2010 7:55 AM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] Quick time Electric Cutouts
- Original Message -
From: Bob n Cheri mailto:robertb...@msn.com
To: chevelle-list mailto:chevelle-list
I have tall Moroso valve covers on my 71 with a 454 and a stock brake
booster. There isn't a lot of clearance, but enough.
_
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Charlie K
Sent: Sunday, August 08, 2010 5:27 PM
To: The
Russ Miesner wrote:
I am now close to starting on my 65 Chevelle drivetrain upgrade. I
am stroking my 350 to a 383. I have purchased a 700R4 trans. I
intend to go with disc front brakes and rebuild my rear drums. The
rearend is getting overhauled and I am putting in 3.55 gears with a
I have used Doug Thorley Tri-Y headers ( model 375Y) and am very happy with
fit. I bought them 15 years ago uncoated and had them coated. The Try-Y
headers are suppose to be beneficial for a street vehicle. I think that
they have a coated version now.
On Sat, Aug 7, 2010 at 11:31 AM, Larry
Thank you for not using the moronic term fitment.
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of Rick Schaefer
Sent: Saturday, August 07, 2010 1:13 PM
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list] ceramic headers
I have used
In a message dated 7/31/2010 12:42:14 PM Central Daylight Time,
chakev...@comcast.net writes:
Which side is up to the sky?the side with the writing on it.There is a
side that has metal between the cylinder holes and other just has the border
of metal around the cylinder holes.
Hmm, the
just bought an 81 camaro to fix up for my 16 yr old daughter. Need to ship
from Moline IL to Columbia SC.
Any info out there on United Road Delivery? Or any suggestions on a
reputable driver/service?
Thanks
Ed
In a message dated 7/21/2010 9:31:33 AM Central Daylight Time,
flesh...@aol.com writes:
just bought an 81 camaro to fix up for my 16 yr old daughter. Need to
ship from Moline IL to Columbia SC.
Any info out there on United Road Delivery? Or any suggestions on a
reputable driver/service?
I saved this and finally had a moment to look. Very nice indeed. Good work.
mike
--- On Mon, 5/10/10, Mitch Barrie mi...@mesatactical.com wrote:
From: Mitch Barrie mi...@mesatactical.com
Subject: Re: [Chevelle-list] Restoration photo essay
To: mi...@mesatactical.com, The Chevelle Mailing List
It means yer out of gas Just kidding:-D
- Original Message -
From: harkema...@aol.com
To: chevelle-list@chevelles.net
Sent: Thursday, July 15, 2010 4:11:28 PM
Subject: Re: [Chevelle-list] brakes/fuel gauge
In a message dated 7/13/2010 9:30:57 PM Central Daylight Time,
harkema
...@aol.com
To: chevelle-list@chevelles.net
Sent: Thursday, July 15, 2010 6:11 PM
Subject: Re: [Chevelle-list] brakes/fuel gauge
In a message dated 7/13/2010 9:30:57 PM Central Daylight Time,
harkema...@aol.com writes:
heck the ground to the dash for the gauge. Sounds like your
In a message dated 7/13/2010 9:30:57 PM Central Daylight Time,
harkema...@aol.com writes:
heck the ground to the dash for the gauge. Sounds like your booster has
failed, do you have a check valve in the booster? Run the car and pull the
valve out it should be under vacuum.
Jim
To: chevelle-list@chevelles.net
Subject: Re: [Chevelle-list] brakes/fuel gauge
In a message dated 7/13/2010 9:30:57 PM Central Daylight Time,
harkema...@aol.com writes:
heck the ground to the dash for the gauge. Sounds like your booster has
failed, do you have a check valve in the booster
Harlan,
You must have lost a ground while under the dash. Find it and you should solve
the gas gauge problem.
As for the brakes, where the booster and master cylinder both off the grand
prix? On the booster there is a shaft. They can be short or long. They don't
mix and match. A long shaft
Did you change to a disc type master cylinder a disc type
proportioning/distribution valve?
On Tue, Jul 13, 2010 at 7:27 AM, Dan Solomon dansolo...@msn.com wrote:
Harlan,
You must have lost a ground while under the dash. Find it and you should
solve the gas gauge problem.
As for the
ok i checked the inside rod at the pedal, and was going to try it in the
other hole, but i could not get it to move into the other hole because it was
hitting on things, i put the whole booster/rod ass'y from the gran prix into
the car.
i used the booster, spindles, porportioning valve from
rods. Your
problem would indicate you have the short rod in and need the long one.
Trooper
- Original Message -
From: harkema...@aol.com
To: chevelle-list@chevelles.net
Sent: Tuesday, July 13, 2010 2:53 PM
Subject: Re: [Chevelle-list] brakes/fuel gauge
ok i checked
Check the ground to the dash for the gauge. Sounds like your booster has
failed, do you have a check valve in the booster? Run the car and pull the
valve out it should be under vacuum.
Jim
From: chevelle-list-boun...@chevelles.net
[mailto:chevelle-list-boun...@chevelles.net] On Behalf Of
In a message dated 7/13/2010 6:43:15 PM Central Daylight Time,
jimthompso...@gmail.com writes:
heck the ground to the dash for the gauge. Sounds like your booster has
failed, do you have a check valve in the booster? Run the car and pull the
valve out it should be under vacuum.
FUSE10 is good for 20% thru Monday 7/5/10.
Roger Griggs homealone4...@yahoo.com wrote:
Does anyone have a current discount code for a supplier? I need a complete
interior package and would like to use it if I could. Anylne have any
problems with OPGI interiors? Seems like their
Year One code HEAT3 expires 7/1/10 for 20%.
Year One code S6110 expires 7/13/10 for 15%, extra 5% off for over $500 and
another 5% for over $1,000.
OPG code 0710 expires 8/15/10.
I don't know that either one of them warehouse anything, it always seems to go
on B/O then you wait.
301 - 400 of 41160 matches
Mail list logo
