"Bradley J. Wilson" wrote:
>
> Is there a Cisco webpage that lists all of this information?
> I've searched and come up dry.
It is inside every cisco router installation and configuration
guide.
Here is one of the links (watch the word wrap):
http://www.cisco.com/univercd/cc/td/doc/product/acc
Hello,
This is a brain teaser.
What would happen if you placed two OSPF routers on the same broadcast
network and configured only one with authentication ?
Stop !! do not try it on your lab before you think about it.
Winston.
_
FAQ, list archives, and subscri
thanks a million it's crystal clear
Jason
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Peter Van Oene
Sent: Tuesday, November 07, 2000 2:12 AM
To: [EMAIL PROTECTED]
Subject: Re: BGP next-hop-self
The key requirement here is to ensure that all IBGP r
I work for a CISCO distributor ,my customer want to buy a 2610 router ,and
ask for 64M
Dram .but 2610 gets 24M Dram as default ,and i looked up in the pricelist
,just found
MEM2600-32U64D (32- to 64-MB DRAM Factory Upgrade for the Cisco 2600
Series),how could i do?
I am a novice of this ,any help
replace 24M dram with two 32M drams(MEM2600-32U64D).
"Frank" <[EMAIL PROTECTED]> wrote in message
8v07ns$vjf$[EMAIL PROTECTED]">news:8v07ns$vjf$[EMAIL PROTECTED]...
> I work for a CISCO distributor ,my customer want to buy a 2610 router ,and
> ask for 64M
> Dram .but 2610 gets 24M Dram as defaul
the present question is :
I know the password's encrypted text is abcd1234,but how can I know the
clear text of the encrypted text "abcd1234"?that is to say, how can I know
the real password?could someone tell me?thanx a lot
_
FAQ, list archives, and subscription
SO you mean i just order MEM2600-32U64D,it's ok.that means "replace 24M dram
with two 32M drams",
i don't need to find such an item like MEM2600-24U64D.
is that right?
Thanks a lot .
frank
"fmxiao" <[EMAIL PROTECTED]> wrote in message
8v08h9$1m1$[EMAIL PROTECTED]">news:8v08h9$1m1$[EMAIL PROTECTE
What you need to do is this.
enter config mode.
type in no service password-encryption.
save what you just did and you should be able to see the en pass in clear
text.
W J.
>From: "cslx" <[EMAIL PROTECTED]>
>Reply-To: "cslx" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: a question ab
hello,
I want a reverse telnet session to a modem thru a 2501 router ,how can it be
possible...any configuration commandson async and aux ports..the modem
is external 56000bps voice/fax...i'll be thankful to you.
ALI SHEERAZ
_
I am getting ready to jump into a migration of out network from EIGRP to
OSPF. The procedure is simple enough. I am wondering if there are any
things that I might want to be careful of. We will still be
redistributing to and from a couple of EIGRP networks also. ANy advice
is welcome.
Thank y
Hi all,
I was wondering if somebody know (or have) where can I find the block
scheme of the Cisco router design making, from the first time the packet
enters the router to the time it get out of it.
Thank you in advance
Gil
_
FAQ, list archives, and subs
thanx,but now I don't know the enable password of this router,is there any
way except clear the password?
thanx
"W Jones" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What you need to do is this.
>
> enter config mode.
> type in no service password-encryption
Hello
Anybody brought any flash card's from this site, if so are they any
good?, how good in omparison to "boson"?. Thank you for your help.
http://www.franck.com
Regards
*
see http://www.alcrypto.co.uk/cisco/
Taco.
-Original Message-
From: cslx [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 9:58 AM
To: [EMAIL PROTECTED]
Subject: a question about "enable secret 5 abcd1234"
the present question is :
I know the password's encrypted text is abc
Take collisions divided by packets output. You are looking for the
percentage of
collisions related to the number of packets that were sent out of that
interface.
Roman
At 05:57 AM 11/16/00 +0100, you wrote:
Hi ,
How can I find out the collision rate of .1%
( comparing the collisions wi
I have encountered problem and the problem is due to the Kingston Memory compatible
issue. Your can either get a 64 Flash or try another two piece of memory.
Ben Hockenhull wrote:
> I upgraded a 3640 to 32 meg of flash using two Kingston KCS-F3600/16 16
> meg flash simms.
>
> Upon power up, I g
Title: RE: 2523 or 2522 for homelab
The different is the Fixed LAN port: Ethernet for 2522 and Token Ring for 2523.
Cisco 2522/CPA2522 1 Ethernet port with a selectable AUI connection or 1 Ethernet 10BaseT connection
1 ISDN BRI port (RJ-45)
2 high-speed synchronous serial ports
8 low-speed
You will need to do a password recovery.
You can always still keep the old password. While doing password recovery
you will able to see what the old enable password is.
Do a serach on password recovey on CCO.
If you don't find what you want, send a mail regarding what type of router
it is, and
When downloading new IOS versions, the Flash and RAM required is always
listed.
I cannot find any information regarding what version of Bootstrap is
required.
I take it this does need to be taken into account, or does it?
Anybody know where info is (2501 router)
Cheers,
Gareth
__
All,
I was talking to a Cisco SE Tuesday and he mentioned that the All-In-One
Cisco CCIE Lab Study Guide by Stephen Hutnik and Michael Satterlee was the
book to use. Apparently many internal Cisco people in RTP use this book for
preparation. I've ordered it, and am currently using the Doyle
Hi, all
I took and passed the CCIE written exam again yesterday. I found out last
week that I had to retake it in order to schedule my lab; the previous exam
I took "expired" due to the time elapse.
I did not study, so I can not recommend any reference materials, etc. I
will say that since I
Where on Cisco's site is the CCIE Power Session?
Thanks
Hunter
-Original Message-
From: Aaron K. Dixon [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 12:33 AM
To: Chuck Larrieu; Lance Hubbard; [EMAIL PROTECTED];
[EMAIL PROTECTED]
Subject: RE: Rumor Alert - Lab Changes - WA
Hi Guys,
I had problem to install the Cisco Documentation on W2k. The installation
seem to be successful, but when i launch the application , Maste Setup
appear an error
concerning the "search.exe" program.
How do i could resolve this problem?
Regards,
carmelo
Hi
I have the study material & notes for Routing & Remote exams. Do let me know
if you r interested
I am looking for Switching & Support exam study notes...maybe we can
exchange???
[EMAIL PROTECTED]
Regards
_
FAQ, list archives, and subscription info: http://w
Folks,
I
have being taken the BOSON test for the last two week and getting 100% score for
my BSCN test. Yesterday I made the decision of taken the CISCO online test and
what a disappoint I FAILED the test. My question is which test is the closest
one to the real test..What I am doi
Is Beta exam harder or have more questions?
What is the passing mark like?
GEM <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/beta_exams.h
tm
>
> 2000/11/27 - 2000/12/15 Good luck
>
> GEM
>
> _
All,
I'm just curious as to when and why you'd use IS-IS rather than OSPF or
EIGRP? I've never seen IS-IS in any business I've worked with or for in the
6 years I've been doing this. Do any other router manufacturers support it?
Is it eventually going to go away?
Thanks,
Chuck Church
CCN
sorry
folks, one of those days. Up to my ears in ISIS. anyhow,
Juan, do not feel despondent, take from the exam the areas in which you
are short in, get a book or other study method, study them for around a
week and sit the exam again. I bet you'll pass it
then.
Good
luck.
-
1st of
all it might be good of you to tell us WHICH test you are writing
about!
-Original Message-From: Juan Blanco
[mailto:[EMAIL PROTECTED]]Sent: 16 November 2000
13:41To: '[EMAIL PROTECTED]'Subject: Closest to the
real one...
Folks,
I have being taken the
Yeah !!That is exactly how I feel !!!
English is my second language. Now my tears is coming out, just you too
feel the same way. And most important, you write it out for me.
Thanks
>
> To give you an idea, pretending that this was a math exam, some of the
> questions looked like this:
>
>
Chuck, come on IS-IS is an "OPEN" standard. I am the total opposite to you
as to say I have no been without it in 2 companies that I have worked for.
As for when you should use it - to be honest I am hearing of more and more
businesses using it as people are starting to "think" that IS-IS is m
Has anyone used the Num-Exp command? If so, how many
Num-exp commands can a Cisco router handle?
We are deploying a huge VoFR network. The customer has a
private numbers scheme such as 745-2345 (2345 is the
extension),
Each location has 3 prefix numbers when they dial
internally. But to d
I just took (and passed)the CID (640-025) for my CCDP. That exam sucked
eggs as well. I just saw this morning that there is a beta for the NEW CID
exam. Good thing. The current one expects you to know not only outdated
material, but also the questions were horrible in my opinion. I have taken
Chuck, I think this is a good question. I always looked for comparisons
between IS-IS and OSPF and never really could find any good source (I mean,
Doyle describe both protocols very well, but that's not what I'm looking
for, I'm looking for large implementation descriptions, explaining
problems/b
Does anyone know where this web site went? It had some good study stuff on
it.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IS-IS is used by a large percentage of 1st tier internet backbone providers. From
what I understand, it was chosen not for technical superiority over OSPF, but becuase
cisco's IS-IS code was more stable at the time. At present, IS-IS maintains a couple
advantages over OSPF in the ISP world.
hello,
be aware of the navidad virus, delete ALL attachments
all cisco employees can update on cco
cheers
manuel
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROT
Do the
7206 router come with the 24 inch rack mount kit?? If not, how and were can I
find them?
Thanks!
Evan
You - CCNA
Yes the Hutnik book is a good one to incorporate. It covers quite a few
areas of routing, and many labs can be done with only four routers.
For voice stuff, at this point you may want to consider using Cisco Config
Maker, put together some simple voice connections, and study the resulting
IOS con
Robert,
If you take any test enough times you will end up knowing all the answers
of by heart,
so you will answer without even thinking about the question really. Thats a
real problem
with these type of tests. It suprising how quickly one can "learn" the
answers to 600 questions.
Having said a
ISBN # pleaseI want to look it up for myself...I think I have also heard
good things about this book.
Rick Watson
Network Engineer
OUSD(Comptroller)
703.697.5710
[EMAIL PROTECTED]
-Original Message-
From: Chuck Church [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 8:38
a 2610 router has two slots for drams, and the max memory for a slot is 32M.
so ur customer want 64M dram, the configuration for mem that i suggest is
the
only answer for the 2610...
"Frank" <[EMAIL PROTECTED]> wrote in message
8v0980$37o$[EMAIL PROTECTED]">news:8v0980$37o$[EMAIL PROTECTED]...
>
That sounds like an outstanding opportunity you have been blessed with! I am
also pursuing the CCIE Design. What do the people in your study group
recommend for study materials for the CCIE Design written and lab?
Bruce
[EMAIL PROTECTED]
""Constance Cate"" <[EMAIL PROTECTED]> wrote in message
8
Hi,
anyone like to recommend sample tests other then boson but they should be
worth buying :)
thanx
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BPG can load balance when it knows an AS over two links using the
maximum-paths Number_Of_Paths
command.
To control incoming traffic, use a filter-list in
regards
Geoffrey
- Original Message -
From: "Andy" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: W
Neal,
You are sailing right through the exams as I thought you would. The CIT was
one of the harder ones for me. Not due to the difficulty, but due to the way
the questions are worded. Some questions are extremely detail oriented
between one or two choices, and others are as obvious as the CCNA t
I know "enable secret" will encrypt the password automatically as compared
to "enable password". Apart from this, what is the difference between
"enable secret" and "enable password"?
Thanks.
PYF
_
FAQ, list archives, and subscription info: http://www.groupstudy
Carmelo,
I do got the same problem on my WIN98 (Chinese Version) How can we
resolve that
Rgds,
PYF
"carmelo Garofalo" <[EMAIL PROTECTED]> wrote in message
8v0olk$sg7$[EMAIL PROTECTED]">news:8v0olk$sg7$[EMAIL PROTECTED]...
> Hi Guys,
> I had problem to install the Cisco Documentation on
I used the Boson test #3 to practice for the BSCN and usually scored in the 80% range.
Yesterday I passed the BSCN with a score in the 900's. So if you are getting 100%
then I think you'll be ok on the test (you only need about 69% which is pretty sad if
you think about it).
>-Original
In the spirit of open debate, and just to be contrary, may I hold out an
alternative viewpoint.
We have all had our fun with test questions. Just recently we had an
analysis of an OSPF related question, a very interesting thread, and one
well worth checking out in the archives if you missed it.
I have Franks CID flash cards and they are great. I'm using them along with
the CID Exam Notes from Sybex and feel very good about the test.
André Paree-Huff
A+, ASE, CCDA, CCNP
MCSE+I, NET+, I-NET+
[EMAIL PROTECTED]
[EMAIL PROTECTED]
AOL AIM: pareehuff
- Original Message -
From: "Mark
Well put Chuck. I thank you for your professionalism and wisdom. It is
because of people like you that this list continues to flourish.
Thanks.
Carl
-Original Message-
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 9:36 AM
To: Carl Mirsky; [EMAIL PROT
Why don't you just learn the material instead of
memorzing a practice test?
"Juan Blanco" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Folks,
I have being taken the BOSON test for the last two week and getting 100% score
for my BSCN t
Congratulations Carl! My track is very similar to yours as I will be taking
the CID very soon and hope to tackle MCNS before year's end. I heard good
things about the Cisco Press DNS and so bought it, but I haven't cracked it
open as of yet. What did/will you get for this exam?
Rik
-Origi
Hello
Evan, I would use num-exp for other reasons, not to accomplish what you want to
do. You can do what you want on the dial-peer configuration. Here is an
example:
dial-peer voice 1 pots destination-pattern
745 port 1/0:0 prefix 212345
That's
what happends: when the route receive
Paper Cert, Paper Cert!
Patrick Bass wrote:
Why
don't you just learn the material instead of memorzing a practice test?
"Juan
Blanco" <[EMAIL PROTECTED]>
wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...Folks,
I have being taken the BOSON test for the last two week and getting 10
I recently passed the CIT exam to become a CCNP. It was a long process and by
far the most challenging certification I ever completed. I studied on average
2-6 hours a day for over 9 months and now have a lot of making up to do for
neglecting my family. It cost me a lot of money compared to my
As has been stated many times in this discussion
group, the Cisco On-Line tests are, for the most part, terrible. Even Priscilla
found them confusing, inaccurate, and in some cases just plain wrong! To prove
this point, I took one of them OPEN BOOK and still just barely passed it! They
are a
Guys,
Sorry for jumping into this.
I think I agree with Bob that IS-IS is more like something a service
provider should consider.
OSPF is sufficient for enterprise network, at least I think so, just imagine
a network with 3000 or more routers, how could we design a OSPF network
like this? how
Thanks Rik. I'm not sure I understand your question though. Could you
elaborate?
Thanks.
Carl Mirsky
CCNP, CCDP, MCSE, SCSA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rik Guyler
Sent: Thursday, November 16, 2000 10:11 AM
To: '[EMAIL PROTECTED]'
S
You need the CD dated after Aug 2000.
tristan
"PYF"
Sorry...I read my terribly worded question in your reply and I agree I
didn't ask it well!
My question was geared towards finding out what resource you will use for
the MCNS exam.
Rik
-Original Message-
From: Carl Mirsky
To: 'Rik Guyler'; [EMAIL PROTECTED]
Sent: 11/16/00 11:41 AM
Subjec
A metric is the criteria used to calculate the best
route to a destination. Each routing protocol uses different metrics (or a
different way of calcualting those metrics) to inject that route into the
routing table of the device. For example, RIP will use hop count as one of it's
metrics, wh
This is a point that I would like to make emphasis on. Here in Michigan, I
know many people who have the standard respected certs (A+/MCSE/CCNA) and
are averaging $55-65000 a year. Note that most of these people have these
certs and 5 or so years of experience. In California, the same jobs tend
Looking for a group of people who are preparing for
the CCIE lab and might want to get together to do
labs and/or allow each other to borrow the other's
equipment. I have access to (3) 2500 routers,
(2) 2600 routers and an occasional 2900 or
5000 series switch.
email me if you are interested.
-B
Juan,
Which exam are you trying to take?
Raul
- Original Message -
From:
Juan Blanco
To: '[EMAIL PROTECTED]'
Sent: Thursday, November 16, 2000 8:41
AM
Subject: Closest to the real one...
Folks,
I have being taken the BOSON test for the last tw
The reason there is a requirement in OSPF for an area zero is to avoid the
problems that all distance vector routing protocols suffer from. Both IS-IS
and OSPF route inter area traffic using distance vector "techniques".
For a fairly complete discussion on the merits of each check out Radia
Pe
Title: RE: Cisco documentation on Windows 2000
I am using a CD dated october 1999 on windows 2000. I did have some problems. My question is, are you installing the Verity CD web publisher using the default settings (it will install on the C: drive)
-Original Message-
From: carmelo
Are you sure you are not talking about the CID. :-)
-Original Message-
From: Cthulu, CCIE Candidate [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 8:39 AM
To: [EMAIL PROTECTED]
Subject: Passed the written... again
Hi, all
I took and passed the CCIE written exam again yest
Dear,
All
I have 3 question
here:
My cisco router
(10.48.1.x) some time need to manualy disable ethernet port ( T 1 port ) then
reenable again ( let say my T1 card need route to subnet 10.48.2.x subnet mask
255.255.255.0 . How can I disable port and then reenable port ???. When I
reena
Does anybody know what ports to block for WMP... radio and music?
Thanks,
Jeff
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PAPER CERT PAPER CERT until it's you taking the exam.
-Original Message-
From: Martin-Guy Richard [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 8:20 AM
To: [EMAIL PROTECTED]
Subject: Re: Closest to the real one...
Paper Cert, Paper Cert!
Patrick Bass wrote:
Why don't
At 09:38 AM 11/16/00, Spolidoro, Guilherme wrote:
>UUNet for example uses IS-IS on their core while the rest (or the majority)
>of the ISPs use OSPF. I wonder why UUNet chosed for IS-IS instead of OSPF.
>Maybe somebody on the list has an answer?
>
>Today I would chose OSPF over IS-IS because:
>
>
Could you compare (quality/style/etc) the questions were presented with - to
the sample questions at
http://www.cisco.com/warp/public/625/ccie/certifications/sample_routing.html
I'm assuming you tested for R&S, I hope I'm not wrong. (i'm new to this
list)
Brad Steinman
[EMAIL PROTECTED]
From
I use this test usually a week before the exams that I take. I have used the
Colt exams for the Switching exam and for the remote access exam. It is good
for finding out your weak areas. What I do is that I print out every
question and when I get the results I read the question that I got wrong an
It sounds like the market you are living in is oversaturated. Having similar
experiences while living in Des Moines, Iowa, my solution was to go where
the work is (in my case Kansas City)> It has been stated by numerous people
on this list previously and not to beat a dead horse...but, early in yo
Brad,
Yes, I tested for R&S .
My NDA friendly answer is that the good questions on the exam were as clear
as what you see in the sample. However, the test questions are much harder
than these simple "what is" questions given on the web page. Be prepared to
read quickly and analyze quicker.
Te
Well said, Chuck. Cisco doesn't want certified people who can just plug
routers together. They expect you to understand protocol behavior, not just
configuration. They expect analysis skills, not just memorization, since
that is what you will need in the "real world."
Some of the CID questions
At 12:40 PM 11/16/00, [EMAIL PROTECTED] wrote:
>Hi all,
>
>I was wondering if somebody know (or have) where can I find the block
>scheme of the Cisco router design making, from the first time the packet
>enters the router to the time it get out of it.
At Networkers a Cisco CCIE always does a
Hello all - On the PIX ...
What the 'heck' does the fixup command do? I ask this after reading the
guide and parsing CCO.
I need to set up https/ssl on specific ports (a client wants to allow users
to use https through the specific holes) and thought I had to "fixup" the
proto to listen to the
where would one find information on these cards??Thanks
-Original Message-
From: Andre' Paree-Huff [mailto:[EMAIL PROTECTED]]
Sent: 16 November 2000 10:27 AM
To: Mark Rose; [EMAIL PROTECTED]
Subject: Re: Flashcards by Franck
I have Franks CID flash cards and they are great. I'm using t
www.franck.com
André Paree-Huff
A+, ASE, CCDA, CCNP
MCSE+I, NET+, I-NET+
[EMAIL PROTECTED]
[EMAIL PROTECTED]
AOL AIM: pareehuff
- Original Message -
From: "Doneit, Dieter" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 16, 2000 1:53 PM
Subject: RE: Flashcards by F
overpriced and boson are better
tran - 179$
boson - 29.95$
Duck
- Original Message -
From: Lockwood, Bronia <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 15, 2000 12:40 PM
Subject: Transcenders
> Does anybody has Transcenders for CCNA? Are they worth the money?
>
Hi all,
Just took the above test. Don't sweat it, it's is a breeze. I used the Exam
Prep by Sean Odom and the Boson study test to prepare. Both were excellent
in helping me pass since that is all I used. The boson I found confusing
depending on which one I was using, I used both. Over all the B
fixup protocol
Change, enable, disable, or list a PIX Firewall application protocol
feature. (Configuration mode.)
fixup protocol ftp [port]
fixup protocol http [port[-port]
fixup protocol h323 [port[-port]]
fixup protocol rsh [514]
fixup protocol smtp [port[-port]]
fixup protocol sqlnet [port[-p
Damn!?!?!? Are you kidding? I didn't want to have to really learn this
stuff.
;-)
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 10:43 AM
To: [EMAIL PROTECTED]
Subject: RE: Passed the written... again
Well said, Chuck. Cisc
Title: RE: Windows Media Player
Jeff,
It is TCP port 1755.
Refer to this URL for more information: http://www.microsoft.com/Windows/windowsmedia/en/serve/firewall.asp
Han Nguyen.
-Original Message-
From: Jeff Duchin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 1:1
Transcenders are a little high priced, but I've always found them to be very
complete. I've never used the Boson tests. What makes them better? More
questions? More detailed? Please be exact as I'm going to make my practice
test purchase soon.
Denis
>> overpriced and boson are better
>> tran
Not sure. Possibly the Cisco press book, unless someone else has any
ideas
Carl Mirsky
CCNP, CCDP, MCSE, SCSA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rik Guyler
Sent: Thursday, November 16, 2000 11:01 AM
To: '[EMAIL PROTECTED]'
Subject: RE:
I understand that as, more tries then more pass mark, which is because
if you take the exam more than once, you can face the questions you had
solved before again.
Also I heard that Cisco adjusts difficulties of the exams whenever
they update the questions...
Cheers,
Abraham
-Original Mess
In answer to Riks' question, I used the SYBEX and TOP DOWN. Although Top
Down is not specifically for the CID, it is excellent for anyone going into
design, and even Internetworking itself. The Sybex is directly geared for
the exam, and again is excellent, because the authors point out what is re
Well, I believe that Cisco's take on this is that OSPF does not scale as
well for very large networks as does IS-IS. At least so sayeth an
instructor SE that I happen to know.
Rik
-Original Message-
From: Priscilla Oppenheimer
To: [EMAIL PROTECTED]
Sent: 11/16/00 1:20 PM
Subject: RE: I
The problem with this has been discussed many, many times in this forum.
Please check the archives for more details.
The issue as I know it centers around the Verity product bundled with the
CD. According to Verity's site (a couple of months ago), their web
publisher product does not support Win
Do they make a CCNAv2 now? When I bought mine it was a v1 and little help to
the new v2 format
-Original Message-
From: Denis A. Baldwin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 2:41 PM
To: 'Donald B Johnson Jr'
Cc: [EMAIL PROTECTED]
Subject: RE: Transcenders
Transce
What you are seeing is an MD5 hash of the clear text password. Unlike the
type "7" password there is no "easy" way to get the clear text password from
the hash. I believe (I may be wrong) that an MD5 hash can be brute forced
but it takes LOTS of processing power and time.
Regards,
Nathan
-
Right out of wmp help file:
Use ports
Specify a particular port, which is useful if your network or firewall
administrator has established a specific port that enables streaming media
to pass. Unless otherwise instructed, Windows Media streams attempt to pass
through firewalls on port 1755.
Ti
Is this the correct thread for CCIE Lab preparation?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Enable secret has a much stronger encryption.
The enable password has a 2-way encryption, meening you can get the
clear-text password back from the encrypted one. This is (allmost)
impossible with the enable secret option.
Bottom line: don't use the enable password, use enable secret. The enable
> On Cisco 1900 series there are two uplinks port with port
speed 100 M. Is that possible if we want to configure the
uplink ports to make them as fastether channel ???
> Say the cisco 1900 series uplink connected to Cisco catalyst
5000 series<
The command to do this can be found here (watch
Should Verity CD Web be installed?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2000 12:52 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: Cisco documentation on Windows 2000
I am using a CD dated october 1999 on windows 20
1 - 100 of 164 matches
Mail list logo