Hello,
I have got Cisco 803 ISDN router. On which WAN port is configured with
static IP address but from now on my ISP will not be providing me static IP
on connection, instead they wud assign IP address dynamically using DHCP
server et their end.
Can some one guide me how do change the setting
Has anyone taken the new CCIE RS exam?
If so, can you share your thoughts on the difficulty and scope?
Im currently studying for it and since it so new, any feedback would great.
Raj
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51130t=51130
The Cisco logging facility on a router uses a random high port as the
source for the syslog packets. I assume the PIX is the same since you're
having trouble. The FreeBSD syslogd expects the packets to be sourced
from port 514. You can try the flag that supposedly allows syslogd to
take random
I think I understand it better (that's usually the point where someone pulls
the rug from under my feet :-))
The two seem to contradict each other though. One saying that the Tc can be
set by the provider, and Cisco saying it's automatically calculated.
They both seem to make sense. The Cisco
Helo!
To Neal Rauhauser : If you don't specify source port, the PIX (OS 6.x) will
send syslog messages from UDP port 514!! You can change this to whatever
from range 1025-65535 : for example: logging host inside 192.168.11.4 udp/1025
So I think this is not a problem, if the FreeBSD syslogd
1. Contact Cisco TAC for assistance.
2. Don't e-mail me directly, contact me through GroupStudy.com - Please.
3. Take the full line of the error from your buffer log/console log or
debug output to a syslog server, and plug it in to the error decoder on
CCO or Google.com.
If that doesn't work,
Use extendable to map duplicate inside addresses to different outside
addresses, i.e.
ip nat inside source static tcp 192.168.1.1 8080 99.99.99.2 8080 extendable
ip nat inside source static tcp 192.168.1.1 80 1.2.3.4 80 extendable
ip nat inside source static tcp 192.168.1.1 8080 1.2.3.4 8080
All,
I am trying to configure a T1 accross these 2 routers and interface types.
One is a multichannel T1 on a 7206 and the other is a serial 0 Hardware is
HD64570 on a 2524 router. Does anyone know if these two interface types are
compatable to configure a T1 accross. I set all my framing, clock
Recently someone post the exact link for 2002 CCIE Power Session. Kindly
someone send it again. Thanks
Shahid
Frank Merrill wrote: Sandra Carr wrote:
Does anyone have a copy of the slides used at the 2002 CCIE
power sessions at Networkers? If so, is there a link to it?
If not, can I get
here it is once again.
http://www.cisco.com/networkers/nw02/presos/pws/docs/PS-570.pdf
another reason why one should save ALL of my posts. :-
Chuck
Shahid Muhammad Shafi wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Recently someone post the exact link for 2002 CCIE Power
Hi Everyone,
Hope i am not violating any law for posting this question.
I would like to know whether with the new format to the Switching exam, will
there be more emphasis on the configuration commands (CLI or IOS)???
I heard the old version (504) has little emphasis on the commands and
Dear All
I plan to sit for Awitching and Remot Access test in near soon
Would you tell me PASSING score of both and any usefull hints
I have read Cisco press books, 2 years experiance and take boson 4.5 is it
enough ?
Regards
Joupin
Message Posted at:
This is not intended to offend anyone: Just thought professionals could be
just that and wanted an objective answer if you had used a Dell managed
switch. Thank you.
At 01:07 AM 8/9/2002 +, Chuck wrote:
The Dell switch product line is the spawn of the underworld. Using Dell
switches
Hi,
Any knows where to locate IOS Firewall IDS Document (Configuration Guide)?
I search on CISCO and cannot find it. Only 12.1 version exist.
TIA,
Fanglo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51143t=51143
--
FAQ, list
Does anyone know what the price is for ordering the 3DES software for
the pix 501.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51144t=51144
--
FAQ, list archives, and subscription info:
Dear Group,
Need your help in setting up this :-
I have a router make huawei 1600 model. On my serial port i am connecting
GPRS mobile phone and dialing to my ISP for internet connectivity. I am
facing some problem in connecting. I get the ip from the isp after the
dialin but i am not able to
Awitching = Switching ;)
Joupin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Dear All
I plan to sit for Awitching and Remot Access test in near soon
Would you tell me PASSING score of both and any usefull hints
I have read Cisco press books, 2 years experiance and
this is not intended to offend anyone, but sometimes people on newsgroups
make feeble attempts at humor. just thought adults could be just that, and
might laugh if they thought it funny, and ignore it if they thought
otherwise.
- Original Message -
From: John Chang
To: Chuck ;
Sent:
Pls ignore my previous mail, I finally got it.
Thanks,
Fanglo
On Sat, 10 Aug 2002, Fanglo MA wrote:
Hi,
Any knows where to locate IOS Firewall IDS Document (Configuration Guide)?
I search on CISCO and cannot find it. Only 12.1 version exist.
TIA,
Fanglo
Message Posted at:
I took a bit of a risk, and purchased some GBIC;s off That Auction Site. Of
the four, three are Cisco branded, and the fourth is labeled Agilent (
used to be HP )
I had done a bit of investigation prior to purchase. I see that the Auction
Site has listings for Agilent, IBM, and Extreme GBIC's,
I am on the trail of the last test for CSS1 Cert - The IDS test.
From what I gather on their website; Cisco is phasing out CSIDS and
replacing it with IDSPM. There are no books titled IDSPM.
So I have 2 questions:
A) is the CSIDS book a valid study guide for IDSPM?
B) If they are
I have to concur with my colleague Mr. Brunner#8217;s 8/8 post and add this:
If Cisco would lower their Cost they wouldn#8217;t be shooting themselves
in the foot. Yeah, Yeah I know Cisco quality and support#8230; Ok they
are still the king of the hill and FOR THE MOST PART you get what you pay
I think it was humo(u)r John. I'm an eternal infant and appreciate the poor
humo(u)r as much as the serious replies.
Have a beer Have a 'Chuck'le.:-)
Sorry, not seen much of Dell switches, but no doubt if you get enough
sarcastic infantile replies it will keep the thread alive to be read by
Art,
Thanks for the clarification! Can this keyword also be used to map
multiple inside LOCAL addresses to a single inside GLOBAL address on
different ports? Example follows...
ip nat inside source static tcp 192.168.1.1 8080 99.99.99.2 8080 extendable
ip nat inside source static tcp
Is it really the source port?
Normally the destination port is UDP 514.
Does it care what the source port is?
Gaz
HORVATH TAMAS wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Helo!
To Neal Rauhauser : If you don't specify source port, the PIX (OS 6.x)
will
send syslog
I have been arguing with myself quite a bit lately on which IGP would be
better to use on a large internetwork, and found a lot of differing opinions
on which of these 2 protocols to use. Dave Katz did an excellent
presentation on the subject at the 1999 Albuquerque NANOG, I figured I would
I apparently forgot my chill pill this morning. :) Thanks.
At 10:04 AM 8/10/2002 -0700, Chuck Larrieu wrote:
this is not intended to offend anyone, but sometimes people on newsgroups
make feeble attempts at humor. just thought adults could be just that, and
might laugh if they thought it funny,
hrmmm... the channel part # is PIX-501-VPN-3DES
I'd suggest scouring the net for the cheapest price, CDW has it for $78.02
Enjoy the weekend all ;)
-zeke
On Sat, 10 Aug 2002, Elijah Savage III wrote:
Does anyone know what the price is for ordering the 3DES software for
the pix 501.
I got my CSS1 back in May, I chose to take IDSPM.
I used the Cisco Press book CSIDS, and an eval copy of Cisco Secure Policy
Manager. I honestly do not know how much longer the CSIDS exam will
be available, I'd suggest filling out an online customer service request
form and asking Cisco:
Hi all,
I've worked with several of the Dell PowerConnect switches, a few of my
customers chose to purchase them because of the attractive price, after
all it is an access switch (the 2124's) I don't have much to say other
than that I havn't run into any issues, they have a slick web interface
Hey guys,
Well, I've been tinkering with the network again, and in search
of performance increases I have come across something a little weird.
Let me run it by you all and see if anyone can play spot the mistake
for me. We have nine separate in house networks in our facility, each
with
Hi all,
I am in need of some help from you guru's with reverse telnet using a 2509.
I haven't had to use it yet and I'm trying to get it working on my home lab.
I set up a 2501_A to reverse telnet into a 2509 and from there I want to go
into another 2501_B. I have set up the following:
on
I'm using 12.0.18S5, but a lot of my lab gear is
refurbished higher end gear. 12.0S or T might be good
for you if you have 7200+ gear.
On the lab series gear, I've been using 12.1.10
with no problems.
Re: 12.2* - I try and stay away from new IOS =]
ymmv,
-mark
-Original Message-
can the cisco DOC Cd can be download or is thete a way to get the CD?
How frequently it gets updated.
I don't want to connect to the internet to go through the content.
I can read this if I am travelling.Is there a technical Documentation CD
also for all the Cisco products.
I appreciate if
[EMAIL PROTECTED] wrote:
can the cisco DOC Cd can be download or is thete a way to get the CD?
Yes, you can buy one (don't know what it costs, offhand). Or you can
just buy any Cisco product; it'll have a copy of it delivered with it.
How frequently it gets updated.
Every month.
I can
I hope it's not like comparing regular and decaf :-
Thank you for the link.
(NO!! When will this info overload end!!)
Elmer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Lupi, Guy
Sent: Saturday, August 10, 2002 2:02 PM
To: [EMAIL PROTECTED]
Subject:
- Original Message -
From: Priscilla Oppenheimer
To:
Sent: 09 August 2002 5:57 pm
Subject: Re: Notes on salaries [7:51052]
The key, we have found, is to be selective in the students you
allow into
the program.
Sure you can be selective in the students allowed into the program.
This is the network:
AS101(R1) --- AS102 (R2) --- AS103 (R3)--- (R4)-AS100(R0) to AS101
(R1)
(R3 and R4 are IBGP neighbors)
I have route 172.16.0.0 on AS101 (R1) that is advertised via BGP.
When i do a show ip bgp, the only routers that have two paths to
172.16.0.0 are R3 and R4. R0
Team,
I have the following items available, Make me an offer that I can not
refuse.
2 WIC-1B-U
1 WIC-1DSU-T1
1 FE-TX (10/100 Ethernet)
Thanks,
Juan Blanco
The greatest glory in living lies not in never falling,
but
I got one for free, as I have CCO login. This CD worked only temporarily and
now it says License expired. I never told the license is temporary while
installing. Has any one experienced this?.
Thanks
NBS;M.C. van den Bovenkamp wrote: [EMAIL PROTECTED] wrote:
can the cisco DOC Cd can be
Hi,
Anybody know any traffic geneartor which is available for testing the snmp
traffic.
I am having a lab configuration with cisco 7500 router and the network
management people are syaing that there are lot of SNMP timeouts.
I want to pump in lot of UDP packets on to the network and see
You should try telenetting 172.1.1.1 2001.
Thanks
John McCartney wrote:Hi all,
I am in need of some help from you guru's with reverse telnet using a 2509.
I haven't had to use it yet and I'm trying to get it working on my home lab.
I set up a 2501_A to reverse telnet into a 2509 and from
Gaz wrote:
I think I understand it better (that's usually the point where
someone pulls
the rug from under my feet :-))
The two seem to contradict each other though. One saying that
the Tc can be
set by the provider, and Cisco saying it's automatically
calculated.
Yes, Spohn does say
You say that the stations connected to the 2948G-L3 stop transmitting for 15
seconds. Could the Spanning Tree be reconverging for some reason? Since
you're doing IRB with both bridging and routing, presumably STP is running
and 15 seconds sticks out as the Forward Delay timer used by STP. It's
depends on what is meant by technical documentation
the doc CD contains a lot of information, both hardware and software, for
all the product lines.
as an example, check out this link
http://www.cisco.com/univercd/cc/td/doc/product/core/7200vx/index.htm
the doc cd contains al this as well as
funny you should mention it - but mine just started acting up last week, and
I have March 2002!!!
the workaround is that when you get this link:
http://127.0.0.1:8080/expired.htm
you change the /expired.htm file to /home.htm and it works just fine.
HTH
Cisco Study wrote in message
[EMAIL
Hi Mark,
If you don't mind can you please send me a copy of the same.
Regards,
Fathalla
Email: [EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Turpin, Mark
Sent: Wednesday, August 07, 2002 9:43 PM
To: [EMAIL PROTECTED]
Subject: RE: BSCI
47 matches
Mail list logo