Was the 2500 working fine then just started doing
this, or is this 2500 new to you and first time using
it?
Turn off the router, use a electrostatic strap, and
take the cover off and try reseating the memory and
flash and make sure all chips are seated well on the
mainboard. Power on and see if
But imagine how cool it would be to be the 'FIRST' CCIE in the world. It's
like being the first man on the moon!
There's only one person who could say that.
Of course, the subjective question would be to see who is the 'BEST' in the
world!
Message Posted at:
http://www.groupstudy.com/form/re
For any speed i find intefaces flapping
Best Regards,
Mohamed Saro
Network Division Manager
T.E. DATA
Tel: +20-10 -1663531
Tel: +20- 2 -7494025
Ext:1102
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Stephane LITKOWSKI
Sent: Tuesday, August 27,
Now why did the list server remove the 700-799 and 1100-1199 that I put in
my original email?
Forgive me, I am going to test something
Testing 700-799
Testing
Testing
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 27 August 2002 16:36
To: [EMAIL PROTECTED
I wonder how a simulation question is graded?
For example, if a question for a CCNA level exam states, that you must
configure an ethernet interface, how is the answer graded. What if you do
configure the interface properly, ie. ip address 172.5.5.1 255.255.255.0 but
you forget to enter the no sh
Hello Tunji,
First, I want to introduce my self. My name is Edwin from Indonesia. I work
for a new company that just setup the network.
I'm glad that i can get help from you. I sent an attchment of sh run and sh
ip wccp.
When i debug ip wccp, I already get the message like you told me. So I th
0 = must match
F = ignore
reason why its F?, the mask is based on hex :D
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52194&t=52128
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Repo
can someone help me how I can fix this.
=
System Bootstrap, Version 4.14(9.1), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 16384 Kbytes of main memory
Unknown or ambiguous service arg - udp-small-servers
Illegal IP keyword
I was able to put the finishing touches on the lab exercise I have been
writing for That Study Place. I had a momentary scare, because my final
topic was a particular construction that has the look, feel, and taste of a
CCIE
Lab topic, so I thought it important to cover it in my own work.
( Note
Dear ALL,
how i can make ISDN BRI to connect at 128kbps instead of 64kbps as a bundle
channel of Cisco router 3600 using ppp encapsulation.
Kind Regards
abd quqas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52190&t=52190
-
Hi all,
I am new to VPNs and have a situation for your suggestion(s).
4 host PCs are to be connected into a Cisco 827H router through the 4-port
Ethernet interface. There is a remote site where there is 1 host (that has a
DSL card in the host) which requires connectivity through a VPN to the 827
As far as I know, certain commands can be used to test your configurations.
For example, you always want to do a "no shut" after configuring an
interface. Then you can check the configuration with a "show interface"
command and you should see an up/up status if your configuration is correct.
Shaw
My apologies in advance if anyone if offended by my mail.
For a long story made very short, I'm moving soon and I don't think there is
any way I'll be able to keep my entire home lab in the small apartment I'm
moving to. As such I've currently got a workhorse Cisco 7000 router with
plenty of int
Hi,
Is there a way to set the term hist size command permanently on the router?
I mean this setting is not saved even though you do a wr on the router. I
wonder why that is??
Any ideas?
Thank you.
_
MSN Photos is the easiest way
Interesting articles
http://certcities.com/editorial/news/story.asp?EditorialsID=336
8/27/2002 -- Oregon resident Robert R. Keppel, owner of the now-defunct
braindump Web sites Cheet-Sheets.com and CheetSheets.com, pleaded
guilty in federal court Friday to a charge of theft of trade secret
I see lots of people selling on-line lab access at That Auction Site ( you
know the one I mean )
You may also rent a rack at the following places:
www.ccbootcamp.com
www.fatkid.com
www.ipexpert.net
www.gettlabs.com
HTH
z
""Rasman"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECT
I am in need of providers of online CCIE Labs.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52185&t=52185
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
On Tue, 27 Aug 2002, Charles D Hammonds wrote:
|->Yes.
|->
|->From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
|->Keith Woodworth
|->Sent: Tuesday, August 27, 2002 4:43 PM
|->
|->Used the above, when looking at the interface stats on the 7206 is the
|->input rate the data coming int
I was just browsing the CCIE Lab list to see what was up.
Couple of things -
1) the archive needs to be updated. The most recent post was early July
2) it was interesting to see the early comments on the 3550 switch.
Having done a bit of reading and a bit of practicing, and having been
through
Yes.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Keith Woodworth
Sent: Tuesday, August 27, 2002 4:43 PM
To: [EMAIL PROTECTED]
Subject: Interface In/Out stats [7:52177]
Small very simple question but need clarification w/regards to MRTG stuff.
Have
I am also a chinese,I suggest a better forum of chinese,
http://forums.ultratechnology.net/forumdisplay.php?s=&forumid=17,a very good
forum,enjoy it.my qicq is 26637380.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52180&t=52060
---
shop around,. ask advice. caveat emptor.
BTW - all you folks who sell equipment - please respond directly, and do not
post to the list.
thanks.
""scott chapin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello all - I need to purchase an ISDN simulator and I came across t
Hello all - I need to purchase an ISDN simulator and I came across this link.
http://www.vconsole.net/simulator_isdn.html
Should I take my chances with this cheaper product ($800.00) or should I
stay with more expensive products such as:
B Link2 ISDN Simulator $999.99
http://www.CheapISDN.com
Small very simple question but need clarification w/regards to MRTG stuff.
Have a 7206 connected to a 7202 via xover ethernet.
Used the above, when looking at the interface stats on the 7206 is the
input rate the data coming into the interface from the 7202? And the
output rate the data coming o
even Cisco seems to concede that the CCIE is a permanent award - kinda like
judges remain "your honor" and congress slime remain "Senator" or
"Congressperson" even if they were run out of office as criminals.
The verification tool does note the inactive status.
CCIE Verification Tool
Yes, Jeffre
be careful what you wish for, Brad - you might just get it ;->
--
""Brad Ellis"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> they need to keep the number for CCIE's less than 10,000. they should so
a
> "squeeze" and change everyone's #. then, when it start to get close
they need to keep the number for CCIE's less than 10,000. they should so a
"squeeze" and change everyone's #. then, when it start to get closer to
10,000 again, we have a contest like American Idol, call it Worldwide IEdol
instead. have them program routers and solve technical problems in front
so if a CCIE loses his/her active status, does that give him/her the right
to continue to post their CCIE # in their sig and tell everyone they are a
CCIE? I believe if they lose active status, they are NOT a CCIE anymore
(sort of like a doctor losing their credentials). what do you guys think?
Possibly someone is looking to test before the lab changes come Nov.
I'm looking to swap my R/S Oct 16th date in SJ for anytime in the month of
Dec
in SJ.
Please contact me directly.
Thanks in advance,
Eric [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/
with the advent of the CCIE verification tool on CCO, it is now possible to
check out these rumors and bits of misinformation that have crept into the
lexicon.
http://tools.cisco.com/CCIE/Schedule_Lab/CCIEOnline?verify
( requires CCO login )
You do need to know the real first name and correct sp
Hi,
Do the simulations in the new CCNP exams works, so that I can test my
configurations or I can just enter the commands?
Eng. Paulo Roque
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52172&t=52172
--
FAQ
Paul, as a survivor of the brokerage industry, where something similar
happened about four years ago, I have to offer this gentle correction.
it is C10K, not C1K
The Dow was approaching 10,000 for the first time in history and there was a
tempest in a teapot about Dow10K system compatibility.
W
Well, the online verification system says that "Stuart Biggs" is CCIE 1025,
though the current status is Inactive.
-Original Message-
From: Chuck Ryan [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 27, 2002 5:22 PM
To: [EMAIL PROTECTED]
Subject: Re: No longer 4 digits [7:52146] 2nd Terr
Hmmm, sounds like I need to do some more programming to fix it.
Sorry for the bug!
Paul
- Original Message -
From: "Mark W. Odette II"
To:
Sent: Tuesday, August 27, 2002 5:05 PM
Subject: RE: PSTN Router to Router ... [7:52132]
> Bill- if you're pasting url's as the first line of tex
Its been a long time coming folks. In the grand scheme of things, I'd say
that the 5 digit is right about on time considering that other elite
industry certs that have been around for approximately the same amount of
time are either or already there or way past that. I don't think that it
will h
Actually, I thought/read/heard that CCIE #1025 (aka the first CCIE) was/is
Jeff Buddemeier, technical lead for Cisco.
This is the first time I ever heard the name Stewart Biggs mentioned as CCIE
#1025.
- Original Message -
From: "Daniel Cotts"
To:
Sent: Tuesday, August 27, 2002 4:01 PM
This is it! The thing that will turn the industry around. Let's start
asking people if their network is C1k compatable. Explain how most networks
were designed for four digit CCIE's and they will need to hire us for a
complete overhall of the network.
Yea sure it will cost a lot, but look at t
Rich is right. When the router boots up in boot mode, type enable, config t,
then in global config, type config-register 0x2142 or 0x2102. Reload the
router and you should be ok.
Larkin, Richard wrote:
>
> We had the same problem last month on an old 4000.
> The solution, from memory, was to use
Bill- if you're pasting url's as the first line of text in the body of
the message, the news/mail server for this list strips it off...
This is the reason why you see some users post messages with something
like the following:
Pad pad pad pad... and more padding...
that's all folks...
etc.
according to the Cisco Verification tool:
CCIE Verification Tool
Yes, Stuart Biggs is CCIE number 1025. However, certification is NOT
currently active. (Current status is Inactive).
Chuck
z
""Daniel Cotts"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In my previous post I
Try lowering the clockrate, to something like 64000, (I never had a problem
at speed). Also make sure you are applying it to the correct router. You
might also want to try replacing the cable with a known good one. As they
say: 70% of the problems lie in the physical layer... Or was it 75%? :o)
In my previous post I quoted a post from Terry Slattery regarding the first
CCIEs. In it he did not recall the name of CCIE# 1025. In the quoted post
below he does provide a name.
snip
The first CCIE, #1025, is/was Stewart Biggs. My understanding is that his
certification has lapsed and he's of
The following is cut from a post to the list by Terry Slattery. It was in
answer to a similar question. In it he does not identify CCIE# 1025. I seem
to remember another post where he does provide a name for #1025. I'll
continue searching for it.
snip
The folks here at Chesapeake forwarded the fol
I am looking for some info on this command.I checked Cisco but did not find
much.Anyone with a link ?
session-disconnect-warning
Thanks
_
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support
CCIE 1040 sits next to me and I asked him if Imran (sp?) was his
proctor and it was. Imran designed the orgianal program and it's our
guess he was the proctor for the 1st CCIE.
Imran was pretty tough, I remember talking to him at networkers in
Denver when the CCIE recert first came out and abo
Don't you mean there will be 1 people who have passed the test?
At 05:34 PM 8/27/2002 +, Jim Brown wrote:
>First number assigned to a candidate was 1025. When we hit 11025 their will
>be 10,000 candidates not including people who didn't recertify.
>
>-Original Message-
>From: Reza
Actually no, not all the #'s are active still (people who let their
certification expire) and they didn't start at 1...they started at 1024.
So I have a paradox to think about, a CCIE proctors the lab, so who
proctored for the first CCIE? Kinda like what came first: the CCIE or
the proctor.
Dan
Yes someone who reads this list (congrats again if you read this Ray)
just passed and got a number in the mid 10030's
Dan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Ken Diliberto
Sent: Tuesday, August 27, 2002 11:04 AM
To: [EMAIL PROTECTED]
Subject
this topic of fascination for many often leads to a bit of confusion as well
http://www.cisco.com/warp/public/625/ccie/ccie_program/ccie_present.html
shows the number of CCIE's world wide as of 7/31/02
The first CCIE number issued was 1025. Over the years, some have retired,
some have neglecte
NOT including non-recert's? That would mean Cisco recycles the numbers?
Bill Creighton CCNP
Senior System Engineer
Motorola
iDEN CNRC Packet Data
-Original Message-
From: Jim Brown [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 27, 2002 12:34 PM
To: [EMAIL PROTECTED]
Subject: RE: No
My experience is with Cisco Cache Engines running version 1 and 2 wccp.
I have never implemented a cache on squid (that should be wccp running on a
unix box, right?), so I really cant help much there. But if ur router is
properly configured, below is the wccp config u should have:
ip wccp versi
First number assigned to a candidate was 1025. When we hit 11025 their will
be 10,000 candidates not including people who didn't recertify.
-Original Message-
From: Reza Sharifi [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 27, 2002 11:20 AM
To: [EMAIL PROTECTED]
Subject: RE: No longe
Is that because there are more than 1 CCIE,s?.
Reza
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52147&t=52146
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and No
I just heard from a friend who just passed the lab. Cisco is in the 5
digits now for CCIE numbers.
Ken
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52146&t=52146
--
FAQ, list archives, and subscription info: http://www.group
Found question 2 answer in the RFC 1587 :
"If the destination is the default route (destination =
DefaultDestination) and if the originator of the LSA and
the calculating router are both NSSA area border routers
do nothing with this LSA and consider the next in the list
Your router expects wccp version 2 on ur web-cache by default. Ur web-cache
is sending wccp version 1 messages, hence ur debug output. U have to do ip
wccp version 1 in global config mode on the router to enable support for
wccp version 1. If u dont get the version option on doing ip wccp ?, t
>While security policies need to be unique per organization, there are some
>common elements that can be recycled.
>
>Just to give an example, how about the handling of passwords? Really, do
>you need to re-create the piece of the policy that says passwords need to be
>protected, must be of a cer
Is there a way to have two 2501s directly connected on a serial interface
using frame relay with multiple PVCs, but have all those PVCs route to an
ethernet interface on one of the routers?
I know it sounds like an awkward way of doing things, but I'm trying to set
up the following scenario
Eth
Hi,
=20
I would like to create virtual dialer downloaded only for the active =
connection.
After the connection the router erase this virtual dialer.
=20
how to get av-pair by radius to router and what's command must i've to =
get it from radius.
=20
I want some attribut download by radius like
What the hell is going on?
- sorry for some reason URL's are being omitted from my messages...
Configuring AUX-to-AUX Port Async Backup with Dialer Watch
http://www.cisco.com/warp/public/471/aux-aux-watch.html
Bill Creighton CCNP
Senior System Engineer
Motorola
iDEN CNRC Packet Data
-Orig
For some reason the URL I included didn't show up... Kiwi has a great syslog
viewer as well as many other products for logging - kiwisyslog.com
http://www.kiwisyslog.com/products.htm#logfile_viewer
Bill Creighton CCNP
Senior System Engineer
Motorola
iDEN CNRC Packet Data
-Original Message
More specifically:
OWA pages can be accessed through SSL channel (40-bit key, according to the
USA export laws for non-financial institutions). Communication between OWA
server and servers located in the intranet zone is restricted to:
one BDC server
TCP : 135,138
UDP : 137
Exchange servers
We set up exactly what you're trying to do for a client in Chile for a
Mobile Office product we deployed, use the blueprint below for starters.
(watch out for word wrap)
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechn
ol/exchange/exchange55/plan/ekmgem.asp
Bill Crei
Configuring AUX-to-AUX Port Async Backup with Dialer Watch
Bill Creighton CCNP
Senior System Engineer
Motorola
iDEN CNRC Packet Data
-Original Message-
From: Paul [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 27, 2002 9:24 AM
To: [EMAIL PROTECTED]
Subject: PSTN Router to Router ...
Bill Creighton CCNP
Senior System Engineer
Motorola
iDEN CNRC Packet Data
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 26, 2002 6:01 PM
To: [EMAIL PROTECTED]
Subject: Pix Firewall Logs [7:52099]
I have my pix logging to a syslog server ca
While security policies need to be unique per organization, there are some
common elements that can be recycled.
Just to give an example, how about the handling of passwords? Really, do
you need to re-create the piece of the policy that says passwords need to be
protected, must be of a certain l
Access-list numbers defines a standard access-list based on a MAC
addresses
Access-List number defines extended access-lists based on MAC
address's
So it would be for example
access-list 702 permit ed32.2342.e0df ..
Where
Ed32.2342.e0df (I just made it up) is the MAC address
Hello all ...
I need to provide a tertiary backup for a remote site !!! I was thinking of
using PSTN Can this be done ??? I guess I would have to buy FXO cards
for
both routers ... or can you utilise the AUX ports ???
Any comments will be greatly received ..
Regards
Paul ...
Message P
What speed did you configure ?
""Mohamed Saro"" a icrit dans le message de news:
[EMAIL PROTECTED]
> that was configured but the interfaces flaps up and down
>
>
>
>
> Best Regards,
> Mohamed Saro
> Network Division Manager
> T.E. DATA
> Tel: +20-10 -1663531
> Tel: +20- 2 -7494025
> Ext:1102
If I remember correctly,
look at CCO for examples of using Access-List 700-799.
Good Luck,
Mark
-Original Message-
From: Eng. ABDALLAH QUQAS [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 27, 2002 7:51 AM
To: [EMAIL PROTECTED]
Subject: Ref: ACCESS-LIST [7:52128]
Dear All,
anybody ca
I would probably look at 12.1.16. It is GD and should be stable. IP Plus
IPSec 3DES only requires 8 and 40 so you should be fine. If you are feeling
brave you could load up 12.2.10b.. :)
Tim
CCIE 9015, CSS1
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dear All,
anybody can tell how we can apply an access-list base on MAC Address INSTEAD
of ip address on Cisco router 3600.
Kind Regards
abd quqas
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52128&t=52128
--
FAQ, list archi
Dear All,
What is the correct way to set up exchange in the DMZ..
I know how to set it up in the inside interface but that is a security risk.
I would like to put IMC and OWA on the DMZ.
And keep the Mail Server on the inside
Thanks,
Kevin
___
that was configured but the interfaces flaps up and down
Best Regards,
Mohamed Saro
Network Division Manager
T.E. DATA
Tel: +20-10 -1663531
Tel: +20- 2 -7494025
Ext:1102
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 27, 2002 10:24 AM
I have a customer who has many different kinds of catalyst switches. I am
deploying VoIP for them.
I am familiar with doing L2 QoS for 2900/3500XL and 2950/3550 switches, but
I am not sure how I can do some kind of traffic prioritization with
1900/2800 series switches. I am trying to figure out
Folks, I am in need of a quick help.
I have 2610 doing 3DES for site-to-site VPN. It creates a tunnel
successfully, but it crashes and gives me an error messgage below.
*** System received a SIGTRAP exception ***
signal= 0x5, code= 0xd00, context= 0x81640a98
PC = 0x80db4414, Vector = 0xd00, SP =
For the first problem, I can see in routing table the concept of Forward
metric, if bandwidth are unequal, first route has :
IR_AS200_AREA1#sh ip route 0.0.0.0
Routing entry for 0.0.0.0/0, supernet
Known via "ospf 1", distance 110, metric 100, candidate default path, type
NSS
A extern 2, forwar
Hi all,
I have some questions about Type 7 LSA default-routes propagated by ABRs.
Consider a NSSA with two ABRs. Each ABR propagate a default route with a
cost of 100 (commands are : area 1 nssa default-originate & area 1
default-cost 100).
On a Internal router directly connected to each ABR, I c
Hi, I just got a cisco 4000(it is not a 4500 or a 4700 but a plain 4000) for
my home lab. But when I start it up it gives me a error saying "Failed
sizing main memory". I tried cisco's website but couldn't find anything on
this error. I would appreciate any help on this.
Message Posted at:
http:
oh,My god.I am a chinese too.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52119&t=52060
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
On the DCE interface you have to enter the following command:
clock rate .
Rgrds
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52120&t=52117
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
81 matches
Mail list logo
