What is the passing score for the SAFE test?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73976&t=73971
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and su
Can you tell us the minimum passing score for the CCIE wrtiiren test?
I realized Cisco has changed the written to a 2hr/100 Qs format starting
3/28.
Thanks,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66693&t=66364
--
FAQ, list
Thanks. That is the confirmation I need.
cheekin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60995&t=60894
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclo
Hi all,
Please do not ask from me the site.
I would just like to know if there has been any form of violation.
Thanks,
cheekin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60929&t=60894
--
FAQ, list archives, and subscription
Hi all,
I have two cisco 2621 router, each router connect to T1 line via serial
interface. My question is: How can I configure the router, so it could
perform load balancing between those two T1 lines? Can anyone give me a
simple configuration or URLs?
Thanks
Ricky
Message Posted at:
http:
t; command. Thanks
Ricky
-Original Message-
From: Winston Shaw [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 01, 2002 4:30 PM
To: Chan, Ricky; [EMAIL PROTECTED]
Subject: RE: Routing Question [7:50431]
Please be sure that no auto-summary is configured under the Eigrp processes.
Winston
: Thursday, August 01, 2002 4:30 PM
To: Chan, Ricky; [EMAIL PROTECTED]
Subject: RE: Routing Question [7:50431]
Please be sure that no auto-summary is configured under the Eigrp processes.
Winston
-Original Message-
From: Chan, Ricky [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 01, 2002 3
-Original Message-
From: Chan, Ricky
Sent: Thursday, August 01, 2002 3:30 PM
To: [EMAIL PROTECTED]
Subject: routing question [7:50434]
Hi all,
I have a question about routing issue. Let's say I have two routers
interconnected with serial cables. Router1's s0/0 connected to
ce.
Ricky
-Original Message-
From: Roberts, Larry [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 01, 2002 3:59 PM
To: Chan, Ricky; [EMAIL PROTECTED]
Subject: RE: routing question [7:50434]
Do the machines have a default gateway? Do the remote routers show each
others LAN's in
Hi all,
I have a question about routing issue. Let's say I have two routers
interconnected with serial cables. Router1's s0/0 connected to Router2's
s0/0 and Router1's s0/1 connected to Router2's s0/1. It is for redundancy
purpose. MachineA at Router1 would be able to communicate to MachineB at
R
Hi all,
I have two 2600 series routers setup with 2 serials connections to each
other for redundancy. It means when one serial connection failed, the other
one still connected. However, I can't get that to work. Below are the
router1 and router2 configuration:
router1
fa0/0 = ip address 10.10.
Hi!
Unity Software can install under any win2k server or it must install under
cisco listed server ?
""supernet"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I wonder if I can install both callmanager and unity on 1 machine.
> Anyone did this?
>
> Thanks.
> Yoshi
Message
Hi all
Can someone tell me what is the purpose of the native vlan in Csico Switch?
What is the feature & main usage on that?
I am wondering if it is a proprietary feature, it will only work through
Cisco Switches only?
Thanks.
Cheers
Stephen
Message Posted at:
http://www.groupstudy.com/form/
Hi all
In the book of Cisco Routing TCP/IP Voulme 1, it mentions that the OSPF
point-to-multipoint network type treats the underlying network as a
collection of point-to-point links rather than a multi-access network,
and OSPF packets are multicast to the neighbors. This situation can be
problema
Hi all,
I can't connect to my internal web server from outside even though I put in
the "IP NAT.." command. Is there anything else I missed? Please let me know.
Here is the command I put in the c2600 router:
ip nat inside source static tcp 10.0.0.5 80 141.155.121.134 80 extendable
Thanks
Ric
Hi all,
I configured a cisco 2600 router behind a ADSL router. It is working
perfect, but I can't telnet to my router from outside, it said the target
machine actively refused it. I pasted my router's configuration below,
please advice.
Thanks
Ricky
!
version 12.2
no service pad
service tcp
I'm sorry.
-Original Message-
From: Andy Barkl [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 10, 2002 4:13 PM
To: Ricky Chan; [EMAIL PROTECTED]
Subject: RE: CCDP [7:41071]
I am sorry but you are incorrect.
http://www.cisco.com/warp/public/10/wwtraining/certprog/lan2/progra
No. Just you need CCDA, routing, switching, remote and Design to be CCDP. No
need to have CCNA.
Ricky
-Original Message-
From: Andy Barkl [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 10, 2002 3:32 PM
To: [EMAIL PROTECTED]
Subject: RE: CCDP [7:41071]
You must have the CCNA, CCDA, a
Hi,
Does anyone know which IOS version can support PPPoE + NAT + Firewall
function. Please let me know.
Thanks
Ricky
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41031&t=41031
--
FAQ, list archives, and subscription info: h
be a CCNP until you
finish your CCNA.
-Original Message-
From: Ricky Chan [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 04, 2002 8:28 AM
To: [EMAIL PROTECTED]
Subject: RE: a question related ccnp paper [7:40443]
Yes, it is.
-Original Message-
From: Farooq Ahmed [mailto:[
Hi,
I setup a 2600 router behind the ADSL modem. My question is, how can I FTP
from outside which can convert the IP to my private LAN at home?
For example,
My public IP is 124.234.23.34/24
My internal FTP server is 10.10.10.2/24
If I FTP to 124.234.23.34, it can convert it to 10.10.10.2, how
Yes, it is.
-Original Message-
From: Farooq Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 04, 2002 1:11 AM
To: [EMAIL PROTECTED]
Subject: a question related ccnp paper [7:40443]
Can any body confirm me either ccna is prerequiste for ccnp or not.
Some of my friends say yes it is
Hi all,
I have another scenario question and would like to hear from your expertise
opinion.
machine A 10.10.10.1/24
machine B 10.10.10.2/24
machine c 10.10.100.1/24
I configured IPSEC for all these machines. Machine A can talk to Machine B,
but Neither A and B can talk to Machine C. Obviou
Hi all,
Is there any good articles about how to configure c2600 with IPSEC to
connect to Windows2000 (IPSEC ready) environment?
Thanks
Ricky
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39798&t=39798
--
FAQ, list archives,
It have only 2 regular ethernet port...
-Original Message-
From: Walker, Jim [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 28, 2002 12:55 PM
To: Ricky Chan; [EMAIL PROTECTED]
Subject: RE: Router question.. [7:39788]
Yes, if 2600 series router has a fastethernet port.
Router on a
, 2002 12:54 PM
To: Ricky Chan; [EMAIL PROTECTED]
Subject: RE: Router question.. [7:39788]
> Just the two ethernet ports (by default). My question is, is
> it possible?
Configure trunking (ISL or 802.1q) on the router (you'll only need one
ethernet port) and put three VLANs on
Hi all,
> My boss just come up and give me a senario question like this. He told me
> that I owned a company which uses 3 different LANs, for example,
> 172.27.10.x, 172.27.11.x, 172.27.12.x. But I only have one cisco 2600
> series router and 2900 series switch. I can't use the serial ports from
Hi all,
My boss just come up and give me a senario question like this. He told me
that I owned a company which uses 3 different LANs, for example,
172.27.10.x, 172.27.11.x, 172.27.12.x. But I only have one cisco 2600 series
router and 2900 series switch. I can't use the serial ports from the rout
My bootstrap is 11.3(2)XA4 of 2612 cisco router. After I remove 8M flash to
16M flash and upgrade to 12.2-6 IOS,
boot process cannot recogonize flash program occur.
What is the problem!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32577&t=32577
)
Office A Office B
Is there a way to do the route using the same range for both office
without subnet it??
Thanks
Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=29750&
TEI = 0, Ces = 9, SAPI = 16, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x0
Number of L2 Discards = 0, L2 Session ID = 0
thanks
Chan
Message Posted at:
http://www.groupstudy.com/for
but l am also a HK citizen.
Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27693&t=27653
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viola
IS IOS 12.09 of cisco 2503 to configure Net3 protocol.
If can , how to configure.
""Paul Ferguson"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello Pierre,
>
> You are correct, the Simline 2 does not support SPID's but it will work
> perfectly when you select the switch type
thank for u help!!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21855&t=21836
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROT
Anyone can help me to answer this 3 question??
1.Which command can you use to verify that a router interface has been
configured for CGMP?
a.show interface
b.show run
c.show pip
d.show cgmp
** i think the answer should be "a", pls cfm!!
2.Which command(s) are required to configure the MLS-SE t
How about ATM ,VoIP equipment or catalyst 5K equipment?
""Jon Mendoza"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello All,
>
> Having passed my lab exam I am looking to sell the following equipment:
>
> 2511 with 16MB/16MB - 2 octal cables (total 16 async lines), 1 Ethern
Dear all
My office applicate is Easy Clear but when i use this
function to print out
document ,
it prompt
"OLE error code 0x80040154 class not registered OLE object is being
ignored Record
number :4 "
then prompt fatal error " Error number is 1925 "
How to solve this problem
how to change from half duplex to full duplex,
and how to change NIC from 10 to 100
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15216&t=15216
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.
alf or full) on both (making sure they match). Without any more
> information
> from you, this is the first thing that I would look for.
>
> Craig.
>
> - Original Message -
> From: parky chan
> To:
> Sent: Tuesday, August 07, 2001 1:06 AM
> Subject: Netwo
Hi,
Has anyone experience any problem that I had encounter the situation where I
have
R1 --R2
|
|
R3
on R1
dlsw local-peer peer-id 72.17.22.5
dlsw remote-peer 0 tcp 92.168.155.41
dlsw remote-peer 0 tcp 92.168.155.5 backup-peer 92.168.155.41 linger 5
on R2
dlsw local-peer peer-id 92
Dear
My office (arround 10to 15 computer)
The LAN speed very slow But i have used switch replace hubs
what problem ?
and how to solve this?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15074&t=15074
--
FAQ, list archives, and
Dear
Our office network trafic too slow,
I have used switch replace hub
but the traffic also slow.
what 's problem i need to slove.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15063&t=15063
--
FAQ, list archives, and subscri
Hi,
Does anyone attended a good value CCIE bootcamp for their CCIE preparation
LAB exam? I really do not want to spent my money on classes that only offers
concepts and simple LAB setups. If anyone have good recommendation, please
point me to the right direction direction. Thanks.
Regards,
Sam.
Dear,
What is the different of the network Layer and Data Link Layer ?
Data Link Layer is means the data where need to go?
Network layer is means the data which address need to go?
That 's right ?
CAn You Help me solve this problem?
Message Posted at:
http://www.groupstudy.com/form/read.php?f
Thank You for your Help
Mohamed El Komy wrote:
> "parky chan" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Dear
> > What is the different of routing protocols and routed protocols
> > and give me example?
> >
> > Ro
What is the different of the bridge and switch ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11656&t=11656
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondiscl
Dear
What is the different of routing protocols and routed protocols
and give me example?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11655&t=11655
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/
ear, please post your email address so that I can send
you
> > some information.
> >
> > ""parky chan"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Dear,
> > > i am going to exam the CCNA 640-570 ,
>
ill can't find jobs, so I don't know if I'm doing any
> good. If you would like to explore this free option and help out my tax
> deduction this year, please post your email address so that I can send you
> some information.
>
> ""parky chan"&qu
Dear,
i am going to exam the CCNA 640-570 ,
can you give me some tips to exam this subject?
i don't want to fail . because i no more money to exam again .
Pls Help me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10938&t=10938
---
Hi
when I upgrade from Ver11.2 IOS to ver12.09 Ent. IOS, then I reload it.
There is memory requirement statement occur. Is there any memory requirement
for 4500 of IOS 12.09 ?
Looking for answer!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10612&t=10612
-
Dear All,
I am installing a E&M voice card for a VoIP case.After I connect it to the
PABX,I can not hear the dial tone when i pick up the phone.Anyone know what
may cause this problem?
Thanks in advance!
Aviva Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=949
Dear
How to make a VLAN at my company
my company has 100 PC
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8921&t=8921
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Dear all Expert
can you help me solve this problem?
if i don't know the administrator password (N.T.)
but i need to use admin right to do something
what can i do?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8916&t=8916
--
FAQ
Dear all Expert
can you help me solve this problem?
if i don't know the administrator password (N.T.)
but i need to use admin right to do something
what can i do?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8913&t=8913
--
FAQ
can you give me some opinion about networking job
if i get CCNA , which job i can work
and CCNP is difficult?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8472&t=8472
--
FAQ, list archives, and subscription info: http://www.gr
also use
cross cable.
Hope this will be helpful!
Cheers,
Aviva Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8124&t=8061
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
what is the fast and easy method to count I.P and subnet mask
can you help me ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8106&t=8106
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
R
solve this problem.
Thank you
Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5431&t=5431
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vi
like to know more abt it as well as price
Muhammad Tariq wrote:
> IF you guyz are intrested to buy Cisco Training+ Testing stuff contact me
> Cisco Testing have been tested with 100% success its better than any boson
> or ccprep or transcnder thing
> it gives 100% success and created after very
How do you disable telnet port on the cisco router 2524 and 2610?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3237&t=3237
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscondu
I have use netmonitor to capture some packet. What is a good protocol
analayzer or a tool that decodes that info? I can not read it to understand
the information I have gathered.
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3222&t=3222
--
Do anyone know of any free sniffers? Is there any web sites you can refer
me to?
Thanks.
Victor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3035&t=3035
--
FAQ, list archives, and subscription info: http://www.groupstudy.c
Hi All
After i have copy my running config to start using "copy run start" then
reload my router,but when i do a sh run or sh start the config is
gone.Can anyone advise on this.
Thank you
Regards
Chan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
Hi guys,
I read that distance vector routing protocols use the logical broadcast to
send its periodic update. What MAC address does it use then? Broadcast too?
Also, would the recipient of the periodic update send it out again because
it is a logical broadcast?
Thanks in advance.
Hing
_
Hey guys,
I've read a section about exchanging DDP from McGraw-Hill's BSCN but I'm not
sure whether I interpreted right or not. This is my understanding.
After a router received information about its neighbours, it will try to get
information to establish its link state database. So, it will e
> shared memory, not shared bus. There is a difference. I don't
>have the URL handy, but Cisco has a paper out by the Stanford
>University professor who architected the GSR. It does a nice
>comparison of the three basic architectures, shared bus, shared
>memory, and crossbar. Shared bus r
e the SAR pool problem.
e.g.
interface ATM0/0
sar txpool 4
!
interface ATM0/0.123
atm pvc 123 0 123 aal5snap 50 25 100
sar vc 123 txpool 1
!
Best Regards,
W.S. Chan
CCIE#6546
-Original Message-
From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 6:03
So am I.
Henry Chan CCNP (Security)
-Original Message-
From: Arthur Stewart [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 10, 2001 05:43
To: [EMAIL PROTECTED]
Subject: Re: CCIE Security Written
I took the beta 8 weeks ago, but no response yet (you might get a better
response if
>For true integration and vendor support, my suggestion is to use all
>of the point products individually (get latest versions of CW2k/RME,
>Spectrum, Marconi NMS solutions) and then integrate them via an
>Element Management System (e.g. Cisco uses CEMF) that applies
>W3C's XML and OMG's CORBA te
Hi,
is anyone aware if there are any software that allows management of
configuration of network devices. i am looking for a software that is
capable of managing the configuration of eqpt including makes by cisco,
fore/marconi, cabletron etc. the software shld allow the configs to be
edited o
I have just taken my BCMSN test today (30/10) and have encountered
repeated questions in my test.
2 questions were repeated EXACTLY, word for word. i.e I got the same
questions twice.
Another question was repeated, essentially the same, but with some
wordings changed.
Too bad the repeated quest
Who is the client targeting for delivery of mail?? an internal machine or a
machine on the Internet..
Does mail server have some sort of limit on size of email or attachement?
At 08:37 AM 9/29/00 -0500, [EMAIL PROTECTED] wrote:
>Hey all,
>
>Am studying CIT related material and am wondering what
I also get pass today on my R&S written test. what is your time frame for
lab test?
SK
"McCallum, Robert" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
.uk...
> well done that man!. Good luck for your future studies. I presume there
> will be a few beers at the weekend. However n
HI...do you know is there any CCIE preparation lab class in TYO?
SK
perez claude-vincent <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I am looking for someone to work with me on the ccie
> lab or a place where I can practice it in Tokyo area.
> I al
hi all
Actually what i wanted is to do a one stage dialing from Singapore to
Hong
> Kong with the As5300.
> I would also attach a diagram for your info.
>
>
> AS i got a AS 5300 in Singapore and Hong Kong.
> In Singapore i got a E1 connected to the AS 5300. Normaly service provider
> will config
It's a great book, must read for CCIE level exam!!!
SK
Robert Padjen <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is a very good book, although I wish Ivan would
> update it with more information regarding EIGRP. I
> would (and have) recommended that no
this.
Thank , with regards
chan
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi,
I am using Cisco 2501 as a router. The router is
configured many access lists. One day, when I add the
new access list, I found a error messages from the
router:
- Configuration buffer full
What is the limitation of the configuration file? Is
there any way to increase the buffer?
Regards.
Hi All
i would like to take my CCDA exam next month. Will anyone know when i can
get study materials from the WEB.
Thank
Chan
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http
Hi,
I would like to take my CCDA, does anyone know where i can get resources for
the it.
Thank
chan
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct
Dear all,
Does any one setup the dialin solution with different pool. One pool
user has greater chance to access the network and 2nd pool of user has
lower chance to access the network.
Rgds,
Haorld
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/gui
Can't you make the IP address of firewall the gateway of each VLAN ?
-Ken
At 11:12 AM 7/21/00 -0700, Kent Hundley wrote:
>If your saying you want the devices on each VLAN to have to transit the FW
>to talk to each other, you have 2 choices:
>
>1) Install 1 nic in your FW for each VLAN, the IP a
e:
> You only setup a username and password if you are using pap or chap
> authentication. If you don't use any authentication then no password or
> username is required.
>
> -Original Message-
> From: harold chan [mailto:[EMAIL PROTECTED]]
> Sent: 18 July 2000
Dear all,
When setup ISDN dial in, is it necessary that we need to assign User ID
and password. Suppose it only support sigle channel BRI.
Rgds,HC
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
Dear all,
A simple case study, two Routers connected by async line using Modem.
They are doing file transfer from one site to the other. Suddenly, there
is a distortion in the connection and then the file transfer resume
normal again. What kind of protocol is responsible rebuild the file
transfer
Dear all,
How can I configure the ISDN BRI interface which control the dial in
user only can have ONE BRI ?
Rgds,
HC
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Repor
Dear all,
Does any one know where can I get the state machine diagram of Tacacs+
Rgds,
HC
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclo
Dear all,
Does anyone what will be the subnetmask be provided by using PPP dial
up ? Classfull or Classless. (Assume that we are using DHCP) Why ?
Thanks in advance.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, an
Does any know what kind of information will be got via DHCP. (using
Async dial up)
I know, it should contain ip address, wins server address, classfull
network mask...
What else ??
Thanks for info.
HC
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list
Hi,
My company have about 50 numbers of Cisco routers. I
want to backup their running config. I do not have
Cisco Work. Can I use SNMP to get their config? What
is the MIB id?
Regards.
Dovelet
_
Do You Yahoo!?
§K¶Oµn°O @yahoo.com.hk ¹q¤l¶l
sing C-band?
>raf
>
>-Original Message-
>From: Yip Chan Keong <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Tuesday, July 11, 2000 8:24 AM
>Subject: VSAT connection
>
>
> >Dear all,
> >
> >Does anyone has any expe
Dear all,
Does anyone has any experience in connecting VSATs to AS5300? We have a 20W
VSAT antenna with a 301 IDU which is in turn connected to a 2600 router.
the AS5300 is connected to the 2600 thru ethernet.
Can anyone comment if this arrangement is OK?
Many thanks in advanced.
best regards
Hi,
I intend to take CIT this week. I wonder whether I should take CIT 4.0 and
Support 2.0. Do anyone know the difference between both exams? I've studied
both Cisco and Sybex CIT textbook. Are they enough for me to pass Support
2.0 exam?
Many thanks for your advise.
Kenny
Best of luck
SK
<[EMAIL PROTECTED]> wrote in message 8k7dbv$6k5$[EMAIL PROTECTED]">news:8k7dbv$6k5$[EMAIL PROTECTED]...
> yeah, Im taking it on Tuesday.
>
> -B
> ""Carlos Patriawan"" <[EMAIL PROTECTED]> wrote in message
> 005401bfe8e9$b0b1f5a0$[EMAIL PROTECTED]">news:005401bfe8e9$b0b1f5a0$[EMAIL P
Could you post your config for discussion
SK
Tony Russell <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Don't ask me why but we are connecting ISDN TA's to the Aux port of a
router
> for backup purposes. I have gotten everything to work but was wondering
if
Hi all,
Is there any server in the internet which allow me to
telnet to it? Because I want to telnet to the internet
and check the connectivity of my company's DMZ.
Sorry for off topic.
Regards.
Dovelet
_
Do You Yahoo!?
§K¶Oµn°O @yahoo.co
Hi,
I our company, we have a HP Openview NNM and some
Cisco routers (4500, 7200). After I setup the NNM, I
found that I always receive a SNMPTRAP "TCP connection
has been terminated. (tcpConnectClose Trap)
tsLineUser:" from the routers. Does anyone know what
does this message means? Is there any
Hi all,
I can use SNMP to get the network utilization of a
interface. However, can I use SNMP to get the network
utilization of the frame relay port and ATM port where
they are in sub-interfaces. Is there any MIB ID can
allow me to do so?
Regards.
Dovelet
___
For your reference:
.1.3.6.1.2.1.2.2.1.10 - Receive byte/sec
.1.3.6.1.2.1.2.2.1.16 - Transit byte/sec
.1.3.6.1.4.1.9.2.2.1.1.6 - 5 mins average of input
bit/sec
.1.3.6.1.4.1.9.2.2.1.1.8 - 5 mins average of output
bit/sec
I hope it can help you.
Regards.
Dovelet
--- [EMAIL PROTECTED] wrote: > D
100 matches
Mail list logo