I took it on Friday. I personally marked about five questions and returned
to them after completing the last question. If you're going to take it
soon, take a look at the Exam Cram "Routing & Switching" book the day before
and of the test. If you have studied properly this book is good refreshe
I've searched Cisco's page and do not see such a certification. If one
exists, do they have an outline for it?
""Lee"" <[EMAIL PROTECTED]> wrote in message
93lm3h$dul$[EMAIL PROTECTED]">news:93lm3h$dul$[EMAIL PROTECTED]...
> Has anybody taken the Understanding PBX Systems and Technology online
test
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38181&t=38181
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I am using Cisco VPN Client to connect with my Office PIX 515 firwall over
IPSEC 3DES encryption. My connection is droping automatically. It is not
because of idle time out or maximum time out. it happens on radomly. If some
one has any information on it.
Message Posted at:
http://www.groupstu
I have setup Site to Site VPN between our corporate PIX 515 and our
developers PIX 501, i want to moniter the VPN traffic of these Site to Site
VPN connections.
Please tell me what tools are available to accomplish this.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http
/ PAT. and your Web Server / Email Server is always UP.
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62907&t=62907
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
Here is a correct statment for Access group
access-group acl_out in interface outside
Rest is correct.
--
Curious
MCSE, CCNP
""Ismail Al-Shelh"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> 10.10.0.0 255.255.0.0---515E PIX FIREWALL-
I want to do a loopback testing between my router and a remote router over a
Frame Circuit.
Tell me what i need to configure
Both routers are Cisco 2600 and running 12.0 IOS.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63515&
Yes it has a BuiltIn CSU/DSU
--
Curious
MCSE, CCNP
""Priscilla Oppenheimer"" wrote in message
news:[EMAIL PROTECTED]
> Do the routers have built-in CSU/DUSs? That makes a difference.
>
> Priscilla
>
> Curious wrote:
> >
> > I want to do a
I have a Win2k VPN server that just got Hacked, we have decided to move it
behind the firewall.
Any one knows what ports i needs to open on my firewall so that my PPTP vpn
client connects to it.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&a
Didn't quite understand your question.?
--
Curious
MCSE, CCNP
""Ahmed Ali"" wrote in message
news:[EMAIL PROTECTED]
> Hi,
>
> I've in the process of configuring and 806. However I can ping the
external
> interface on the router from the internal
vice is not suitable for
Site to Site VPN.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65596&t=65596
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
the PIX
or Create VPN tunnel between router and Host 2 etc. I dont know what OS you
are running on Host 2 but most of the Server OS supports VPN tunneling.
--
Curious
MCSE, CCNP
wrote in message
news:[EMAIL PROTECTED]
> The IPSec tunnel is between the Router and the PIX. Only Host1's tr
Hello again friends, I want to thank Mr Jvd for his help, and I would like
to post again my question, It is very surprising that we all have been
working with routers for years but there is no answer for this question, I
can evaluate the ammount of memory used in my router for every type of
route,
welcome.
thanks
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=69877&t=69877
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondi
Hello folks,
I have to evaluate the impact of adding almost 1000 routes in my network,
and what I want to know is simple: How many memory do I need for every new
router? Do you know a simle rule? What I want to know is the relationship
between the number of routes and the memory consumption. I can
Hello friends,
I suppose that this is an easy question, but I want to make clear it. It
is about the meaning of "traffic share count" that I can see when I execute
an "show ip route" command:
Router#sh ip route x.x.x.x
Routing entry for x.x.x.x/28
Known via "static", distance 1, metric 0 (connec
Hello,
I know that is a bad idea to configure a port with "portfast" when this port
connect with other switch (loops can be created), but the question is: could
I put a port connected to a router in portfast mode? A router is a layer 3
device not a layer 2, so I think this is not a risk, am I righ
Clients are behind Linksys Cable/DSL router and in the office we have PIX
515.
PIX assigns IP address from Local IP address Pool.
""Curious"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am using Cisco VPN Client to connect with my Office PI
Guys
Any of you familier with issues between ISDN and Cisco VPN Client (IPSEC
3DES). All of my ISDN users unable to VPN using Cisco VPN Client, and we
have pICX 515.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=40807&t=40807
-
Hi
I dont think you can make PIX DHCP Relay Agent , athough you can make router
as DHCP relay agent(by using IP Helper Address) or make your Windows 2000
Server as DHCP Relay agent.
--
Curious
MCSE, CCNP
""Ashraf Hozayen"" wrote in message
news:200210170740.HAA27183@;gr
restart the router.
--
Curious
MCSE, CCNP
""John Tafasi"" wrote in message
news:20022125.VAA01591@;groupstudy.com...
> Can some one tell me how to clear access-list counters? I tried to use the
> command "clear access-list counters" but it did not work.
PIX supports GRE, i have setup GRE tunnel between my 2 sites. Here is link
which might helps you.
http://www.cisco.com/en/US/tech/tk648/tk367/technologies_configuration_examp
le09186a00800a43f6.shtml
thanks,
--
Curious
MCSE, CCNP
""The Long and Winding Road"" wro
015 ARCHITECTURE ADSL & DSL CBT
CISCO CAMPUS - OPTICAL - DWDM - DESIGN CBT
CISCO CATALYST 6000 SERVER LOAD BALANCING CBT
CISCO AIRONET WIRELESS (WLAN) TRAINING CBT
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/rea
ICMP command and also
ICMP ports are open on access list on outside interface.
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57894&t=57894
--
FAQ, list archives, and subscription in
Is there a tool which gives me very good traffic analyses or traffic
monitering on my Cisco Routers / PIX FW (Serial and Eth) Interfaces, over
Ethernet and T1 Link.
Thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58193&
Guys
Tell me the best Online library to Read IT books (Cisco) online.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58794&t=58794
--
FAQ, list archives, and subscription in
Any one of you every use PIX 501 with Verizon DSL modem, which uses PPOE.
How we can specify and user name and password in PIX 501 so that it can
connect with Verizon DSL modem.
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58796&
Guys
I have just installed PIX 501 at my home network, i can not do VOICE / VIDEO
chat through MSN Messanger / Net Meeting.
For testing i am permitting IP ANY ANY on outside Interface. Still same
issue,
Let Me know if you know the fix or work around to this problem.
thanks,
--
Curious
MCSE
Well ! when i dont use PIX and attact my computer with my DSL modem (MSN
DSL) it work fine, i was also running my web site on my own server with out
the issue, but now since i put PIX 501, every thing else work but Audio -
Video Chat.
thanks,
--
Curious
MCSE, CCNP
""Stull, Cory&q
light on PIX 501 but can not access any thing in our office network) on
PIX 501 I see the Crypto map, and access list counter increase on 501 but on
PIX 515 side i dont see his PIX 501 in crypto map.
I thought of timeout or in activity time out issue. Please Advice.
thanks,
--
Curious
MCSE, CCNP
Guys
Is there any MIB for PIX 515 IOS Ver 6.2 for FailOver.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59136&t=59136
--
FAQ, list archives, and subscription info: http://www.groups
Guy-
I have seen a phone that you plug with you telehone line any where in the
world ( in my case pakistan) and setup your ISP information in to this
phone, and when ever to call to and from USA to/from that phone it will only
cost you 5 c per min.
Any one is familer with it, what kind of phone is
Faisal
I know about dialpad and net2phone, what i was looking for is a system that
allows me to plug an IP phone with my telephone line and allows me to call
any where in the world over internet.
Dialpad and Net2Phone rates are very high.
""Khan Faisal"" wrote in message
[EMAIL PROTECTED]">news:[
0 output buffer failures, 0 output buffers swapped out
2 carrier transitions
DCD=down DSR=up DTR=up RTS=up CTS=down
If some one shed any light on it.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
Guys
Tell me the best place to learn / certify on VO/IP in New York City / NJ
area.
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61957&t=61957
--
FAQ, list archives, and subscription in
Open Question
How do we detect the source of collision, i am experiencing alot of
collision on my LAN, which consisit of 10 Base T HUBS and 10/100 Switches, i
am seeing alot of collision, but i dont know where is a Source, If some one
knows how to detect the source of collsion will be great he
Re-Install the Correct IOS.
"". ."" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>
> I have a Cisco 2651 with two Fast Ethernet interfaces. I have accidentally
> installed a Cisco 2600 IOS image. now when I do a "show run" the
interfaces
> are not there anymore. I tried t
Guys
I am interesting in taking CSS 1 training, Please let me know if you
recommend any insitute in New York City Area.
Thanks,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50184&t=50184
--
FAQ, list archives, and subscriptio
I want to know the current bandwidth of my serial Interface of Router. Lets
say i have a fractional T1, how would i know what bandwidth i have for my
serial interface.
thanks,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50381&t=50381
--
Fadi
I used CCNP SwitchSIM, it was crap. I felt like i wasted my money on it. I
wont recommend this to any one.
""Fadi Younes"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all,
> I am planning to buy a CCNP simulation software and i am trying to
> choose between to ava
One of our user having issue on his Windows XP machine after he installed
Cisco VPN Client.
"He can not Switch User" in Windows XP.
Please let me know if some know this issue, and any possible solution.
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read
omain names from
Private LAN but not from Public Lan or Internet.
Please let me know if some one has any idea Y...?
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53016&t=53016
--
FAQ, list
,
although there was correct entry in translation table and there was no
typing mistake in access-list.
--
Curious
MCSE, CCNP
""Mark W. Odette II"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Be sure you have the permit statement for DNS(53) applied
O Yes!
--
Curious
MCSE, CCNP
""Roberts, Larry"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does your access-list look like this:
>
> Access-list 100 permit udp any host a.b.c.d eq domain
>
> Where a.b.c.d is the EXTERNAL ad
All-
Any one knows to configure site to site VPN over IPSEC tunnel b/w PIX 515
and OpenBSD.
Thanks
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53511&t=53511
--
FAQ, list archives, and subs
Hello, I have a question for throubleshooting guys!
Suppose that I want to sniff traffic from two differentes vlans, let's say
vlan 2 and vlan 3, simultaneously in the same CATOS switch. I want to put my
sniffer in port 0/1 (for example), I would do this:
1) set span 2 0/1 both create
Maybe I am wrong, but if I want a router speaking ospf to generate a default
router I must configure "default-information originate" under ospf. With
this command when the router speaking OSPF has a default route in its
routing table it will adevertise a ospf default route. For example, if I
have a
Fellows
Where is the best place to buy International VOIP minutes, e.g I have a
voice gateway and i want to call India on a regular phone, i have to have a
voip gateway in inda to make this call or if some one already has voip
gateways in india and they are selling there minutes.
does it make sence
appearing
in front of this IOS but i can still see its in the flash. I rebooted the
router but it is still here. I want to keep c2600-ds-mz.122-7.bin
thanks,
--
Curious
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74459&
ios but it is still showing up in Sh FLash.
what is most recommended of deleting IOS from Flash if u have more then 1
IOS>
thank
--
Curious
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74457&t=74457
--
**Ple
Hello friends, I have an spanning tree question for you!
I have a lot of switches connected between them, but I have seen
something that I can not explain very well. Two of these switches are
connected using two cables:
Switch1 Switch2
Port 29 ---
Hello Marko, you said:
"I might be giving you wrong answer, but if one port is in blocking and the
other one in blocking state, link is down in any case. The whole point of
STP is acomplished"
But this is not right, my ports are "up/up", but one of them is
in forwarding state and the other in blo
Thanks bharani, I thought this, but neither Switch1 or Switch2 is
the root bridge:
Switch1:#sh spanning-tree
Spanning tree 1 is executing the IEEE compatible Spanning Tree protocol
Bridge Identifier has priority 32768, address 0005.5e0c.57b6
Configured hello time 2, max age 20, forward del
Hello friends, I want to thank every answer to this post. I knew that a port
with spanning tree in blockin state has not any relation with being "down", I
was surprised with some answers. What surprised me, is that one port were in
forwarding state and the port in front be in blocking state. For m
Brave!! This is exactly the kind of answer I was waiting for. Just
common sense, now I understand it, and I feel like a stupid because
the answer is obvious.
Thanks Zsombor
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74685&t=74594
---
Hello dear friends,
I would like to know the meaning of the keyword "receive" that I
can see when I execute a "show ip cef" command:
For example:
show ip cef
Prefix Next Hop Interface
The history:
Author: Zsombor Papp (---.dsl.snfc21.pacbell.net)
Date: 09-08-03 14:47
It means that's the router's own IP address.
Thanks,
Zsombor
Curious wrote:
>
> Hello dear friends,
> I would like to know the meaning of the keyword "receive" that I
>
Hi Zsombor, what do you mean?? Why the router has the broadcast IP in
"receive" mode?
I would like to know more about this ;)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=75224&t=75161
--
**Please support GroupStudy by purchasi
59 matches
Mail list logo