A speed mismatch can occur when the source and destination ISDN ports do not
belong to the same network.
try setting
The following example sets the line speed for incoming calls to 56 kbps:
command
on bri int
isdn not-end-to-end 56
or 64(def)
-Original Message-
From: [EMAIL
AGREE
-Original Message-
From: Torren Craigie-Manson [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 9:37 AM
To: [EMAIL PROTECTED]
Subject: Disaster Recovery Documentation? was Re: what's wrong with CCIE
[7:13180]
Sean Young wrote in message
[EMAIL PROTECTED]">news:[EMAIL
u need to put your serial no
and u ll get a new key
u need cco login
-Original Message-
From: Jacques Allison [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 5:24 PM
To: [EMAIL PROTECTED]
Subject: PIX activation key on 4.1(6) [7:13187]
Hi all,
On PIX ver 4.1(7) I can use the
just need a copy tftp flash command
-Original Message-
From: chica [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 9:31 PM
To: [EMAIL PROTECTED]
Subject: tftp server! [7:13203]
hi,
i'm setting up my lab and want to install the tftp
server on one PC.I would also want to
installed.
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 7:57 PM
To: [EMAIL PROTECTED]
Subject: RE: PIX activation key on 4.1(6) [7:13187]
u need to put your serial no
and u ll get a new key
u need cco login
-Original Message
write any file name .bin
-Original Message-
From: Ray Smith [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 4:54 AM
To: [EMAIL PROTECTED]
Subject: HELP with BOOTUP [7:13031]
I have a cisco 2503 router that is in the mode of Router(boot). I have
tried doing a copy tftp
use redistribute command..
-Original Message-
From: pat [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 6:51 AM
To: [EMAIL PROTECTED]
Subject: routing issue with ISDN backup [7:13045]
Hello everyone:
I have some routing issue here.
I have central office with a core
remove all the wics and then boot
put the wic first in 0 then 1
which wics u have
-Original Message-
From: chris klebl [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 7:10 AM
To: [EMAIL PROTECTED]
Subject: Q about configuring new WIC's [7:13051]
i have recently gotten 3
-Original Message-
From: sakella locuz [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 11:51 AM
To: [EMAIL PROTECTED]
Subject: PIX.. [7:13067]
Can anyone update me with the advantages of PIX over Checkpoint and
Gauntlet?
-a-
Message Posted at:
-Original Message-
From: Marc Maiffret [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 20, 2001 10:48 PM
To: [EMAIL PROTECTED]
Subject: CodeRed: the next generation
The following is a description of a variant Code Red worm that we have
found to be in the wild. Sorry for the rough content
tm
-Original Message-
From: Charles Ryan [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 12:04 AM
To: [EMAIL PROTECTED]
Subject: AGS+ as a frame-relay switch [7:13133]
Apologies if this has already been covered once before.
Quick question regarding setting up an AGS+
any thoughts welcome
we have a lan including proxy server and database server
there are two depts in the lan , one public and one private, ther is no vlan
and not supported on switch
the public department connect to the internet via proxy server which has a
acounting software connection to the
any thoughts welcome
we have a lan including proxy server and database server
there are two depts in the lan , one public and one private, ther is no vlan
and not supported on switch
the public department connect to the internet via proxy server which has a
acounting software connection to the
sorry but i couldnt understand
do u want from the notebook to ping hosts
if this is the case
ther is a command
router(config)#async-bootp dns-server
to pass the dns server to dial up clients
Best Regards
Have A Good Day!!
Farhan Ahmed
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network
if it is fully
qualified. I thought that the domain-list command would enter the DNS
suffix into the adapter,but it's not. We are taking care of this now by
just manually entering the DNS suffix in the connection properties.
I tried the async commands but nothing has changed.
JR
Farhan Ahmed wrote
yes u just need a
async-bootp dns-server
command folowed by yr dns srv ip
and u are done
and remove the dns suffix from client as welll
Best Regards
Have A Good Day!!
Farhan Ahmed
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network Engineer
Mideast Data Systems Abudhabi Uae
can u send sh int output
uncleared and after clearing counters...
-Original Message-
From: Eric Mwambaji [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 9:51 PM
To: [EMAIL PROTECTED]
Subject: Latency on ATM interface - Any ideas [7:12978]
I experience intermittent increased
send me in using different MTU sizes in extended pings
-Original Message-
From: Eric Mwambaji [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 9:51 PM
To: [EMAIL PROTECTED]
Subject: Latency on ATM interface - Any ideas [7:12978]
I experience intermittent increased latency on
will ping hosta
he ll get a reply
from
hosta.zonea.co.ae
what do u say?
-Original Message-
From: Hire, Ejay [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 10:43 PM
To: 'Farhan Ahmed'; [EMAIL PROTECTED]
Subject: RE: Remote Access [7:12958]
The Async BootP commands only work
solution appears to be proxying the ip requests to a dhcp server,
or router acting as a dhcp server. I'll be testing it in a minute or two.
-eh
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 2:04 PM
To: [EMAIL PROTECTED]
Subject: RE: Remote
be testing it in a minute or two.
-eh
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 2:04 PM
To: [EMAIL PROTECTED]
Subject: RE: Remote Access [7:12958]
yes u just need a
async-bootp dns-server
command folowed by yr dns srv ip
and u
u need to cont ur telco they are dropping ur traffic
is there too much load on line?
-Original Message-
From: Eric Mwambaji [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 19, 2001 11:23 PM
To: Farhan Ahmed
Subject: RE: Latency on ATM interface - Any ideas [7:12978]
ping
Protocol [ip
set a static route
ip route 0.0.0.0 0.0.0.0 serial0
ip route 0.0.0.0 0.0.0.0 serial0
r u using unnumbered?
send me sh int s0
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 2:06 PM
To: [EMAIL PROTECTED]
Subject: WAN link funnies - UP UP
Caveats
Caveats describe unexpected behavior in Cisco IOS software releases.
Severity 1 caveats are the most serious caveats; severity 2 caveats are less
serious. Severity 3 caveats are moderate caveats, and only select severity 3
caveats are included in the caveats document.
For information on
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
send me the sh int
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED
errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject
=up DSR=up DTR=up RTS=up CTS=up
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
send me the sh int
-Original Message-
From: Andrew
why dont u remove all your config and try from the beginning
or send ur complete config
or send the debugs atleast
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 4:51 PM
To: [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP
DTR=up RTS=up CTS=up
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
send me the sh int
-Original Message-
From: Andrew
Spid Status
TEI 109, ces = 1, state = 8(established)
Terminal Endpoint Identifier (TEI) number and state. Valid dynamic TEI
assignment range is 64-126.
The most common state values are:
state = 1(terminal down)
state = 3(await establishment)
state = 5(init)
state = 6(not initialized)
state
what u cannot dial u are already connected?
can u send the config
-Original Message-
From: SH Wesson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 5:18 PM
To: [EMAIL PROTECTED]
Subject: BRI state [7:12802]
I have a question regarding BRI state. The following is a capture
i checked the last 2 candidates
CCIE Verification Tool
No, I'm sorry, Dave Mack is not CCIE number 6963. To receive a positive
verification, you will need to enter in the CCIE's name exactly as it is in
the CCIE database. For example, if the CCIE's first name is Dan, you may
also want to try
Static Routes
ip route 0.0.0.0 0.0.0.0 Dialer
-Original Message-
From: Technosys [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 6:02 PM
To: Farhan Ahmed
Subject: Re: Error in configuring ISDN [7:12611]
Hi Farhan ,
Enclosed please find the details of the current config
.
Thank you,
MikeN
Farhan Ahmed wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
just put
access-list acl_in deny tcp any any
access-list acl_in deny udp any any
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq www
access-list acl_in permit tcp 172.100.0.1 255
get a iis server redirect to some server which ll be down and customize the
error page
-Original Message-
From: Nabil Fares [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 1:19 AM
To: [EMAIL PROTECTED]
Subject: DNS and Firewalls [7:12547]
Greetings all,
Looking for methods to
outbound 10 deny 0 0 icqport tcp
apply (inside) 10 outgoing_src
-Original Message-
From: Makis
To: [EMAIL PROTECTED]
Sent: 7/17/01 12:13 PM
Subject: Block Icq With Pix Firewall [7:12601]
Hi
How can i block Icq through Pix Firewall ?
Any ideas ?
Makis
Message Posted at:
when u configure the dynamic nat
users will start connecting
i dont know what u done with the config
send me the config
to block some port
u need
for static mapping
static (inside,outside) 204.31.17.4 192.168.3.4 netmask 255.255.255.255
conduit permit tcp host 10.1.1.1 eq smtp any
sorry the correct
u need
for static mapping
static (inside,outside) 204.31.17.4 192.168.3.4 netmask 255.255.255.255
conduit permit tcp host 192.168.3.4 eq smtp any
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 1:46 PM
To: [EMAIL PROTECTED
u r too much wrong
hostname Cisco2620
!
enable password f
!
no ip name-server
!
isdn switch-type basic-net3
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface Dialer 1
description connected to Internet
ip address negotiated
ip nat outside
no ip split-horizon
encapsulation ppp
do u wana connect ciso to pix via vpn?
-Original Message-
From: RAJESH AGNIHOTRI [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 3:08 PM
To: [EMAIL PROTECTED]
Subject: sample config on PIX AND VPN ON CISCO [7:12618]
Greetings ,
Can u please send me the sample config on PIX
NV Ram or TFTP server
-Original Message-
From: Radford Dion [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 4:54 PM
To: [EMAIL PROTECTED]
Subject: VTP config on 3548 [7:12629]
Im trying to configure VTP on a 3548 switch, but when its asking me to
provide a file of vtp
first of all in basic net3 u dont need spids
and the second u dont have a ip assigned to your bri neither you are using
esy ip there is no dialer as well
what happen to u guys
-Original Message-
From: Danner, John (ZoomTown) [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001
get a cross over cable from ebay.com
-Original Message-
From: Chris Headings [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:05 PM
To: [EMAIL PROTECTED]
Subject: WIC to WIC Connection [7:12668]
Hello allsetting up a small lab w/2 2621's. Would like to create a
WAN cable
Message-
From: Magdy H. Ibrahim [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 7:23 PM
To: Farhan Ahmed
Subject: Re: PIX 506 hang up [1:5132]
Assalamo Alikom Farhan,
Thanx in advance to your help..
Kindly find attached file which contained the output of sh tech ...
Awaiting
no
-Original Message-
From: SH Wesson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:47 PM
To: [EMAIL PROTECTED]
Subject: DLCI [7:12679]
Can we have two DLCI having the same number on the same router but point to
different destinations on different interfaces?
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 9:27 PM
To: 'Farhan Ahmed'; '[EMAIL PROTECTED]'
Subject: RE: Error in configuring ISDN [7:12611]
The Switch type as defined under the interface is Basic-ni. According to
http://www.cisco.com/warp/public/129/bri_invalid_spid.html this switch type
communicating on the same connection.
-Original Message-
From: NP-BASS LEON [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 9:32 PM
To: 'Farhan Ahmed'; [EMAIL PROTECTED]
Subject: RE: DLCI [7:12679]
OKAY, I THINK WE NEED TO GET THIS STRAIGHT, I HAVE A YES AND A NO
WRITTEN EARLIER
. It is using legacy
configuration.
-Ejay
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 11:26 AM
To: [EMAIL PROTECTED]
Subject: RE: Error in configuring ISDN [7:12611]
first of all in basic net3 u dont need spids
and the second u dont have
just put
access-list acl_in deny tcp any any
access-list acl_in deny udp any any
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq www
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq smtp
access-list acl_in permit tcp 172.100.0.1 255.255.0.0 any eq ftp
access-group acl_in
Changing IP Information
You can assign and change the IP information of your switch in the following
ways:
Using the setup program, as described in the release notes
Manually assigning an IP address, as described in this section
Using Dynamic Host Configuration Protocol (DHCP)-based
How to Change Terminal Server's Listening Port
The information in this article applies to:
Microsoft Windows NT Server version 4.0, Terminal Server Edition
Microsoft Windows 2000 Advanced Server
Microsoft
send me the exact error
debug
-Original Message-
From: Vyacheslav Luschinsky [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 3:06 PM
To: [EMAIL PROTECTED]
Subject: IPSec problem [7:12463]
I have a very strange problem with IPSec, namely with ISAKMP. When it is
time for next key
i would say if u wana overcome this problem in short time
make the tunnel again
-Original Message-
From: Luschinsky Slava [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 3:54 PM
To: Farhan Ahmed
Subject: RE: IPSec problem [7:12463]
I try to establish tunnel between two routers
are
renegotiated
i would say if u wana overcome this problem in short time
make the tunnel again
-Original Message-
From: Luschinsky Slava [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 3:54 PM
To: Farhan Ahmed
Subject: RE: IPSec problem [7:12463]
I try to establish tunnel between two
this is too ugly
i just try
http://192.168.5.1/level/29/exec/
on my 2503
and i m in
ha
-Original Message-
From: Oke Oyebanji [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 4:38 PM
To: [EMAIL PROTECTED]
Subject: Alert: HTTP bug makes nearly all Cisco routers vulnerable
[7:12471]
are u getting the answer of access server or no
is it stays on verifying password or ur router doesnt dial at all
check your modem chat script at 56k.com
send me
debug ppp negotiation
-Original Message-
From: No Data [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 8:33 PM
To:
while 56k.com says ATF1 should be
fine. Maybe that narrows down the problem Im having.
Ben
--- Farhan Ahmed wrote:
are u getting the answer of access server or no
is it stays on verifying password or ur router
doesnt dial at all
check your modem chat script at 56k.com
send me
debug ppp
i it working or not
what u want to allow disallow forget this1
-Original Message-
From: Robert Fowler [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 16, 2001 11:05 PM
To: [EMAIL PROTECTED]
Subject: Access List problem. [7:12525]
Someone sent me this and I just can't figure it out. I've
wrong dialer load threshold is for bringing up the second link
u can put maximum numb on idle time out or use fast idle command
-Original Message-
From: Vette Boy [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 15, 2001 8:18 PM
To: [EMAIL PROTECTED]
Subject: Re: dialer idle-timeout
lets say i have 64k connection on both ends
if i built up a vpn what will be the speed of the tunnel
any thoughts?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=12419t=12419
--
FAQ, list archives, and subscription info:
service timestamps debug uptime
service timestamps log uptime
service password-encryption
no service tcp-small-servers
no service udp-small-servers
!
hostname Cisco801
!
enable password a
!
no ip name-server
!
isdn switch-type basic-net3
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface
u can put a access list if u want?
-Original Message-
From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 1:48 PM
To: [EMAIL PROTECTED]
Subject: RE: Routing polices [7:11896]
What do you want us to do for you? Firstly go onto the CCO and read about
do u want the spokes to come inside and access or what i didnt understand
sorry
-Original Message-
From: Tony Medeiros [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 11, 2001 12:33 PM
To: [EMAIL PROTECTED]
Subject: Re: Pix not routing for Frame Spokes [7:11860]
PIX's ( and most
1st one
-Original Message-
From: Wilson, Christian [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 09, 2001 5:43 PM
To: [EMAIL PROTECTED]
Subject: IP helper addresses [7:11434]
If I enter two ip helper address statements referencing two different IP
addresses in my router configs, which
__
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one Place.
http://shopping.yahoo.com/
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
101 - 165 of 165 matches
Mail list logo