I'm scheduled to take the CCIE RS lab on 9/15. I would like to exchange
with any later lab date. Please contact me asap if you're interested in
swapping the lab date.
James Pham
Network Engineer
MAINTECH
714-283-7358 (Work)
714-401-1435 (Mobil)
Message Posted at:
http://www.groupstudy.com
to support PPTP in gateway mode for
a LAN to LAN VPN but that terminology doesn't seem to sit that well on the
Cisco site.
Any advice gratefully received, thanks, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=74428t=74428
on the status page while connecting, even though isakmp
nat-traversal is enabled. An ethereal capture shows the client sending ESP
packets to the PIX but none are coming back.
Please, if anyone has any ideas I would love to hear them. This has been
driving me crazy!
Thanks,
James Willard
[EMAIL PROTECTED
Assume that you have a two routers between your host and dhcp server.
This means that you have a 4 interfaces you cna put ip helper-address on.
On which interface(s) you will put the above command.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=73533t=73533
Here are some tcp questions:
1.Can the sender send more than the window size?
2.Can receiver send ack before whole window comes in?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=73518t=73518
--
**Please support GroupStudy by
All the time. It is our standard to run udld in agressive mode.
Jim
-Original Message-
From: Lopez, Robert [mailto:[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 10:00 AM
To: [EMAIL PROTECTED]
Subject: udld [7:73730]
Anyone out there make it a common practice to implement UDLD on Cat
Hey,
Looking for CCIE study partner(s) in northern Massachusetts and/or southern
New
Hampshire.
Please contact me offline.
Thanks,
Jim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=73360t=73360
--
**Please support GroupStudy
Hey,
Looking for CCIE study partner(s) in northern Massachusetts and/or southern
New
Hampshire.
Please contact me offline.
Thanks,
Jim
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
Message Posted at:
Dave,
Blade 3 is bad. Open a TAC case, if you have support, and get the blade
replaced.
Jim
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 3:49 PM
To: [EMAIL PROTECTED]
Subject: 6500 10/100 line card COIL numbering [7:73194]
Hi,
I have a
That is only $2118.51 a month?
-Original Message-
From: afshin mehrpouya [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 24, 2003 1:24 AM
To: [EMAIL PROTECTED]
Subject: CCIE required in UAE. [7:72879]
CCIE required in UAE-Dubai for an international solution provider company.
Min salary
I'm not entirely certain SuperStack III's can be managed in this fashion?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=72795t=72654
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
This is the way I did it. My own humble opinion is that this way scales down
in the degree of difficulty, hardest first, easiest last, and the order
seemed to sit nicely in terms of what you learned serving you well for the
next exam and so on.
James.
Nakul Malik wrote:
I would recommend
to relate quite often to the senders address, not sure why but it does.
James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=72400t=72397
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Paul,
Can we help you out with this great service you are providing to us by
making a
small donation?
I know I'm not alone when I say that your service has been invaluable to us
in
the Ciscos of the world.
Thanks,
Jim
-Original Message-
From: Paul Borghese [mailto:[EMAIL PROTECTED]
I think the books of ciscopress are very very good!
Such as (Teara, Paquette, Cisco Press) (Webb, Cisco Press) (Paquet,
Cisco Press) (Chappell, Farkas, Cisco Press).
And this four books are basic and important!Then U can read the other four
books of sybex.U also can find the better exam guide
I have read Routing and Switching Written Exam (350-001)Study Suggestions.
This item is on the list---ITM from the Cisco Connection Training CD
(DOC-CCTCD) Order ITM online.will U tell me the mean of ITM?Thank you
very much!!!
Message Posted at:
Sounds strange! Are the users on the 2924 on a different subnet? Perhaps it
is related to permissions for those clients? Or the installation of the
Winsock Proxy client? Would the LAT be incorrect due to any changes on the
LAN?
Just some suggestions to throw at you...
James.
Message Posted
Just the same as the subject,anyone who know it please tell!Thank u!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=71143t=71143
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
quality. Anyway, Sprint is
pretty good about not letting their backbone get too congested before
building out, so the cause of problems is going to be traffic getting
jammed up on your T1 between yourself and Sprint and not the Sprint
backbone itself.
James
-Original Message-
From: [EMAIL
Sounds like a great deal!!
Sales wrote:
Surely you are joking right? There are plenty of labs out
there that
rent rack time for as little as $3/hr.
Ian
www.ccie4u.com
Rack Rentals and Lab Scenarios
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Few months is enough time to get your CCNP, depending where you stand with
understanding the technology and hands on.
Don't waste your time with CCNA.
Just my 2 cents.
Jim
-Original Message-
From: Steve Smith [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 10, 2003 11:12 AM
To: [EMAIL
Hi,
Can you post the out of 'sh proc mem'?
Thanks,
_
Jim Walker
Network Engineer
(617) 732-8803
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 10, 2003 11:29 AM
To: [EMAIL PROTECTED]
Subject: No
Hi,
I've been following this discussion about the Certs vs. a College Degree and
I'd like to just add something that people should really think hard about
before they choose between the two, and share some of my own observations
working in the current IT industry.
I don't know if everyone is
I had it on a Cisco 700 series router before, I know it's different but just
thought I'd mention it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69888t=69850
--
FAQ, list archives, and subscription info:
Robert/Nikolai, thanks for the suggestions, I think one of my problems with
going down that route will be that this telco (British Telecom) just hold
their hands up when you even say the word 'router' and say Nothing to do
with us mate, our end to end test shows total connectivity up to our
I will be interested to see the answers of others to this too. My guess is
many will tell you to 'go for it'. I'm in a similar position in that I am
beginning to get the offer of interviews for senior(ish) roles and am a CCNP
with minimal 'real' experience so am a little nervous about being 'found
Dear all,
Thank you all for your help and suggestions. Unfortunately when this line
went down I lost connectivity (because my company are a bunch of
tight-fisted *7^%$£ who rejected my suggestion of getting an ISDN card for
the 1721 to act as back-up in the event of the leased line dropping) to
that it is their problem?
The config of these routers is really simple by the way, 1 x Ethernet
Interface, 1 x Serial (WIC) interface, static route, encapsulation ppp, no
chap/pap, that's about it!
Thanks, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69573t=69573
No, you need to buy a hardware ISDN simulator/emulator. And they aren't
cheap!!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=69578t=69540
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
For the routing and switching exams I read both the Sybex and Cisco press
books and found the Cisco press books to be better on both occasions. That
said I've also heard people whose opinions I respect vouch for Sybex so I
suppose it's a matter of what works for you!
Dave Jacoby wrote:
From
Dave,
If I press the 'loopback' button on the DSU itself then the router
recognises this and shows Interface up, line protocol down (looped).
Strange thing I noticed is that if I chance encapsulation to HDLC and press
the local loopback button on the DSU I get Interface up, line protocol up
Hi John,
This a cut from my running-config, I have ppp encapsulation specified, why
are the calls HDLC framed?
interface Ethernet0
ip address 192.168.10.21 255.255.255.0
!
interface BRI0
ip address 192.168.11.1 255.255.255.0
encapsulation ppp
dialer map ip 192.168.11.2 name RouterB
as I don't have to on the Cisco 3000
routers (IOS 12.0) I have at home but on these (1721's with IOS 12.2) I did!
Regards, James.
Priscilla Oppenheimer wrote:
James Gosnold wrote:
Hi, this seemed to do the trick, thanks.
What worked? You got lots of suggestions.
If you press the Quote
Show PPP mulitlink says there are no active bundles.
I tried debug isdn q931 and this is what I got:
RouterA#debug isdn q931
ISDN Q931 packets debugging is on
RouterA#
8w3d: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 70 changed to up
8w3d: %LINK-3-UPDOWN: Interface BRI0:1, changed state to
I took it 2 weeks ago, passing score was 706 and I scored 800. Need to know
your ISDN and Frame Relay pretty well.John McCartney wrote:
Passing score is 760, took it last Dec, its a bear, took it
2X's. Studyup on protocols. HTH's
Message Posted at:
Interesting advice, I take my last (hopefully!) CCNP exam next Saturday. I
need a rest, have gone through the CCNA then straight into the CCNP path in
9 months having had no prior experience on Cisco technologies.
I am hoping the CCNP will now get me a chance to work in a Cisco shop where
I can
Tim, If you're in London, Netlogic Consulting are the cheapest I think.
www.netlogicconsulting.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66918t=66825
--
FAQ, list archives, and subscription info:
Hi, this seemed to do the trick, thanks.
Just found it confusing as having gone through the various CCNA literature
it seems to ram home that all you need enter is the 'terminal monitor'
command and then debug what you need.
This works on my home routers IOS 12.0 on Cisco 3000 but not on these
bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
Configuration register is 0x102
Thanks for any advice, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66867t=66867
Actually, while I'm after some advice :-) another thing that confues me
about these ISDN 801 routers is that I have 2 x B channels up but I don't
have PPP multilink configured.
RouterA#show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN
' was sufficient?
Regards, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=66762t=66762
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Hi Robert,
This is what I have.
Router#show log
Syslog logging: enabled (0 messages dropped, 0 messages rate-l
Console logging: level debugging, 413770 messages logged
Monitor logging: level debugging, 285 messages logged
Logging to: vty6(0)
Buffer logging: disabled
?
Confused from London
Regards, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=65926t=65926
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Ok, I think I have it now. So in a way the pool of addresses are like a load
of virtual interfaces?
I understand the use of sockets for overloading and how this can enable to
use just one address, it was just the pool thing that confused me a little!
Thanks guys, James.
Message Posted at:
http
.
access-list 101 deny ip ip address any
access-list 101 permit ip any any
access-list 102 deny ip ip address any
access-list 102 permit ip any any
Thanks for your help.
Naomi James
Computer Services and Information Technology
Savannah State University
912-356-2509
Excellent, thanks Priscilla.
Can you configure a router to be a bridge AND a router?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=64607t=64516
--
FAQ, list archives, and subscription info:
'Spanning Tree
Keepalives'. Now I thought Spanning Tree was a Layer 2 technology designed
to prevent loops on bridges and switches and therefore wouldn't cross a
router anyway? Anybody care to shed any light?
Thanks, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=64516t=64516
Simon, I bought an adaptor from Maplin Electronics in the UK
(www.maplin.co.uk) or you can also try Farnell Electronics
(www.farnell.co.uk), if you call them and explain what you need they are
quite helpful. It's quite good because the adaptors take 2 of the US plugs.
Message Posted at:
Dave,
Satellite is not DSL and DSL is not satellite. I think that was a typo. :)
I have a Direcway Satellite System and the ONLY WAY I got the VPN to work is
1. Not launching the VPN from the computer that is directly connected to the
satellite rcvr/trans box, because it does not work!!!
I think it's
set cgmp enable - If it's set-based switch
Or
ip cgmp - if it's IOS.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=64253t=64240
--
FAQ, list archives, and subscription info:
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=64254t=64240
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
(watch the line wrap)
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
K A
Sent: Tuesday, February 25, 2003 11:05 PM
To: [EMAIL PROTECTED]
Subject: Voice degradation problem in Cisco VoIP network [7:63823]
Hi,
I am getting
Hi,
I'm looking for a study partner for CCIE RS lab.
I leave in NH but work in Boston.
Please contact me off line.
Thanks,
Jim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=63367t=63367
--
FAQ, list archives, and subscription
I have seen this problem before.
Basically you have a layer 1 problem thus, your fiber.
Some possible problems to look at:
1. Is your fiber longer than IEEE standard?
With GBIC-SX, 550m for multi-mode
With GBIC-LH, 300m for multi-mode
With GBIC-LH with modal cable, 550m for multi-mode
With
Only problem is which side are you pinging
-Original Message-
From: John Murphy [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 10, 2003 11:15 AM
To: [EMAIL PROTECTED]
Subject: Re: Simple Ip issue (need help) [7:62728]
If you're asking what I think you're asking, then I
Has anyone used the CCIE Lab subscription from NLI? If so, was it useful to
you in studying for the CCIE? Please give me your thoughts on the product.
Naomi James
Computer Services and Information Technology
Savannah State University
912-356-2509
[GroupStudy.com removed an attachment of type
Ok, thanks John, perhaps I won't go overboard on it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61658t=61593
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
So I read last night until my eyes bled, and for what?!!!
Thanks for the info, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61693t=61593
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Check out Zebra (www.zebra.org). It supports RIP, RIPv2, RIPng, OSPF,
IGMP, and BGP4. The interface was designed to be a clone of IOS for most
functions.
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Shane Stockman
Sent
across and it isn't listed under 'exam topics' at:
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/current_exams/640-604.html
Regards, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61593t=61593
--
FAQ, list
for automating tasks and
backing up configs..
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Mr piyush shah
Sent: Wednesday, January 22, 2003 12:23 AM
To: [EMAIL PROTECTED]
Subject: Re: Automatic copying
Have you done a debug interesting packets to see exactly what is causing
your dialer to dial?
James A Eisert (Jad)
HP Managed Services at Agere Systems
Agere Operations Center
610-712-5700
[EMAIL PROTECTED]
-Original Message-
From: neil K. [mailto:[EMAIL PROTECTED]]
Sent: Thursday
that machine have?
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Azhar Teza
Sent: Thursday, January 09, 2003 3:12 PM
To: [EMAIL PROTECTED]
Subject: Broadcast Packet [7:60738]
I have a small network where users have been
for the serial ports. Does anybody know what might be wrong?
Thanks,
James Willard
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60633t=60633
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
was wondering if this was just a configuration issue
somehow.
Thanks,
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 08, 2003 2:34 PM
To: [EMAIL PROTECTED]
Subject: RE: SNMP Status: notPresent(6) [7:60633
the
command on ethernet0. NetBIOS will attempt to resolve names by
broadcast, and the helper address will turn that broadcast into a
unicast towards the IP of the DC you specify in the config. Let me know
how that works.
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED
Here is the situation:
I have a 1700 series router and a T1, a cisco switch, and a file server.
I will no longer run exchage or IIS. How should I configure my router?
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of james.gruggett.vcf]
Message Posted at:
Here is the situation:
I have a 1700 series router and a T1, a cisco switch, and a file server.
I am removing both Exchage and IIS services.
How should I configure my router?
Thanks
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of james.gruggett.vcf]
Message
The file server is running small business server Win2k. The router is
functional, however we recently has a DOS attack. I have removed the
exchange service and IIS from the server.
Thanks
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of james.gruggett.vcf]
Don't use 7 on the password line.
You also need a 'login' command.
Line con 0
Password xxx
login
-Original Message-
From: Richard Campbell [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 30, 2002 12:00 AM
To: [EMAIL PROTECTED]
Subject: why con 0 password doesn't work??
Hi Everyone,
I have a 1700 Cisco router connected to a T1. I would like to lock it
down and only allow port 80 to transmitt data for security purposes.
Any suggestions would be great.
Thanks
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of james.gruggett.vcf]
I was running an exchange server and someone hacked in. I am trying to
secure the network. What do you reccomed?
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of james.gruggett.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=59987t=59975
on setting the boot variable.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
fun_c/fcprt2/fcd205.htm#xtocid2
HTHs,
Mark
-Original Message-
From: Walker, James - Is [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 26, 2002 4:33 PM
To: [EMAIL PROTECTED]
Subject: 4500
All,
Anyone know how to recover from a empty flash on a 4500 series router?
I'm getting the following message:
device does not contain a valid magic number
boot: cannot open bootflash:
an alternate boot helper program is not specified
(monitor variable BOOTLDR is not set)
and unable to
IPX is still there
Passing score is still 849
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=59750t=59636
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
don't I have to use HSRP.
This is my first 3550 setup for L3. Any help will be appreciated.
Naomi James
Computer Services and Information Technology
Savannah State University
912-356-2509
[GroupStudy.com removed an attachment of type image/gif which had a name of
Mabelt.gif]
[GroupStudy.com
This test has multiple case studies and multiple questions per case study.
Yes, you can refer back to the case studies for all the questions.
You will lose average of 3 min. per question as you have to refer back to
the case study.
After spending over an hour on case studies (hint hint), my head
interface Serial2/0
ip address 12.124.201.145 255.255.255.252
-Original Message-
From: Brian Zeitz [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 12, 2002 1:50 PM
To: [EMAIL PROTECTED]
Subject: help [7:59112]
Router Setup
This may be a very simple question, but I set up
I've hit the send button too fast.
Try:
ip default-gateway 12.124.201.145
-Original Message-
From: Walker, James - Is
Sent: Thursday, December 12, 2002 2:15 PM
To: 'Brian Zeitz'; [EMAIL PROTECTED]
Subject: RE: help [7:59112]
Try:
interface Serial2/0
ip address 12.124.201.145
, 2002 2:20 PM
To: [EMAIL PROTECTED]
Subject: RE: help [7:59112]
146 was assigned by the ISP
-Original Message-
From: Walker, James - Is [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 12, 2002 2:15 PM
To: Brian Zeitz; [EMAIL PROTECTED]
Subject: RE: help [7:59112]
Try:
interface
ttt
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=58693t=58633
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
If it is a switched network, flood the IP in question after hours and
look at the switches for the port with all the traffic. If there are no
switches, then you will have to narrow it down to an individual hub and
then look at that group of workstaions. I'm sure there is a more
technical answer
Which books can peopel recommend for this CCIP exam.
I only want to buy one QoS book and one MCast book - spent enough with Cisco
Press for one life time ;)
Any recommendations?
Many thanks
James
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=58633t=58633
well!!!
Thanks to those of you who have answered questions I've had in the last few
weeks and in fact all of you who participate in this forum which is a great
help to those trying to further our professional education.
Regards, James.
Message Posted at:
http://www.groupstudy.com/form/read.php
, it's best to attempt to find the
answer on your own. It will build your own problem solving skills and
you might learn quite a bit more in the process... Just my $0.02
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
puro
I have a friend that has a T1 going into his 1700 series cisco router.
His ISp has stated that someone has hacked into his Win2k server and
that he must put a firewall in place.
Do you reccomend a software or hardware based firewall and what type.
The network consist of 1 server, 1 switch, ans
This is just a hunch, but could you possibly have a high performance VCM
in a non-V3 MC3810 (i.e., MC3810 or MC3810-V)? It will say on the back
of the chassis what type it is. Only the V3 model supports the high
performance VCM, so using one in a non-V3 might cause that error...
James Willard
that using the default tftp server - at least not according
to the man pages. It may be possible to find a third-party TFTP server
that will, or modify the source to one and compile your own if it's a
significant problem.
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED
Hi people,
Sorry, I'm sure this question gets asked 100's of times, I just went back 5
pages and couldn't find an answer.
Anybody know the passign score required for 640-901? I'm sitting it on
Saturday and would like an idea, someone earlier down said the CIT test had
a passing score of
Wow, that's a lot lower than I expected, the CCNA I sat a month ago was 849.
My chances are better than I thought, fingers crossed!
Thanks for the info.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57602t=57599
--
FAQ, list
Took the Written Friday- and failed. Very difficult- Passing score was 58.
Know the exam objectives very well.
To answer an item on question last week. There is still some token ring and
IPX on it.
Boson test#1 was pretty descent, but Caslow, Doyle, and Bruno's books were
all a must.
Message
Jim,
How about Token Ring and IPX. Is there as much emphasis on the RIF and etc
as there used to be. Also- how much VoIP and MPLS should we know.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57437t=57341
--
FAQ, list archives,
it helps :).
James Willard
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody;groupstudy.com] On Behalf Of
HulaJoe
Sent: Thursday, November 14, 2002 3:06 AM
To: [EMAIL PROTECTED]
Subject: MC3810 - VoIP Requirements [7:57426]
Hello All,
I just purchased a 3810
Does anyone have a copy of the 5850 voice/vcware and a good IOS?
Thanks
James
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57065t=57065
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
I am scheduled to take the written next week. I really have questions
concerning MPLS, QoS, MultiCast, VoIP, and IPX. How much preparation into
these areas should I spend? Are there any other areas where I should focus
more than normal?
Any help will be appreciatted,
James
Message Posted
I still find all that criteria preferable to any BGP questions!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56990t=56923
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Well done Symon. Will be sitting my first CCNP exam in the next couple of
weeks.
I didn't realise Priscilla actually had her own books published on
networking? It's excellent that people like that participate on these forums.
Message Posted at:
just me and I had genuine reason to be confused!
Regards, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56877t=56825
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Anyone with more info about the above new exam.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56894t=56894
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
of the following terms for me:
NIC Number
NIC Network Number
Network Boundary (In terms of summarization at the network boundary)
Probably the silliest question you've had on here but my head can't take
anymore!
Thanks, James.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56825t
1 - 100 of 631 matches
Mail list logo