Re: frame-relay switch [7:41899]

rip network 192.1.1.0 Note: Again , Commands to check the frame-relay DLCI maps, and LMI signaling and PVC statuts Show frame pvc show frame map show frame lmi Ping your remote sites Hope this helps Jorge Rodriguez CCNA/CCNP/ CCIE Candidate [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL

Re: frame-relay switch [7:41899]

rip network 192.1.1.0 Note: Again , Commands to check the frame-relay DLCI maps, and LMI signaling and PVC statuts Show frame pvc show frame map show frame lmi Ping your remote sites Hope this helps Jorge Rodriguez CCNA/CCNP/ CCIE Candidate [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL

Re: frame-relay switch [7:41899]

rip network 192.1.1.0 Note: Again , Commands to check the frame-relay DLCI maps, and LMI signaling and PVC statuts Show frame pvc show frame map show frame lmi Ping your remote sites Hope this helps Jorge Rodriguez CCNA/CCNP/ CCIE Candidate [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL

Re: frame-relay switch [7:41899]

rip network 192.1.1.0 Note: Again , Commands to check the frame-relay DLCI maps, and LMI signaling and PVC statuts Show frame pvc show frame map show frame lmi Ping your remote sites Hope this helps Jorge Rodriguez CCNA/CCNP/ CCIE Candidate [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL

Re: Whats the difference between Classful Classless??? [7:41574]

Classfull routing protocol does not advertise and address mask with the advertise destination address, which means that it assumes a defaul mask for the three major address IP classes A,B,C. Classless on the other hand does advertise the mask, which means that it will advertise the mask along

Re: 4006 Power Supplies [7:41257]

I have worked with the catalyst 4006. The 4006 will still operate wiht only one power supply. I have tested it under such conditions with only one power supply, one SUP and four 48 port modules( this is considered a partial populated chasis ), I assume that on a fully populated chasis at

Re: Cisco Memory [7:41266]

www.layer7labs.com www.kg2.com Jorge The Edward Groove wrote: Has anyone done any research on cheaper, yet compatible memory for the 2500 series routers? I'm looking for some cheap flash and DRAM for this line. Does anyone have any specs--or even better--manufacturer model names that

Re: Disable Telnet [7:41293]

remove passwords and login configuration on VTY 0 4 lines. Jorge [EMAIL PROTECTED] [EMAIL PROTECTED] Johnson, Richard (NY Int) wrote: Hi All, How do I disable Telnetting capability to my 3640. I only want console access. Thanks, Rich Message Posted at:

Re: Finding a MAC address [7:38560]

Depending on varios scenarios: Assuming the following: If users worksations are WindowsNT stations and properly configure WINS servers you can simply retreave the MAC address by entering the host IP address at the windowsnt command-line e.g. nbtstat -a ip-address If you have Catalyst

Re: Finding a MAC address [7:38560]

Depending on varios scenarios: Assuming the following: If users worksations are WindowsNT stations and properly configure WINS servers you can simply retreave the MAC address by entering the host IP address at the windowsnt command-line e.g. nbtstat -a ip-address If you have Catalyst

Re: Looking for Cisco components (Routers) - CCIE Lab Setup [7:40734]

Check out these links for labs: www.layer7labs.com www.kg2.com Or contact Ozzi by email at [EMAIL PROTECTED] , he is a cisco instructor as well as cisco-lab reseller. Jorge / CCNA CCNP / CCIE wannabe [EMAIL PROTECTED] [EMAIL PROTECTED] Siva wrote: Hi All I just cleared my ccie

Re: COX Cable and Cisco uBR924 owners [7:40208]

That's something. I am not surprise by the bellow statement. I am a Cox subscriber and since day one I noticed the level of tech support. Cox just don't want to pay intellectual techs that are capable of supporting Cisco cable modems, they just don't have the brains Jorge Cebuano wrote:

Re: Finding a MAC address [7:38560]

PROTECTED]]On Behalf Of jorge rodriguez Sent: Sunday, April 07, 2002 12:07 AM To: [EMAIL PROTECTED] Subject: Re: Finding a MAC address [7:38560] Depending on varios scenarios: Assuming the following: If users worksations are WindowsNT stations and properly configure WINS servers you can simply

Re: Setting the date on a 2900XL [7:39947]

Try this quick settings on global config: (est depending on your timezone location) clock timezone est -5 clock summer-time est recurring (Then point to an NTP public time server close to your timezone ) ( Here are some public NTP servers http://www.eecis.udel.edu/~mills/ntp/clock1.htm )

RE: Protocol numbers

misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-541-4197 Evenings http://www.netwire.n3.net/ http://www.learnci

CCNP Boot Camps

input. Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-541-4197 Evenings http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.com http

2503 Cisco Router

me at [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 Day 1-617-541-4197 Evening iWon.com http://www.iwon.com why wouldn't you

Looking for Networking Job in Velezuela

. I hold eight years experience in computer networking, and one year solid experience with cisco products. Thanks Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-541-4197 Evenings http://www.netwire.n3.net/ http

2503 Cisco Router

in Boston, so I would prefer a Massachusetts buyer, all others are welcome as well. If interested you can contact me at 781-614-1294 or email me at \mail{[EMAIL PROTECTED],[EMAIL PROTECTED]} Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781

Brand New Cisco Router/Sale

Brand New Cisco 2503 Router for sale, never used. Specs 1 AUI-Ethernet 1 BRI WAN Port / Built in ISDN 2 Serial WAN Ports / Frame-relay or Point-to-point 1 Console Port 1 Aux Ports IOS Ver 11.3 8 Megs Flash 10 Megs DRAM Accessories Included One Ethernet-RJ45 AUI Transceiver One Console Cable with

RE: Upgrading to Cisco switches

outing off. Thanks in advance. Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.com

Router / Serial Link Hardware Software compression

compression at both routers serial interfaces to do software compression "stac", to see if the backup time frame would take less than 8 hours. None of the routers have CSA adapters, so the compression will have to be software/CPU based. Anyone have had experience with this ? Thanks Jorge Rodri

RE: Jobs

Check the following webpage for Jobs, www.monster.com Good luck Jorge --Original Message-- From: Stephane Wantou Siantou [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: September 19, 2000 6:10:33 PM GMT Subject: Jobs Ho Everyone, I am about to become CCNP (by the end of the month).

RE: what does becn and fecn high value indicate?

/www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Net

RE: Bring equipments in and out of US

y.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Eve

RE: Net X Ray

ED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 0

RE: Ethernet Collisions

UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston

RE: Can you use the calculator in tests?

ble to use the calculator?? Pedro ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CC

DSL Reports website, check it out

I found this website which has excellent reports on DSL and its providers. Enjoy http://www.dslreports.com/ Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http://www.netwire.n3.net/ http

RE: [No Subject]

I believe it is 750. --Original Message-- From: "Nischal Chandra" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: August 6, 2000 2:20:35 AM GMT Subject: [No Subject] What is the minimum required for pass in the New CCNA 2.0 Thanks Nischal Jorge Rodriguez /CCNA Network

Re: Master Degree?

This replay is for the fellow with so many degrees certs!! Not happy ? Sounds like you picked the wrong career/business !! Hi, I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP, but still not satisfied. I have seen different job postings that required master

Re: Master Degree?

This replay is for the fellow with so many degrees certs!! Not happy ? Sounds like you picked the wrong career/business !! Hi, I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP, but still not satisfied. I have seen different job postings that required master

Re: Master Degree?

This replay is for the fellow with so many degrees certs!! Not happy ? Sounds like you picked the wrong career/business !! Hi, I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP, but still not satisfied. I have seen different job postings that required master

RE: Trouble with 2501

cognise this command and there is no mention of ipx in the help in the exec. Can this router handle ipx and if it can, how? Stuart Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http://www.

Re: Someone clarify this?

done. I completely agree, someone didn't know what they were doing ! --Original Message-- From: "joel.studtmann" [EMAIL PROTECTED] To: Jorge Rodriguez [EMAIL PROTECTED], jeongwoo park [EMAIL PROTECTED], [EMAIL PROTECTED] Sent: July 13, 2000 12:03:04 PM GMT Subject: Re: Someo

RE: setting up a Menu on a 2511

PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Network

RE: How to get the running config of routers using SNMP

address at http://mail.yahoo.com.hk ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA

RE: What causes the following errors on an IGX?

ines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294

Re: dilemma.

ED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 0

RE: dilemma.

/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http:

Re: routername(boot)

What about seting the register to 0x2141, this should work, this register setings is for disater recovery. --Original Message-- From: "Kenny Sallee" [EMAIL PROTECTED] To: Jorge Rodriguez [EMAIL PROTECTED], kenny [EMAIL PROTECTED], [EMAIL PROTECTED] Sent: July 10, 2000 12:08

RE: routername(boot)

it boot up from flash again ?? Thanks ken ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodri

Re: interesting part 2

from functioning properly. i am also looking it up on the cisco web site but if anyone knows the solution first do post it :) Regards Atif Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http://www.netwir

Re: interesting part 2

like that which will prevent it from functioning properly. i am also looking it up on the cisco web site but if anyone knows the solution first do post it :) Regards Atif Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-9

RE: changing startup configs without changing running configs

to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.com http://www.iwon.com wh

RE: Fw: Easy Brain Teaser (Switching)

eport misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CC

RE: TFTP server

.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.

RE: Looking for a job

ED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115

RE: TFTP server

to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst

Re: Cisco 3600 error on startup??

isconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.co

RE: Password recovery on 2503 (IOS 11.2 (16) )

ED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 0

RE: CCNA v1 vs CCNA v2

://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http

RE: Is this true?

ct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.com http://

RE: Retransmissions

"Avarage erros" Avarage Utilization " and so forth, I mostly concern myself with Avarage erros and or collisions. Hope this helps Jorge Rodriguez/CCNA Network Analyst --Original Message-- From: "Will Klein" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Jun

RE: RJ45 RJ48 difference

. The RJ45 is a connector term design for Ethernet Networks where four pair coper are used, the signaling on RJ45 10baseT Ethernet uses only two pairs 1,2,3, and 6. I don't know on top of my head the two pairs signaling specs. Hope this clarifies your question Jorge Rodriguez/CCNA Network Services Analyst

RE: Passed CCNA!

misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.com

RE: Break Keys

the router to enter in rommon ?? Cheers ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CC

RE: 802.1q

ines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614

RE: Last Minute Clarifications (Important )

___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112

T1 Serial Link, Carrier problems ! Need imput

es, 0 output buffers swapped out 17 carrier transitions Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/

Re: T1 Serial Link, Carrier problems ! Need imput

rface resets 0 output buffer failures, 0 output buffers swapped out 17 carrier transitions Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://w

Re: PIX Firewall show connection counters

Did you try " Clear Counters" ? - Original Message - From: "Pete Ruttman (adminpr)" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, May 30, 2000 2:50 PM Subject: Re: PIX Firewall show connection counters Is there any commands to clear the counters on a PIX ? I amtrying to

Re: cat5 utp pinouts

Pin 6 Orange/White Hope this helps Rgrds Jorge Rodriguez /CCNA Network Services Analyst RS Networks Inc 1112 Boylston Street #222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ - Original Message - From: "Justin Marcus&qu

Re: Network test and mesurment - All say

are Lucent Technologies. This is the best I have seen, I have used HP OV hummingbird, and nothing compares to Epro. www.ins.com Jorge Rodriguez /CCNA Network Services Analyst RS Networks Inc 1112 Boylston Street #222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3

Re: CCIE BootCamp

Try www.cciebootcamp.com Jorge Rodriguez /CCNA Network Services Analyst RS Networks Inc 1112 Boylston Street #222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent

Re: Frame vs PPP

Point-to-Point DS3 alouds more security. That is, from the telephone carrier providing the T3 pipe to the custumer will not be shared by others. In other words, the DS3 from the SONET card/module data traffic going through it will be for that cutomer only. This could be one reason ! -

Re: Hi all.

roup is also a great start. Another excellent site is www.ciscoinanutshell.com this on is awesome . Good luck Jorge Rodriguez /CCNA Network Services Analyst RS Networks Inc 1112 Boylston Street #222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ http://www.learncisco.n3.net/ --

Re: routing protocol

Try www.netsys.com go to technical library . You can find TCP/UDP port numbers by protocol Jorge Rodriguez /CCNANetwork Services AnalystRS Networks Inc1112 Boylston Street #222Boston, MA 021151-781-614-1294http://www.netwire.n3.net/http://www.learncisco.n3.net/ - Original

Re: cannot ping over frame relay

ing Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115

RE: Bandwith Tool or Software

://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst RS Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 http://www.netwire.n3.net/ iWon.com

Looking to trade Ciscoware / Phone correction

I am looking for the following to trade: I need 1)RouterSim CCNA network server version 2.0 - 1 installation 2)CCDA Courseware Library I have to trade: 1)CiscoWorks2000/Resource Manager Essentials Version: 2.2/Latest version 2)From TCT (Advanced Cisco Router Configuration ) Jorge