We are back up now. We were hit with the electrical Blackout.
Marc Russell
www.ccbootcamp.com (Cisco Training)
""Leon Zhao"" wrote in message
news:[EMAIL PROTECTED]
> anyone know why? Thanks.
>
> Regards,
> Leon
> **Please support GroupStudy by purchasin
Try this. Watch the word wrap. "Dialer watch"
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuratio
n_guide_chapter09186a00800872ed.html
Marc Russell
www.ccbootcamp.com (Cisco training)
""Kenan Ahmed Siddiqi"" wrote in message
news:[EMAI
Put Smartnet on it and get a CCO account and then download it from
www.cisco.com
Marc Russell
www.ccbootcamp.com
""Amir Tahir"" wrote in message
news:[EMAIL PROTECTED]
> Hi,
> I will be thankful to you if you could let me know from where i can
download
> IOS v
have
suggested this to Paul several times in the past.
Just my two cents.
I used to post on this site all the time, but since I now get filtered all
the time I haven't done so in quite some time.
Marc Russell
""The Long and Winding Road"" wrote in
message [EMAIL PRO
Is your flash read-only? If so just change the config reg and reboot.
Marc Russell
""Chuck's Long Road"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I've done this before, and it's not like it's real tough, but.
&g
Check to be sure, but I think it is the same as 2500 flash. I'm sure you can
find someone who would donate one. If not send me an envelope with postage
and your return address and I will give you one.
Marc Russell
www.ccbootcamp.com
""Kelly Cobean"" wrote in mess
no partition flash 2 8 8
Marc Russell
""Robert D. Cluett"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> All,
>
> Am I reading this correctly? Is this stating that I do have 16MB Flash /
> 16MB DRAM but need to unpartition the fla
Double check your work and compare against our configs. I'm working on
version 3.00 of Lab#8 right now and the route tables for the three routers
you mentioned, R6, R8, and R1 are listed below.
If you contact me in the very near future I may allow you to access the rack
I'm working on for the new
You have the lmi-type set wrong on the switch-to-switch connection. It
should be "frame lmi-type q933a "
See the link below for more info on frame relay.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan
_c/wcffrely.htm#11076
Marc Russell
Network Learning,
Give us a call. 248-299-8114
Marc Russell
NLI
""Robert Raver"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hey ,
> My CD-Rom in the NLI's CCIE R&S Written Exam book is missing. Is there
> anyone on the list could creat
One ATM Switch, a Cisco LS1010 is best, but you can get by with others. You
will also need two routers, 3640 or 3620 with ATM interfaces.
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com (Cisco Training)
www.@!#$.com (Cisco R&S
tftpdnld
You will have to set the variables first, but the command above will give
you the syntax.
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com (Cisco Training)
www.routerie.com (Cisco R&S CCIE Discussion gr
Sub-Hw
--- - -- --
1 EARL 1+ WS-F5511 0006809542 1.0
Console> (enable)
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com (Cisco Training)
www.routerie.com (Cisco R&S CCIE Discussion groups)
www.security
Our new 1-day labs 1-22 use the same physical topology except for labs 7 and
12.
""Al Walter"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I'm ready for some lab scenarios, but can't decide between CCBootcamp.com
or
>
> IPExpert.net. I'm leaning towards the lab
Use CAR comitted access rate
Marc Russell
www.ccbootcamp.com
""Fernando Shiran"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> I do have a requirment to limit Internet Bandwidth among few sites. I do
> have a T1 and want to
Use dialer watch and have the backup kick in when the route disappears.
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com
http://www.ccbootcamp.com/quicklinks.html
wrote in message
[EMAIL PROTECTED]">news:[EMAIL P
Your layer-3 device doesn't have a route back to the 64.114.57.8 /29 network
to return traffic back to IP adddress 64.114.57.10.
Also, when you troubleshoot what looks easy I always turn on ip classless so
you don't deal those issues. I think 12.0 IOS and up has it on by default
no
If I remember correctly you can use a 3640 with a NM-4T, but if you run at
8Mbps you can only use the one port on the 4-port card.
Marc Russell
www.ccbootcamp.com
""suaveguru"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hi all
>
>
Layer 2 on the Catalyst 5000, but you may have to trunk with an external
router and route VLANs.
Marc Russell
www.ccbootcamp.com
""Firesox"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Do they have Cat5K with L3 functionality on CCIE
terface
comamnd.
In addition, the summary address command doesn't summarize anything in this
case.
Maybe I'm just consfused. Can you post configs and route tables from both
routers?
Marc Russell
www.ccbootcamp.com
""Raymond Cai"" wrote in message
[EMAIL PROTECTED]
Yes, it does make simple tasks a little more complicated. However, using
inverse masking can make complex tasks much easier.
Take this issue. Say you are asked to filter access to all odd 192.168.x.0
/24 routes.
Your method.
192.168.1.0 255.255.255.0
192.168.3.0 255.255.255.0
192.168.5.0 255.2
erial interface to router R2 serial interface on the same IP
network.
Marc Russell
www.ccbootcamp.com
-Original Message-
From: Brian Whalen
To: Marc Russell
Cc: [EMAIL PROTECTED]
Sent: 12/30/01 1:26 AM
Subject: Re: Half Successfull ping [7:30449]
I have seen this behavior when ther
rk address
translation) to convert your internal IP addresses to external ones that are
known by your ISP.
Look on www.cisco.com for sample NAT configs and you will get the idea.
Marc Russell
www.ccbootcamp.com
""John Mairs"" wrote in message
[EMAIL PROTECTED]">news
icmp any any.
Marc Russell
www.ccbootcamp.com
""McHugh Randy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Anyone have an ideas on this half successfull ping across two directly
> connect serial interfaces? Clock rate, encapsulation, control
Here is what we use and it is a low cost solution.
http://www.tribecaexpress.com/ipswitch/whatsup.htm
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com
""2387"" wrote in message
[EMAIL PROTECTED]&qu
>o/r0x42
>i (use to reload)
After you clear the config don't forget to change the config register back
to 0x2102.
router(config)#config-register 0x2102
Marc Russell
www.ccbootcamp.com
""michael kisiel"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL
can be much more complicated, but this is the
basic config.
Marc Russell
www.ccbootcamp.com
""Slava Kosoy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can you pus something concrete in?
> Thank you.
>
>
>
> ""Chuck Larr
en use CCO or maybe the free labs at
fatkid.
Any more posts like this will result in legal actions. Both civil and
criminal.
Marc Russell
www.ccbootcamp.com
""screw bootcamp"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Marc,
>
> If you
future. You can thank the individual that posted this
message for this change in policy.
Marc Russell
www.ccbootcamp.com
""screw bootcamp"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> How would you like a set of bootcamp labs free?
>
&
the most
important aspect of CCIE preparation.
Marc Russell
www.ccbootcamp.com
Final-Recipient: rfc822;[EMAIL PROTECTED]
Action: failed
Status: 5.0.0
Diagnostic-Code: smtp;554 delivery error: dd This user doesn't have a
yahoo.com
account ([EMAIL PROTECTED]) - mta416.mail.yahoo.com
50-8BI
www.ccbootcamp.com or www.netcginc.com
Marc Russell
www.ccbootcamp.com
""Curtis Phillips"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone know where there things can be obtained?
>
> Regards,
>
> Curtis
> - Orig
f different manufacturers. We
are no different.
Marc Russell CEO
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com
[EMAIL PROTECTED]
""Jason"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
You can do what you want by setting the privilege on the users and the
commands you desire. No external server required.
Marc Russell
www.ccbootcamp.com
""IT Guy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi guys,
>
> Need your hel
We offer a variety of services. Please spend some time reading through our
site or give us a call.
We offer a 5-day Instructor led class that may be what you are looking for.
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Work PH# 248-299-8114
Fax# 248-299-7975
I would recommend the routers below as a minimum setup.
(1) 2511
(2) 2503
(2) 2513
(1) 2520
(2) 2501
(1) ISDN simulator
(1) Cat 2901 with CatOS 4.5 code
Some of the router should have 16 Dram and 16 Flash
Marc Russell
www.ccbootcamp.com
""XYZ"" wrote in message
[EM
10.44.0.0 0.0.255.255
route-map 10 permit 10
match ip address 101
set ip next-hop 10.10.1.1
Marc Russell
www.ccbootcamp.com
""Cisco Lover"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Guys,
>
> Can any one explain How to set up
It is charged by call. So if you have 2 calls (2-b channels used) then you
get charged for each call.
Marc Russell
www.ccbootcamp.com
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello Group,
> I have querry about ISDN lines.
> As you know that it consist
I would hard code the speed and duplex settings on the switch and the end
device if possible. I have seen this before.
Marc Russell
www.ccbootcamp.com
""pat"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Has anybody seen a problem wherein eth
101 permit icmp any 210.145.3.128 0.0.0.63 ttl-exceeded
access-list 101 deny ip any any log
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Work PH# 248-299-8114
Fax# 248-299-7975
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL PROTECT
www.optsys.net
""cisco-commando boy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> not sure if i should be posting this here, but im after token ring maus,
> (rj45) and media filters (for the old db9 plugs),
>
> any one have any for sale (in the UK), but will cons
Reselling our lab subscription is a violation of our subscription license
and is illegal.
Please refrain from this illegal activity.
Thanks.
Marc Russell
""eFamily"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I have the
You don't need a routing protocol to ping a directly connected neighbor ip
address on the same subnet. Inverse arp should of taken care of the layer-2
to layer-3 mapping. As for your own interface add a frame map command for
your own interface and it will work.
Marc Russell
www.ccbootcam
Add the broadcast command to your dialer map.
Marc Russell
www.ccbootcamp.com
""Davide Ferrari"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all..
> Strange problem two router having a ISDN (bri) and a FR
connection
> form
I would use the bandwidth comand to alter to EIGRP route selection metrics.
Use a lower number on the backup routes.
Marc Russell
www.ccbootcamp.com
""Jeongwoo Park"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all
> We have Fr
I would shoot for at least a total of 7 routers with an ISDN sim. Just rent
rack time for the rest.
Marc Russell
www.ccbootcamp.com
""Jeremiah Wegernoski"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everyone:
>
> Right now in my
It can't be done. You need an ISDN simulator or an ISDN switch.
""sami natour"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all ,
> Can I connect two routers back to back using BRI0 S/T
> what is the required pin assignment for the cable ?
> what is the required configura
Yes, they have the same command set as the 5000s. We use 2901s in our 5-day
CCIE class.
Marc Russell
www.ccbootcamp.com
""Stephen Flint"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> Would someone respond to my questio
This switch/router doesn't support policy routing yet. We have already been
down this road with one of our customers.
Marc Russell
www.ccbootcamp.com
""Engelhard M. Labiro"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi group,
> I
you their input.
Marc Russell
President
Network Learning, Inc.
www.ccbootcamp.com
[EMAIL PROTECTED]
""Yhladi Ghfaskovich"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am looking to start my CCIE study and have done some research on
practi
We have some Cisco specific ones at http://www.ccbootcamp.com/download/
""Swapnil"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> please suggest me some links for voice over ip presentation and white
papers.
>
> swapnil
>
> _
CRB allows to bridge and route a particular routed protocol, but not between
the bridged and routed domains.
IRB allows you to route from the bridged domain to the routed domain using a
BVI interface.
Marc Russell
www.ccbootcamp.com
""Burnham, Chris"" wrote in message
[EM
The Olicom 8600 is the same switch.
Neil Schneider wrote:
> The cisco CCIE lab includes the 3900 series token ring switch. What other
> switches use the same OS? Hoping to pick something up for cheap.
>
> Neil
--
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills,
You may want to check out our site www.ccbootcamp.com
We will soon be offering a 5-day CCIE Boot Camp class that runs from 9a-9p
and includes 14 days (5 days during the class) of telnet access back to the
rack you used in class. Info will be posted on our site shortly.
Marc Russell
Network
FYI for our subscription customers. Lab 19 is complete.
Lab 19 contains IP, OSPF, EIGRP, BGP, IPX, ISDN, VLANs, ATM, and DLSW.
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Work PH# 248-299-8114
Fax# 248-299-7975
Pager# 810-681-0382
Alpha Page (don't put te
We are biased, but check out www.ccbootcamp.com
Here are several dozen reviews http://www.ccbootcamp.com/reviews.htm
Marc Russell
CCIE Boot Camp
www.ccbootcamp.com
""Waters, Kris - TS/Corporate"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[
x27;t apply to you, but I have
already had several customers that didn't get or open my e-mail announcement
on this. Many of you on this list rent time on our remote racks.
Marc Russell
Network Learning, Inc.
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 248-620-9603
Fax# 248-620-9650
Page
18
Lab 18 was just released.
Marc Russell
Network Learning, Inc.
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 248-620-9603
Fax# 248-620-9650
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL PROTECTED]
E-Mail CCIE Boot Camp [EMAIL PROTECTED]
WEB CCIE Boot
Load it up in Cisco Native IOS mode and then configure as a normal router.
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 248-620-9603
Fax# 248-620-9650
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL PROTECT
This may be more info than you want, but here is some info I've put togther
that I plan on using in one of our training classes.
Cisco 6500 Series MSFC Native IOS Layer 3 Switching
This concept blends switching and routing into one platform. The Native IOS
mode on this platform allows the s
The AGS+ works fine as a frame switch. We used to have a couple in our
remote racks.
Marc Russell
CCIE Boot Camp
www.ccbootcamp.com
"Brian" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> On Thu, 19 Oct 2000, Ashfaq
See www.ccbootcamp.com for info.
""Jacques Allison"" <[EMAIL PROTECTED]> wrote in message
8smctp$tbe$[EMAIL PROTECTED]">news:8smctp$tbe$[EMAIL PROTECTED]...
>
> Hi All,
>
> I would like more information on the CCIE lab (R&S). If anyone has
> attempted/completed the lab, can you please tell me
You need to know token-ring for the lab. The questions are moving more
towards DLSW. However, they recently added a 3920 token-ring switch to the
mix.
Marc Russell
CCIE Boot Camp
www.ccbootcamp.com
""Jack Walker"" <[EMAIL PROTECTED]> wrote in message
8sfvv6$7j0$[EMA
If history repeats itself, the answer is none. For example, a Cisco 2501
16/8 has been worth 875.00 to 1000.00 for several years now.
Marc Russell
CCIE Boot Camp
www.ccbootcamp.com
""Sean Lee"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">
www.ccbootcamp.com
""Bruce"" <[EMAIL PROTECTED]> wrote in message
8peea1$rb5$[EMAIL PROTECTED]">news:8peea1$rb5$[EMAIL PROTECTED]...
> Does anyone know where I can do virtual labs with ATM scenarios. I did not
> see any on Mentorlabs or some of the others. I would appreciate any
advice.
> I have
Have you consider buying used gear?
Marc Russell
CCIE Boot Camp
www.ccbootcamp.com
""Glenn Johnson"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> sorry if off topic --
>
> I'm looking at buying some
The IP packet operates at layer three and is used for transport. The payload
of an IP packet may be TCP or UDP segments that operate at layer 4 and use
port numbers. The segment then of course carry their own payload of layers 5
and up.
"Luan Kim" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTE
Check out our site www.ccbootcamp.com
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 248-620-9603
Fax# 248-620-9650
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL PROTECTED]
E-Mail CCIE Boot Camp [EMAIL PROT
See www.hadax.com These units with cables are fairly expensive.
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 248-620-9603
Fax# 248-620-9650
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL PROTECTED]
E-Mail
The answer is here. http://www.ccbootcamp.com/ccielab.htm
2. All successful students receive a CCIE number. The first CCIE was issued
number #1025. Number #1024 was given to the CCIE lab. They chose #1024
because 1024 is a kilohertz. "The lab will kill-ya and it hurts."
""Michael L. Willia
cription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
--
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
PH# 248-620-9607
Fax# 248-620-9603
Pager# 810-681-0382
Alpha Page (don't put text in the su
m/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
--
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
PH# 248-620-9607
Fax# 248-620-9603
P
Not to my knowledge, but it could appear so you should be somewhat familar
with it.
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 810-790-0880 x.105
Fax# 248-620-9603
Pager# 810-681-0382
Alpha Page (don't put text in the subject
For more info read through www.ccbootcamp.com
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 810-790-0880 x.105
Fax# 248-620-9603
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL PROTECTED]
E-Mail CCIE Boot Ca
Hotmail at http://www.hotmail.com
>
> ___
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROT
gt; FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
--
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
PH# 248-620-9607
Fax# 248-620-9603
Pager# 810-681-0382
n the elan?
>
> For example,
>
> r1---atmr2
>
> ___
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure
76 matches
Mail list logo
