interface loopback 0
ip ospf network point-to-point
!
that'll make it push it out as a /24, not /32.
On Mon, 4 Dec 2000, Elaluf, Sylvia, wrote:
> Hello everybody
>
> I need some help with the following:
>
> Given the following
>
> loopback 0
> ip address 10.10.10.1 255.255.255.0
>
It works on the 7206VXRs. I've got it running using 2 PA-FE-TX
cards. Whatever you do don't use the 2 port fast ether cards, as they're
designed more for ISL trunking from token ring networks and start getting
errors after you start pushing some heavy traffic through them.
just create a port-c
with a
pretty high score, as long as you make sure you understand everything
covered the test really wasn't too bad.
Hope this helps.
Paul Schultz
CCNP
On Thu, 30 Nov 2000, Donald Williams wrote:
> Have anyone taken the CCNP Switching 2.0 test? If so are ther a lot of
> multicasting q
If i'm understanding correctly you want the routes you redistribute into
the NSSA to not make it all the way through to area 0?
Very simple.. let's say on the ASBR you redistribute routes that fall
under 172.16.0.0/16 into the NSSA
on the ABR, just put:
summary-address 172.16.0.0 255.255.0.0
Cisco Aironet stuff works quite well, but you have to be very careful with
it. Aironet uses direct sequence spread spectrum technology which doesn't
scale well at all.. There's 11 possible channels to use, but only 3 of
them are non-overlapping.. so basically in one given rooftop or so you're
l
I found the Boson BCMSN tests pretty good.. I used the Boson test +
ciscopress BCMSN book + some hands on experience and didn't have much
trouble passing the exam.. If you think the Boson tests are ambigous just
wait for the real thing :)
Paul Schultz, CCNP
On Mon, 13 Nov 2000, Jason
CCNA is a prerequisite for getting CCNP certified, but CCNP certification
is NOT a prerequisite to get CCIE.
On Mon, 6 Nov 2000, Nelluri Reddy wrote:
> I heard that as of July 2000, a CCNA certification is a pre-requisite
> for taking CCNP exams and a CCNP certification is a pre-requisite fo
If you want just data, aeronet is great, if you want voice + data and you
have a boatload of money to spend you should look at the wavespan wireless
gear.
100mb ethernet + 2 T1 circuits. We use the 100mb for data and the 2 T1
circuits that come off the wireless radios to do voice over. They a
The standard US "working week" is 40 hours/week, but that's almost never
the case with people in this field. I know the younger people (like
myself) are known for pulling pretty long hours. I don't know about most
people, but a 55-60 hour week is about normal for me. I've done longer
(hell ev
We use WhatsUp Gold. For the paging we use pagers that can accept
alphanumeric email pages (like Arch).
On Mon, 31 Jul 2000, Nasser N Khwaja wrote:
> Hello Everybody,
> Does anyone know about any software package that monitors a network so that
> if any router(s) goes down the support Engine
You're studying for the wrong exam... the coarse material changed quite a
bit from CLSC to BCMSN. You're better off picking up the Cisco Press
BCMSN book and study that.
Paul
On 31 Jul 2000, Dele Ajayi wrote:
> Hi guys,
> I'm preparing to take the BCMSN exam by Friday and I've been using the
There's two things you need to allow for MS PPTP (I assume that's what
you're using.)
Port 1723 tcp, and either GRE (protocol 47) for NT4 or IPSec (protocol
50) for Win2k. I know NT4 uses GRE and this setup will work, but I've
heard Win2k has an option to use IPSec instead. Either way allow
wh
> Good luck with your future exams.
>
> Ole
>
>
> Ole Drews Jensen
> Systems Network Manager
> CCNA, MCSE, MCP+I
> RWR Enterprises, Inc.
> [EMAIL PROTECTED]
> ~~~~
>
>
>
> -Original Message-
> From: Paul Schult
Just took this test today. I heard from everyone that the switching exams
are incredibly difficult so I studied the hell out of the material, after
that the actual exam was a LOT easier than I expected. I found the
routing 2.0 exam to be pretty diffucult and scored an 873, found switching
to be
I've done this with 1605's and 802's running 12.0 IOS.. the format is
like:
ip nat inside source static tcp 10.0.0.2 80 interface Serial1 80
(you can use the external "real" ip instead of the interface, either will
work.)
Basically this says anything coming in on the routable IP on serial 1 po
The address "classes" have been absolete for about 5 years. Don't think
of addresses in terms of Class A, B, and C's, think of them as CIDR
blocks. When someone says a "class C" they probably just mean a /24, same
with a B (/16).
For example my company commonly refers to the "Class B" we've b
You CAN make it a totally stubby area, as long as your Cisco router is the
ABR. Remember a "totally stubby" setting only means that your router will
only send a 0.0.0.0 default route into the OSPF area, as opposed to a
0.0.0.0 default and type 3/4 summary LSAs. As far as packet headers and
that
Actually it is possible in Cisco,
for standard lists do:
(config)# ip access-list standard 10
(config-std-nacl)#no permit blahblahblahblah
for extended do:
(config)#ip access-list extended 102
(config-ext-nacl)# no deny blahblahblah
You'll probably only find this on newer IOS versions
Paul
ACRC covers more things, queueing, bridging, ISDN, appletalk, IPX,
etc. BSCN/Routing 2.0 focuses almost all on dynamic IP routing
protocols, route-maps, access-lists, and so on..
The test follows the class corriculum, so I'd suggest checking out the
course outlines on the training and certifica
You more than likely have an IOS image on the router that the router
doesn't have enough RAM to use. This happens a lot when you put certain
IOS images on 2600 routers with less than 24 megs of ram.
What you need to do is hit break when it first starts to boot up and use
tftpdnld to grab the ap
Just took and passed the CCNP Routing 2.0 exam.
I thought this test was pretty hard, the wording on some of the questions
was just rediculous in some cases. The rumors are true, there is NO
bridging/queueing/isdn/appletalk/ipx on this exam. A LOT of BGP, and I do
mean a lot.
Here's what I use
I usually just put dialer idle-timeout 2147483, I think this is the max
number of seconds you can put on it, and have had pretty good luck with
the connection not timing out.
On Wed, 5 Jul 2000, Nahrajieh D.Anggaon wrote:
> Hello,
>
> How do you disable "dialer idle-timeout" and set the DDR
put a router in place to route between to two
networks.
Hope this helps!
Paul Schultz
On Wed, 5 Jul 2000, Darren Blake wrote:
> Hi All,
>
> I am new to this list so sorry if this has been asked before.
> I am really confused about the benefits/setup of Vlans. The more read
23 matches
Mail list logo