Hi all,
Can somebody point me to the location where I can copy paste the base
ATM switch configuration to be used in the labs like Ipexpert? Since I
am not as familiar as FR switch, all I need is to have very basic
connectivity from ATM router having 1 or 2 PVCs.
Thanks,
Rajesh
Message Po
Hello everybody,
As the subject says, I am kinda stuck in item D of the exercise # 326 (
advanced routing ). Can somebody explain what should be done?
Thanks,
rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73400&t=73400
--
Hello all,
Is it possible to configure a Cisco router as just a host in IPv6
network. Would that be equivalent having a Windows PC running IPv6
stack in the network coexisting with other routers?
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73110&t=73110
--
Hello everybody,
I am wondering if there is any tool like Sniffer / Ethereal which
allows capturing and analysing IPv6 traffic?
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73033&t=73033
--
FAQ, list archives,
Hello all,
If a router has its interfaces in Area 1 and Area 2 and no Area 0, is it
still considered to be an ABR OR strictly, one of the interfaces has to
be in Area 0 to be an ABR?
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72624&t=72624
-
Just to make sure though.. because I didn't see in the attached configs.
Were the
vlans 2 and 3 created at this point?
thanks,
rajesh
"Steiven Poh-(Jaring MailBox)" wrote:
> Dear All,
>
> I congifured a simple L3 routing on my 3550-EMI, but seem like not working.
> Any help?
>
> Thanks
>
> ==
Hello everybody,
Assume there is no expilicit question to summarise a particular subnet,
is it really necessary to include "area range" or "summary-address"
command in specific routers? In the practice labs we see the final goal
is to see all networks in all the routers. Even without the
summari
How about configuring a "storm control" for multicast which will avoid these
problems?
-rajesh
TP wrote:
> Dear Group,
>
> I need help about multiscast.
> This is a simple topology... I've to test some video streamer devices so I
> must generate multicast traffic.
> All video devices are connec
Hello all,
I have a practice lab setup as follows :
R1 ( bri int ) -- ISDN switch ---
(bri int ) -- R2.
I have configured the ISDN simulator with Basic-ni1 settings and the
directory #s and SPIDs for both the ports.
The following output I see when I issue
Hello all,
I have a practice lab setup as follows :
R1 ( bri int ) -- ISDN switch ---
(bri int ) -- R2.
I have configured the ISDN simulator with Basic-ni1 settings and the
directory #s and SPIDs for both the ports.
The following output I see when I issue
Thanks to all who responded to the query. Will give a shot one by one
to see how it goes.
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70278&t=70278
--
FAQ, list archives, and subscription info: http://www.gro
Hello all,
I see this message upon bootup on 85K router - "System INIT -
Insufficient memory to boot the image". I suspected the processor board
and replaced with the known good one. But still it keeps coming. Any
idea of what exactly is going on?
Thanks,
rajesh
Message Posted at:
http:
Hi all,
The scenario is this : A router with one of the interface running OSPF
and other interface running IGRP.
When redistributing, assuming OSPF carries networks for elsewhere a
combination of /24, /26 and /28 networks. When we want to redistribute
/26 and /28 networks to IGRP with a conditi
Hi all,
I am facing a situation like this :
1. 2 routers connected back to back via serial connections and
4 loopbacks configured on both of them. IGRP is running as IGP
protocol. Soon after I configure BGP on them and advertising the
loopback networks, I could see the BGP routes in th
Hi all,
I come across some situations where I could see some routes in the BGP
table, but those routes aren't there in the regular routing table. The
configuration has "no sync" configured and couldn't guess how to go
about it. Can somebody help me out here?
thanks,
r
Message Posted at:
h
Hi all,
I have a scenario like this :
Area 1 Area 2
R1 R2
s2/0.1 s2/0.1
Both are point to point networks.
The configuration for R1 is
int s2/0.1 po
Hi team,
I am finding difficult to follow on the Lab 8 of the ccbootcamp - Sec 1
z (cc) and Sec. 3 ( More BGP configuration ). Can somebody explain
whats been asked there?
Thanks,
rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60993&t=60993
--
I just found on this URL on the cisco's web site and as many of us suggested
the
following could be one of the reasons :
http://www.cisco.com/warp/public/104/dcprob.html
On the bri interfaces
1. Encapsulation should be ppp and " no peer neighbor-route" should be
configured.
2. " ip ospf networ
Hi all,
Basically, this question stems from Lab 1 of ccbootcamp.
1. R3 and R4 needs virtual link configured between them for R4 routes to
be seen in all the other routers.
I go to R3 and say " area 3 virtual-link " and in R4 " area 3
virtual-link 10.34.1.1" . For the virtual links to come up
Hello everybody.
I am working on Lab 2 of ccbootcamp and am confused with the following.
Can somebody clarify on that please?
Item 2b says Configure R1's ethernet in OSPF area 1. .
Item 2i says Configure the router R1 with EIGRP and redistribute with
OSPF ( Here I thought I can onl
I think it is " ip netmask-format "
-rajesh
John Tafasi wrote:
> Hi,
>
> does any one remembers the command to change how the netmask is represented
> in the "show interface".
>
> 192.168.5.0/24 versus 192.168.5.0 255.255.255.0
>
> Thanks
Message Posted at:
http://www.groupstudy.com/form/
Hi all,
I am trying to understand the "leaky bucket concept" in Qos for 3550
platform. For some reason, it confuses me a lot. Can somebody point me
to an URL which explains in simpler terms?
Thanks,
-r
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59841&t=59841
--
Hi all,
In the practice labs at the end of the book of CCIE prac studies by Karl
Solie, I see a very common mention like the one below ( mostly I have
seen under RIP routing, sometimes it also comes in other Routing
protocol sections as well )
" Make sure that no other routes are redistributed i
Hi all,
Just wondering if there are any software ( like Cisco CIMs for ISDN
interfaces ) for ATM interfaces as well?
Thanks,
rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57511&t=57511
--
FAQ, list archives, and subscri
Take ex :
192.168.0.0/24 to 192.168.10.0/24 are the networks.
For filtering odd networks here is what the ACL will look like
192.168.1.0 and the WCM will be 0.0.254.255
For filtering even networks it will be 192.168.0.0 , WCM - 0.0.254.255.
Means that for ODD networks last bit of the third oct
Hi all,
I am trying to configure a router on a stick configuration - with 26xx
series router's e0/0 port connected to fa0/1 port of CAT3550.
Router's E0 port is configured like this
int e0/1
no shu
no ip address
int e0/1.1
encap isl 20
ip address 192.168.20.1 255.255.255.0
int e0/1.2
encap isl
Hi all,
Everytime I get confused with this metrics while redistribution :
The scenario is this :
1. Redist from OSPF to EIGRP.
router eigrp 1
redis ospf 1
default-metric 1544 100 255 1 1500
router ospf 1
redis eigrp 1 subnets
default-metric 25
What di
Hi all,
I read somewhere about the following questions in OSPF and couldn't get
an answer. I would appreciate if somebody could throw some light on this
:
1. Whats is the max. inter area summarization that can be done in a
router?
2 Using summarisation techniques how will you advertise the loo
Hi all,
Took the new version of CCIE written exam. The exam consists of 180 min
and 150 questions. The passing score is 105. But my score was only 67.
:-(
Lot of questions in IS-IS, Mcast and QoS. Lot of scenario based
questions as well. Most of them were "choose the best answer" only a
few
Hi all,
I was trying to setup this network in fig 12-9. I got stuck in one
particular route. I am not able to view the route 172.16.10.0/24 on the
router "peter" which is running RIP and got to see this route as
redistributed one.
The question is in which router do I need to give the "area
Hi all,
I was trying to setup this network in fig 12-9. I got stuck in one
particular route. I am not able to view the route 172.16.10.0/24 on the
router "peter" which is running RIP and got to see this route as
redistributed one.
The question is in which router do I need to give the "area
As far as the CLI is concerned you DO NOT need to worry about that.
Absolutely there is
no diff. between CAT 4k with sup3 with 3550 switches. You have no problems
in using it.
Rajesh
Kim Graham wrote:
> We are creating a lab at work to support a few functions. One of the
> functions is a tra
Hi all,
Can anybody comment on how good Boson's Detailed Lab set are?
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=46258&t=46258
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cis
Thanks all for those who responded. I really appreciate for each one of
your responses
and I got a real understanding from each ones answer.
Thanks once again.
Rajesh
Rajesh Kumar wrote:
> Hi all,
>
> CCIE Practical studies - Vol I book - EIGRP chapter says that the
> bandwidth
Hi all,
CCIE Practical studies - Vol I book - EIGRP chapter says that the
bandwidth command used in serial interfaces should be set to a value
equal to the remote port speed to which the serial interface is
connected to.
For ex :
RTR 1 -- RTR 2
Hi all,
I am looking for the book :
Configuring Cisco routers for bridging, DLSW+ and Desktop protocols by
Tan Nam-kee.
I anybody interested to sell this book, pls let me know.
Thanks,
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39715&t=39715
--
Hi all,
I am running into some issues in the Lab 7 ( Redistribution ) of
Ipexpert's lab notes :
Can somebody help me with the following items?
1. Item 2 : I couldn't get the following things properly : R2 should
have the summarized entry in its routing table if either R5 or R6 fails.
2. I
Hi all,
I am quoting here the second paragraph on Pg 518 of CCIE practical
studies book
"Because link-state protocols rely on the use of periodic hellos to
retain neighbor adjacency snapshot routing can be used only with
link-state protocols, such as IGRP and RIP for IP, RIP for IPX, and RTMP
f
Hi all,
Can somebody clarify me the following :
1. In a Hub-Spoke configuration of FR network, what is the appropriate
configuration on the spoke side when it is a
(a) Physical Interface : FR map statements /
Interface-dlci
(b) Point-Point interface :I am p
Hi all,
Some time back, Brad had sent out an email about the review of the book
- CCIE Practical Studies Vol I - chapter wise. Somehow I couldn't see
this in my mail box. If anybody have saved a copy of the mail, Is it
possible to forward to me?
Thanks
Rajesh
Message Posted at:
http://www.g
Hi all,
Here is the question that I have.
In Routing TCP/IP vol 1 by Jeff Doyle - OSPF chapter pg 417 under P-
MP paragraph - it says OSPF packets are mcast.
On Pg 433, 1st paragraph, 4th line it says Hellos are ucast in Point to
Multipoint networks.
Can somebody share with their explanatio
In addition to that, I would strongly recommend the use of this book :
1. BGP4 Config. guide and command reference book - William Parkhurst.
This book goes to each and every command of the BGP and examples are given
for better
understanding of the Cisco's CLI. Both of the books go hand in hand
Hi all,
I have some queries in the BGP lab scenario - Sec 6 in IPEXPERT lab.
Point no 4 says : Configure R7 and R8 in AS65078.- This was done.
Configure R7 and R8 such that if any new
routers were added to the 150.50.4.0 subnet they could peer to R7 or R8
in AS2
Hi all,
When I was going thru the topics in BGP - distribute-list and
route-map, I was trying to find out the differences between the two and
where each of these commands would really be useful.
The following is the only difference that I could think of.
===
Hi all,
Can somebody give their experiences with the Boson's Router simulator
software - how useful it is, flexible and its rating with other
software( if any ) in the market.
Thanks
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33479&t=33479
--
Hi all,
I would like to know about Boson's Router Simulator software - how good
are they, experiences with the product - good/ bad and Is there any
other competitive products out in the market similar to that of Boson's?
Thanks
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.ph
Hi all,
I was going thru the Lab 4 of IPEXPERT notes - IGRP/EIGRP.
I couldn't follow the reason why on Router 4's serial interface "ip
split-horizon" is given.
I understand that on FR cloud "split-horizon" is disabled by default on
FR physical interfaces and enabled on FR sub interfaces. If th
Hi all,
The scenario is this :
R2R3---R4
R3 is a FR switch between 2 DTE devices R2 and R4.
R4 is having a loopback interface, ethernet interface and a serial
interface. I am running IGRP 2 on R4 on loopback and serial
inter
Hi all,
Can somebody clarify me the meaning of the "poll-interval" sub option in
more descriptive way
in this command.
1. neighbor priority poll-interval
Thanks
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31328&t=31328
---
You might also need / go thru the book - BGP configurtion and command
reference -
William Parkhurst. The book covers almost all the commands under BGP and
simple example
for all of those.
my $0.02
rajesh
Marcus Faust wrote:
> I have recently attained the CCNA and CCNP certifications and was
I think you should opt for Sniffer software from Network Associates.
www.sniffer.com.
The software supports Windows platforms and should be ideal for your
requirement what
you listed.
Rajesh
Michael Smith wrote:
> A bit off topic, but would appreciate any suggestions -
>
> Looking for a softw
The BGP extended ACL works differently from the regular extended ACL. Here
is how it
goes.
In the access list that you gave as an example :
access-list 101 permit ip 10.6.144.48 0.0.0.8 255.255.255.240 0.0.0.8
a .10.6.144.48 is the source network
b. 0.0.0.8 is the wild card mask asssociated w
It means the baud rate to was set to 38400 bps the other end to which it is
connected to
- either a PC configured using Hyperterminal or a Terminal server.
Let me know if you need anything.
Thanks
Rajesh
"Kaminski, Shawn G" wrote:
> I was working on a 2611 router and noticed that the configur
VLANs configured as PVLANs are done only when the VTP mode is transparent.
So the VTP
messages aren't carried or passed to the adjacent switch. You will have to
configure in
all the switches. By the way, which platform you are using and which
version of
software?
Thanks
Rajesh
Urooj's Hi-spe
No keepalive or keepalive 0 should work.
rajesh
Tom E wrote:
> How can you get a serial interface to go up/up without a cable connected?
I
> have tried loop and no keep.
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of pikumar.vcf]
Message Posted at:
http://
what version of CAT os you are having?
king kaung wrote:
> Hi All,
>
> After we migrate all our legacy 3Com Switches to Cisco switches, we found
> out that our current core switch Cat4006 does not support dynamic
> VLAN(according to vendors) but I check on the cisco website and I saw
> dynamic V
Hi all,
I have been going thru the book - Cisco BGP 4 - command and
configuration handbook from William Parkhurst and personally feel that
book is very good - explaining each and every command options and
examples for that.
It is useful for me to practice each and every command for my exam. At
I probably see the potential cause would be the baud rate. ( just because
you see some
garbled messages )
Cisco routers by default has 2 bits allocated for baud rate. 2 bits make 4
combinations
viz, 1200, 4800, 9600 and 2400. Try these settings one by one on the
Hyperterm session
that you had co
Hi Luiz,
I would strongly suggest always use books from cisco press. It goes pretty
much closely
with the exam objectives and you are always on the track.
All the best.
rajesh
Luiz Olivieri wrote:
> Hi All,
>
> I would like an advise from people studying for CCNP on which book I
> should u
Hi all,
I am interested in getting the IPexpert lab exercises? Anybody who is
willing to give can send me a mail and make a deal...
Thanks
Rajesh
[GroupStudy.com removed an attachment of type text/x-vcard which had a name
of pikumar.vcf]
Message Posted at:
http://www.groupstudy.com/form/r
Thanks to all who responded for this question. I shall try all the options
and will
shoot a mail to let everyone know which one worked.
Thanks
Rajesh
"[EMAIL PROTECTED]" wrote:
> - Original Message -
> From: "David Goddard"
> To:
> Sent: Friday, September 07, 2001 6:06 PM
> Subject: R
Hi all,
The scenario is this :
Three router pod in a triangular fashion connected via ethernet ports to
a switch in a common vlan.
router a
| e0
|
router b -switch---
Hi all,
Just wanted to know, if there are any tool that I can use for monitoring
the Internet bandwidth while the connection is there. The option I have
is ATT Cablemodem and I need to know how much is the bandwidth at any
given time.
Thanks
rajesh
[GroupStudy.com removed an attachment of type
Hi all,
I just wanted to know about the classes - ECP 1 and 2 conducted by mentor
tech. in CA.
Is ECP 2 really necessary to take up the lab or just ECP 1 should do fine.
What
additions are there in ECP 2?
Your comments are appreciated.
Thanks
Rajesh
[GroupStudy.com removed an attachment of ty
CDP frame is a multicast. It is not a unicast/broadcast.
You can see this information from www.cisco.com
Rajesh
"[EMAIL PROTECTED]" wrote:
> I turned all debugging for CDP on and I am no seeing much? I don't have a
> sniffer.
>
> r2#sh cdp nei
> Capability Codes: R - Router, T - Trans Bridge
You can start the troubleshooting from the Physical layer onwards. Ensure
you use the
correct cables - crossover cable instead of back to back.
Then if that if fine, then check the datalink connections.
Then go higher up the stack, to see if you need to add anything in the
configuration.
If you a
Hi all,
I have a 3640 router and Ethernet module loaded in the system. The
router recognises as E0/0 and E0/1.
when I try to plug in my WIC - 2 A/S card, the system is not recognizing
the serial card. The same card is working in 26xx router. I went into
cisco site and found that the cards ar
Hi all,
I am going to take the CCIE written next week. I would like to have some
feedback from
people about the last minute brush up of topics.
Thanks
Rajesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=919&t=919
--
FAQ, li
68 matches
Mail list logo