My opinion you can rent one day of rack time for ATM and understand it.
""Dave Williams"" wrote in message
news:[EMAIL PROTECTED]
> Group,
>
>
>
> I'm planning on purchasing my final addition to my R&S home lab sometime
> this month. I'm having a hard time deciding if I should add another 3550
under ospf
no discard route internal (does not install the Null0 route in routing
table)
no discard route external (used whey you use the summary address command)
Ronnie
""Shab Hanon"" wrote in message
news:[EMAIL PROTECTED]
> Hi everybody
> The case .. OSPF summary address with Null 0
>
> In al
If your idle timeout is 120 sec and you have interesting traffic defined
with the dialer-list 1 protocol ip permit command
then I would start check for bugs in my IOS. As long as some interest
traffic is going over the link (ie. routing protocol, user traffic, etc)
something has to reset the timers
You are correct. Dialer-group 1 looks for dialer-list 1 protocol ip permit.
The dialer-list 1 command is right after you access list if you are looking
at your running config. If it is not there then this is your problem.
Will have no effect on users login. Only effect is they will not be
disconne
Sounds like you don't have interesting traffic associated with the
interface. Are you using DDR or Dialer interfaces? Are you running a routing
protocol over this ISDN link?
In the running-config
DDR look for
int bri 0
dialer-group 1
global command
dialer-list protocol ip permit
Dialer inter
Check you Spids they are not valid on both the router and simulator. If they
are correct issue the command clear int bri0 which will clear the bri
interface. If this doesn't work you may have to reboot your routers and
simulator.
""Rajesh Kumar"" wrote in message
news:[EMAIL PROTECTED]
> Hello a
Ronnie
""Ron"" wrote in message
news:[EMAIL PROTECTED]
> I have a new 6513 Catalyst switch and am getting the following when I boot
> the device:
>
> Autoboot: failed, BOOT string is empty
> rommon 1 >
>
> Can someone lead me in the right direction on what to do to get the boot
> string set up pro
nd you take down
your VTP server. Client A in VLAN A could not get to Client B in Vlan B. All
local vlan traffic would work on the 4006 because it is locally switched but
it cannot route vlans.
Ronnie
""The Road Goes Ever On"" wrote in
message news:[EMAIL PROTECTED]
> "&
Once you take the VTP server down all vlans will basically go down. Which
will bring down the network with only one VTP server. They will sit there
and do nothing until the vtp server comes back online. It would be a good
idea to have two VTP servers so you can take them down one at a time and
upgr
Once you take the VTP server down all vlans will basically go down. Which
will bring down the network with only one VTP server. They will sit there
and do nothing until the vtp server comes back online. It would be a good
idea to have two VTP servers so you can take them down one at a time and
upgr
you need to enable portfast. Read about portfast.
Set spantree portfast enable ( I think this is the syntax I don't have a
6509 in front of me now.)
""Vik Vikky"" wrote in message
news:[EMAIL PROTECTED]
> Hi *,
>
> am fairly new to cisco products/ commands.
>
> have a problem
> got a WS-X6348-
In the 2503 router you have two options to make it dial put a dialer-string
under the bri or assign a sting to the end of your dialer map command.
You are missing that.
Ronnie
wrote in message
news:[EMAIL PROTECTED]
> Hi group,
>
> I recently got a ILS-1000 ISDN simulator for my lab, I config tw
Best Documentation CD you can get updated quite regularly.
""John Tafasi"" wrote in message
news:[EMAIL PROTECTED]
> Hi Group,
>
> I need to buy an updated documentation cd that contains Catalyst 3550
> documentations. If any one can sell me one please let me know.
>
>
> Thanks
> John Tafasi
Best Documentation CD you can get updated quite regularly.
http://www.cisco.com/univercd/home/home.htm
""John Tafasi"" wrote in message
news:[EMAIL PROTECTED]
> Hi Group,
>
> I need to buy an updated documentation cd that contains Catalyst 3550
> documentations. If any one can sell me one plea
Fast Ethernet to both 6500's. Not sure exactly what the question is?
Does the 8600 no have a Fast Ethernet card installed or is it OC3 or
something.
Ronnie
""Owens Samuel"" wrote in message
news:[EMAIL PROTECTED]
> I have a project where I need to connect a Nortel Passport 8600 to two
Cisco
> 65
I have written expect scripts to test connectivity.
Do you have backup interface applied or are you using dialer watch.
Ronnie
""Rich Muller"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello-
>
> Anyone have a current script used to test isdn line availability? There
are
>
Make sure you turn on portfast for workstation ports.
set spantree portfast enable
This will cause the port to start forwarding in 5 seconds as apposed to 50.
Ronnie
""Tunde Kalejaiye"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hi all,
>
> we just upgraded our network to
Try changing the dialer list
- Original Message -
From: Munit Singla
To: Ronnie Higginbotham
Cc: [EMAIL PROTECTED]
Sent: Friday, December 13, 2002 6:09 PM
Subject: Re: Hi problem regarding PPP HELP [7:59184]
Hi Ronnie,
thanx for the reply.see router 2
Can you please post Router 2 config
Ronnie
""Munit Singla"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
> I am new to this group.A big Great hello to every one.
> Now my problem...
>
> I have leased line back to back routers.I have configured dialer
> interface althoug
Basically it means that the server or whatever connected it flapping. Try
hard coding the speed and duplex to match if set to auto.
Ronnie
""Sim, CT (Chee Tong)"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi.. I checked from the log of my cat5505 switch, I found the follow
You will have to do a password recovery,. It will require rebooting the
router. Attached is link of step by step instructions
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_password_reco
very09186a0080093e1a.shtml
Ronnie
""bi.s"" wrote in message
news:200210091616.QAA00483@;grou
Have lab for RTP Feb 28, would like to swap for sometime in March or early
May RTP or San Jose.
Please email me at [EMAIL PROTECTED]
Ronnie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54172&t=54172
--
FAQ, list archives, an
If these are the configs you are running two different versions of RIP.
Router 2501A is running version 2 while the others are version 1.
Did you mean to do this?
What is the reason you need to redistribute the connected interfaces on the
bottom 2 routers? Rip will do this for you. Let the routi
Yes The power supplies are hot-swappable.
""Firesox"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Could please someon confirm the additional power supply the existing cat
> 4000 serires switches are hot-swappable?
> For example for 4006, I can plug in the third power supply
I have PPPoE working on a 501 PIX no issues with 6.2.1. My MTU size is set
to 1500 both inside and outside. I never adjusted the default settings.
mtu outside 1500
mtu inside 1500
Ronnie
""Rik Guyler"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Has anybody had a problem wit
It is not sending the URL. Go to Cisco.com and do a search on Polycom Video
First link
http://www.cisco.com/warp/public/788/voip/polycom_video_over_ip.html
""Ronnie Higginbotham"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> "&quo
""Ronnie Higginbotham"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Watch for word wrap
>
> Ronnie
>
>
>
> ""Michael L. Williams"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTEC
Watch for word wrap
Ronnie
""Michael L. Williams"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Depends on the model, but usually you'll see traffic all into either
> 128Kbps, 384kbps, 768Kbps or 1.5Mbps We have a Polycom unit that has
> ISDN and a LAN port, but if you
Had the same problem. I had some one help me out so I will pass this info
on.
First you have to be running 6.2 on the firewall on the here is a PDF for
cisco's site explaining the PPPoE setup needed
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/pixc
lnt.htm
Here are th
lso means you use a
> User
> Name/Password combination to connect) correct!?!
>
> If so, what model PIX do you have?
>
> The 501/506 models support PPPoE under 6.2.1.
>
> The following link should get you started
> http://www.cisco.com/univercd/cc/td/doc/product/iaa
Got it working Mark. Thanks for your help.
""Ronnie Higginbotham"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Thanks again Mark.
>
> Right now I working on licensing with Cisco because I need to upgrade my
PIX
> code to 6.2 which s
re used to make the PPPoE
> negotiation work under the Basic DSL account I started out with. For this
> reason, this is why I think you shouldn't have a problem getting it
working.
>
> Good luck!
>
> Mark
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[E
odels support PPPoE under 6.2.1.
>
> The following link should get you started
>
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/config/pixc
> lnt.htm
>
> Mark
>
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
I am new to the Pix setup has anybody configured a PIX with EnterNet DSL
setup. Any config help would be appreciated.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=43302&t=43302
--
FAQ, list archives, and subscription info: htt
Yes.
""Steven A. Ridder"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is anyone attending Networkers in San Diego this year? Just curious.
>
> --
> RFC 1149 Compliant
>
> Get in my head:
> http://sar.dynu.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
Joe,
I had the exact same problem but in a larger environment. Some client on
one subnet would get disconnected while other did not. After hours and days
of troubleshooting and this is what we found out.
1.) As400 needed some PTF files applied for the TCP/IP stack (Basically
applied patches to
Focus on the CID book. You need to know the SNA backward and forward. I had
alot of questions on it. I used boson test 1 to help me find my weakness
and where to focus my studies. Do not underestimate the test it is tough but
doable.
Ronnie
""Juan Blanco"" wrote in message
[EMAIL PROTECTED]">n
37 matches
Mail list logo
