Hi
It fails when I try to deselect vim-x or vim-enhanced. Is it intended by vi-fans? :-)
It says something like 'it cannot be a base package' or the like, I didn't have a
chance to memorize it.
Alexander
Hello,
Same as Stefan van der Eijk,...
"warning: Net::FTP: Bad service 'ftp' ..propagated at /usr/bin/perl-install/ftp.pm"
line 41.
During install in expert mode.
--
Michel PRILLOT [EMAIL PROTECTED]
*nix Administrateur
-
It's probably a security problem...
Check /etc/hosts.allow /etc/hosts.deny /etc/hosts.lpd
Also check permissions on the spool directories.
You should really add the "name" of the printer into /etc/hosts (with the IP
of course) and use the printname when setting up the printer via
Guillaume Cottenceau [EMAIL PROTECTED] writes:
Don Head [EMAIL PROTECTED] writes:
Unfortunately, this doesn't help.
I had already noticed that the CD had bad RPMS, so I used the pidentd RPM
off Cooker, then tried the one from Beta 2, then tried the one from 7.0-2,
then tried the
"Riyad Kalla" [EMAIL PROTECTED] writes:
How are you using a win modem? I thought I remmebr reading somewhere int he
kernel that "Winmodem Support: NEVER" or something to that extent.
this is because:
. it needs a driver. at present time these manufacturers do not write
drivers for Linux.
Guillaume Cottenceau wrote:
For all of you cookers out there, who wish to test our third beta [which
should be closer as never to the final version..] I must apologize for the
delay, and ask you to wait a little bit more, for availability of ISO
image.
Thank you for keeping us informed.
--
Rene Eske Jensen [EMAIL PROTECTED] writes:
The installation runs pretty (?) smooth until it autodetects my graphics
adapter, then it chockes. My adapter is a Diamond Viper 550 (TNT), and
it used to run very smooth on beta2 (though I haven't tried the HD
install before).
When I reboots,
Rich Larson [EMAIL PROTECTED] writes:
I had the same problem (can't find libiX.so.6), you
need to run ldconfig.( Maybe an error in the rpm
script that installs that lib?)
Pixel modified the way ldconfig works, to speed up the install. There
shall remain some problems for a little time.
In
Jürgen Zimmermann [EMAIL PROTECTED] writes:
Hello,
I wonder if there is an archive of spec-files for "downloadable"
software which is not distributable.
My example is the jdk from SUN, for which I have built such
a spec file, but since the downloaded tar-archives are only
for private
Hello David Walluck,
On Mon, 5 Jun 2000 20:44:14 -0400 (EDT) GMT your local time,
which was Tuesday, June 06, 2000, 7:44:14 AM (GMT+0700) my local time,
David Walluck wrote:
Brian Fleischman wrote:
I do can do a -c1 just fine also. If I do a -d1 (dma)...locks
up...harddrive
light on
Eric [EMAIL PROTECTED] writes:
My motherboard is a Tyan tiger. I'd be surprised if
that was it. - It's an old board.
I checked the logs. I don't have them with me but I can
give some details.
After Partitioning and formating I got the error
package basesystem not found. I checked
"Danny W. Burdick" [EMAIL PROTECTED] writes:
Can someone tell me why I can't print to my network printer.
I have an HP DirectJet connected to an el cheapo epson 400 and set it up
as a remote printer named epson
with it's ip 192.168.1.150 for it's hostname
and I have no idea what to put
Harry Henry Gebel [EMAIL PROTECTED] writes:
On Mon, Jun 05, 2000 at 12:37:38PM +0200, Alexandre Dussart wrote:
Harry Henry Gebel [EMAIL PROTECTED] writes:
[root@localhost hgebel]# sounddrake
Can't read /usr/share/harddrake/soundcard
Error in pnpdump call...
Seems to be an error in
Matthew Porter [EMAIL PROTECTED] writes:
Chmouel Boudjnah wrote:
Matthew Porter [EMAIL PROTECTED] writes:
On that subject of flooding the ftp servers, there are numerous comments
about /. not participating in 'responsible journalism' by putting the
story up before the mirros
"Alexander V. Voinov" [EMAIL PROTECTED] writes:
Hi
It fails when I try to deselect vim-x or vim-enhanced. Is it intended by vi-fans? :-)
It says something like 'it cannot be a base package' or the like, I didn't have a
chance to memorize it.
yep, tis a bug in DrakX. The same happens
well at one time i found away to use certain winmodems
i think it was called linmodem.net
that or linmodems.net but i dunno if there still doing the project though
-Original Message-
From: Guillaume Cottenceau [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 06, 2000 1:41 AM
To: [EMAIL
On Mon, Jun 05, 2000 at 12:03:25PM -0800, Civileme wrote:
KDE2 Rpms ar on contrib and seem to work tolerably well, but first one has to
DL openssl,
The sources support openssl _optionnally_ but of course with
a binary package, there's no choice. It's either excluded or required.
and even
On Tue, 6 Jun 2000, kallador wrote:
well at one time i found away to use certain winmodems
i think it was called linmodem.net
that or linmodems.net but i dunno if there still doing the project though
limodems.org.
The problem with losemodems is that they have to rely on a driver which
"Riyad Kalla" [EMAIL PROTECTED] writes:
--
Fred - May the source be with you
On Tue, Jun 06, 2000 at 09:23:24AM +0200, Alexandre Dussart wrote:
What's say pnpdump?
# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21b (library isapnptools-1.21b)
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at
:~how do I get the digest format?
Below is a part of the message sympa sends when it receives a
"help" request.
SET list NOMAIL * To suspend the message reception for list
SET list DIGEST * Message reception in compilation mode
Guillaume Cottenceau wrote:
Rich Larson [EMAIL PROTECTED] writes:
I had the same problem (can't find libiX.so.6), you
need to run ldconfig.( Maybe an error in the rpm
script that installs that lib?)
Pixel modified the way ldconfig works, to speed up the install. There
shall remain
Randy Welch [EMAIL PROTECTED] writes:
Did this get fixed for 7.1? Or is everyone doomed to run ldconfig after
the install ( which for linux novices is not good at all and for more
seasoned linux folks annoying )?
this is not in 7.1, this is for post 7.1
Steven I have not tried it yet, but does the new 7.1 beta have XFree 86 on
Steven them? IS there a selection to use XFree86 4.0 instead of 3.6? How
Steven do you choose? Also, does the distribution include the beta
Steven drivers on NVidia's web site?
You can select the X of your
I've just installed cooker (from http), after the reboot
the system ends with a kernel panic (not being able to mount
the / filesystem). My system has an adaptec 2940uw and ncr 860
SCSI controllers (which were detected during install) but no
IDE devices.
Any idea why SCSI support isn't installed
/. comments are also noting that this is the same ISO and packages as beta3.
Is this true?
humm dunno, qa ?
NO, hum well, not really, only one difference: mandrake-release :)
--
Warly
the buildroot is compiled into binary of clisp
I'm installing 7.1 (not cooker) from the network. I came accross a bug
while doing a custom install, a "fatal error, division by zero". I tried
again with Automated install and it works fine so far. Sorry I don't
have more details, just to let you know in case you can quickly fix
something
Sorry, I can't say anything for Windows 98 because I've never used it more
than a couple times as I don't have it installed. However, my friend has a
17G WDC and runs Win98 and his drive seemed to be working fine and he had
4 drives in there I think. However, on this list I remember at least 4
As far as how much slower the drive is with dma turned off...well, I have an
older 3 gig fugistu that is non ata66. With the dma turned on, I get about
12meg/sec transfer. With my wd 13gig I get about 1.3 or so. So it is
seriously hurting the drives performance.
B. K. Barley
Stefan van der Eijk [EMAIL PROTECTED] writes:
I've just installed cooker (from http), after the reboot
the system ends with a kernel panic (not being able to mount
the / filesystem). My system has an adaptec 2940uw and ncr 860
SCSI controllers (which were detected during install) but no
IDE
Harry Henry Gebel [EMAIL PROTECTED] writes:
# Card 2: (serial identifier 1d 80 00 00 00 01 1c 2e 02)
# Vendor Id @QN1c01, Serial Number 2147483648, checksum 0x1D.
# Ident byte 0, (02) differs from resource data (40)
#Assuming the card is broken and this is the start of the resource data
#
if it helps anyone support.dell.com has a rpm for soundblaster live
On Tue, 06 Jun 2000, you wrote:
As far as how much slower the drive is with dma turned off...well, I have
an older 3 gig fugistu that is non ata66. With the dma turned on, I get
about 12meg/sec transfer. With my wd 13gig I get about 1.3 or so. So it
is seriously hurting the drives
Name: spruce Distribution: Linux-Mandrake
Version : 0.7.1 Vendor: MandrakeSoft
- Up to 0.7.0
For those having difficulties running KDE2-alphas and KDE1, here are the
scripts I used on my Mandrake 7.0 machine. There are probably many
other ways, but this works for me ...
#
#!/bin/sh
# /opt/kde2/bin/kde1
export
Ooops, yes, sorry about that. I tend to use cooker to mean anything more up to
date than the CD I originally used, which you can't see and don't know what
that was !!! :-) Must stop writing e-mails gone midnight !
Still, you get the jist.
Owen
On Mon, 05 Jun 2000, you wrote:
On Sun, 04 Jun
Oops, sorry, that should be -A1. (But a peek at the man page would have told
you that I goofed, and how.)
---
On Mon, 05 Jun 2000, you wrote:
What does -a 1 option do?
From: "Jonathan M. Prigot" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] 32
How about a "this is what I propose to do" step with the possibility of
overriding the proposal? ("Don't replace my custom kernel, but it's OK to
upgrade cdrecord and downgrade xmms") (For real fun, make the buttons say [YES]
and [OK] ;-} )
--
Jonathan M. Prigot (617-278-0794)
Brigham and
I'm still installing 7.1 from the network. After installing all packages
I get to "Configure timezone" with the following error: "cannot list the
available zoneinfos". The console says "cd: can't cd to
/mnt/usr/share/zoneinfo" .. and well, it's true I don't have that file.
TTimo
Timothee Besset [EMAIL PROTECTED] writes:
I'm still installing 7.1 from the network. After installing all packages
I get to "Configure timezone" with the following error: "cannot list the
available zoneinfos". The console says "cd: can't cd to
/mnt/usr/share/zoneinfo" .. and well, it's
"Riyad Kalla" [EMAIL PROTECTED] writes:
I've asked this question about 6 times and never gotten a response:
It sounds from little remarks here and there, that 7.1 has gone final and
off to be pressed/packaged. Where are the final ISOs? And if they aren't out
yet, WHEN? shaking by collar
David Talbot [EMAIL PROTECTED] writes:
Forgive my lack of education on the normal contents of a mandrake distro, I
got a 7.0 CD (free, someone passing it out) at an Internet World show and
never looked back at Red Hat. The link below only includes CDs, is there a
version of the distro that
"Jim Mitchell" [EMAIL PROTECTED] writes:
Does this mean that the cooker tree is open again?
it is at present time.
--
Guillaume Cottenceau
Alan Shoemaker [EMAIL PROTECTED] writes:
Riyadit would appear that unlike past releases, they are
holding off on putting the release iso's on the mirror sites
till the retail boxed sets are in place in the retailer's
stores. So, when the retail stuff is all in place then
they'll put
Ron Stodden [EMAIL PROTECTED] writes:
The coder should be taken outside and shot, as should Mandrake QA.
not even a little smiley after this statement. waooh. hard..
--
Guillaume Cottenceau
"Hoyt" [EMAIL PROTECTED] writes:
What I see here is a communication problem. There are volunteers helping
produce a product from which Mandrake will make money. Mandrake could have
announced "deep freeze" in a more effective way to the list if for nothing
else than consideration for the
On Tue, 06 Jun 2000, you wrote:
On Mon, Jun 05, 2000 at 12:03:25PM -0800, Civileme wrote:
I did a --nodeps install and I get segfaults here and there and some
freezeups that need ctrl-alt-backspace.
Hmm, really ? Don't have that here...
The segfaults come with the logout, after
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux Mandrake w/some brand of asian
motherboard. Someone said that slashdot printed that a
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux Mandrake w/some brand of asian
motherboard. Someone said that slashdot printed that
I don't remember seeing anyone post this problem. I
attempted an ftp install using a disk created from the
network.img file from a Mandrake 7.1 final release
mirror. I was performing an upgrade, so it asked me
for my current root partition. It then went to a
windo called Package group
this showed up sometime after lunch EST
http://www.linux-mandrake.com/en/pr-helium.php3
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alan Shoemaker
Sent: Tuesday, June 06, 2000 5:29 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] 7.1 Final ISOs
If you don't want to drop out wu-ftpd, please correct these errors :
* add the correct line in /etc/ftpaccess for permitting anonymous access.
* add /home/ftp and /home/ftp/bin/ls /home/ftp/lib/lib[c,termcap] for
permitting anonymous navigation.
Thanks.
--
Thomas Poindessous
EpX asso
Benjaminhow come you snipped off my P.S.?
Alan
Benjamin Reed wrote:
GuillaumeWhat 'recent release announce?' I've neither
received nor seen any release announcement. I subscribe to
the announce list and the only recent announcement in there
was about bundling the Linux
I am getting about 4.7 megs /second on my 7200 rpm WD. I am using ata/66 an
hdparm without the d1 option. I am not sure if this rate is good or not,
but when I see people say that they are getting 12+ megs per sec I start to
worry.
4.7 is no good, right?
How can I know if DMA is turned on
Jonyes, I know, that's why I added the P.S.!!
Alan
Jon Williams wrote:
this showed up sometime after lunch EST
http://www.linux-mandrake.com/en/pr-helium.php3
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alan Shoemaker
Sent: Tuesday,
Benjaminhow come you snipped off my P.S.?
Because I had a brain fart and didn't notice it I guess. My bad. :)
--
Ben Reed a.k.a. Ranger Rick ([EMAIL PROTECTED])
http://defiance.dyndns.org / http://radio.scenespot.org/
Now playing on Defiance Radio: Silent Warrior by Enigma
On Tue, Jun 06, 2000 at 05:54:24PM +0200, Alexandre Dussart wrote:
Harry Henry Gebel [EMAIL PROTECTED] writes:
# Card 2: (serial identifier 1d 80 00 00 00 01 1c 2e 02)
# Vendor Id @QN1c01, Serial Number 2147483648, checksum 0x1D.
# Ident byte 0, (02) differs from resource data (40)
I just downloaded beta 3 a couple of days ago ...what is different in the
final version that is worth downloading?
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
First time doing the 486 install, so I thought I'd detail anything I find.
This may also help for making the 7.1/486 distro. Here goes..
- - -
1. CD HTML documentation
The index.htm and install.htm files in the root of the CD-ROM need some
editing to match the fact that we are using Mandrake
The "Easy CD Creator" instructions may not work for all people. I have
found that if you do not select "disc-at-once" from the menu that comes up
after you pick the image, depending on your version/defaults you will
get two disc "table of contents" -- causing the cd to be unusable. (it's
on
- Original Message -
From: "Guillaume Cottenceau" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 06, 2000 5:16 PM
Subject: Re: [Cooker] tomsrtbt - Everyone take a deep breath
"Hoyt" [EMAIL PROTECTED] writes:
What I see here is a communication problem. There are
Pixel wrote:
Randy Welch [EMAIL PROTECTED] writes:
Did this get fixed for 7.1? Or is everyone doomed to run ldconfig after
the install ( which for linux novices is not good at all and for more
seasoned linux folks annoying )?
this is not in 7.1, this is for post 7.1
Some how this
i have a very strange request, could i get access to my srpm on
/incoming on the mandrakesoft ftp site, i need the spec file, as i lost
alot of information in a hd crash today. any help would be much
apreacated
-DarkWlf
When will the development of Mandrake 7.2 / 7.5 / 8 start?
What will be the new features?
Thanx
Chris
Guillaume Cottenceau wrote:
not even a little smiley after this statement. waooh. hard..
Oops! Belated smiley :-(Belated grin G.
7.1 is out
But there are NO ftp/rsync mirror sites in the southern hemisphere,
NONE!!!
Makes it difficult.
How come?
--
Regards,
Ron. [AU] - sent
The iso images are available from the following sites:
ftp://ftp.linux.tucows.com/pub/ISO/Mandrake/ (Canada)
ftp://ftp.free.fr/pub/Distributions_Linux/Mandrake-iso/sparc-7.1-beta/ (France)
--
Fred - May the source be with you
67 matches
Mail list logo
