Package: cryptkeeper
Version: 0.9.5-1.1
Severity: wishlist
Tags: upstream
The encfs package supports an --ondemand flag that enables encfs mounts that
have exceeded the --idle timeout to be re-mounted when the next directory
access is attempted. Currently, the preferences in the cryptkeeper GUI
It turns out that there was a dependency in 0.6.0, but the dependency no
longer exists in 0.7.2-1+b1. The problem was caused by an older
installation of 0.6.0 in the PATH, which was taking precedence over the
current package from Debian Testing.
Please go ahead and close the ticket.
--
Oh,
Package: libdmtx-utils
Version: 0.7.2-1+b1
Severity: important
The Debian package fails to specify the proper dependency on
libgraphicsmagick1. This results in repeatable failures when reading
Data Matrix images:
$ dmtxread foo
dmtxread: error while loading shared libraries:
It turns out that the functionality is there, but no longer available by
default within the GUI. The user needs to manually add in the Amazon
search:
Settings - Configure Tellico - Data Sources - New -
Source Type - Amazon.com Web Services
along with the user's Amazon Web Services (AWS)
Package: libheckle-ruby
Version: 1.4.2-2
Severity: important
This package requires libsexp-processor-ruby to run, but it is not
installed as a dependency.
Line 2 of /usr/lib/ruby/1.8/heckle.rb states:
require 'sexp_processor'
which will cause heckle to fail unless it is installed
Package: tellico
Version: 2.1-1
Severity: important
The 2.x series is supposed to have updated support for the new Amazon
search API, but the option isn't even available in the Debian build.
This would seem to be a package build issue, rather than a source bug,
since the tellico home page
Package: serendipity
Version: 1.3.1-1
Severity: normal
During package installation, the following error is observed:
dbconfig-common: writing config to /etc/dbconfig-common/serendipity.conf
*** WARNING: ucf was run from a maintainer
I had a similar problem after upgrading to this version. It was not only
preventing proper installation of mdadm, but also apache, samba, and
other packages (see ERRORS below).
Through trial and error, I found that I could get mdadm (and all other
looped packages) to finish installation by
Package: byobu
Version: 2.34-1
Severity: normal
This problem is affecting me, too. A little investigation shows that
this bug is fixed upstream in Ubuntu (version 2.36-0ubuntu1). The
relevant information can be found here:
https://bugs.launchpad.net/ubuntu/+source/byobu/+bug/440221
and all
Package: transmission-daemon
Version: 1.76-1
Severity: important
When running headless, the web client is not able to connect to the
daemon:
$ transmission-daemon -f -g ~/.config/transmission -T -a 127.0.0.1
[14:10:12.949] RPC Server: Adding address to whitelist: 127.0.0.1
Package: vsftpd
Version: 2.2.0-4
Severity: normal
Tags: patch
The init.d script that comes with vsftpd aborts all processing unless
listen=yes in the configuration file. As a result, if you do the
following:
1. Start vsftpd in standalone mode
2. Comment out listen=yes, or change it to
Package: bash
Version: 4.0-4
Severity: normal
When attemtping to assign to an associative array, bash crashed and
rendered the pty unusable. The following is a cut-and-paste from the
bash session:
$ declare -A foo
$ foo=(dir=$HOME)
malloc: ../bash/hashlib.c:306: assertion botched
Package: insserv
Version: 1.12.0-14
Severity: normal
When attempting to purge a package (in this example, the readahead
package), the following warnings about bootchart are issued:
$ sudo aptitude purge readahead
Reading package lists... Done
Building dependency tree
On Wed, Sep 02, 2009 at 11:14:05PM +0200, Michal ??iha?? wrote:
It needs to cause failure on installation or otherwise rpm would
complain on every start.
The package does not complete installation as a result, so this is most
definitely a bug that should be reopened. Leaving a package in a
Package: rpm
Version: 4.7.1-3
Severity: grave
Justification: renders package unusable
The updated rpm package fails to install, reporting some sort of
incompatibility with a previous version. Attempts to remove or purge it
would remove various other packages, such as lsb or alien.
Setting
Package: sysrqd
Version: 10-1
Severity: normal
Attempting to remove (rather than purge) sysrqd if the service has been
stopped results in an error, and appears to leave the package installed.
However, purge successfully removes the package.
$ sudo aptitude remove sysrqd
Reading package
Package: sysrqd
Version: 10-1
Severity: important
When connected to sysrq on localhost, issuing h (or any unrecognized
key) should bring up help, per sysrq.txt. However, it blanks the screen,
and does not seem to accept any other keys, forcing the user to issue an
actual sysrq reboot at the
Package: fusesmb
Version: 0.8.7-1
Severity: important
fusesmb never populates the mount point, presumably because
fusesmb.cache never actually completes. Generally, the pid file isn't
pointing to a running process:
$ cat .smb/fusesmb.cache.pid
24932
$ ps -p 24932
PID TTY
Package: subversion
Version: 1.5.6dfsg-1
Severity: important
Attempting to checkout any subversion repository from sourceforge
results in an options error. An apparently-related bug (531338) says
that one should update neon27 to the version in unstable, but there is
no dependency on neon27 in
Package: git-svn
Version: 1:1.6.3.1-1
Severity: important
It looks like git-svn has difficulty running simultaneously with svn. With svn
running a checkout in a separate process like so:
svn/sandbox$ svn co https://libdmtx.svn.sourceforge.net/svnroot/libdmtx
libdmtx
I then started a
Just to clarify, running git-svn once /usr/bin/svn has completed results
in normal operation.
--
Oh, look: rocks!
-- Doctor Who, Destiny of the Daleks
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: sun-java6-plugin
Version: 6-14-1
Severity: important
Installing the package does not make the plugin available to the
alternatives system. For example:
$ sudo update-alternatives --config iceweasel-javaplugin.so
There is only one alternative in link group
Package: inotify-tools
Version: 3.13-1
Severity: normal
The inotifywait and inotifywatch man page do not document the MOVE_SELF
event. This event can be seen with the following:
touch foo
inotifywait -m foo
mv foo bar
This results in the following output:
Setting up
Package: dnotify
Version: 0.18.0-2
Severity: normal
Dnotify will print duplicate messages when a file changes. For example,
running the following:
mkdir /tmp/dnotify
dnotify --modify /tmp/dnotify
touch /tmp/dnotify/test
echo 1 /tmp/dnotify/test
results in output to the screen of:
$
Package: gdm
Version: 2.20.9-1
Severity: important
Attempting to run a nested desktop with:
/usr/share/gdm/applications/gdmflexiserver-xnest.desktop
fails silently. The same is true when using the System-Log Out-Switch
User menu option in GNOME.
I was unable to locate any error messages
Package: tightvnc-java
Version: 1.2.7-6
Severity: normal
The tightvnc-java package in debian, like the vnc-java package (see bug
#445338) doesn't support the ZRLE encoding scheme which is now the
default with current VNC implementations. There is a newer upstream
package that fixes this
I'm experiencing the same problem here. As others have mentioned, the
use case where this becomes a problem is when attempting to build both
amd64 and i386 packages on the same box.
For example:
DIST=sid ARCH=amd64 pdebuild --auto-debsign --buildresult /tmp/$(basename
$PWD) --debsign-k
Package: unetbootin
Version: 323-1
Severity: normal
I attempted to install an 861M ISO to a 1GB USB drive, and the
application consistently hung during the bootloader installation phase.
Installing to a 4GB drive was successful, and resulted in 872M used.
An 11MB discrepancy shouldn't cause the
Package: git-core
Version: 1:1.6.2.4-1
Severity: important
When trying to upgrade from the version in testing to the version in
unstable, a conflict arises with git-core that leaves aptitude in a
broken state:
Preparing to replace git-core 1:1.6.2.4-1 (using
Package: aptitude
Version: 0.5.2.1-1
Severity: important
The new version of aptitude in experimental fails to install properly.
This appears to be related to some sort of xapian support required by
the post-installation script. Repeated invocations attempting to fix a
partial install do not
Just to clarify, things work as expected if I manually run a2enmod and
select unique_id. However, most of the other Apache 2.x modules either
automagically install themselves, or prompt the administrator to enable
them.
The point is that there's a functional dependency on mod_unique_id that
Package: mod-security-common
Version: 2.5.9-1
Severity: important
ModSecurity does not work properly (e.g. rules fail to trigger) and
reports errors such as the following to the Apache error.log file:
[Sat Apr 04 19:22:40 2009] [error] ModSecurity: ModSecurity requires
mod_unique_id to be
Package: hplip
Version: 2.8.6.b-3
Severity: normal
When launching hp-systray directly, or when it is launched automatically
by a tool such as hp-toolbox, it reports an X error:
HP Linux Imaging and Printing System (ver. 2.8.6b)
System Tray Status Service ver. 0.1
Copyright (c)
On Sat, Nov 29, 2008 at 07:44:30AM +0100, Julien Valroff wrote:
You should either install everything from sid (nautilus and
libnautilus-extension1 2.20 + nautilus-open-terminal 0.8) or
everything from experimental (now 2.24 and 0.9).
Installing all three packages from experimental now allows
On Wed, Dec 03, 2008 at 06:06:53PM +0100, Julien Valroff wrote:
Regarding dependencies, this should indeed be checked carefully. I do
not think you have installed nautilus from experimental as your
original report shows you had nautilus 2.20-7 and
libnautilus-extension1 2.22.5.1-1 installed.
On Thu, Nov 27, 2008 at 09:59:13PM +0100, Josselin Mouette wrote:
How do you start it? What is the value of the
/apps/nautilus/preferences/show_desktop GConf key?
For manual testing, I am running it from the command-line:
$ nautilus --no-desktop
The key is:
$ gconftool-2 --get
Package: nautilus-dbg
Version: 2.20.0-7
Severity: normal
The files in /usr/lib/debug/usr/bin, such as
/usr/lib/debug/usr/bin/nautilus, are not installed with execute
permissions. In addition, it doesn't look like nautilus-dbg is part of
the alternatives system, so it isn't possible to easily
On Thu, Nov 27, 2008 at 10:02:03PM +0100, Josselin Mouette wrote:
and obtain a gdb backtrace as described at
http://wiki.debian.org/HowToGetABacktrace
$ sudo aptitude install nautilus-dbg libgnomevfs2-0-dbg libgtk2.0-0-dbg
$ gdb nautilus
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software
Nautilus is supposed to be launched automatically by gnome. If it is
segfaulting, then it isn't going to run. The --no-desktop flag was for
testing, so as not to clutter the issue with irrelevancies.
You get the exact same result if you *don't* pass the flag:
$ nautilus
Initializing
On Fri, Nov 28, 2008 at 09:18:57PM +0100, Julien Valroff wrote:
What version of nautilus-open-terminal do you have?
I was using version 0.8-2. At your suggestion, I ran:
$ sudo aptitude install nautilus-open-terminal/experimental
and installed nautilus-open-terminal 0.9-3 experimental. I
Package: nautilus
Version: 2.20.0-7
Severity: important
Nautilus will run, but will not display the desktop or desktop icons.
This is true whether the user is an existing user with prior nautilus
configuration, or a brand new user created to test nautilus.
The lack of a desktop makes gnome
Package: nautilus
Version: 2.20.0-7
Severity: important
This was tested under KDE, but may apply in other situations, too.
Nautilus will segfault when running with the --no-desktop or --browser
options. Strace indicates that this may be a malloc() error.
$ nautilus --no-desktop
Initializing
Package: x11vnc
Version: 0.9.3.dfsg.1-1
Severity: important
The SSL-enabled java applet needed to connect to an ssl-enabled session
does not seem to be available as part of this package, or available
elsewhere within the distribution.
Running x11vnc -ssl -usepw and then attempting to connect
Package: k3b
Version: 1.0.5-3
Severity: important
k3b will not verify the MD5 of any DVD that it writes, and fails with
various errors after writing when the verify option is selected. It is
worth noting that the DVD images that have been written are (usually)
fine, as evidenced by a byte
Package: awesome
Version: 3.0-1
Severity: important
Awesome segfaults under both VNC and NVIDIA. It cannot be started from
startx, GDM, redirected to an alternate display, or in any way be made
to run on my system.
Here is the output from gdb:
$ DISPLAY=:5 gdb awesome
GNU gdb
Package: denyhosts
Version: 2.6-4
Severity: normal
Tags: patch
If you change the value of HOSTS_DENY in /etc/denyhosts.conf, the
dh_reenable script will not work properly because the default value of
/etc/hosts.deny is hard-coded into the dh_reenable script.
dh_reenable should parse the
Package: hplip-gui
Version: 2.8.5-1
Severity: normal
The following error occurred during an upgrade from the previous
release:
Unpacking replacement hplip-gui ...
Processing triggers for python-support ...
Compiling /var/lib/python-support/python2.4/vcpx/repository/bzr.py ...
On Sun, Jun 08, 2008 at 10:50:40PM -0400, Ari Pollak wrote:
Are you using Network Manager?
It is installed on the system, but not running. It is neither in the
process list, nor installed onto the panel. All network management was
manually configured.
--
Oh, look: rocks!
-- Doctor
On Fri, Jun 06, 2008 at 09:12:42AM -0400, Ari Pollak wrote:
Do you have multiple accounts enabled?
Yes. But even if I turn them all off, and only enable a single account
at a time, I get the same behavior.
--
Oh, look: rocks!
-- Doctor Who, Destiny of the Daleks
--
To UNSUBSCRIBE,
On Fri, Jun 06, 2008 at 11:03:39PM +0300, Teodor wrote:
I guess you're having a proxy in use configured either on pidgin or a
global one for your local account. It happened to me once when I was
using a global proxy for testing..
Both Gnome and Pidgin are configured for direct Internet
Package: pidgin
Version: 2.4.2-2
Severity: normal
The status drop-down menu (Available, Away, Invisible, et al.) always
shows Waiting for network connection in gray text next to the chosen
status (e.g. Available - Waiting for network connection), even when
connected to the network and actively
On Fri, May 23, 2008 at 09:28:27AM +0200, Joop Stakenborg wrote:
I hope this clarifies things. I wil probably make changes to the code,
so it doesn't accept the -9 option.
Yes, reporting an improper flag to the user seems like a good idea.
However, it's probably more urgent to update the man
Package: firestarter
Version: 1.0.3-6
Severity: important
Tags: patch
Firestarter contains two options for blocking broadcasts:
- Preferences-Firewall-Advanced Options-Block broadcasts from external
- Preferences-Firewall-Advanced Options-Block broadcasts from
internal network
Package: paq8l
Version: 20070308-1
Severity: important
When using high compression on files, even small ones like copies of
/etc/passwd, the screen starts filling with errors like these:
$ cd /tmp
$ cp /etc/passwd .
$ paq8l -9 passwd
Transform fails at 0, input=0 decoded=0,
Package: paq8l
Version: 20070308-1
Severity: minor
Tags: patch
The man page refers to a readme file that is in a different location
than that specified. The following diff should be applied to the man
page to correct the problem.
--- paq8l.1
+++ paq8l.1
@@ -44,4 +44,4 @@
Enter paq8l without an
Package: procinfo
Version: 18-2
Followup-For: Bug #421924
I'm having the same problem here, although once in a very great while
the program will succeed without segfaulting. I'm attaching straces of
both instances.
##
# This is
Package: trickle
Version: 1.07-5
Followup-For: Bug #375173
Running any high-bandwidth application (e.g. trickle -d 450 hellanzb)
results in ~75% higher CPU utilization by the application than without
trickle, even on a dual-processor quad-core system.
-- System Information:
Debian Release:
On Wed, May 14, 2008 at 03:22:00PM -0400, Joey Hess wrote:
I'd need to see your debootstrap.log to make any guesses about what is
If/when it fails again, I'll attach one. In the meantime, switching from
mirrors.kernel.org to ftp.us.debian.org has cleared up the problem, but
does that mean that
Package: azureus
Version: 3.0.5.0-1
Severity: important
Several functions, such as being able to restart azureus or download
additional plugins, are broken because the azupdater plugin is missing.
I get errors both when attempting to restart, as well as attempting to
download any plugins at all.
Package: gnome-system-monitor
Version: 2.22.1-1
Followup-For: Bug #471152
I'm running a dual-processor quad-core, and am experiencing high CPU
utilization on one or two cores every time I open the resources tab on
System Monitor. Setting the default update interval higher (e.g. around
4 seconds)
Package: debootstrap
Version: 1.0.8
Severity: important
Some of the variants fail when run using sudo, instead of when logged in as
root. In particular, buildd and the standard install will fail, while minbase
will succeed.
$ sudo debootstrap --arch=i386 --variant=buildd
The issue seems very much related to sudo, as running it as root but via
sudo creates a similar problem:
# sudo debootstrap --arch=i386 --variant=buildd --include=sudo,locales,less
sid sid-build-ia32 http://mirrors.kernel.org/debian/
I: Retrieving Release
I: Retrieving Packages
Package: pioneers-client
Version: 0.10.2-3
Severity: normal
When installing pioneers-client and all recommended dependencies:
aptitude -r install pioneers-client
both Pioneers and Pioneers Server are placed twice into the
Gnome-Games menu. Uninstalling, even with purging, doesn't
Package: gnome-games
Version: 1:2.22.0-1
Severity: normal
Upstream bug filed:
http://bugzilla.gnome.org/show_bug.cgi?id=532503
stating that glchess appears broken, and will not launch from either the
gnome menu or the command line. Traceback follows.
$ glchess
Traceback (most recent call
This is not a fix, but a workaround:
sudo G_SLICE=always-malloc firestarter
The problem appears to be related to GLib, and you can read about this
particular environment variable here:
http://library.gnome.org/devel/glib/stable/glib-running.html
Apparently, the Ubuntu folks have
New packages for libdmtx (0.5.0-6) have been uploaded here:
deb http://www2.codegnome.org:59321/codegnome-debs/ sid contrib non-free
deb-src http://www2.codegnome.org:59321/codegnome-debs/ sid contrib non-free
Please review them, and see if they pass muster for sponsorship and
inclusion
On Mon, Feb 18, 2008 at 06:26:12PM +0100, Roberto Lumbreras wrote:
I'm merging bugs as it is needed only one for the source package, not for
every binary package.
Thanks again for merging the bugs. I have updated all packages, and
lintian now only reports:
$ lintian
On Wed, Jan 09, 2008 at 03:51:25AM +0100, Michael Biebl wrote:
What you want instead is one source package creating 3 binary packages.
Which is what I did...but I grokked that I was supposed to create an ITP
for each .deb, not for each source package. If that was in error, I can
close all three
Package: wnpp
Severity: wishlist
Owner: Todd A. Jacobs [EMAIL PROTECTED]
* Package name: libdmtx
Version : 0.4.0-codegnome.3
Upstream Author : Mike Laughton [EMAIL PROTECTED]
* URL : http://www.libdmtx.org/
* License : LGPL
Programming Lang: C
Description
Package: wnpp
Severity: wishlist
Owner: Todd A. Jacobs [EMAIL PROTECTED]
* Package name: libdmtx-utils
Version : 0.4.0-codegnome.3
Upstream Author : Mike Laughton [EMAIL PROTECTED]
* URL : http://www.libdmtx.org/
* License : LGPL
Programming Lang: C
Package: wnpp
Severity: wishlist
Owner: Todd A. Jacobs [EMAIL PROTECTED]
* Package name: libdmtx-dev
Version : 0.4.0-codegnome.3
Upstream Author : Mike Laughton [EMAIL PROTECTED]
* URL : http://www.libdmtx.org/
* License : LGPL
Programming Lang: C
Package: hplip
Version: 2.7.10-5
Severity: important
When first tested a few weeks back, 2.7.10-5 worked fine. A few
aptitude dist-upgrade runs later, it has stopped working. Oddly
enough, the CUPS back end still works fine: I can print to the printer,
but I can't use any of the hplip tools to
On Sun, Oct 21, 2007 at 03:14:39PM +0200, Robert Lemmen wrote:
thanks for the report, it would be really cool if you could tell me
how exactly you can create this situation, up to now i have never been
I'd be glad to help you debug it, if I can. It seems to be a problem
with any process that
Just as another data point, and to show that it's not just ssh, I'm also
showing some CPU spikage from running trickle against apt-get:
# Attempting to use only 10KB/s of a 100KB/s pipe (5K * 2 http fetch
# processes)
sudo trickle -d 5 apt-get build-dep git-core
# Some relevant
Package: trickle
Version: 1.07-4
Followup-For: Bug #375173
I'm being bitten by the same bug: running something like NNTP (using
port forwarding) over an SSH session managed by trickle results in 100%
CPU utilization (mostly in system, rather than in user), regardless of
the values of -t or -l
Package: vnc-java
Version: 3.3.3r2-7
Severity: normal
New upstream version from tightvnc is 1.3.9, and supports tight
encodings plus auto-negotiation and the ZLRE encodings from RealVNC 4.x.
I've tested tightvnc-1.3.9_javabin.tar.gz from /usr/local/vnc/classes,
and it works fine with no changes
Package: linux-image-2.6.18-4-686
Version: 2.6.18.dfsg.1-11
Severity: grave
Justification: renders package unusable
Attempting to do an upgrade produces the following error:
Setting up linux-image-2.6.18-4-686 (2.6.18.dfsg.1-11) ...
Running depmod.
Finding valid ramdisk creators.
The problem appears to be caused by unresolved dependencies when
tracking stable, but using kernel packages from testing or unstable. The
follwing steps are needed to get this situation straightened out:
1. aptitude remove linux-image-2.6.18-4-686
2. aptitude install coreutils/unstable
Package: ddclient
Version: 3.7.0-2
Severity: important
3.7.0-1 was working fine. However, the unstable update produces the following
error from dpkg:
Setting up ddclient (3.7.0-2) ...
Installing new version of config file /etc/init.d/ddclient ...
/etc/init.d/ddclient: line 36:
Package: spamassassin
Version: 3.1.7-1
Severity: normal
This problem is similar to that reported in #333134, but is for the
current version in unstable. Spamassassin recommends
libmail-spf-query-perl and requires libsys-hostname-long-perl, but
neither is currently part of the .deb control file.
Package: libmail-dkim-perl
Version: 0.19-3
Severity: normal
This package is (or should be) recommended by spamassassin. However, it
fails to initialize as follows:
Nov 26 01:20:55 penguin spamd[32583]: Can't locate Crypt/OpenSSL/Bignum.pm
in @INC (@INC contains: ../lib /usr/share/perl5
Package: kgpg
Version: 4:3.5.5-1
Severity: normal
If you attempt to validate an signed file using kgpg, you get a popup
error similar to the following:
[GNUPG:] PLAINTEXT 74 0
[GNUPG:] GET_BOOL openfile.overwrite.okay
[GNUPG:] GOT_IT
gpg: Signature made Tue 05 Apr 2005 01:39:12
Package: kgpg
Version: 4:3.5.5-1
Severity: minor
When you Right-Click - Actions on a file in Konqueror, you see two KGpg
options: Encrypt File and Sign File. The encrypt option has a lock icon
to indicate that it's related to kgpg, but the sign option does not.
They should both have icons, and
Package: tmda
Version: 1.0.3-1
Severity: minor
The upstream author has resumed work on TMDA, and has declared the
1.0.x branch end-of-life. The new 1.1.x stable branch is currently at
version 1.1.18, and is available at http://wiki.tmda.net/TmdaDownload.
-- System Information:
Debian Release:
Package: hplip
Version: 1.6.7-2
Severity: important
Essentially, things just fail to rasterize. I tried using the GUI to
just send a cover page. The GUI will say Initializing... until it
fails, at which point stderr says:
error: Timeout waiting for rendering. Canceling job #273...
Package: hplip
Version: 1.6.7-2
Severity: normal
All hp-sendfax does is hang indefinitely while trying to process an
input file. Here's the debug output from syslog:
Sep 15 09:31:10 neysa python: hp-sendfax[1549]: debug: ['application/pdf',
'application/postscript', 'application/vnd.hp-HPGL',
Package: uswsusp
Version: 0.2-1
Severity: important
Two of the three swsusp methods fail, and segfault when attempting to
read the configuration file. The configuration file was created with
dpkg-reconfigure, and contains:
# /etc/uswsusp.conf(8) -- Configuration file for s2disk/s2both
I'm tracking testing, and am getting font-related problems with various
applications such as xboard, eboard, and a few others. In particular,
xboard 4.2.7-6 (and 4.2.7-6.1 from unstable) both display the following
error:
X Error of failed request: BadName (named color or font does not exist)
Package: akregator
Version: 4:3.5.2-1+b1
Severity: important
When launching this latest version of akgretaor, a window titled
Plugin error - Akregator always pops up. The error says:
Unable to load storage backend plugin metakit. No feeds are
archived.
One of the results of this is
Package: user-mode-linux
Version: 2.6.16-1um-1
Severity: grave
Justification: renders package unusable
I reported on the UML mailing list that I was unable to boot from an ISO
image, even after various gyrations. Jeff Dike suggested that the binary
was probably compiled without proper block
Package: kdebase-bin
Version: 4:3.5.1-1
Severity: important
When the following packages are installed:
libpam-opie/stable uptodate 0.21-8
opie-server/stable uptodate 2.32-10
and /etc/pam.d/common-auth configured with:
auth sufficient pam_opie.so
auth sufficient
Package: apache
Version: 1.3.33-6sarge1
Severity: normal
Tags: patch
The /etc/logrotate.d/apache configuration provided with Sarge fails to
reload Apache when mod_chroot is enabled. As a result, Apache dies and
must be manually restarted. To fix this, the logrotate script must be
modified to stop
Package: apt
Version: 0.5.28.6
Severity: important
If APT::Default-Release is set to a release name such as sarge or
etch, it doesn't complain, but it doesn't work right, either. It seems
to only expect stable, testing, or unstable. When I attempted a
dist-upgrade with the following:
On Sat, Jun 11, 2005 at 12:32:02PM -0700, Matt Zimmerman wrote:
This is as intended, and all of the examples in the documentation use
the proper names.
Well, I just double-checked the available apt man pages and examples,
and didn't find any warnings to avoid using release names. In fact:
Package: libapache2-mod-chroot
Version: 0.4-2
Severity: important
Following the directions in the documents, specifically
/usr/share/doc/mod-chroot-common/README.Apache20.gz, the administrator
is instructed to link the pid file as follows:
ln -s /var/www/var/run/httpd.pid
VLC is segfaulting with other codecs, too. Here is the last 50 lines of
an strace of a failed VLC client session. According to the file utility,
the source in this case is a MPEG sequence, v2, program multiplex
although I get the same results on xvid, divx, and others.
Full-length straces and
Package: apache2-mpm-prefork
Version: 2.0.53-5
Severity: normal
I'm having a problem with apache2 and mod_deflate on Sarge. I've tried
it with mod_chroot both enabled and not, and it seems to make no
difference. The deflate log is never updated, not matter what I do.
Package: centericq
Version: 4.20.0-2
Severity: important
In MSN, contacts are not showing up as online when they are (e.g. users
who verify out-of-band that they are online do not show up in the
contact list, and connot be messaged), or show up as online in the
contacts list even when I'm
Package: centericq
Version: 4.20.0-2
Severity: normal
In Yahoo, deleting a contact doesn't appear to delete it on the server
side. Deleted contacts magically (and annoyingly) reappear several
seconds after being deleted, but with all related information missing
(e.g. chat history and
Package: bittorrent
Version: 3.4.2-3
Severity: normal
Version 4.0.1 is currently available from http://www.bittorrent.com.
There is a deb package there that does not unpack properly under Sarge,
so a properly Debianized package should be created.
-- System Information:
Debian Release: 3.1
APT
1 - 100 of 102 matches
Mail list logo
