puppydaddy wrote:
> I too have a SB Classic which has just seemed to die on me. It was
> working just fine until we had a power fluctuation and now it won't come
> on. After going over the blog post linked at the beginning of the
> thread, I can see that the red LED is flickering -- going on and
I too have a SB Classic which has just seemed to die on me. It was
working just fine until we had a power fluctuation and now it won't come
on. After going over the blog post linked at the beginning of the
thread, I can see that the red LED is flickering -- going on and off
multiple times per sec
slartibartfast wrote:
> Have a look at this thread. It might help.
> https://forums.slimdevices.com/showthread.php?p=654956
>
> Sent from my Pixel 3a using Tapatalk
My understanding is Net::UDAP only works when the SB3 is not already
configured for networking. I used Net::UDAP once, many moons
Beast Of Bodmin wrote:
> For me, the SB3 is a pinnacle of design, both in terms of how it looks,
> but in terms of the functionality and the musical fidelity. I haven't
> been able to find something that can replace it in the same price range.
> I could never bring myself to cough up for a Trans
florca wrote:
> Maybe' THIS '
> (https://forums.slimdevices.com/showthread.php?113660-ClassicAMP-))would
> be a solution if you like the SB3 form factor (I do...)? Adds up to
> quite a bit of money, but nice result...
For me, the SB3 is a pinnacle of design, both in terms of how it looks,
but i
Maybe' THIS '
(https://forums.slimdevices.com/showthread.php?113660-ClassicAMP-))would
be a solution if you like the SB3 form factor (I do...)? Adds up to
quite a bit of money, but nice result...
Odroid HC1 / Armbian Stretch LMS & LocalPlayer
4x Slim Devices SB3 (White)
1x Boom, 1x Radio
2x Jo
Hi there,
not really, sorry. I can only offer you to have a look if you send me
the unit in question (to Germany). But I cannot promise you that I will
find a solution for this matter. Could be that the CPU is dying (or
whatever it is that causes SB3s to die).
If you are interested, please send
Beast Of Bodmin wrote:
> I opened the blog page and search for VHBW. Their ebay page is onholiday
> until February(!).
>
> I found the same thing on electropapa. Described as a replacement PSU
> for a Squeezebox Classic.
>
> EUR 13.69 inc. P&P
>
> Ordered one.
>
> Let's see!
>
> Cheers,
> B
JoeMuc2009 wrote:
>
> You can find tons of more info on this matter in the blog page mentioned
> above.
>
I opened the blog page and search for VHBW. Their ebay page is onholiday
until February(!).
I found the same thing on electropapa. Described as a replacement PSU
for a Squeezebox Classic.
Hi there,
sorry, better forget about that multimeter test. A lot of people fall
for this. If you measure the voltage of the unloaded PSU, you will
probably find that it delivers 5V as it should. But that does not mean
everything is all right. The problem is that a multimeter does not draw
any cur
Happy New Year 2021 everybody!
JoeMuc2009 wrote:
> Yeah, it's likewise here. I could have sent you one but all shipping
> services have reduced their products to premium which means 35 USD is
> the new lowest limit for sending just anything except for pure paper
> letters. Bummer!
> Anyway, I h
philippe_44 wrote:
> Are you in NAM or EU?
EEA (Switzerland)
Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031
View this thread: http://forums.slimdevices.com/showthread.php?t=109775
_
Beast Of Bodmin wrote:
> I might be able to implement a workaround while I wait. I used tcpdump
> and it seems the unit has an IP address of 192.168.10.10 and is trying
> to talk to 192.168.10.1. So I think I need to set up a route at home and
> also run LMS and the CLI on 192.168.10.1:9000 :909
JoeMuc2009 wrote:
> Yeah, it's likewise here. I could have sent you one but all shipping
> services have reduced their products to premium which means 35 USD is
> the new lowest limit for sending just anything except for pure paper
> letters. Bummer!
> Anyway, I hope this sorts things out for yo
Beast Of Bodmin wrote:
> Yep. The fastest delivery option was something like USD 35. I can
> wait...
Yeah, it's likewise here. I could have sent you one but all shipping
services have reduced their products to premium which means 35 USD is
the new lowest limit for sending just anything except f
JoeMuc2009 wrote:
> Seriously? ;)
Yep. The fastest delivery option was something like USD 35. I can
wait...
Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031
View this thread: http://forums
Beast Of Bodmin wrote:
> Should be here by March 7th :)
Seriously? ;)
PN me if your Boom / Classic / Transporter display has issues!
Blog:
https://www.blogger.com/blogger.g?rinli=1&pli=1&blogID=5053304027701850753#allposts
-
JoeMuc2009 wrote:
> These Wi-Fi boards are harder to get. At eBay, I found two offerings
> which are both from China. Might be problematic but I'm not sure.
> This the link to one of them: https://ebay.us/PdmjPl
>
> ...
>
> Hope this helped a bit. Please keep us informed how your story goes on
KeBul wrote:
> First make sure you have removed the failed wifi card even if ethernet
> port is configured for use a failed wifi card can cause problems
>
I pulled it a few years ago, which allowed me to somehow reconfigure it
for ethernet.
KeBul wrote:
> and second, for the remote receiver i
Beast Of Bodmin wrote:
> Maybe it's time to throw in the towel for my SB3?
>
> I tried to resurrect it today.
>
> The WiFi card died many years ago.
>
> It fell into disuse after the WiFi died, because my apartment didn't
> have ethernet cables in the walls to where cable modem was. Now my ma
These Wi-Fi boards are harder to get. At eBay, I found two offerings
which are both from China. Might be problematic but I'm not sure.
This the link to one of them: https://ebay.us/PdmjPl
AR2413 is the chip that needs to be on the card because it's the only
one the Squeezebox firmware supports. I
Beast Of Bodmin wrote:
> Maybe it's time to throw in the towel for my SB3?
>
> I tried to resurrect it today.
>
> The WiFi card died many years ago.
>
> It fell into disuse after the WiFi died, because my apartment didn't
> have ethernet cables in the walls to where cable modem was. Now my ma
Maybe it's time to throw in the towel for my SB3?
I tried to resurrect it today.
The WiFi card died many years ago.
It fell into disuse after the WiFi died, because my apartment didn't
have ethernet cables in the walls to where cable modem was. Now my main
cable modem is less than a metre away
philippe_44 wrote:
> If you want I have more than a few SB3 motherboards whose CPU will not
> come back. Ill be happy to give you one
Thank you for the "new" display I finally took the plunge and replaced
my 'bad display'
(https://forums.slimdevices.com/showthread.php?109775-Squeezebox-Classic-
ralphy wrote:
> Thanks Joe. Unfortunately, I'm in Canada, but now I know what needs to
> be done. I'll try to source a display from this side of the pond.
>
> I've replaced that unit with a spare for now.
If you want I have more than a few SB3 motherboards whose CPU will not
come back. Ill be
JoeMuc2009 wrote:
> Looks like a line driver defect. It's not a typical issue though, these
> displays are pretty solid. Anyway, in this case there is not much else
> you can do but replace the display entirely.
> I can supply displays, or even take care of the repair job, whichever
> you prefer
Looks like a line driver defect. It's not a typical issue though, these
displays are pretty solid. Anyway, in this case there is not much else
you can do but replace the display entirely.
I can supply displays, or even take care of the repair job, whichever
you prefer. I'm based in Germany and EU
I have a classic display that goes blank along the horizontal centre
after about 30 minutes of plugging it in from cold (room temperature).
Making it hard to navigate the menus with the remote after it blanks
out.
28759
28760
Has anyone seen this failure before? Or suggest how I might
troubles
So after building a piCorePlayer with the 'RaspTouch'
(https://www.audiophonics.fr/en/boitiers-diy-boitiers-divers/rasptouch-chassis-accessories-and-touchscreen-7-kit-diy-black-p-11250.html)
chassis (very nice, but costly), I moved the SBT from the living room to
replace the "broken" SB3 in the b
JoeMuc2009 wrote:
>
> > > >
- did IR Blaster work previously? How did it stop? Did it become
> more and more unreliable, or did it fail at one point?
> > >
>
It did work before, but after a move, the SB3 was set up again in a new
place. When that happened, the blaster did not work
pputzer wrote:
> I've got an SB3 that seems to be in good working order, except that IR
> blaster is not able light up IR diodes plugged into the headphone jack.
> I'm assuming it's probably the capacitors, but replacing those is beyond
> my soldering skills.
I was actually hoping somebody else
I've got an SB3 that seems to be in good working order, except that IR
blaster is not able light up IR diodes plugged into the headphone jack.
I'm assuming it's probably the capacitors, but replacing those is beyond
my soldering skills.
--
What an incredible resource that blog is. Wow!
I've bookmarked it and I hope you'll offer repair services for a long
time to come.
gorman's Profile: http://forums.slimdevices.com/member.php?userid=56
View this thread: htt
philippe_44 wrote:
> Oh sorry, as this response was to my post I missed that
Sorry about that! Btw. I just found two original Squeezbox (v1) in my
storage, is anyone interested in buying one of them? A collector maybe,
as this is history.. it first came without casing :-) was an upgrade
afterwa
On Sun, 6 Jan 2019 07:34:13 +, madpad wrote:
>
> philippe_44 wrote:
>> Chris?
>
> Yes to: chris (at) schoeppi.net so his name is Chris as it seems. ;-)
Yes, it is :-). Got your mail, will answer soon
Ciao,
Schoepp
___
discuss mailing list
madpad wrote:
> Yes to: chris (at) schoeppi.net so his name is Chris as it seems. ;-)
Oh sorry, as this response was to my post I missed that
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPort
philippe_44 wrote:
> Chris?
Yes to: chris (at) schoeppi.net so his name is Chris as it seems. ;-)
madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802
View this thread: http://forums.slimdevices.com/sh
madpad wrote:
> Thanks Chris, I wrote you an email.
Chris?
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi
B3, B2, Pi B+, 2xPi A+
philippe_44 wrote:
> And Ill buy the non-working one at a reasonable price to fix it unless
> Joe wants it too, in which case he has precedence.
Thanks Chris, I wrote you an email.
madpad's Profile: http://forums.slimdev
schoeppi wrote:
> Just want to mension that I have two SB Classics that I could sell. I am
> not sure if I still have the original boxes, manuals and so on, but the
> Classics and power supplys are there and still working fine AFAIK (will
> test this before) :-).
>
> Shipping in Germany is no pr
Just want to mension that I have two SB Classics that I could sell. I am not
sure if I still have the original boxes, manuals and so on, but the Classics
and power supplys are there and still working fine AFAIK (will test this
before) :-).
Shipping in Germany is no problem, shipping to other co
madpad wrote:
> Just opened the classic, are these capacitors ironed in or in a socket?
> Can I just pull to remove them?To add to what @bpa said, these are smd
> capacitor that can be removed
using twist/turn technique but do not pull!. I personally replace them
all with smds but this might be
madpad wrote:
> Just opened the classic, are these capacitors ironed in or in a socket?
> Can I just pull to remove them?
They are soldered in but there are suggestion how to remove them without
desoldering
see
https://forums.slimdevices.com/showthread.php?103213-Squeezebox-3-common-faults-ove
madpad wrote:
> Hey Philippe
>
> So we are talking about all of them, listed under "Issue 4: Crashing
> Instead Of Playback Starting" right? I think I will open the SLIM now
> and check if I see something on the board, if not I will just replace
> all of them.
>
> Thanks.
Just opened the clas
philippe_44 wrote:
> As @bpa says, youll find lots of information on Joes blog. I
> personally always replace all of them.
Hey Philippe
So we are talking about all of them, listed under "Issue 4: Crashing
Instead Of Playback Starting" right? I think I will open the SLIM now
and check if I see
madpad wrote:
> Thanks Philippe. What do I need to do? Which capacitor needs replacing?
As @bpa says, youll find lots of information on Joes blog. I
personally always replace all of them.
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, J
madpad wrote:
> Thanks Philippe. What do I need to do? Which capacitor needs replacing?
Most of the detail is in Joe's blog - link in the first post of the
thread.
bpa's Profile: http://forums.slimdevices.com/member.php?
philippe_44 wrote:
> Sounds like the usual internal capacitor issue ...
Thanks Philippe. What do I need to do? Which capacitor needs replacing?
madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802
View
madpad wrote:
> Hey Joe
>
> So I thought let's add 500 songs to play during the night, so I'm sure
> it would be playing in the morning. After I hit play, it started playing
> for about 15 seconds, and it got dark (offline) again. I could not ping
> the IP anymore. But now something new happend
madpad wrote:
> Hey Joe
>
> Great post and even better Blog, with such detailed repair instructions.
>
> I also own several Squeezbox 3 (Classic) devices. I now have a problem
> with one of them. After a few hours of just being on standby the display
> turns off, and it won't react on any comm
Hey Joe
Great post and even better Blog, with such detailed repair
instructions.
I also own several Squeezbox 3 (Classic) devices. I now have a problem
with one of them. After a few hours of just being on standby the display
turns off, and it won't react on any command until I unplug the power
Hi Joe,
thanks for the tip. I will contact them.
By the way, your blog is absolutely amazing.
Thank you so much
Luca
lvicini's Profile: http://forums.slimdevices.com/member.php?userid=66450
View this thread: http://forum
JoeMuc2009 wrote:
> Hi there,
>
> I've created another blog entry on Squeezebox Classic (SB3) typical
> issues and how to resolve them.
> It can be found here:
>
> https://joes-tech-blog.blogspot.com/2018/11/logitech-slimdevices-squeezebox-classic.html
>
> Let me know if you find anything wron
53 matches
Mail list logo