Dear Stuart,
Thanks so much. Your answers help a lot.
Panyarak Ngamsritragul
Department of Mechanical Engineering
Prince of Songkla University.
On Tue, 28 Apr 2009, Stuart Lewis wrote:
> Hi Panyarak,
>
> The first of your errors is because a bitstream cannot be filtered. In
> this case the bi
@lists.sourceforge.net
Subject: [Dspace-tech] Error in Applying Media Filters
Hi all,
I set the DSpace to run $DSPACE/bin/filter-media as a cron job everyday.
There are some errors generated as attached. Could someone tell what is
going wrong ?
I am using 1.5.2 in a Linux box.
Thanks.
--
Panyar
Hi all,
I set the DSpace to run $DSPACE/bin/filter-media as a cron job everyday.
There are some errors generated as attached. Could someone tell what is
going wrong ?
I am using 1.5.2 in a Linux box.
Thanks.
--
Panyarak Ngamsritragul
Department of Mechanical Engineering
Prince of Songkla U
How much content did you have already? If none, I'd recommend dropping
and recreating the db from scratch, otherwise, there are tricks you
can do with pg_dump and psql to load the old data into a newly created
dspace database.
On Fri, Apr 24, 2009 at 10:26 AM, John Preston wrote:
> OK. It seems t
OK. It seems that the table handle was in fact missing for some reason. The
1.5.1 installation had just recently been installed, and although it looked
like it was working, I had not actually submitted any items to it.
I just ran "psql -f database_schema.sql dspace" on the existing postgres
databa
I'm upgrading from DSpace 1.5.1 to 1.5.2 following the instructions at
http://www.dspace.org/1_5_2Documentation/ch04.html. However when I try to
add a new community I get the following page:
org.postgresql.util.PSQLException: ERROR: relation "handle" does not exist
Can anyone say what I am doing
Hi
I think when you do initdb you create a folder caled "data" where
everything will be.
this folder has to owned by postgres.
usually it would be in /usr/local/pgsql/data
I hope it helps
Paulo Jobim
On 23/04/2009, at 10:37, Mark H. Wood wrote:
> On Thu, Apr 23, 2009 at 08:07:11AM -0500, Lu, Ch
On Thu, Apr 23, 2009 at 08:07:11AM -0500, Lu, Chichi wrote:
> I am trying to install DSpace onto a Windows 2003 server. However, I cannot
> get the Postgres service to start. Event viewer says \"could not open
> process token: error 5\" every time I attempt to start the service via
> Services
Hello,
I am trying to install DSpace onto a Windows 2003 server. However, I cannot
get the Postgres service to start. Event viewer says \"could not open process
token: error 5\" every time I attempt to start the service via Services window
and command prompt. I\'ve uninstalled and install
rary
> Auckland Mail Centre, Private Bag 92019, Auckland 1142, New Zealand
> Ph: 64 9 373-7599 x81928
> http://www.library.auckland.ac.nz/
>
>
>
> -Original Message-
> From: Shane Beers [mailto:sbe...@gmu.edu]
> Sent: Tuesday, 21 April 2009 8:59 a.m.
> To: Dspace Te
ac.nz/
-Original Message-
From: Shane Beers [mailto:sbe...@gmu.edu]
Sent: Tuesday, 21 April 2009 8:59 a.m.
To: Dspace Tech
Subject: [Dspace-tech] Error with dspace_migrate
I am importing a large collection that was exported for us from
another DSpace repository. To remove their handle and
I am importing a large collection that was exported for us from
another DSpace repository. To remove their handle and other
institution-specific metadata, I am running the dspace_migrate
function on the exported data. However, it is proving INCREDIBLY
frustrating, because I routinely am get
Dear Community,
I had installed dspace 1.5 successfully with the port of PostgreSQL 8.3
as 5432, but when I wanted to install the same dspace on another system
with a port of PostgreSQL 8.2 as 5433 after making changes into
dspace.cfg file.
I have the error something like build.xml: 380 java ret
I get the following error in my custom theme based on stock Kubrick,
i.e. it's trying to find my template xsl by name instead of path:
##
org.apache.cocoon.ProcessingException: Unable to get transformer
handler for jndi:/localhost/xmlui//themes/KUMC/Archie/The official
Archie theme.xsl
@lists.sourceforge.net; dspace-tech-requ...@lists.sourceforge.net
Subject: Re: [Dspace-tech] Error while registering nee User
On Fri, Apr 10, 2009 at 01:38:26AM -0500, Islam Ahmad wrote:
> SEVERE: Error initializing endpoint
> java.lang.Exception: Socket bind failed: [730048] Only one usage of each
&g
On Fri, Apr 10, 2009 at 01:38:26AM -0500, Islam Ahmad wrote:
> SEVERE: Error initializing endpoint
> java.lang.Exception: Socket bind failed: [730048] Only one usage of each
> socket address (protocol/network address/port) is normally permitted.
> at org.apache.tomcat.util.net.AprEndpoint.init(Ap
Salam, How are you? I have installed dspace 1.5 with PostgreSQL 8.2, Ant
1.7, Maven2.8, Tomcat 6.0, JDK 1.6 successfully.Whenever any user want to
register then there is an internal system error.Logs of tomcat is the
following. Apr 10, 2009 11:18:16 AM
org.apache.catalina.startup.SetAllPropertiesRu
Dear All
I have changed in message.properties file but nothing happened, still i am
getting this error "???browse.menu.date??? " also the same error in "export
community" option in community admin section which is look like same " ???
jsp.mydspace.request.export community ??? but in collection ad
Hi Mallikarjun,
seems as if you are missing a label in Messages.properties.
Look at this section in Messages.properties:
browse.menu.author = Author
browse.menu.subject = Subject
browse.menu.title = Title
browse.menu.dateissued = Issue Date
browse.menu.dateaccessioned = Submit Date
and add
brow
Dear All,
We have added a new metadata "copyright 'date' "in input form.xml and same
also made searchable in normal search and advanced search everything fine at
this point . but when i am trying to add in browse column , its looking
like ???browse.menu.date??? i think there is some mistake whe
We are updating from 1.4.2 to 1.5.1. When running the index-init we get the
following error:
java.lang.NoSuchMethodError: method java.util.Collections.addAll with
signature (Ljava.util.Collection;[Ljava.lang.Object;)Z was not found
Then the browse by pages either return 500 errors or no-indices f
Hi MArk and other fellows, i had set all the permissions and the issue
persists.I changed the JVM to the sun JVM, i will try to reinstall tomcat 6
instead of 5.5
Anyone knows what can be?
Thank you very much.
I`m using Debian Linux Lenny version, ant and tomcat via aptitude. Postgre 8.2
and dspace
Dear All,
I have installed dspace 1.5 with PostgreSQL 8.3, JDK 1.6, Ant 1.7 and
Tomcat 6.0 successfully.
My DSpace was running successfully and I have added some communities
and collections but all of sudden there is an error Internal server
error and nothing .
Also if I click on a
I believe that I have not seen a filesystem permissions problem
reported this way, but the traceback suggests that Tomcat was reading
DSpace's WEB-INF/web.xml at the time, so it might be well to check the
ownership and permissions of the webapp.'s files. If it's not that
then I fear that this prob
Hi Mark, my jdbc driver it's ok and i had using the SUN JDK 1.6, but when i
changed the JDK to the Open Jdk that comes in Lenny Package the create
administrator works.
But when i tried to access the url the following error appears. What it can be?
Thank you very much.
HTTP Status 500 -
type Excep
I would first make certain that a copy of the PostgreSQL JDBC driver
JAR has been placed in [DSpace]/lib.
However, I see also that Tomcat is running on the Gnu JRE, which is
sometimes thought to be a source of problems. More people will be
able to help you if you can use the Sun JRE.
--
Mark H.
Hi, i`m trying to create administrator in 1.4.2 in a Lenny Debian Linux, postgre
8.3, tomcat 5.5, ant 1.7, jdk 1.6 ant the following error appears:
dspace:/dspace/bin# ./create-administrator
Exception in thread "main" java.lang.NoClassDefFoundError:
org.postgresql.jdbc4.AbstractJdbc4Connection
Dear All, I have the following error while I want to create the
administrator.
Exception occurred:org.postgresql.util.PSQLException: ERROR: operator
does not e
xist: integer = character varying
org.postgresql.util.PSQLException: ERROR: operator does not exist:
integer = cha
racter varying
at org.po
Islam Ahmad,
Please download latest version of DSpace and followed instruction described
in documentation. You will successfully configured DSpace.
On Mon, Mar 9, 2009 at 4:24 PM, Islam Ahmad wrote:
> Dear All,
>
> I have installed Apcahe Ant 1.7, Apcahe Tomcat 6.0, PostgreSql 8.3 and
> DSpace s
Dear All, I have installed Apcahe Ant 1.7, Apcahe Tomcat 6.0, PostgreSql
8.3 and DSpace source 1.4. I have copied build.xml, src into
C:\Apcahe1.7.1 and added C:\DSpace\lib into classpath but I have the
following error masseges while I type the command ant on command prompt
the error is given belo
x27;
-Original Message-
From: Mark H. Wood [mailto:mw...@iupui.edu]
Sent: Friday, March 06, 2009 9:03 AM
To: dspace-tech@lists.sourceforge.net
Subject: Re: [Dspace-tech] error running filter-media script
On Thu, Mar 05, 2009 at 03:58:52PM -0600, Jewel wrote:
> I am running Dspace versio
On Thu, Mar 05, 2009 at 03:58:52PM -0600, Jewel wrote:
> I am running Dspace version 1.5.1 on a Windows 2003 box. We have loaded
> very little into our collection. I can't make out what the error means.
> Below is the error I receive after running: dsrun
> org.dspace.app.mediafilter.MediaFilterM
I am running Dspace version 1.5.1 on a Windows 2003 box. We have loaded
very little into our collection. I can't make out what the error means.
Below is the error I receive after running: dsrun
org.dspace.app.mediafilter.MediaFilterManager
/
E:\dspace\bin>dsrun org.dspace.app.mediafilter.MediaFi
It might be helpful to know the precise versions of the software
you're using. Are you setting up DSpace 1.4, which is now somewhat
old, or 1.4.2, the latest on the 1.4 branch?
The error text suggests that you are using a very recent PostgreSQL.
Pg 8.3 removes some default type casting that older
Hi,
I install dspace 1.4 but i have the follow error when i run
/dspace/bin/create-administrator:
Exception occurred:org.postgresql.util.PSQLException: ERROR: el operador
no existe: integer = character varying
org.postgresql.util.PSQLException: ERROR: el operador no existe: integer
= character var
OK, I found the problem. The aspects portion of the xmlui.xconf file
had the old format
because I copied the old xmui.xconf over the new one. when I fixed it to:
everything is fine.
John
-- Forwarded message
I am upgrading a 1.4.1 DSpace instance using manakin to 1.5.1. After
following the upgrade instructions I get the following error when
trying to use the xmlui:
java.io.FileNotFoundException:
/usr/local/tomcat-dspace/webapps/xmlui/aspects/Administrative/sitemap.xmap
The jspui works fine. Does anyb
Make sure the permissions on your dspace file hierarchy are set to your
tomcat user. I had the same problem last night while installing a new
dspace instance and missed this step only to wind up with a 404 error.
Hope this helps
Cheers
Hayden
Stan Orlov wrote:
> Hi Susan,
>
> I edited the fi
Hi Susan,
I edited the files as suggested, so now I have the following lines:
in /usr/local/dspace/config/dspace.cfg:
log.init.config = ${dspace.dir}/config/log4j.xml
log.dir = ${dspace.dir}/log
in /usr/local/dspace/config/log4j.xml:
in /usr/local/dspace/config/log4j.properties:
log4j.appende
...@gmail.com]
Sent: 02 February 2009 09:56
To: dspace-tech Tech
Subject: [Dspace-tech] Error in build
Hi all.
I'm trying to build DSpace in Ubuntu 8.04 and when I try to build it, a
got this error message:
> ant fresh_install
> Buildfile: build.xml
>
> BUILD FAILED
> /opt/dspace-
Hi all.
I'm trying to build DSpace in Ubuntu 8.04 and when I try to build it, a
got this error message:
> ant fresh_install
> Buildfile: build.xml
>
> BUILD FAILED
> /opt/dspace-1.4-source/build.xml:88: No supported regular expression matcher
> found: java.lang.ClassNotFoundException:
> org.a
Subject: Re: [Dspace-tech] Error installing pljava for statistics plugin
hi all,
I continue with the same problems. I have tried the same things but I'm
getting all the time the same exception: *
org.postgresql.util.PSQLException: ERROR: could not access file
"pljava": No such fi
hi all,
I continue with the same problems. I have tried the same things but I'm
getting all the time the same exception: *
org.postgresql.util.PSQLException: ERROR: could not access file
"pljava": No such file or directory*
My configuration is the following:
postgreSQL 8.1.4
postgresql-8
)[NCI INFORMATION SYSTEMS]
Cc: Stan Orlov; dspace tech
Subject: Re: [Dspace-tech] Error 404 and Tomcat configuration
Susan,
I'm a little surprised you had to do that. Its actually the Ant script that
should have expanded that ${log.dir} in your build process. I suspect
something went
Monday, January 26, 2009 8:40 PM
To: Thornton, Susan M. (LARC-B702)[NCI INFORMATION SYSTEMS]; dspace
tech
Subject: Re: [Dspace-tech] Error 404 and Tomcat configuration
Thanks a lot, Susan!
It starts to make sense now (albeit slowly :). I edited dspace.cfg,
according to your point 1. Before
ARC-B702)[NCI INFORMATION SYSTEMS]; dspace tech
Subject: Re: [Dspace-tech] Error 404 and Tomcat configuration
Thanks a lot, Susan!
It starts to make sense now (albeit slowly :). I edited dspace.cfg, according
to your point 1. Before doing points 2 and 3, one clarification. Do I have
to
em. Maybe this should be included
in the doc??
Sue
From: Stan Orlov [mailto:stan.or...@msvu.ca]
Sent: Monday, January 26, 2009 2:35 PM
To: felipe Melero; dspace tech
Subject: Re: [Dspace-tech] Error 404 and Tomcat configuration
Thank you for the di
Hi,
could you please attach tomcat's log or dspace's log (dspace.log)? Copy
application folder or jspui's war and check if tomcat is deploying it in
tomcat's log.
regards,
Felipe
Stan Orlov escribió:
Greetings!
I installed Dspace 1.5 and Tomcat 6 on Linux SUSE 10.1 on an internal
server an
Greetings!
I installed Dspace 1.5 and Tomcat 6 on Linux SUSE 10.1 on an internal server
and got jspui working. Then, after restarting Tomcat, I had error 404 on
accessing both http://localhost:8080/jspui and http://localhost:8080/xmlui.
At the same time, http://localhost:8080 shows the tomcat scr
On Jan 23, 2009, at 2:31 PM, Brian Freels-Stendel wrote:
> FWIW, we see the same upload and license errors on a regular, but not
> quite common, basis. Particular accounts seem to be affected
> intermittently. If the submitter tries again, though, the second
> attempt is nearly always successfu
FWIW, we see the same upload and license errors on a regular, but not
quite common, basis. Particular accounts seem to be affected
intermittently. If the submitter tries again, though, the second
attempt is nearly always successful. We find the same errors in our log
files.
Our tomcat runs as '
Can you go into you assetstore directory and create files via the
commandline as your tomcat user? Likewise verify that you are testing
with your webapplication servers permissions more specifically, if
your application server can't create files in the directory, you will
get this sort of e
Unfortunately non of these suggestions seems to be the problem. Any
other suggestions?
thanks.
Diggory Mark wrote:
> Yes, filesystem permissions in the assetstore would cause both to
> fail. But also look at your filesystem quota as well to make sure
> there is disk space.
>
> On Jan 22, 2009,
Yes, filesystem permissions in the assetstore would cause both to
fail. But also look at your filesystem quota as well to make sure
there is disk space.
On Jan 22, 2009, at 9:32 AM, Claudia Jürgen wrote:
> Hi Sandy,
>
> seems to be the problem mentioned below, an authorization one.
>
> Your t
Hi Sandy,
seems to be the problem mentioned below, an authorization one.
Your tomcat user needs the authorization to write to
[dspace]/assetstore.
In the installation instructions it is recommended to run tomcat as the
dspace user which owns the [dspace] directory.
Claudia
Sandy De Groote s
Claudia,
Thanks for any help you can provide!
Jan 20, 2009 8:30:13 AM org.apache.catalina.core.StandardWrapperValve invoke
WARNING: Servlet.service() for servlet submit threw exception
java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native M
Hi Sandy,
could you provide more information (stack trace).
Just a guess. Got the tomcat user the proper rights - i.e. does [dspace]
your dspace intallation directory belongs to the user tomcat (assuming
this is your servlet container) is running as?
Claudia Jürgen
Sandy De Groote schrieb:
Could you please put the stack trace of dspace.log?
regards,
Felipe
Sandy De Groote escribió:
We are getting many internal error messages when submitting to dspace?
We typically get
them at two places: 1. uploading the file or 2. the final page when we
click on "I grant the license."A
We are getting many internal error messages when submitting to dspace?
We typically get
them at two places: 1. uploading the file or 2. the final page when we
click on "I grant the license."Also, we are unable to
upload anything to one of our communities. We get an error on
the final page
[ I dont know nothing about pljava.so and where to put it, could anyone help me
]
Have a look in /usr/lib and you'll find a number of .so files; in manpage ld(1) it mentions,
By convention, a ".so" extension indicates a shared library.
Perhaps, the site http://www.pathname.com/fhs/ has some
Hi dspacers,
I'm trying to install pljava, necessary for UM's statistics plugin, but
I'm getting the following popular error:
*org.postgresql.util.PSQLException: ERROR: could not access file
"pljava": No such file or directory
*
doing: $ java -cp
org.postgresql.pljava.deploy.Deployer -instal
advance.
--
Van Ly : University of Sydney Library
-Original Message-
From: Van Ly [mailto:v...@library.usyd.edu.au]
Sent: Wed 14/01/2009 11:41 AM
To: DSpace-tech@lists.sourceforge.net
Subject: [Dspace-tech] error on browse by date
Hi Everyone,
I've a DSpace unable to respon
Hi Allen,
As you mentioned your database was changed. How it was changed?
+ a new metadata element (dc.description) was added to all items, this was done
by
insert into metadatavalue ( select nextval('metadatavalue_seq'), item_id, 26,
\
'This thesis was digitised for the purposes of Docum
It seems it is not a problem caused by indexing.
If the index is empty it would show a normal empty table rather than
java run-time error.
Check your dspace's log and tomcat's log to find out the error messages.
Look for what class and what function call caused the error.
As you mentioned your
Space-tech@lists.sourceforge.net
Subject: [Dspace-tech] error on browse by date
Hi Everyone,
I've a DSpace unable to respond without error to the following request:
http://ses.library.usyd.edu.au/browse?type=date
The local dspace.cfg has the following extra search.index lines th
Hi Everyone,
I've a DSpace unable to respond without error to the following request:
http://ses.library.usyd.edu.au/browse?type=date
The local dspace.cfg has the following extra search.index lines than the
default:
search.index.13 = description:dc.description
search.index.14 = department:dc
27;eperson') AS result
>
>
> Good luck !
>
> Robin.
>
>
>
>
>
> --
> The University of Edinburgh is a charitable body, registered in
> Scotland, with registration number SC005336.
>
>
> -Original Message-
> From: mikan.d.dspace listmail [
When trying to add e-person to DSpace 1.5.1 (with about 50 existing
users)I get the following error:
org.postgresql.util.PSQLException: ERROR: duplicate key violates
unique constraint "eperson_pkey"
Something seems to be wrong with epersons, but how could I try to fix
this? Where can I find the co
Dear Ilan,
Did something or someone change the path for "assetstore.dir" in your
dspace.cfg configuration ?
If nothing changed there, you should check whether your dspace user still
has rights to write on that directory.
I hope this helps you to solve your problem !
best regards,
2008/11/7 Shom
Hello everyone,
I hate having to post an error message here, hoping that someone can help me,
but I'm clueless on this one.
Our DSpace was working fine, but now, every time someone tries to upload a
bitstream we get the error message.
Can anyone at least point out what I should be looking at? Is
Hello:
I have a problema when I create a New account for Dspace, in the log file it
shows the next error:
2008-10-24 12:28:06,538 ERROR
org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/jspui].[feedback]
@ Servlet.service() for servlet feedback threw exception
java.lang.StringInd
age-
> From: Sofia Alicia Treviño Garza [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 23 October 2008 2:54 AM
> To: dspace-tech@lists.sourceforge.net
> Subject: [Dspace-tech] Error with buildfile
>
> Hello:
> I'm trying to install Dspace but when I use the buildfile it
Hello:
I'm trying to install Dspace but when I use the buildfile it send me an
error:
BUILD FAILED.
Could you please give me a solution for this error?
Thanks in advance.
Sofía
Buildfile: build.xml
BUILD FAILED
/opt/dspace/dspace-source/dspace-1.5.1-release/dspace/target/dspace-1.5.1-bu
ild.di
Hi Álvaro,
> When tryin to run the Community and Collection Structure importer
> (structure-builder), I received the following error:
>
> I could overcome the problem editing the [dspace]/bin/structure-builder
> script:
> The last line said:
> $BINDIR/dsrun dsrun org.dspace.administer.StructBuil
Hi all:
We have DSPACE 1.5, and we have 4 dspace instances running on the same
server.
When tryin to run the Community and Collection Structure importer
(structure-builder), I received the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: dsrun
Caused by: java
Hi Boubakeur,
are you using cvs to manage your sources?
Claudia Jürgen
Sahouli, Boubakeur schrieb:
> Greetings,
> In DSpace 1.5.1, when we execute " mvn -Ddb.name=oracle package", it
> generates the following error:
>
>
>
> [ERROR] FATAL ERROR
>
> [INFO]
> -
Greetings,
In DSpace 1.5.1, when we execute " mvn -Ddb.name=oracle package", it
generates the following error:
[ERROR] FATAL ERROR
[INFO]
[INFO] basedir
D:\ColNum\dspace-1.5.1\dspace\modules\xmlui\src\main\webapp does no
Hi Durga,
check the email settings in your dspace.cfg. If in general you're able
to send email, maybe the feedback.recipient is just wrong.
Hope that helps
Claudia
Durga Ratnam schrieb:
> Hi,
> Am using Dspace 1.5 on Windows XP. We have an option called 'Feedback'
> on the home page of D
Hi,
Am using Dspace 1.5 on Windows XP. We have an option called 'Feedback'
on the home page of Dspace. when i click on it, "Internal System Error" is
being displayed. Did i miss any step while installation? please help me to
solve this error.
Hoping for a quick reply,
Regards,
Durga
Greetings,
In DSpace 1.5, when we execute "mvn package", it generates the following
error:
C:\Proyectos\trunk_1.5\dspace>mvn package
[INFO] Scanning for projects...
[INFO] Reactor build order:
[INFO] DSpace XML-UI (Manakin)
[INFO] DSpace XML-UI (Manakin) :: Wing-Framework
[INFO] DSpace Kerne
I'm not sure, I've tested all the DSpace 1.5.1 releases with a clean
system (i.e.) no org.dspace artifacts in my ~/.m2/repository and they
have successfully built without compilation errors.
1.) Try 'mvn clean package' to force recompiling all the projects in
the distro from scratch.
2.)
My imediate problem has been resolved, but let me give a few details inc ase
this indicates a larger problem, or helps someone else.
After trying java versions 1.5.0-sun and 1.6.0-ibm and getting the same
error from make-handle-config, I ended up creating the handle-server config
files using dsrun
Hi there,
I am attempting to generate a handle configuration file for a new install of
v1.5.1, but make-handle-config keeps failing. The prefix and handle dir are
set in dspace.cfg, and the handle-server dir exists (owned by dspace:dspace,
set to 775). I am running the command as the dspace user,
Hi,
In my job I "inherited" a tomcat+dspace server. Dspace is version 1.42
and Tomcat 5.5 on Fedora 5. Sadly I know little about java and tomcat
:(
Although dspace is working there are several problems. For example
when searching for subjects with accents marks, it doen't search well,
for example
Hi,
Am using Dspace1.5 .Am not able to leave a message to the
administrators. To be clear, when we try to register with an unauthorized
mail id and click on 'Register' button, a message is being displayed
"Cannot Register" along with the message "Leave a message for the Dspace At
My Univers
, August 13, 2008 12:27 PM
To: dspace-tech@lists.sourceforge.net
Subject: [Dspace-tech] Error Dspace 1.5
Hi,
I have dspace 1.4.2, I try to install dspace 1.5 but i have this error message :
Unable to locate the Javac Compiler in:
C:\dspace\jdk\..\lib\tools.jar
Please ensure you are using JDK
Hi All
When I try to register the new user, system shows me the error. Anyone
here know what the problem here???
Invalid Continuation
org.apache.cocoon.components.flow.InvalidContinuationException: The
continuation ID 3423575f492c86124b485b2e6b2f80346b0a6f5b is invalid.
- context:/resource://as
Hi,
I have dspace 1.4.2, I try to install dspace 1.5 but i have this error
message :
Unable to locate the Javac Compiler in:
C:\dspace\jdk\..\lib\tools.jar
Please ensure you are using JDK 1.4 or above and not JRE. In most cases you
can change the location of your Java installation by setting the
Hi John-
Yes, there is a problem with PG 8.3 and DSpace 1.4.2; PG 8.3 changed
the default typecasting of certain literals in SQL.
DSpace 1.5.X will work with PG 8.3, and DSpace 1.4.2 will work with
earlier versions of PG.
You could also explore this:
http://people.p
Can anyone say whether there is a problem with postgresql 8.3 on
windows which would cause the error I have seen. I'm having problems
just setting up a stock 1.4.2 DSpace.
John
On Wed, Aug 13, 2008 at 9:34 AM, John Preston <[EMAIL PROTECTED]> wrote:
> So am I to take it that there is a problem wi
Try with Postgresql 8.2
2008/8/13 John Preston <[EMAIL PROTECTED]>
> Does anybody know why I would get the following error trying to run
> create administrator on a new 1.4.2 dspace installation.
>
> Exception occurred:org.postgresql.util.PSQLException: ERROR: operator
> does not exist: integer =
Does anybody know why I would get the following error trying to run
create administrator on a new 1.4.2 dspace installation.
Exception occurred:org.postgresql.util.PSQLException: ERROR: operator
does not exist: integer = character varying
org.postgresql.util.PSQLException: ERROR: operator does not
I saw this error in the log file:
2008-08-09 10:04:47,345 WARN org.dspace.app.webui.util.UIUtil @ Unable
to send email alert
java.lang.NullPointerException
at org.dspace.app.webui.util.UIUtil.sendAlert(UIUtil.java:471)
So I investigated, and I'm seeing that in UIUtil.java, the line where
Hi John,
this seems to be a known meanwhile fixed bug, see:
http://sourceforge.net/tracker/index.php?func=detail&aid=1638565&group_id=19984&atid=119984
been fixed with
http://sourceforge.net/tracker/index.php?func=detail&aid=1638569&group_id=19984&atid=319984
hope that helps
Claudia
> Hello,
>
Hello,
We're getting the error below when trying to add a submitter to
certain collections. The problem was reported before. Our problem
is following the same pattern. Is there a solution?
when I am trying to create a delegated administrator from one collection
I received the message of
Hi Keith,
> Exception:
> org.jdom.IllegalDataException: The data "Text from the item ." is not
> legal for a JDOM attribute: 0x15 is not a legal XML character.
> at org.jdom.Attribute.setValue(Attribute.java:486)
> at org.jdom.Attribute.(Attribute.java:229)
> at org.
Hello,
We have recently upgraded to Dspace version 1.5, running on a Solaris
machine using Tomcat 5.5 and Postgres 8.1. After the upgraded I'm now
getting the following internal error:
Exception:
org.jdom.IllegalDataException: The data "Text from the item ." is not
legal for a JDOM attri
-- Forwarded message --
From: Zaya Kh <[EMAIL PROTECTED]>
Date: Thu, Jun 26, 2008 at 3:29 PM
Subject: Error?
To: dspace-tech@lists.sourceforge.net
* Hello all, I installed Dspace 1.5 on Fedora.*
1. Is this error? when i shutdown apache-tomcat
[EMAIL PROTECTED] ~]# /usr/local
Dear Community,
I configured CAS with Dspace-1.4.2, and i am getting following error, how
to solve it, please give your solution,
2008-06-20 14:28:29,228 ERROR org.dspace.eperson.CASAuthentication @
Unexpected exception caught
org.xml.sax.SAXParseException: Content is not allowed in prolog.
a
I have succesfully installed DSpace 1.5 for couple of times now. Two
days ago I started from scratch and began installing an instance again.
Build is succesfull, but when running create-administrator I get the
following error:
--
Is the above data correct? (y or n): y
Exception in thread "main"
501 - 600 of 679 matches
Mail list logo