That's the message you get when you haven't installed the correct G3
extension from Newer. You need to download "NUpowr G3 v1.0.3" to run that
card. Contact me off-list of you so need.
cheers!
Greg
On 7/27/04 10:20 PM, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]&g
ell Laptop Not 2400C PowerBook"
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/
rare as the proverbial rocking horse stuff? Greg, that
ethernet card works a treat. Even humble old me managed to get it up
and going with the iBook and OSX. andybloom
Geez, don't any of you know how to search eBay? I'd rather find this
stuff on my own and not announce it to the w
m/network/>
<http://docs.info.apple.com/article.html?artnum=106658>
<http://docs.info.apple.com/article.html?artnum=106657>
<http://macguru.biz/macnetwork.html>
<http://homepage.mac.com/stjames14840/MacOS/network2macs.html>
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List,
many different
Farallon cards, not just one. Yes, I **did** read the subject line. It
did not specify *which* Farallon card.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacint
orking
components required for ethernet.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sinewar
On Jul 9, 2004, at 9:32 AM, PB Schechter wrote:
I am trying to use this card with my 2400c, and am having difficulty.
And which card would that be? What model?
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables
:
<http://www.lowendmac.com/tf/2k1129.html>
<http://docs.info.apple.com/article.html?artnum=13611>
WAY faster than USB or ethernet...
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
Disk Mode?
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscrib
;re about $0.60 each.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To
On Jun 26, 2004, at 9:20 PM, Art Rice wrote:
Hello- I tried downloading version 5.5 of Stuffit on
the Tucows website but I still get a message that the
file is corrupted and damaged.
Why don't you download it directly from Alladin?
<http://tinyurl.com/2qklz>
--
Greg G
[EMAI
<http://www.atpm.com/network/>
<http://www.macwindows.com/tutorial.html>
It's actually very easy in OS X. Make sure you're on 10.3.x as that's
much better.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans o
.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail
On Jun 22, 2004, at 4:11 AM, andy bloom wrote:
I'm intrigued... does the 2400 work with older Archos discs with the
appropriate PCMCIA card? If so, which models might be a go-er?
*Morning*, Andy:
What's an Archos disk? Pardon my ignorance. Oh, and I hope you got the
Farallon OK.
dependent upon which CDEV (Control Panel) you loaded.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http
the PCI-Powerbooks (3400c, 2400c).
I've owned three 2400C's and I used a Global Village with the GV
software on every one of them with absolutely no trouble at all, FWIW.
YMMV
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users a
Ally cardbus USB card. All I had to load was the
Apple USB Adapter Card Support.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to v
support this software, or
something like that.
Sid:
You need a modified version of the USB software that **will** install
on the 2400C. You can find that version HERE:
http://homepage.mac.com/alk/personal/stuff.html
Took me forever to find this. :-) Lucky you...
--
Greg G
[EMAIL PROTECTED
ar as
an option even though all extensions are present and engaged (but
apparently not active). What am I doing wrong?
If the OS can't see the card, it won't let you have ethernet. You need
to load the right drivers and use a card that is compatible with the
2400C.
--
Greg G
[
On Jun 16, 2004, at 12:27 PM, Carlson wrote:
Time to go back to 8.6! I'll have to give it a try.
This makes it MUCH easier:
http://www.marcmoini.com/C-IAssistant.html
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans o
ed to
understand the detail in the listing. I sold a 20 AMP PDU and
specifically listed it as such. I got bad feedback when the buyer
realized he couldn't plug it in to a normal 15-amp outlet. There were
even photos in the listing of the 20 amp plug.
--
Greg G
[EMAIL PROTECTED]
--
Duo
On Jun 16, 2004, at 10:36 AM, Carlson wrote:
You still can't boot with a card in, can you, with 8.6?
Yes, absolutely. USB, FireWire, 802.11b, or ethernet. It boots with any
combination. I did my own CardBus mod after much research. AFAIK it's
the "MCE mod."
--
Gre
he should be able to prove it.
Or he just copied the text from another listing, which is more likely.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.
to remember what you need -- but your Cardbus upgrade is working.
I found this to be true in OS 9.1. Once I downgraded to OS 8.6 and
installed the correct USB & FireWire software from Apple, my Comet is
stable as bedrock.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest
y
selling a 2400C a few weeks ago with a G3, 512mb ram, and a 15" LCD.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
?
Yes, it works.
Yes, it's a great card.
It's not CardBus, so it works in all 2400C's. I have one or two brand
new available as well, with sealed software and cable.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fa
g all your network prefs, like TCP/IP prefs and Appletalk
prefs. If this doesn't work, I suggest you reload the OS and do a
custom install, selecting to install only the network components.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for
ching, but without a modem, transfer of files is a
bit of a problem. Help, please.
Try using the drivers for one of the other USR cards, found here:
<http://www.usr.com/support/drivers-template.asp?prod=s-pccard>
Does the Apple Modem CP or ARA see it?
--
Greg G
[EMAIL PROTECTED]
--
Du
Ion's aren't as bad as NiMh or NiCad, but still...
Also, check out Jeremy Kezer's excellent shareware apps:
<http://www.kezer.net/shareware.html>
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac
But I'll still give you $50
for it. ;-)
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http:/
It's toast. I'll give ya $50 for it...
;-)
On Jun 8, 2004, at 9:29 PM, [EMAIL PROTECTED] wrote:
This evening, coming down with a cold and more tired than usual from
leaving
the office, i dropped my beloved 2400. It was in a
not-as-padded-as-it-could
be computer briefcase, and hit the hard floor h
Cads.
I have 2 2400C batteries that each run for 2-3 hours. I'll be listing
them on eBay soon enough...
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoLi
off the
AC supply, this isn't likely. Can you power up from AC?
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac
lightning bolt for about 20-30
seconds.
Any ideas?
Sure, it's time to buy a new battery. Assuming, of course, that you
know for sure that your charger works. ;-)
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans o
Anyone have the black phillips-head 2x8mm screws used in abundance in
our beloved Comets? I'm in need of a half-dozen or so, give or take.
Also looking foe Apple pn 922-2985 screw covers.
Please email me off-list. TIA
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest
fuse diagnoisis
and replacement) and software upgrades as well (by quotation).
Here's the software link. THANKS ANDREW!!!
<http://homepage.mac.com/alk/personal/stuff.html>
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and f
OOPS
Never mind. The Farallon just can't see any channels other than 10 or
11. Works like a champ now.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.c
ing v3.1 Farallon driver. v2.1 didn't work either.
HELLLP
TIA
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure t
hat's your router IP address? Have you tried switching AppleTalk on?
On May 25, 2004, at 8:58 AM, [EMAIL PROTECTED] wrote:
--
Greg G
[EMAIL PROTECTED]
Thanks for the hints.
Here are some specs:
My 2400c runs OS 9.1;
I'm trying to connect using DHCP
The address(es) that show up (all) do
Try setting all of your TCP/IP settings manually (IP address, subnet,
router address, etc.). Did ethernet work before?
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com
Great resource, except for the fact that the Farallon FTP site is
apparently dead. :-(
--
Greg G
[EMAIL PROTECTED]
On May 21, 2004, at 7:56 PM, Edgar Peinelt wrote:
Lars,
point your browser to
http://www.macdrivermuseum.com/network.shtml
- they have the links you need.
Do you really have a dock
You can find downloads here:
<http://www.proxim.com/support/all/maccard/software/index.html>
--
Greg G
[EMAIL PROTECTED]
On May 21, 2004, at 2:52 PM, Lars Lincoln wrote:
Hello fellows
I can´t get my ethernet-card working, it´s a Farallon PN590A installed
in a Duodock. I don´t have a driver
Lars:
I have a Farallon PN595a card and software. I can email you the driver
off-list if you want to try it. I also have a second card for sale.
It's brand new and sealed.
--
Greg G
[EMAIL PROTECTED]
On May 21, 2004, at 2:52 PM, Lars Lincoln wrote:
I can´t get my ethernet-card working, i
rding the 2400
CardBus modification? I'm willing to modify my Comet as long as I don't
screw anything up. THX
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themaci
Can anyone recommend specific PCMCIA FireWire and/or USB cards that
will work in a non-modified 2400C?
Thanks in advance!
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <h
I have a MiniStor 89mb PCMCIA drive... will that work for you?
--
Greg G
[EMAIL PROTECTED]
On May 15, 2004, at 6:01 PM, R. McFarlane wrote:
Hi there,
If you have the aforementioned item available or know of where
one can be found, please let me know.
The PCMCIA (PC Card) must be
mount
from this list.
???!
What the...
You're welcome, and thanks for your attitude... I think.
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac s
feelin' the "2400-Wizard" vibe as much!)
Atlanta GA
Craig:
Check out this site; perhaps it will help.
<http://home.socal.rr.com/midijab/>
--
Greg G
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subpo
On May 12, 2004, at 12:34 PM, [EMAIL PROTECTED] wrote:
Wow... I am not even SURE what that means! I take it those little
square
dealies on the board are the fuses, but how do I check them?
I can (now) stip a 2400c down to the processor and rebuild it to work
again,
but I have not crossed over y
, there is no guarantee the 2nd processor was any good either...
Does anyone have any other ideas of what it could be? And don'tcha
wish there
was a "Cranial Screw-Top" procedure for getting into the "Mighty
(Complicated) Cat?"
Check fuses on the mobo?
--
Greg G
[EMAIL PROTE
supplynet.com/>
which I discovered courtesy of the list's Captain Drew Johnson (Thanks
Cap).
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ
On May 5, 2004, at 1:10 PM, Edwin Morrow wrote:
Thanks Greg for suggest JPEGViewer. That's the one I remember using
some years ago.
Do you or anyone else know of a similar application that plays,
converts Mpegs and
where I can find it? Something similar to JpegView that allows you to
nyone have
a copy or know where I can get one. I think it was even called
___Viewer or
something like that.
Much thanks in advance,
JPEGView
<http://www.versiontracker.com/dyn/moreinfo/macos/2278&vid=33219>
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest plac
the one of the two I'm replacing for half that. They work, but
I wanted to install new ones since I got them so cheap.
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themaci
On Apr 6, 2004, at 1:07 PM, Azamat Farrakhov wrote:
Hi, I'd like to add small note regarding fuse; as noted it located on
back
side of PB2400c [REMOVED] mother/logic board, but if you open you
laptop
and remove keyboard, this fuse (marked as "F2") viewable on top (and
center) of UNREMOVED logic
out SCSI adapters
while powered up (a big no-no). It's a flea-sized SMD 2 amp fuse on the
back side in the center of the mobo. If you're not handy soldering and
taking apart PowerBooks, time to send it out for repair... or sell it
for parts.
--
Greg
[EMAIL PROTECTED]
--
Duo
On Mar 26, 2004, at 5:08 PM, Tom and Lisa P wrote:
It turns out that the power board has a bad SCSI connection somehow. I
put another powerboard on the 2400 and the external SCSI works fine.
I dsont know how the connection can go bad, but I will have to take a
close look at it.
Probably one
;t work." Moral: Use CIA, or save copies of all your
third-party stuff.
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
pose HDI30 SCSI adapter, make sure the
switch is in the SCSI position, not the Dock position.
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
hi Craig
Sounds like you're the man! Here's two helpful sites:
http://www.genchan.com/
(go the the 2400c section, then CPU upgrades)
http://members.aol.com/kim/computer/duo/2400cpu/2400upgrade.html
And keep REAL good track of the screws. That's key.
cheers!
Greg
On 3/17/04 6
#x27;t load the Apple CD
Extension, the Iomega extension, or any other 3rd party CD driver. It's
always worked perfectly for me.
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.th
and 9.2.2 updaters and use them as well.
cheers!
Greg Reimer
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/ma
On Feb 21, 2004, at 9:12 AM, Robert JA Basilio Jr. wrote:
I have a 2400 180/48 MB running OS 8. What kind of extension file/app
do I
need to install so that it will read my PC 1.4 MB disk? This same disk
is
read by my Mystic Color Classic. But when I insert the very same disk
into
my 2400's flo
u'll see a drop down box, select Memory.
There will be a "minimum" and "preferred" window. Allocate a chunk of
memory (way more than the default) and then launch Excel. If it
launches, you fixed the problem. I'd definitely find a legal,
licensable copy of O
enough memory allocated to it to run. (Get Info, Memory, and allocate a
bunch of RAM to it) Or turn Virtual Memory on and see what happpens.
Also, restart and rebuild the desktop (hold down Apple+Option).
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A
don't you just reinstall Excel? (You **are** the legal owner
and have the install disks, right?)
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListF
ask
if anyone with more experience than I can give advice on what else may
cause the GLOD.
Green Light of Death, Click of Death, Comatose...Resurrection
http://webobjects.uwaterloo.ca/mac2400/power_reset_by_sydney_ho.htm
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest pla
On Feb 11, 2004, at 9:42 AM, Dan K wrote:
Using just one iron you have to keep moving back and forth to work the
bloody thing loose, but with two you can (obviously :-) touch an iron
to
both ends simultaneously and just lift the fuse (or
CPU-multiplier-jumper-resistor or whatever) right off. I ha
Mouser does not.
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E
On Feb 10, 2004, at 1:27 AM, Gaetano Cau wrote:
Dear Sirs,
I'm looking for the trackpad cable of a powerbook 2400c/180.
Can somebody help me and sell it to me?
Thanks rgds
http://www.powerbookguy.com/2400.html#serviceparts
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest
On Feb 9, 2004, at 11:37 AM, Robert JA Basilio Jr. wrote:
What's a good and cheap solution to make the 2400 run less hotter?
Thanks.
Turn it off. :-)
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
F
if you can!
It's all here:
http://home.socal.rr.com/midijab/
Steady hands and a good magnifier help. Easy on the coffee.
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themaci
ystem software CD in the CD ROM drive.
I'm at a loss.
You may have a blown SCSI Term Power fuse on the motherboard. It's a
flea-sized SMD fuse under the processor on the underneath side of the
logic board. Got an ohmeter, a #1 Phillips, and a T-8 Torx?
--
Greg
[EMAIL PROTECTED]
Correction: CD-Sunrise is FREEWARE:
http://hyperarchive.lcs.mit.edu/HyperArchive/Archive/cfg/cd-sunrise
-22c.hqx
--
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/li
our search
online, I couldn't find any
*anywhere*!
Anyone out there with the drivers for this unit? I thought that I
might get lucky, as this unit
was made for PowerBooks exclusively...
You can use a shareware extension called "CD-Sunrise." It works on
nearly every non-Apple CD-RO
at as
an
emergency disk? Thanks.
Wouldn't it be easier (and cheaper) to just buy a 2400C FDD??? They're
selling on eBay for $10 or less all the time.
You can also get an HDI30 SCSI adapter and an external CD-ROM.
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest plac
If anyone has a dongle for a Global Village 56kbps modem/10 base-T
ethernet card (model#A959), I'd like to buy it. I received a 2400C with
a card but, alas, no dongle.
Please contact me off-list. THANKS!
Greg
[EMAIL PROTECTED]
--
Duo/2400 List, The friendliest place on the N
specifics, but he
didn't get very far with it. I
think the Mighty Cat was able to achieve higher speeds...
From what I've read, 200mhz is about "it," so I think I'll leave mine
stock for now. Best to max out the RAM and get a fast HD. ;-) Thanks.
Greg
[EMAIL PROTE
Hello All:
New to the list, but not to Macs, Comets, or soldering tiny little
parts. I've seen mention of overclocking the 2400C here, but no
details. Can someone point me in the right direction? Thanks!
Greg
--
Duo/2400 List, The friendliest place on the Net!
A listserv for user
hi all
I have a 2400 that won't wake from sleep. OS 8.6, Newer G3/240, 80MB
RAM. The hard drive spins up, but it won't move past the gray screen.
any ideas?
thanks
Greg
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FA
anks for all the help everyone!
Greg Goodwin
@><-- >
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <
Anyone have any Duo 280 memory for sale? I think I currently have 12 meg. :)
Greg Goodwin
@><-- >
-Original Message-
From: Roberta Seifert, Ph.D. [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 04, 2003 8:50 AM
To: Duo/2400 List
Subject: [Duo24
Have you tried taking the batteries out and trying to power them one while plugged
in?
Sometimes a battery can be so dead that it sucks a lot of power to the point
that there is not enough to power on.
-Original Message-
From: Kenneth T Van Wie II [mailto:[EMAIL PROTECTED
Replace the modem with a ethernet port? Now that would be cool!
-Original Message-
From: Frank Cornew [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 30, 2003 1:47 PM
To: Duo/2400 List
Subject: [Duo2400] Etherdock
Inquiring minds want to know...Do not resist your urges, Igor...
rsday, October 23, 2003 11:01 PM
To: Duo/2400 List
Subject: [Duo2400] Re: Reply from Portrait Displays on MacPortrait Fwd:
RE: Tech Support
--- "Goodwin, Greg" <[EMAIL PROTECTED]> wrote:
> I tested this last night, and it works fine on
> a System 8.1 Duo 280c. I just wi
I tested this last night, and it works fine on a System 8.1 Duo 280c. I just
wish they would pivot the track ball. :)
Greg Goodwin
@><-- >
-Original Message-
From: Gregg Eshelman [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 23, 2003 1
Duo Dock compatible? :)
-Original Message-
From: Harbourmaster [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 22, 2003 5:33 PM
To: Duo/2400 List
Subject: [Duo2400] New iBooks with G4 Power!
Whoo Hooo !
Apple announced today new iBooks with a G4 processer!
Check the Apple web
ailto:[EMAIL PROTECTED]
Sent: Wednesday, October 22, 2003 7:46 AM
To: Duo/2400 List
Subject: [Duo2400] OT: Galactic Guide Re: [Duo2400] Re: More on
MacPortrait Re: [Duo2400] Re: Screen rotation?
--- "Goodwin, Greg" <[EMAIL PROTECTED]> wrote:
> Got the appletalk work
w.galactic-guide.com/downloads/index.shtml
Greg Goodwin
@><-- >
-Original Message-
From: Gregg Eshelman [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 21, 2003 11:40 PM
To: Duo/2400 List
Subject: [Duo2400] More on MacPortrait Re: [Duo2400] Re: Scr
How much will you be selling that for?
@><-- >
-Original Message-
From: Gregg Greenwood [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 21, 2003 8:51 AM
To: Duo/2400 List
Subject: [Duo2400] How and where do we post a Duo for sale?
I subscribed to this list
idea if this works on less than a 9 system? If you don't
know, I'll give it a whirl later.
Any additional software requirements?
Thanks!
Greg Goodwin
@><-- >
-Original Message-
From: Dan K [mailto:[EMAIL PROTECTED]
Sent: Monday, Oc
e Mac. This is a silly
question.. there has to be by now. But what would you all suggest?
Thanks!
Greg Goodwin
@><-- >
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.th
es to find them, etc. Thanks!
Greg Goodwin
@><-- >
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to
Perfoma. Or maybe I was just
really happy when the Duo stared picking up on the DSL network, and did Appletalk.
Now that was cool.
Thanks for the advice on this one.
Greg Goodwin
@><-- >
-Original Message-
From: Gregg Eshelman [mail
r_N-C/MacTCP_2.0.6_Update.sea.bin
Macintosh/Networking-Communications/Other_N-C/MacTCP_2.0.6_Update.txt
Macintosh/Networking-Communications/Other_N-C/MacTCP_Token_Ring_Ext._1.0.sea.bin
Macintosh/Networking-Communications/Other_N-C/MacTCP_Token_Ring_Ext._1.0.txt
-Original Message-
From: Goodwin,
0 octubre, 2003, a las 04:06 PM, Goodwin, Greg escribió:
>
> This I tried. 1.1.1 installs a bunch of junk, and the Mac/TCP says
> that Open Transport has not been activated. 1.1.2 says that it needs
> at least 1.1 to install.
> This would lead me to believe that 1.1.1 and
This may sound like an odd question, but is there a program out there that lets
you rotate the screen 90 degrees?
The idea here is you have a laptop the size of a book. It would be nice to open
and read from it as you would a book.
Thanks!
Greg Goodwin
Greg,
It's ages since my last Duo was gone, but here's what I can remember:
a) If you have system 8.0 or 8.1, they include OT 1.2.
>> May have to try my copy of System 8.1... seems a bit extreme though.
b) If you have 7.5.5 or 7.1, you can install OT 1.1.1 and then OT 1.1
. Free is good, but if it wasn't, where did you buy it?
Thanks!
Greg Goodwin
@><-- >
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lis
night).
I have yet to get a 7.5 system to talk to a appletalk network.
Hopefully getting this Duo 280c to talk to the 9.22 system will be easier than my
Newton 2000 has been. :)
Take care!
Greg Goodwin
@><-- >
--
Duo/2400 List, The friendlies
1 - 100 of 234 matches
Mail list logo
