,
previous down loads have been successful, and I am getting the same
results on my main computer and my laptop.
Thank you
Barry G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
There's a new version out, 6.1.2. I have it running with my KX3. Try it
and see if you still have a problem
73,
Barry
K3NDM
On 9/3/2013 8:09 PM, Bill wrote:
I don't think these issues are a priority to the HRD folks. They have
been well known and documented for a very long time and were among
verticals. Almost everything is available from Home Depot except the
tuner and a few insulators. I hope this has triggered some curiosity.
73,
Barry
K3NDM
On 9/2/2013 7:10 PM, Jim Brown wrote:
43 ft verticals have become a popular antenna, and while they have
some strong points, they present
George,
Let me suggest that move your tuner to the base of the vertical. It
shouldn't make a big difference in tuning, but will cut your losses due
to SWR, particularly on 15.
73,
Barry
K3NDM
On 9/2/2013 8:49 PM, gos...@twcny.rr.com wrote:
Hi Jim !!
I have a ZeroFive 40 meter monoband
, it was 1.2 msec!
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Re-Keyer-weighting-tp7578120p7578147.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http
fed
by a 80ft doublet antenna, I hope that you and others find a cure to the
problem.
53 de Barry G4DBS
On 15/08/2013 17:00, elecraft-requ...@mailman.qth.net wrote:
Fra: Paul Barlowpaul.bar...@upcmail.ie
Til:elecraft@mailman.qth.net
Sendt: Torsdag, 15. august 2013 12.52
Emne
of doubt, the KAT500 changes bands automatically when I
use my K3.
Barry Simpson VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
guess the best advice is find an old community with no antenna
restrictions. If that is not possible, pick your house carefully.
73,
Barry
K3NDM
On 8/13/2013 7:54 AM, stan levandowski wrote:
I have a nonresonant-in-any-ham-band 44' doublet in my attic peak at
31' above ground. Only 26' is actually
and the KX3. Those notes are very informative and I suggest you do a
review of them. They are applicable to all digital modes. I know I
learned something that I had overlooked.
73,
Barry
K3NDM
On 7/20/2013 11:55 AM, Stephen Selberg wrote:
Hi Stephen,
I used my kx3 for jt65 once when I first got
driving the radio so that the distortion is too high for
the other guy to demod and decode; you really need to keep your transmit
levels well within the linear region of your transmitter. That means
don't allow the ALC to kick much and NO compression.
73,
Barry
K3NDM
On 7/17/2013 8:32 PM, Don
issue with interfacing with my collection of
stuff. I kinda feel I'll take the path of least grief even if it takes
a few extra bucks. Best of luck.
73,
Barry
K3NDM
On 7/18/2013 11:10 AM, Ariel Jacala wrote:
Barry and Don
I have the Signalink USB. However I have it dedicated to the K2
Don,
I've lucky so long that I've totally forgotten that point. It's
really bad when you get old. :-)
73,
Barry
K3NDM
On 7/18/2013 11:31 AM, Don Wilhelm wrote:
Ariel,
Nothing wrong with that plan at all. Bond the computer and the KX3
together and power everything from the same AC
This thread seems to have gone off-track. I read the posting on Nabble. I
don't receive individual (or digest) emails. Simply browsing through the
recent postings on Nabble is a real PITA due to all the recent spam
postings. These posts have NOT been forwarded to those reading via email.
My
Tnx
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Any-way-to-block-the-spammers-who-discovered-Nabble-recently-tp7576545.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
during Field Day if you operate QRP. You
can end up being more than competitive this way. That's my opinion and I
don't care what the QRO guys say.:-D
73,
Barry
K3NDM
On 7/2/2013 9:18 AM, Fred Smith wrote:
I guess I never counted Field Day as a contest 8)
73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 2573
for elevations in excess of 1/10 wavelength, and preferably a bit more.
Impedance of the antenna is totally unimportant as the ATU takes care of
making sure your transmitter sees a proper load.
73,
Barry
K3NDM
On 7/1/2013 12:49 PM, Mike WA8BXN wrote:
Randy,
I think elevated radials need
conditions are good, you
should expect to really reach out and touch other hams a long way out.
Congrats and best of luck!!
73,
Barry
K3NDM
On 6/19/2013 2:08 PM, KE7HGE wrote:
I finished assembling my KX-3 late last night, and started playing this
morning. My first contact was checking
also run some DSP demods like
MixW simultaneously and that periodically cause some problems. On that I
need to be careful of loading order. Other than that I've had little
problems except not enough monitor space to see everything at once.
73,
Barry
K3NDM
On 6/14/2013 10:03 AM, Kenneth
Maybe a component in your Astron is aging. I have a 70A Astron that's over
20 years old and it's slightly warm, but that's it.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Power-Supplies-for-K3-tp7575122p7575146.html
Sent from the Elecraft mailing list
LIke you, I operate very little SSB. I use the MH2 with fine results (when I
can find it). I set TX EQ to cut some of the lows and add to the highs for
punch.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Microphone-for-the-K3-questions-tp7574865p7574903
please give some thought before making
critical and sarcastic comments about competitors' equipment that you have
not used. I have not seen any similar type of comments on Kenwood
reflectors regarding Elecraft equipment.
I also have a KPA500 and KAT500 and previously built a K2.
73
Barry Simpson
And I can't even get my own callsign correct
73 again
Barry Simpson VK2BJ
-- Forwarded message --
From: Barry Simpson vk...@optusnet.com.au
Date: 5 June 2013 06:57
Subject: Re: [Elecraft] TS-990
To: Phil Hystad phys...@mac.com
Cc: elecraft@mailman.qth.net elecraft
How effective or necessary is a PR6 preamp for 6m operation? Is thing
specific to installing and configuring the PR6 on a K3?
Thanks 73,
Barry K6ST
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
in hearing the details of such a
setup.
Tnx,
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Question-for-those-using-a-K3-100-as-a-transmitter-and-a-remote-station-terminal-tp7573944.html
Sent from the Elecraft mailing list archive at Nabble.com
I thought you would be GIVING them away in Dayton, not SELLING them :.(
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Elecraft-Hats-at-Dayton-tp7573660p7573733.html
Sent from the Elecraft mailing list archive at Nabble.com
I know this was discussed WAY back when in the earlier days of the K3.
I need a felt washer, the type that sits between the vfo tuning knob
and the front panel. Can anyone suggest a local source?
Thanks 73, Barry N1EU
__
Elecraft
Thanks Joel, great idea!
73, Barry N1EU
On Sun, Apr 14, 2013 at 2:12 PM, Joel Black w4...@charter.net wrote:
You can get felt washers at Walmart. Go to the automotive batteries. I don't
know if the hole would be too big or not, but you can try it and see.
73,
Joel - W4JBB
On 4/14/13 8:42
Did a firmware update this morning. After I awoke from my nap, it was almost
done.
Seriously, why only 38.4K? Makes me think back to the DOS days and Hayes
modems.
--
View this message in context:
to
the line. Does that slow it down?
Barry W2UP
P.S. Apologies for not IDing in my original post - an oversight.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Why-is-the-serial-data-transfer-rate-so-slow-tp7572129p7572148.html
Sent from the Elecraft mailing list archive
with Kenwood equipment so that it changes at the same time as the
KPA500 ?
I await any responses with interest.
Thanks and 73
Barry Simpson VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hi Dick
Thank you very much for your detailed explanation.
The methodologies for the auto band switching of the KAT500 are too complex
for me so I will have to stick with the RF sensing, except of course when I
use the K3 !!
Thanks again for your response. It really is appreciated.
73
Barry
I use a 20 inch wide screen wall mounted. I have 4 monitors on my wall. 2 for
my computer, one for the P3 and one for my XYLs computer. They are all tied in
so either of us can use the radio with computer control. Station pic at my
QRZ.com page
barry
NF1O
in anticipation of help.
73
Barry Simpson VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Thanks Gary
I have messed and fiddled and fiddled and messed and have now swapped the
two DB15 cables back again. For whatever reason, it has now started to work
OK again. I don't know why !!
I will keep my fingers crossed that it keeps working.
73
Barry VK2BJ
On 18 March 2013 08:42, Gary
last five will include a lightning storm over my house or someone like
W3LPL moving next door.
73,
Barry
K3NDM
On 3/13/2013 9:49 AM, Wayne Burdick wrote:
No need to speculate. There is no such project underway at Elecraft.
Direct RF-sampling receivers, for all their technology, still lag well
Joe, you may be right, but the description of the Revision C mod says, This
modification protects the K3's audio amplifier if either speaker output is
connected to a short circuit or very low impedance load.
Since I've made this mod, I'd like (hope) to know that this protects the audio
amp.
Don, Joe --
Don,
You missed my point. of confusion, Joe said open circuit.
Yep, I do use a stereo plug, thus I have an right channel open circuit when I
connect an external
speaker.
But there seems to be something else that Joe is warning against other than
open circuit. Referring to
I agree. Also, too many years of using VFO B and a wide filter to track the
DX station's listening pattern.
Barry W2UP
Deni F5VJC wrote
I can not say I find the P3 is at all useful in chasing DX, NOT the fault
of the P3 of course, it's the abysmal operating procedures of those
continuously
quality.
A very satisfied Elecraft user
Barry G4DBS
K2/10, K2/100, KX3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
. Any ideas of what I am up against or how to solve the problems is
greatly appreciated.
Thanks 73,
Barry K6ST
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
care of many
bad estimates and low loss feed lines mask many mistakes.
73,
Barry
K3NDM
On 2/14/2013 1:29 AM, Ron D'Eau Claire wrote:
If you like to use it for chasing DX on 10 meters, you'll get better results
with a slightly shorter radiator - something about 42 feet overall. That's
because
Do you mean put the amp in standby to operate barefoot or put everything in
standby?
If everything, you could use the TX TEST button (hold the right side of the
Mode switch.)
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Can-I-switch-between-Operate-Standby
.
I have worked with a number of boat owners who sail in blue water.
My suggestion to them is that they have both a marine SSB and a ham
radio on board. My thinking on this is redundancy for safety at sea.
73,
Barry
K3NDM
On 1/21/2013 2:31 AM, Dietmar Otterstaetter wrote:
Hy @ all,
I
John,
I have used VOX for PSK-31. It does work. You just need to be
mindful of your settings and the power output.
73,
Barry
K3NDN
On 1/10/2013 3:57 PM, K7JLTextra wrote:
If the VOX could be used in data modes it would greatly simplify the computer
interface. Is there something here I
owner actually, i
share with NE1F)
73
Barry
NF1O
From: KR9A k...@gmx.com
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 105, Issue 14
Message-ID: 50ed9bab.6030...@gmx.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I am wondering if anyone has used
://www.youtube.com/watch?v=sMFp1P8Qhsglist=PLB5BFA015F6E930AE
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Suggested-key-paddle-for-CW-for-a-the-K3-and-others-not-expensive-tp7568276p7568300.html
Sent from the Elecraft mailing list archive at Nabble.com
on
paper (though I believe they are now transitioning to laptops for copy).
Ken, KE3X wrote a very interesting article about HST and some of the
training in the PVRC newsletter. See here:
http://www.pvrc.org/Newsletters/dec11.pdf
Barry W2UP
How many dual paddles do you note in these clips?
73,Rick
rate them equal to N3ZN in
terms of quality. In my opinion, the Bencher BY-1 is just awful - way too
much play in the levers.
Theink of paddles like power windows. If you've nver had them, you won't
know what you're missing. Once you get them, you never want to go back :.)
Barry W2UP
--
View
keyer, but use the dual lever paddle,
when sending numbers only.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Suggested-key-paddle-for-CW-for-a-the-K3-and-others-not-expensive-tp7568179p7568272.html
Sent from the Elecraft mailing list archive at Nabble.com
I'd like to see the tuning rate accelerate after a few turns of the knob.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-suggestion-tp7568165p7568273.html
Sent from the Elecraft mailing list archive at Nabble.com.
, the
lighter and more rugged KX1 has become my winter go-to radio. I'll switch
back to the KX3 when the weather improves.
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
-- Forwarded message --
From: Barry Simpson vk...@optusnet.com.au
Date: 3 January 2013 09:04
Subject: Re: [Elecraft] K3 Sub Receiver Problems
To: DR kg...@sbcglobal.net
Hi Dave
You need to engage B Set before pressing any of the other functions. This
will enable you to turn
.
Barry W2UP
David Windisch wrote
Hi, all concerned:
In my not so mumbled opinion, if everyone would:
1. read msgs *online* from Nabble *only*, and
2. post *online* only to the official Nabble sub-groups, and
3. on the subject line, enclose the official Nabble sub-group's name
Tnx for the info, Dave. When I joined the list a few years ago, everything
went into its proper subfolder, and I just assumed it was an automated
process.
As Elecraft products continue to grow in number and popularity, a single
list will become more and more unmanageable over time.
73,
Barry
I remember having the same problem when I built my K3 about four years ago.
It was never going to work without an additional washer which is what I
installed.
73
Barry VK2BJ
On 29 December 2012 02:31, Josh Fiden j...@voodoolab.com wrote:
I tried that first. In my case it resulted in what I
I have found Screw Grab helpful for situations like this:
http://www.screwgrab.com/screwgrab.html
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Problem-with-a-K3-screw-suggestions-needed-tp7567729p7567750.html
Sent from the Elecraft mailing list archive
do that, your KX3 becomes a really GW, gee whiz, radio.
Best of luck.
73,
Barry
K3NDM
On 12/23/2012 11:14 AM, Edward Dickinson III wrote:
You might give NaP3 a try.
Dick - KA5KKT
I have the KX3 and wondering which is the best software for I/Q operation
recheck those.
73
Barry VK2BJ
On 22 December 2012 02:42, Ron W3ZV w...@verizon.net wrote:
It appears that I am the problem. Somehow I have messed up a perfectly
good KPA500 kit.
I purchased the cable kit for the KPA500. I have the 15 pin cable
connected from the K3 to the KPA500. The major
I know the cost is much greater, but the KX3 makes a fantastic SDR. I've
been using it with a good sound card and am extremely pleased. I can see
where this one radio could solve a large number of requirements in a
single small box. Check out Sherwood's data on radios.
Barry
K3NDM
On 12/14
slowly going through the operating manual getting it set
up to my liking, I will be taking it to my local radio club soon in the
hope that other members will like it and want to buy one. Thank you
Elecraft for a first class radio.
73 de Barry G4DBS
12.30 UTC. I really was not expecting it until after
Christmas, well done everybody. Yes it looks as if I have drunk the
Elecraft Koolaid, I am hooked. May I wish everybody on this list a very
happy Christmas.
73 de Barry G4DBS
2 K2's and now a KX3
bought several from him over the years.
I needed some help with a CMOS Superkeyer III about 10 years ago and never
got a response to my query. Will never buy from them again. Pathetic
customer service!
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/OT-IDIOM
wayne burdick wrote
- FN1-FN8 can be used for various P3 functions as well as for
controlling the K3 (such as one-tap band switching).
Details on one-tap band switching, please.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Still-More-P3-Details
without the rig inserting extra cw elements. I decreased speed to 18wpm,
but it still was VERY problematic.
Appreciate any advice on making the KXPD1 more reliable.
73,
Barry N1EU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX1-KXPD1-tips-tp7566586.html
Sent from
in recent years
is the FT2000 which is one of the reasons I have never owned one.
73
Barry. VK2BJ
Sent from my iPad
On 24/11/2012, at 11:15, Scott Manthe scott.man...@gmail.com wrote:
I've heard of this problem, but have never actually heard the problem on my
K3, which has a serial number
/R-100597822/h_d2/ProductDisplay?catalogId=10053langId=-1storeId=10051
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Desk-Top-Stands-tp7565885p7565888.html
Sent from the Elecraft mailing list archive at Nabble.com
corrected and seems to be working perfectly.
It also does not seem to introduce any loss whatsoever, just like the K3
built in ATU. I don't know how Elecraft do that as both my Kenwood rigs
have significant losses in their ATU's as did my previous Yaesu.
The mojo is still working.
Barry VK2BJ
great. Please let me know how you go on.
73
Barry VK2BJ
On 16 November 2012 21:33, Fred Jensen k6...@foothill.net wrote:
On your K3, go into CONFIG:TUN PWR and set the tune power to 25 watts.
The KAT500 takes about 20-25 watts to tune. Most of us had TUN PWR set
at 5W or close for the KAT3
My factory assembled KAT500 s/n 0093 arrived here yesterday.
I am yet to connect it up but it looks very nice indeed.
Barry VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
alternatives to Nabble for better noise reduction?
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/How-come-Nabble-doesn-t-sort-any-more-tp7565460.html
Sent from the Elecraft mailing list archive at Nabble.com
interests.
Barry W2UP
Mike-14-3 wrote
Barry,
Any e-mail program has the ability to sort posts into folders via rules
you set up. You might run into the same issue tho, if folks don't use the
proper words in the subject. I fervently dislike web interfaces. . ..
73, Mike NF4L
On Nov 11
Will this be the same algorithm that is used in the KX3? The one in the
KX3 seems to work pretty well.
73,
Barry
K3NDM
On 11/8/2012 12:00 AM, Wayne Burdick wrote:
Hi all,
We have a new field-test K3 firmware release (MCU 4.58/DSP 2.80) that
offers improved CW text decode. The improvement
U;ve seen it on occasion with my poorly matched wires. Press the Auto Tune
button and it will go away.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Hi-Cur-tp7564940p7565005.html
Sent from the Elecraft mailing list archive at Nabble.com
in the
Oceania CW Contest.
73
Barry VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
of construction
quality, comfort and tx/rx audio quality, is the Beyerdynamic DT-109.
73,
Barry N1EU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Need-Headphone-recommendations-for-K3-tp7564758p7564884.html
Sent from the Elecraft mailing list archive at Nabble.com
I use the Icom SM20 and am very happy with it.
Barry VK2BJ
On 1 November 2012 18:01, Jim and Ann anniema...@aol.com wrote:
Looking for recommendations for a desktop mic for the K3 -- anybody?
K1GND Jim
__
Elecraft mailing list
and see what happens.
73,
Barry
K3NDM
On 10/31/2012 10:07 AM, Jim Sheldon wrote:
Has anyone with a KX3 successfully interfaced the HDSDR program to be able to
use it for control and spectrum display? Not having much luck here. My
laptop does have a very good integrated stereo soundcard
for me and other hams that have tried it. Don't get too spun up if the
SWR does not get to 1:1. The issue will be is the SWR within the
requirements for your transmitter. If the transmitter doesn't care and
you do as I suggest, you don't care either. Happy DXing!!!
73,
Barry
K3NDM
On 10/26/2012 8
range with SWRs up to about around 10:1. This just
isn't worth all of the fiddling, IMHO. I try to always adhere to the
KISS principle.
73,
Barry
K3NDM
On 10/26/2012 2:23 PM, Bob Stephens wrote:
What is the significance of using RG11 75 ohm coax vs 50 ohm? Sorry if this
is a dumb question
Thanks for the reality check Lyle!
73,
Barry N1EU
On Mon, Oct 22, 2012 at 2:49 AM, Lyle Johnson [via Elecraft]
ml-node+s365791n7564436...@n2.nabble.com wrote:
Not yet, but soon.
Lyle KK7P
Sent from my iPad
On Oct 21, 2012, at 5:51 PM, Barry N1EU [hidden email] wrote:
I don't see the AF
these headsets work well on VOX.
73/GL,
Barry N1EU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7564393.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
I don't see the AF Limiter (AF LIM in menu) listed as not implemented in
the Errata sheet, but it doesn't seem to be working in USB with AGC off
(v1.23).
Anybody using the KX3 AF Limiter successfully?
73,
Barry N1EU
--
View this message in context:
http://elecraft.365791.n2.nabble.com
the lash up is. When using the
KX3's IQ, I turn down/off the radio's audio and do EVERYTHING on my
laptop. I do use the line in to my laptop when I want to use the radio
as intended but want greater audio than is available from the radio's
speaker. What am I missing??
73,
Barry
K3NDM
On 10
Jeff,
I don't know what problem you're having, but I run without any
additional isolation with no problem. I go directly from my KX3 IQ out
to my soundcard. Try it and see if you really need to go to the extra grief.
73,
Barry
K3NDM
On 10/14/2012 4:43 PM, Jeff Herr wrote:
I need
Yes, Keep the drive low enough so you're running legal :-)
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Alpha-77SX-tp7563937p7563969.html
Sent from the Elecraft mailing list archive at Nabble.com
Mike,
I have the MH3 on my KX3. The reports I have gotten are all
positive. I haven't done a thing with the TX equalizer, but I did crank
up the compressor a bit. With 10 watts PEP, I can get across Europe.
73,
Barry
K3NDM
On 10/10/2012 12:25 PM, Mike Mardis wrote:
I'm looking for any
the current balun didn't work. Moving the antenna is not
an option.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563684p7563728.html
Sent from the Elecraft mailing list archive at Nabble.com
antenna. Should this be a concern? WHy does the tuned SWR not agree with
the bar graph?
Tnx,
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645.html
Sent from the Elecraft mailing list archive at Nabble.com
No balun.
Don, no loose connection I can find. Simple setup and the high reading only
happens on 12m and is consistent.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645p7563651.html
Sent from the Elecraft mailing list archive at
Vic,
I think you're on to something. When I vary the power, below 85W, the SWR
is 1:1. Above 85W, it starts creeping up with the power increase.
If I put some ferrites on the coax, but want to keep them indoors, is there
a best location for them?
Tnx,
Barry W2UP
--
View this message
outside and about 15 feet inside.
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645p7563674.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
Does Elecraft have a balun solution for balanced feeders for the KAT500 at 500
watts?
Steve Barry
University at Buffalo Police
Bissell Hall, Amherst Campus
Tel: 716,645-2228 or 645-8910
Cell: 716,207-9494
FAX: 716,645-3758
(different chipset) as a possible fix but I'd like to hear it's actually
working for somebody before I order one.
Thanks 73
Barry K6RM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Does anyone have experience with the subject combination? I just tried
using a newly-purchased version of my trusty old Keyspan USA-19HS and it
crashes Windows 7 (blue screen) when I try to TX with F1. Worked fine with
XP. I'll order KUSB if I get OK reports here. TIA!
73, Barry, K6RM
Thanks, Gerald. Apparently the Keyspan uses a TI chipset and I did try
their latest drivers. BTW, I have a K3 (connected via P3) on the serial
cable.
Barry K6RM
On Sat, Sep 22, 2012 at 10:47 AM, Gerald Manthey kc6...@gmail.com wrote:
I had the damnest time getting my K2 and usb converter
E72X wrote
I wonder if any of you have experience with R0DE PROCASTER microphone
attached on K3?
I use the Rode Procaster, but I feed it through an Aphex 230. The Procaster
is a superb microphone, but I've honestly not tried connecting it directly
to a radio.
73,
Barry N1EU
--
View
some of these programs on different computers.
How do I bridge the serial outputs? I don't believe the K3 knows
which program it is talking to, so is it as simple as making a Y cable
for the serial ports? Or do I need some other active device (and
software?)?
Thanks and 73, Barry K6RM
, I'm surprised that nobody does.
Barry N1EU
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Phase-Noise-CW-Key-Clicks-tp7562575p7562684.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
, so far. So, don't give up yet. Have a
cold beer and start again:-)
73,
Barry
K3NDM
On 9/13/2012 12:21 PM, Olli Tuppurainen wrote:
I have pretty much given up my LP-PAN +CW skimmer and NAP3 ever since I
upgraded my PC OS from XP to WIN7 ( 64bit ) with AMD X4 Phenom.
Tried now two different
Jim,
Good idea, but there is bandwidth limitations on some of those
small transformers. You may not get more than about 20 or so KHz before
there is drop off. You might want to do some checking before you go
operational with your scheme. Best of luck with the idea.
73,
Barry
K3NDM
On 9
701 - 800 of 1488 matches
Mail list logo
