e leads, and finally go back to the original one
to add more solder or reflow as needed.
It's sometimes almost comical, but it works...
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
eard an ND station on the air! - but the reports were
all 229 or 219 or worse. I had the audio gain up more than I usually
do, and was still straining to copy.
The good news is that everyone was surprised to hear I was QRP ...
more K2 mojo at work!
Another week...
73 de c
rtual QTHs - I tried this once in eQSL and the
pain of multiple QTHs drove me away, screaming.
I'm contemplating switching to a Palm PDA, so I'd be interested
in hearing about logging software that runs there, especially if it
knows how to export the log in a way that HRD will import
round disconnect. I bought
some electric fence spark gaps to provide some lightning protection.
I was planning to 1M 1/2W resistors across the gaps as a bleed ... but
now I'm thinking that I should use a choke instead?
There seem to be lots of differing opions on this :-)
73 de c
at radio! I could probably do a full on
SO2R in CW with 2xK2/100's and not have a problem. But I'm sure I would
prefer one of the "big" radios in the end.
Just my observations from the weekend.
-Chris KL9A
___
Elecraft mailing
I've been reading about the lack of a monitor function with the SSB board in
the K2.
Is there a 3rd party external "box" that might work? Not that I work SSB very
often, but I consider audio monitor to be ESSENTIAL!
Anyone know?
-Chr
GC control circuit /AGCOFF. You might want to check there, to make
sure there is no signal on pin U1-2.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. C
x27;t tried it mobile yet, but I would guess it
will do a FB job on real ignition noise.
-Chris KL9A
Fred (FL) wrote:
Hi -
Thinking of building my 2nd K2. I wondered what
the consensus is on HOW WELL DOES THE NB WORK?
in a K2?
In my spring #5422 K2 - I never could see much
improvement i
us, Pin 7 of U1 only has 0.8V. The manual says it needs
4V, and I can't find a 4V reading on anything, anywhere.
The K2 turns on just fine with *just* the high power 12V supply plugged in.
Any ideas, anyone? I really want to get this thing going!
travel to DX a few times in the past year and
always thought of taking along my KX1 - and was discouraged by trying
to navigate the website to figure out the rules.
It's hard even to figure out for the countries where CEPT is in place!
Sorry, I just had to grumble. I'm sure no one from
want to
wire tip and ground for the SK and change to Hdn mode.
This is hinted at on page 44 (45th page in the PDF), and a bit more
clearly on page 65 (66th page in the PDF).
See also p 68.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@ma
I have been so pleased with my XV50 that I have just started using on
6m, that I would jump at the chance to buy an XV70 to be QRV on
70MHz. Please Elecraft, think seriously about producing one.
73 de Chris, G4BUE
On 13 Jul 2006 at 9:45, Allan Duncan wrote:
> I have been very pleased with
But I thought that sailors knew all the fun spots in San Diego. :)
(Bootcamp Oct 86-Nov 86 San Diego, Master of the airplane pushups...)
73,
Chris N8PHU
ET1(SW) U.S.N. (Ret.)
On 7/12/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
wayne burdick writes:
> San Diego is als
occasional run of QSOs from calling CW
at 10-13 WPM as I do, but I have more luck on the 30m
QRP calling frequencies than anywhere else.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to p
soapbox, too! Let's show off our Elecraft rigs...
http://www.arrl.org/contests/soapbox/?con_id=106
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Chang
FOR SALE:
KAT100-1 150W automatic antenna tuner for the K2 and K2/100. New in box,
not built. Bought new from Elecraft in May 2005. $200+shipping.
Please contact me off-list at:
[EMAIL PROTECTED]
73,
Chris WT1L
___
Elecraft mailing list
Post to
I don't know anything about it other than what I read on the web
page, but the photos of HB9ABX's homebrew mobil antenna sure are intriguing:
http://www.datacomm.ch/hb9abx/antmob-e.htm
He has designs for a number of mag loop antennas as well, which
might fit your restrictions.
7
).
Is there a way to test the 51R resistors in circuit? Also I imagine
these must be non-inductive, ie film resistors, not wire-wound?
Any suggestions on how to troubleshoot would be welcome.
Chris Meagher
VK2LCD
PO Box 61
Woodburn NSW 2472
Australia
Nearest town: Evans Head
HF Rig: Elecraft K2
act so far :-) but I sent that card with
an IRC. It's too soon to count the response as missing...
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Ad
split anything off. Total cost
for all these items unbuilt in 2005 was $1968.45 I will sell all for
$1,750 and include UPS Ground insured shipping to the Continental USA at no
extra charge.
I posted a picture here:
http://users.adelphia.net/~wt1l/rtwr/DSC00848.jpg
Please contact me off list at:
will sell all for
$1,750 and include UPS Ground insured shipping to the Continental USA at no
extra charge.
I posted a picture here:
http://users.adelphia.net/~wt1l/rtwr/DSC00848.jpg
Please contact me off list at:
chris (at) wirelesschris.com
or by phone at (802) 238-7312
Thanks es 73,
Chris
e
difference between what I dial in and what the K2 itself measures.
Does this sound at all familiar? It almost feels like a firmware issue.
I have 2.03d 1.07.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
d??
Could it be something on the K2 control board?
Any ideas appreciated!
-Chris KL9A
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://
some problems there. Sounds like U1 is bad???
-Chris KL9A
On Tue, 2006-05-09 at 22:21 -0400, [EMAIL PROTECTED] wrote:
> I have had the basic K2 up and going for a while, and have been using it
> while I build the KPA100. Got the KPA100 built and all the inital tests
> were fine on RX
e 25, then I can use the slug from
L17 to replace the broken one in L13, otherwise I assume I can use
the slug from L1 which appears to be the same size?
Thanks for any help and advice.
73 de Chris, N4CJ (G4BUE)
___
Elecraft mailing list
Post to
ach time I swap
VFO's? Like when I am on 7005 CW and go to VFO B, I'll be on 7185 CW,
instead of LSB. Can this be done?
Thanks!!
-Chris KL9A
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the l
Does anyone know if a .001 (102) ceramic disc cap will work instead of
the supplied 102 monolithic cap in C49? I lost one of my 102's, and of
course Radio Shack doesn't have a .001 monolith! Sheez. Will the
ceramic discs work?
Thanks!
-
I have been using for 2 years, an HL-200BDx with the K2. It puts out
200W with 10W drive or less, depending on the band.
so far it has worked perfectly and has high levels of protection.
Requires a good DC supply, i have a big battery bank as I'm on solar
power.
Chris
Chris Meagher
VK2L
I bought it exactly with this in mind - something small but adequately
powerful to take with my KX-1.
Unfortunately, 35W is enough that the tuner becomes an issue: that's
more than the T1 is rated, and most everything else jumps to 100W
capacity and becomes much larger. Maybe the
write up a "current" version of "Your Novice Accent" - maybe
it's "Your 5WPM Accent" now?
The idea would be to cover much the same topics as Your Novice Accent,
with modern updates, as well as covering common contest protocol.
Please contact me off-
An article written by myself on constructing the T1 tuner, has been
published in the April issue of Amateur Radio Magazine (Australia).
Best regards,
Chris Meagher
VK2LCD
PO Box 61
Woodburn NSW 2472
Australia
Nearest town: Evans Head
HF Rig: Elecraft K2
Does the signal pass through the KAT2 in both TX and RX or does it only pass
through the KAT2 when you transmit
CHRIS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
though I may try
my hand at homebrewing one.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailm
e narrowing down a problem in the AF amp.
I'm about to give in, though. I'm more interested in getting on the
air than fixing this myself...
Thanks, Gary.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
cult.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
are free again! It's tempting, but I'm not
going to rush soldering the socket back in and then rush a test. I'll
do it tomorrow when I can go through the whole procedure and update
the front panel, too.
One for the archives...
73 de chris K6DBG
__
27;ve used up what we stacked last summer. Oh well.
A lot of our wood is 'deadfall' from the creek ... we had a really good
crop going, until a particularly high flood which swept it all (including
a few 15' telephone pole-sized chunks) d
with the Flying Piggies and my might KX1 sent
its signal all the way to Oklahoma City. Got 339 ... more work is
needed before I can contemplate WAS, but it's definitely encouraging!
Oink oink :-)
73 de chris K6DBG
___
Elecraft mailing list
Po
all, by the way!
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
key difference is that I didn't have to
go looking for what's new, which is what it feels like trying
to keep up with a dozen different fora... (usenet isn't dead, btw,
it just smells funny).
73 de chris K6DBG
___
Elecraft mailing list
Po
I was on 80m SSB and just happened to touch the dit paddle on my key and it
muted the RX the dah paddle does not mute the RX has anyone noticed this
Chris
K2# 5341
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
persuade them
to use the FA command (instead of the FR command) to set the VFO A
frequency.
I don't mind them not using the FB command and not being able to have
true split operation if that is what they want.
73 de Chris, G4BUE
On 15 Mar 2006 at 12:09, Brian Mury wrote:
> On Wed, 2006-
I haven't done any resistor mods yet, but I spread the turns on L2
last week and managed to get my 20m output up about 0.5w according
to the ATU. They now cover more than 70% (in my estimation)...
73 de chris K6DBG
___
Elecraft mailing list
Po
ll have to learn to
live with the problem - a pity because this is the first time that
using my three K2s at two different QTHs has caused me not to like
something about using them.
73 de Chris, G4BUE
From: "Geoff Anderson" <[EMAIL PROTECTED]>
To:
at is sent by N1MM to the K2.
By the way Rich, what logging program are you using? It will be nice
to know of one that doesn't cancel the split option on the K2.
73 de Chris, G4BUE
On 13 Mar 2006 at 8:54, Don Wilhelm wrote:
> Chris,
>
> The K2 is operating properly - apparent
Thanks for your quick reply Dan.
Logger 32 has a "Radio Debug Window" which shows the commands and
replies going between Logger 32 and the K2.
When I click on a DX spot, Logger 32 sends the following message to
the K2:
Set Radio Freq/Mode : FR0;FA0001808;MD3;FA00018080000;
7
rry was using
the DX4WIN logging program and the answer provided was to use the
TS850-TS950 option in DX4WIN for setting the radio, but Logger 32
only has a KENWOOD ALL option, which is the only one that works with
the K2, and N1MM Logger specifically has an Elecraft setting.
Thanks for any
h the mic socket on the keyer?
Any help and suggestions will be appreciated by June.
Thanks and 73 de Chris, G4BUE (currently N4CJ in Florida)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subsc
t actually made negative progress - now the output of the bandpass
at D6 is only about 0.070V, though the voltage on the can of Q22
went up to almost 5V). I've adjusted the VCO tuning for a peak.
I've retouched the solder joints on the crystal.
Other ideas?
73.
chris
_
f 4915-20?)
I notice, now that I look at them again, that the output measurement
is not very far from the 0.35V that's expected. There's a diode (D34)
between the last crystal pin and the jumper W3, perhaps that's the problem?
73,
chris
___
Elec
Expected 0.35Vrms. Actual 0.094Vrms.
I stopped there, because this seems very wrong.
In Gary's note, he mentions that the crystals here should be marked
4915-20, not 4915-S. Mine are marked 4.9136-S, which is what the
manual's inventory lists for the crystal filter set...
So. I'
r archives, it appears that an upper range of 15 KHz is more
suitable, post-temperature compensation circuit (which I believe
this has - the s/n is late enough, past 3446).
Just want to confirm that - should I bother to diddle the turns on T5,
as Don W3FPR suggested?
73 de chris K6DBG
P.S. I w
K2 #5341 is up and running Have just worked 4o3ant for a new DXCC in
antarctica. it is working great .now what should I add to it the auto atu the
dsp unit ?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Sold! Thanks!
Chris Brougham wrote:
Hi Folks,
#3641 with KBT2 battery option is still for sale. New price $475.00
U.S. including shipping to U.S. or Canada.
Paypal is preferred.
Some details:
I have checked the power out on all bands and it's fine. There is a
small scratch on th
w for my
tastes. However, when you disable the AGC it's very loud!
Please reply off list and if you could, please remove the [Elecraft]
subject tag as my Elecraft mail goes into a separate folder.
Thanks and 73 Chris
--
Chris VA7CAB
___
Elecra
Hi list is C75 used on the main pc board I noticed in the photo in appendix D
fig 1 that there is a cap installed on the board I have not got this installed
on my K2 and cant find it in the manual have I missed it or is it not used ?
hope to hear from you soon Chris
Hi group I managed to remove L30 L34 L1 and L2 from the board without damaging
it .Had to brake the inductors up to get them off without doing any damage to
the board I have e-mailed elecraft for new ones.K2 #5341 is now up and running
on 40m will start assembly part 3 tomorrow
Chris
I have soldered the wrong inductor for L30 what is the best way to unsolder it
I think this could be a problem to get it out
Hope to hear from the group soon Chris
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
Hi Folks,
I'm selling my K2 #3641 with the KBT2 battery option. $500.00 USD which
includes shipping to U.S or Canada. Rig works great ... but has been
collecting dust so needs a proper home.
Paypal payment preferred. Please contact me off list with any questions.
--
Chris V
did not come all the way through the PC board . hope to hear
from the group soon Chris
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Lots of places:
http://www.therfc.com
http://thewireman.com/index.shtml
http://www.pl-259.com/
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
bad speed, bad fading ... I've found it very useful. There
are mechanisms for copying sample QSOs as well as common words (and
a supportive mailing list).
The W1AW code practice sessions are great, too. But you can run Ray's
program when
derstand all the tradeoffs.
Suffice it to say that I'll be looking for a small regulated
switcher at the local surplus place, because I think that is more
what I want (I'll take my KX-1 along and listen for noise...)
73 de chris K6DBG
___
Ele
)
I'm working on my antenna setup now, looking for that second contact ...
perhaps it will be more than 10 miles away!
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subs
end to be higher current these days - trying to pare
down my weight for the Spartan Sprint :-)
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, un
ed to block 20V reverse.
I can keep looking; I'm mostly 'just wondering'. It's kind of
heavy, anyway (I'm sure it's a linear, not switcher, which
is, of course, a mixed blessing.)
Thanks.
73 de chris K6DBG
___
Elecraft mailing li
a 13.8v supply.
Huh?
(Bands were horrible anyway - strong noise right on 7038 and SSB on 7040...)
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
remaining
good end is usable.
All in all, they can be a real pain. Don't force them, it just gets worse.
I think that heat alone often helps the 'stuckness'. Note that many commercial
rigs will have the slugs sealed in place with paraffin that seeps down
i
, too.
Nothing in the novice bands or around the qrp calling frequencies, though.
Gotta get my antenna higher!
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
someone
be so kind as to tell me what 'S9+20dB' is in units that my generator
understands (uV), to adjust the S-meter?
Thanks!
73 de chris K6DBG/AG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to po
If you don't happen to have that issue of QST, as I don't, you can
find the details at the author's webpage:
http://poeth.com/SMD.htm
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
I am building the XG1 receiver test oscillator and wonder if somebody
can please tell me if the three leds should be seated flush on the
PCB?
When I insert them, I see a notch in each lead which causes them to
stop about a quarter of an inch above the board.
Thanks and 73 de Chris, G4BUE
A bit heavier than I'd care to backpack with, but nice for picnic
table operations - 12V 12AH SLA battery for $9.95, and the shipping
is cheap if you only buy two:
http://sciplus.com/singleItem.cfm?terms=11000
73 de chris K6DBG
___
Elecraft ma
t got plugged into the
external DC jack...
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/l
o offering a variant that has the
thermistor on a separate mount, so you could have it cool
based on the temperature of the final output stage.
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Hmm. Pin 1 on a DB25 for RS-232 is protective ground. On a DB9, it's
Data Carrier Detect...
This URL doesn't point to the EIA standard, but is the most
practical explanation of serial connector wiring I've found:
http://www.lammertbies.nl/comm/cable/RS-232.html
73 de chris K6DBG
he issue, I think, is that the
DB9 on the K2 presents some signals that will damage a 'normal'
RS232 port if connected with a straight-through cable...
73 de chris K6DBG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a su
Hello,
Expect more activity from Australia on 7 and 14 MHz.
VK licence structures have just changed, and now former novice and
novice limited hams will have the new standard licence, which allows
access to all HF bands, except 1.8MHz & WARC.
Previously they were restricted to 3.5, 21 and 28MHz,
lling, without the possible mess involved in applying a more
traditional anti-seize (I'm fond of the silvery stuff from
Permatex/Loctite, myself). And for the ones that won't come apart
any more, a short shot of Kroil will free them right up.
73
Yes I did Paul and that is why I sold the Omni !!
73 de Chris, G4BUE
On 5 May 2005 at 6:46, Paul Gates wrote:
> Did you ever check the k2 against your Omni.. receiver??? What was the
> result?
___
Elecraft mailing list
Post to: El
until operating
without it this week!
73 de Chris, G4BUE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/ele
No I meant Jlog http://jlog.org it's Java based, so runs on any
platform. It's pretty good; about the best that I have found for Linux.
73, Chris - VP8BKF
Bob Nielsen wrote:
Ah, if only some of the Linux logging/contesting programs would support
the printing of qsl labels!
I h
ap etc under Win4Lin but they all fell over
on graphics issues on my laptop.
Chris - VP8BKF
Nigel KC8NHF/G8IFF wrote:
Hi Ken.
My pooter doesn't have any serial ports so I use USB/serial adaptors.
Have you found any Linux (Fedora Core 3 but it shouldn't matter which
distro) dri
.
Chris - VP8BKF
[EMAIL PROTECTED] wrote:
Now that I have the KIO2 installed I'm anxious to test it out. I see quite a long list of programs that provide support for the K2. Just wondering what is your favorite such program and why? I don't (at least initially plan to) do remote contro
The Dx Convention special event station was putting out a good signal.
N6V from memory.
I was their first Dx contact - There seemed to be a crowd around the
operating position and I mentioned that I was running a K2. How's that
for advertising?
Chris - VP8BKF
Earl W Cunningham
e RPN calculators should
be judged...all others pale in comparison, even though the HP32SII is
significantly faster than the HP42S.
Well I liked it - Anyway but ebay is no use when live outside of the 45
countries that PayPal recognises. So I don't even bother looking.
Chri
Are there any decent modern RPN calcs? I had a much loved HP32SII but I
lost it when I moved house and have not been able to find a decent
replacement. I have soft RPN calc on my palm, but I like proper buttons
to push.
Chris - VP8BKF
and it will pring 27! Every modern RPN calculator
an ambush. Wait for QRZ and give a
call - damm doubled him, wait for QRZ again, give a call - nearly fell
off my chair when he came straight back and gave me a 55.
Must be that mojo thing I guess. Well I suppose I was cheating by using
VP8 mojo
Certainly some fiddly construction in this one, nevertheless T1 tuner
is up and running last night with no problems at all, it tuned my G5RV
on 80m in a flash.
Please make available a transparent case so I can show off to the local
hams!
Chris Meagher
VK2LCD
PO Box 61
Woodburn NSW 2472
Is anyone using a K2 with 5B4AHR's (G3PMR) Shacklog logging program,
please?
73 de Chris, W4/G4BUE
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.8.4 - Release Date: 27/03
ar it!
I built the DSP module on Sunday night and installed it on Monday.
That's quite impressive. It'll take me a while to get it set up for my
ear I guess.
73 Chris - VP8BKF
___
Elecraft mailing list
Post to: Elecraft@mailman.q
nitly only the tune mode that is affected.
Tune power override, doesn't make any difference.
I'm still using a manual ATU and I need a bit more juice to able to get
a good indication on my meter!
The good news from this is that there is nothing wrong with my KPA100 :-)
down at
higher signal levels.
Chris VP8BKF
Chris wrote:
Hi,
I finished my KPA100 last night. Everything checks out ok except for
low power output from the bands that use two of the filters. 17/20 and
18/12/15. I get full power on 80 and 40 (160 untested). Less than 1W
on the affected
hat could be because I've
already had one faulty relay on the 160 module during this build.
Any hints?
Chris VP8BKF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
fitted. I'd recommend a judicious correction.
My bail adjusts nicely and doesn't bend the board and it has never
fallen over.
Cheers. K2#3666
Chris Meagher
VK2LCD
PO Box 61
Woodburn NSW 2472
Australia
Nearest town: Evans Head
HF Rig: E
Yep - I was relying on Elecraft not asking for the faulty relay back!!
(in one piece!) Even getting the pliers on K8 alongside the 160Rx socket
and with an L on each side isn't easy.
Chris VP8BKF
W3FPR - Don Wilhelm wrote:
Folks,
The except below brings up an important point that ha
emove C167 from the
RF board during the SSB option installation carrier balance operation. ;-)
73 Chris VP8BKF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
ckage?
Had to break off this afternoon to attend a nephews birthday party and
do some token woodworking in the bathroom that I am supposed to be
renovating, but got back to the bench this evening and have just
finished the crystals - first toroid winding session tomorrow.
Chris VP8BKF
PA2A
, if I wanted to!
I was around there before they had finished putting the phone down!
Original package was shipped on 3 March - I got it on 26 March, ordinary
mail might have been better!
Cheers
Chris VP8BKF
___
Elecraft mailing list
Post to: Elec
The Summerland Amateur Radio Club from Lismore has won the all-band
all-mode multi-operator section of the Australia-wide John Moyle Field
Day contest. The HF rig used was Elecraft K2 #3666 with Tokyo Hi-Power
HL-200B amplifier.
Chris Meagher
VK2LCD
PO Box 61
Woodburn NSW 2472
Australia
901 - 1000 of 1010 matches
Mail list logo
