Re: [Elecraft] K3 Back Panel Phones Jack... my solution...

ething, or you don't need to make up a special connector. You can buy little adapters that have one 3.5mm stereo jack output and two 3.5mm stereo sockets for input. I think they are made to allow two people to listen simultaneously to an MP3 player. - Julian, G4ILO. K2 #392 K3 #

Re: [Elecraft] [K3] K3 DSP LPF daughterboard - What is an artifact and where can you find them?

nes and speakers with their radios instead of hi-fi models. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-DSP-LPF-daughterboard-Wh

Re: [Elecraft] K3 TXEQ

it is important to adjust the DSP settings of your transmitter when using Heil microphones." ( http://www.heilsound.com/amateur/settings/index.htm ) - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4i

Re: [Elecraft] DIY DSP Rev D

l that I had to remove a couple to do one of the earlier K3 mods. I just used two soldering irons and applied them to both ends of the part at the same time and it was off in a jiffy. MUCH easier than removing parts from thru-hole boards. So is this really as difficult as people make out? - Ju

Re: [Elecraft] K3: honest question re Audio Peak Filter

be fulfilled using an external box, unless Elecraft finds a way to shoehorn a new APF board into the K3? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this messa

Re: [Elecraft] what came with the K3 (cables, mic)

Out of all those things I only got a power cable and a manual. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/what-came

Re: [Elecraft] [K3] audio clips to share

ie about the K3. > > Unlimited capacity on a server with 2,972 other websites on it ( http://whois.domaintools.com/ad4c.us ) for $20.10 a year ( http://www.siteground.com/ )? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com

Re: [Elecraft] K3 Feature requests etc.

Richard Squire - HB9ANM wrote: > > The only thing the K3 does NOT have is perhaps a sunspot generator... ;-) > But this request will probably end up very low on Wayne's list, hi! > I heard it's right at the top. The ionospheric interface is causing some trouble, though

Re: [Elecraft] [K3] Best Filter for the K3 when operating PSK31

I think that would be a rare situation for most people. I also think that, even without a narrow roofing filter, the K3 would cope with a very strong close-in signal better than most other radios. So I would hold off buying the 200Hz filter until I found that I actually needed it. - Julian, G

Re: [Elecraft] [K3] Best Filter for the K3 when operating PSK31

useful to have the AM filter which would allow you to open the receiver passband up to 4KHz. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context:

Re: [Elecraft] [K3] K3 RX Equaliser SW App?

the EQ settings that can safely be used during normal operation. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-RX-Equal

Re: [Elecraft] RTTY and the K3

e my K3 to 4 bars of ALC and beyond using the latest firmware. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/

Re: [Elecraft] xv series

ports provided by the KXV3A accessory than to use one of the antenna sockets. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n

Re: [Elecraft] K3: LPF, bass audio, new DSP board: Stirring the pot?

PF. I don't know if anyone actually got one of those, or whether Elecraft delayed fulfilling the orders until the LPF was ready and decided not to ask those who had already paid fro an extra $20. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://

Re: [Elecraft] Files to share in my new page

gs,problems you have > had,improvements,mods,etc. > I don't like to stifle anyone's initiative, but isn't that what the K3 wiki is supposed to be for? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html

[Elecraft] External speakers suitable for K3

. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/External-speakers-suitable-for-K3-tp4224999p4224999.html Sent from the Ele

Re: [Elecraft] [K3] K3: Carry-on Pelican 1510

ould protect a radio from that kind of treatment. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-Carry-on-Pelican-15

Re: [Elecraft] [K3] K3: Carry-on Pelican 1510

already a machine at Manchester airport that lets security guards see through your clothing. I think I'd rather not fly than be subjected to that level of indignity. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.htm

Re: [Elecraft] [K3] K3 Digital Mode Settings

t the best possible copy from a weak signal, but it's more work and not necessary for the majority of contacts. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View

Re: [Elecraft] More on K3 wiki site

maintaining it. I believe that content had to be approved by sysops as a response to some of the reactionary members of the reflector who stated that they would not trust the wiki as a source of information because people might deliberately post misinformation on it. - Julian, G4ILO. K2 #392 K3

Re: [Elecraft] [K3] K3 Data mode power creep

s normal. When it starts the K3 doesn't know exactly how much gain is needed to deliver the requested power level. The reason the power increase is slow is that the ALC in DATA A has a very slow response so as not to cause poor IMD when using PSK modes. - Julian, G4ILO. K2 #392

Re: [Elecraft] K3: New K3DSPUPGD price

feel they have to upgrade because they can't bear the thought that their K3 is in some way inferior to current models. But if you didn't think you needed the upgrade before you heard about it then you probably don't need it! :) - Julian, G4ILO. K2 #392 K3 #222. * G4ILO

Re: [Elecraft] Raised K3DSPUPGD price?

modifications, including all the minor improvements Elecraft has made along the way - the so-called "secret" modifications that some people seem to know about. (Don't ask me, I've only heard the rumours.) - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http:/

Re: [Elecraft] Source of mating ACC cconnector (K3)

David Cutter wrote: > > Be nice if we could order from Elecraft, especially from outside US, along > with other bits on order. > Can't you get it from Maplin? I used one of these: http://www.maplin.co.uk/Module.aspx?ModuleNo=1113 . ----- Julian, G4ILO. K2 #392 K3 #222

Re: [Elecraft] K3 Survey :NON F/W wish list

of votes. > > You mean, something like Mantis (http://www.mantisbt.org/) ? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3

Re: [Elecraft] K3 needs survey -- firmware and application software

Dick Dievendorff wrote: > > Would you dedicate the K3's serial port to this function? Instead of a > contest logger? > Why would you need to, given LP-PAN, VSPE etc? ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://ww

Re: [Elecraft] K3 needs survey -- firmware and application software

netting FM signals, using the CWT indicator. Support for PC memory management software (direct access to memories.) - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View

Re: [Elecraft] amplified speakers 'comspkr' west mountain radio

are back ordered there too, but I like the look of them and with the option to send them back if they aren't as RFI proof as claimed it's probably worth waiting for. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/k

Re: [Elecraft] Raised K3DSPUPGD price?

unctionality remains unchanged. If you try some high impedance headphones you may well find, as I did, that there is nothing to be gained by replacing the board. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - htt

[Elecraft] [K3] Amplified Speakers

s when I'm on the radio. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/Spurious-tp4198871p4206108.html Sent from the [K3] m

[Elecraft] [K3] External speakers

my K3. I don't have space for hi-fi bookshelf speakers. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/Spurious-tp4198

Re: [Elecraft] [K3] K3 spurious

who uses high power into a beam and has the monitor turned up loud might well have a problem unless they use headphones or external speakers. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com

Re: [Elecraft] Spurious

Jim Brown-10 wrote: > > I'm told that the > cause is acoustic coupling between the speaker and the synthesizer board > Somebody reported here a few weeks back they could cause microphony by knocking the K3 case. It adds up. ----- Julian, G4ILO. K2 #392 K3 #222. * G4I

Re: [Elecraft] [K3] kit building or buy ready for use

anti-static mat the cost will still be about half the money you saved buying the kit version. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context:

Re: [Elecraft] [K3] K3 Receiver Noise Level -- Evaluation and Adjustment

ne output, and not when someone is listening to CW on speakers or headphones. I will have to try connecting the rear speaker or headphone output to the sound card to see if the harmonics can still be observed. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com *

Re: [Elecraft] [K3] K3 Receiver Noise Level -- Evaluation and Adjustment

at there is some non-linearity in the audio stages that sets in at a fairly low level. I'm not an expert either, but might the isolating transformers in the line output be the cause of this? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - htt

Re: [Elecraft] [K3] K3 Receiver Noise Level -- Evaluation and Adjustment

inent (particularly the 2.3KHz one) with AGC THR = 8 which is what I used when taking the plot posted on my blog. You can experiment to see this for yourself. I have no idea what this proves, but hope eventually to learn something. What would be really interesting would be to see plots taken before

Re: [Elecraft] [K3] Why K3 appears noisy?

e XG2 to do the calibration properly. > No "official" reply to this yet. I assumed that the factory default option was simply to restore the radio to its original state if the user wasn't happy after doing the calibration. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO'

Re: [Elecraft] K3: Keying problem on CAT line

Forgive me if this is stating the obvious, but have you disabled VOX by any chance? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http

Re: [Elecraft] [K3] Noisy K3 receiver

ame time reducing the AF gain to keep the signal level the same, the difference should be more noticeable. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message

Re: [Elecraft] : K3 receiver noise - my test results (long)

flat for FM, especially if you want to do packet / APRS using the new 2m module, so hopefully per-mode EQ is still on the to-do list somewhere. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktu

Re: [Elecraft] : K3 receiver noise - my test results (long)

ings the K3 sounds really good now on high impedance phones and on the internal speaker. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.n

Re: [Elecraft] : K3 receiver noise questionable test results

e headphones need anywhere near 100mW of output to drive them so overloading the amplifier should not be a problem. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this me

Re: [Elecraft] : K3 receiver noise questionable test results

se FM, in particular, doesn't need equalization like this. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/Re-K3-receiver-n

Re: [Elecraft] : K3 receiver noise questionable test results

that low frequencies have no benefit when trying to copy weak signals but surely it is the role of the filtering to cut out those frequencies by manual adjustment when trying to receive a weak signal? The purpose of equalization is to achieve a pleasant and balanced audio response for gener

Re: [Elecraft] [K3] K3 receiver noise questionable test results

dB down on the level of noise within the passband going from 3KHz to 20KHz. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.

Re: [Elecraft] [K3] Noisy K3 receiver

n those. Most people will have computer speakers already they can hook up as an experiment, so it would not be difficult to try it. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.

Re: [Elecraft] [K3] K3 Rev C +AF filter

hat lot must be at a pretty low level already. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-Rev-C-AF-filter-tp4179228p41

Re: [Elecraft] [K3] KY command: internal buffer size?

fer is empty. If it is less than 75% full I send 6 characters. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com

Re: [Elecraft] K3: Noisy Receiver? - not here!

the only way to avoid that problem is never to buy anything until just before it becomes obsolete... - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in con

Re: [Elecraft] [K3] Noisy K3 Receiver

ng noise internally that makes it harder to hear weak signals compared to another RX. Those MDS figures can't lie, surely? So why is a new DSP board needed, except to "fudge" the sound so that it doesn't sound as noisy? You aren't going to hear anything with the new board

Re: [Elecraft] K3-Ham Radio Deluxe question

11 digit number, the frequency in Hz. If the frequency is correct, HRD is not displaying it correctly. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in c

Re: [Elecraft] Noisy K-3 Receiver

upled with the fact that its calibration results in something close to the "standrard" 6dB per S-point? I would suggest that you perform the S meter calibration procedure described in the manual. I am not familiar with the FT-1000MP but with many radios the S meter basically reads the AGC volt

Re: [Elecraft] K1, K2, K3: filtering email

s ago). > To disable delivery of unwanted digests click on the "Unsubscribe or edit options" button at the bottom of this page http://mailman.qth.net/mailman/listinfo/elecraft and log in, you can then change various options. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO&#x

Re: [Elecraft] K3-Ant Tuner Issue with RTTY

itch to PSK on the K3 then back to FSK all is well > again. Has anyone else seen this issue? > That sounds like a variation on the issue some of us digimode users reported a couple of months back. It was fixed soon after. Are you using the latest firmware? - Julian, G4ILO. K2 #392

Re: [Elecraft] Help with K3 ports for CW Skimmer CAT

r LP-Bridge so I've never tried it) let you use Skimmer and HRD at the same time, which I imagine would be quite useful. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- V

Re: [Elecraft] Memories

sequence of K3 software control commands you can easily edit it to add a PC command, e.g. PC0401; would set the power to 40W. You can also edit the names of the shortcuts, change the order, export groups of shortcuts to a file, import them from a file. - Julian, G4ILO. K2 #392 K3 #222.

Re: [Elecraft] Help with K3 ports for CW Skimmer CAT

king to the K3 and Skimmer will be talking to 'Bridge, and I haven't seen too many reports of LP-Bridge having trouble with USB adapters. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.c

Re: [Elecraft] Is the K2 old technology?

tually to become "obsolete" are things outside Elecraft's control, like the discontinuation of key parts for which there are no alternatives. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.

Re: [Elecraft] Ethernet to Serial

ns stuff by mistakes (usually a lot of them.) But I always found that I could test whether connections from outside the LAN works just by connecting to my external IP address (the one your network appears as on the internet.) - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www

Re: [Elecraft] Ethernet to Serial Converter

to Serial solutions being discussed unless you can eliminate the PC at the remote end altogether. Remote Desktop over a virtual private network is standard technology and relatively easy to get going. It should not be ruled out as a solution without good reason. ----- Julian, G4ILO. K2 #392

Re: [Elecraft] Ethernet to Serial Converter

a sound card at all. You can do this with KComm now (and it solves the problem of how you send CW, too.) All it needs (hint, hint) is a command that allows KComm to get the decoded text back from the K3 without disabling all CAT operation. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's

Re: [Elecraft] Ethernet to Serial Converter

know enough > about network communication to make the thing work. > > Hmm. It's probably some sort of embedded computer. I don't know why they didn't go the whole hog and use one with a built-in sound card so you could have two-way audio streaming as well. Perhaps next year'

Re: [Elecraft] How does Ethernet to Serial Port device work?

while ago I came across a site that had a software Ethernet to serial server, which could be useful if your K3 is normally connected to a PC but you want to talk to it from a different one elsewhere on the network. It would avoid the cost of one of these adapters. But now I can't find the site.

[Elecraft] SoftRock Lite 6.2 for K3 Panadapter

Can anyone advise me of the spec of the crystal needed to use a SoftRock 6.2 Lite receiver on the IF output of the K3 as a panadapter? I'd be particularly interested to know where to purchase one in the UK. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.c

Re: [Elecraft] [K3] K3 software utility needed

such utilities useless, anyway. Obviously it would be easier if more options could be set using direct commands so programs don't have to put the K3 into menu mode at all to read or write settings. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KCo

Re: [Elecraft] [K3] K3 software utility needed

s change the K3 modes, but in practise most people will be using one logging app that does most of the polling and sets the mode and the other apps will be using a limited set of commands to provide some specific functionality. Trying to run HRD and another logger at the same time would be inadvisa

Re: [Elecraft] [K3] K3 software utility needed

I'm surprised no-one has mentioned VSPE (Virtual Serial Port Emulator) http://www.eterlogic.com/Products.VSPE.html . Unlike LP-Bridge it passes all commands through to the K3. You can do firmware updates through it, though *not* while other radio applications are running! - Julian,

Re: [Elecraft] [HAM] OT: DZKIT Sienna?

. Were I not now so long-sighted that any construction involves bending over the desk with a magnifier headset with an inevitable painful result on my back, I'd be tempted to order one myself. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www

Re: [Elecraft] LPA power tran's standoff's

ng to the K3 low power amplifier? Yes, I did find the same thing. I eased it back up a bit so it was not quite fully seated but it was still about a millimetre higher than it needed to be. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4

Re: [Elecraft] Is this feature in the K3? Have I missed it?

missed it. I'd be happy to have 1W increments below 12W and 5W increments above. Perhaps the new macro feature could be used to set the power to a convenient level? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html *

Re: [Elecraft] K3 on 160 Meters

nk all previous incidences were using HRD. I think there can be a conflict between CAT PTT control and hardware PTT control. You need to set the PTT menu option to OFF OFF. Alternatively you need to make sure that the logger is not using both CAT and hardware PTT. - Julian, G4ILO. K2 #392 K3

[Elecraft] K2: CAT PTT and CW

set to straight key not paddle). I think MixW also supports Winkey keying which is more reliable. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in conte

Re: [Elecraft] [K3] AF/RF Knob situation - joined the club Me Too!

Check your knobs with a magnifier - you might be surprised! - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/AF-RF-Knob-si

Re: [Elecraft] AF/RF Knob situation - joined the club

enough and allow all owners of older K3s to request replacements without waiting for the originals to fail, as it appears likely they will sooner or later. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http:/

Re: [Elecraft] [K3] K3 mods

Steven.Zabarnick wrote: > > I was not able to perform the K3 AF Output Mod (two 470 ohm > resistors on the KIO3 board). > I thought they were two 51 ohm resistors (according to the instruction sheet I have here.) Has there been a mod to the mod? ----- Julian, G4ILO. K2 #

Re: [Elecraft] AF/RF Knob situation - joined the club

nobs it might cause Elecraft a bit of a problem. But if it's more likely to be when, rather than if, I join the fractured knob club perhaps I ought to ask for some spares. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm

Re: [Elecraft] [K2] K2 and then what?

use than portable. > > Not an Elecraft, but definitely a kit: http://www.dzkit.com/sienna_main.htm - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in

[Elecraft] Obtaining spares from Elecraft

t here. I don't know what the answer is short of a European distributor that also carries spares and handles servicing. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -

Re: [Elecraft] K3: REF IN

3 DSP clock is probably more accurate than a computer sound card. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-REF-IN

Re: [Elecraft] K3 Broken AF knob and bad service to geta replacement.

ny broken knobs yet so I can't ask for replacements but I no longer have confidence that the knobs I have will last the life of the radio. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.

Re: [Elecraft] K3 Broken AF knob and bad service to geta replacement.

knobs. One is here: http://jamespaulsarte.com/temp/ham/knob1.jpg . To be honest I don't think they suit the look of the K3. They don't even match the other knobs. It might be a solution in ten years time when a knob breaks and Elecraft doesn't make them any more, but that's the situation I&

Re: [Elecraft] K3 Broken AF knob and bad service to get an replacement.

knobs on the IC-7700. I think I'd go for it. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-Broken-AF-kn

Re: [Elecraft] K3 bandwidth for digital modes

reply to stations that are actually outside the transmit passband. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-bandw

[Elecraft] K3: REF IN

the main K3 master oscillator, so it would also benefit from the ability to lock the reference oscillator? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this messa

Re: [Elecraft] [K3] K3 construction tools:RF Pwr meter 1 mW to 5W, Sig Gen 50uV on 20m or 40m

nk perhaps it is suggested to check the transverter output if you install the KVX3. But I never bothered when I installed the KXV3 later on, due to oversight. As long as the output is sufficient to drive the transverter, you can just adjust the drive until you get the correct amount of power out. ---

Re: [Elecraft] [K3] Nabble - can't get there from the Elecraft page?

log in every day. The old one remembered your login for weeks. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/Nabble-can

Re: [Elecraft] USB Sound Card for digital modes.

> will I still be up against the new AGC action. > A solution that would definitely avoid any hassle caused by generic sound card drivers would be a dedicated ham radio interface such as a SignalLink. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KC

Re: [Elecraft] [K3] K3 #1193 - CHIRP

The other filters have a different offset so when going from TX to RX the VCO has to change. For some reason it is changing sluggishly and causing chirp. Have you done a VCO calibration? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4il

Re: [Elecraft] N3FJP setup

ther USB Serial Cable. My computer doesn't have a > serial > port, boo! Anyway, it's a great group. One can always get help, fast, on > the Elecraft reflector. Best 73, Steve > If you used KComm you could key the K2 / K3 using CAT commands so you would not need any extra co

Re: [Elecraft] K3: Config: BAT MIN missing?

ecking, that looks like one of the things that would only appear when TECH MD is ON. have you turned it off? - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message

[Elecraft] Wanted: SoftRock

that some people may have SoftRocks they are using for this which will become surplus to requirements once Elecraft begins shipping the K3. If so, I could offer a good home to one. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm

[Elecraft] ANN: KComm 1.8 released

if you are looking for that kind of thing it is not for you. It is old fashioned lean, mean software and the download is only 1MB. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html

Re: [Elecraft] [MM] W2 connection problem - NZ0T Comment

memory and I don't know whether it would work with a W2. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/W2-connecti

Re: [Elecraft] [MM] W2 connection problem - NZ0T Comment

any other program running? Sorry I don't have a W2 so perhaps I'm barking up the wrong tree here. But I do know that I can't use the latest version of Fldigi with VSPE, which does suggest to me that some programs may not like working with VSPE for some unknown reason. - Julian,

Re: [Elecraft] Mode memory by band

experience the problem you describe. I suspect that you were using some kind of logging software. If it tries to set the mode instead of leaving it to the K3 to do that then it could be causing the problem. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm -

Re: [Elecraft] [K3] K3 in SS SSB

the auto-information messages and always has done. If I select SPLIT on my K3 by pressing the front panel button then a red SPLIT indicator displays in KComm. If I can do it I'm sure they can. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - htt

Re: [Elecraft] Transverter settings and UPdate

ent and then RESET after every update if so ARGH > > Thanks for any insight on the UPDATE ... > > No, Bill. All your settings are preserved. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTun

Re: [Elecraft] K3 Production Firmware Release (3.63)

d the files are still there from last time then IE will "helpfully" show you those instead of looking for new ones. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View

Re: [Elecraft] K3 and Yaesu

ople asking where they can buy Elecraft products in the UK, who have said exactly that, so it's not just speculation. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- V

<    1   2   3   4   5   6   7   8   9   10   >