are behind you soon!
73, Peter (VK6HP)
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Jorge Diez - CX6VM
Sent: Monday, 6 May 2024 1:42 AM
To: Mike Fatchett W0MU
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Lightning concerns: Was: K4 Remote: My QTH vs
Hello Peter,
I'm not an Elecraft transceiver user so I'll defer to others on the radio
specifics.
One thing to watch is that you're actually "seeing" the noise properly on the
apparently high s/n port. In other words, make sure the levels are sufficient
throughout the analog - dig
tenna? I'd be pleased as punch to receive in this configuration but it's
not practical to manually switch from ANT-2 on receive back to ANT-1 for
transmit.
Regards,
Peter Dougherty, W2IRT
__
Elecraft mailing list
Home: http://mailm
Here’s the problem: I’ve been successfully running a K3/KPA500/LDG AT-600ProII
with no problems, usually USB and digital modes at about 400W out. I recently
obtained a KAT500 and replaced the LDG tuner. I used the Elecraft 15-pin cables
for full integration. The KPA500 follows the K3 when I
experience with Kenwood equipment shipping has been
very good, as has been the experience with the delivery of small-parcel
express-post items from SDRKits.
73, Peter (VK6HP).
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Jim Brown
Sent: Thursday, 3 August 2023 11:27
when I've suggested it.
I think it'd be useful for Elecraft to pay attention to the feedback from Lower
Spewing, Kanga Valley, or whatever international destinations are involved.
There's not much of value in getting commentary from California!
73, Peter.
-Original Message-
From
Hello.
Please let me know when you get this?
I'd like to ask you something
Thanks
Peter
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
My K3 into the KPA500 for over ten years . . . . The FAN REV is 1.54
(this might be software)The resting temp is 27C. When on RTTY I set
the FAN to 4. Otherwise 2 for most of the time. Knowing temperature is
the killer of electronics (short of lightning) I try to keep things cool.
For 10
ived mails before sending it to all participants.
So, for anyone reading this: Send at least Plain Text + HTML or better
still Plain Text Only to this mail-reflector.
73,
Peter - PA0PJE
Op 2023-04-03 om 02:13 schreef W3FPR:
Jim,
If I understand your question in the subject line (but no text
Think I'll wait for the upgrade version, Shakespeare.
P
Sent from my Verizon, Samsung Galaxy smartphone
Original message
From: kevinr
Date: 4/1/23 11:08 AM (GMT-05:00)
To: Elecraft Reflector
Cc: m...@elecraft-kx.groups.io
Subject: [Elecraft-KX] On the threshold of a dream
Sorry Barry, it's empty again.
73, Peter
Op 2022-12-30 om 14:05 schreef Barry H:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
plain text only"
I don't know how this must be set in Gmail, I use a local program to
write mail called Mozilla Thunderbird.
Hope this helps.
73 es HNY,
Peter PA0PJE
Op 2022-12-30 om 01:51 schreef Barry H:
__
Elecraft mailing list
Sorry Jorge, you are right...
Those are real 10K potentiometers.
You have to order those from Elecraft I think.
Good luck and 73,
Peter
Op 2022-12-03 om 16:05 schreef Jorge Diez - CX6VM:
Hi Peter
but it has stopped at left and right.
Anyway, it broke, it was shelled :-(
I will need to find
Hi Jorge,
Those knobs drive digital encoders. Digital encoders usually have no
hard stops.
73,
eter
Op 2022-12-03 om 02:03 schreef Jorge Diez - CX6VM:
Hello
in one of my K3 radios, AF, SUB, RF/SQL and SUB knobs turn all aroun, no
limits on right and left side
Couldn`t figure out if I need
Today I ordered a spare CM500 from Sweetwater and have a tracking number as
it was also shipped today.
Pete W4WWQ
On Wed, Nov 2, 2022 at 1:26 PM David Sumner
wrote:
> I just bought a second CM500 from Sweetwater. Great customer service. They
> were out of stock but let me know as soon as new
suspicion
that this is going to become a major issue for a lot of users as more people
get the 22H2 update, unless it's just a simple fix.
Regards,
Peter Dougherty, W2IRT
Thanks for this. I will try to see what the COM devices are supposedly
connected to when it's in failure mode but it's all very cryptic.
I have already deleted old phantom devices during the first phase of
troubleshooting, as well as deleted all unnecessary software from the system.
The
Sent: Saturday, July 2, 2022 3:01 PM
To: 'Peter Dougherty (W2IRT)' ; 'Wilson Lamb'
; 'elecraft'
Subject: RE: [Elecraft] Com Port Problems
Peter -
If you're sure that the problem is not what we addressed, then I suggest you
reinstall Windows 11. Presumably you're using the " Pro &quo
I have never owned a Heil that didn't give me problems at some point in its
life. It's always something. I gave up a long time ago and bought an Arlan
Communications radiosport headset. It's more expensive but it's absolutely
amazing. No clamping on my head, no mechanical construction problems,
The problem isn't the Elecraft radio, or the COM ports, it's a defect of some
nature within Windows 11 that has suddenly manifested itself. I've tried all
the usual troubleshooting problems and no-go, and even a Microsoft 2nd Level
guy spent three hours with me on the phone and did it all again
The issue is far deeper than this. None of the COM ports work normally after
starting the system. Occasionally the radio connects to the software
normally, other times it doesn't. If I have it working with N1MM, close down
N1MM and try to start Commander (DX Labs) it won't work initially, but if I
them.
- pjd
From: Lyn Norstad
Sent: Thursday, June 30, 2022 8:46 PM
To: 'Julia Tuttle'
Cc: 'Peter Dougherty (W2IRT)' ; 'George Thornton'
; 'Elecraft'
Subject: RE: [Elecraft] COM port problems
Julie –
I can look for it … but I don’t believe it was in an official MSFT document
10:23 PM
To: Peter Dougherty (W2IRT) ; Elecraft@mailman.qth.net
Subject: RE: [Elecraft] COM port problems
It is possible the parameters set in the computer after reboot don't match
those set in the program. Check the port and baud settings.
Generally xom port settings need to match
this.
Regards,
Peter Dougherty, W2IRT
DXCC Card Checker/CQ-WAZ Checkpoint
www.facebook.com/W2IRT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Dear Reed,
Send mail to this reflector as "Text only" or both text and HTML for all
HTML markup text is skipped by this qth.net mailing list.
Your mails are received as completely blank by all of us as shown below
my message.
Best 73, Peter - PA0PJE
Op 29-04-2022 om 01:12 sc
sound seems fine at start but fatigues just as much
as anti-phase. Only the spacial setting on the KX3 is very useful but
even then I like to switch back to mono at times.
Just my €0,01
73
Peter - PA0PJE
Op 28-12-2021 om 02:18 schreef Bob McGraw:
Yuck! As a retired recording studio engineer
and quite compact, so they can be angled to
optimize the tinned lengths on e.g. partially-mounted toroids. It's a slightly
longer and calmer process than the melt/burn approach.
73, Peter (VK6HP).
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Gwen Patton
Sent
e the best
balun for the job.
My setup is very much a compromise on a suburban block but does allow decent
630 m operation, along with HF capability.
73, Peter.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Ed Cole
Sent: Sunday, 31 October 2021 7:26 AM
To
lower pins and put the front key setting to "hand"
73,
Peter-PA0PJE
On 2021-26-10 at 00:26 Rich WC3T wrote:
I knew this article would come in handy.
http://ag6qr.net/index.php/how-to-use-a-straight-key-and-paddles-together-on-a-kx3/
On Oct 25, 2021, at 18:13, Paul Huff wrote:
I
We just switched to getting internet through T-Mobile, a cell phone
connection. It's a hotspot, but fairly large and more capable than the
little dongles. Not blazingly fast, but good, and reasonably priced.
Peter W0LLN
On Wed, Oct 20, 2021 at 1:22 PM eric norris via Elecraft <
elecr
that Elecraft and several other US
manufacturers also implement similar systems, which mitigate a number of
potentially embarrassing (or worse) brain/finger problems. Manufacturers such
as Icom and Yaesu could usefully catch up.
73, Peter (VK6HP)
-Original Message-
From: elecraft-boun
), the overall experience was very average.
73, Peter (VK6HP).
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Barry Simpson
Sent: Wednesday, 15 September 2021 6:15 AM
To: Elecraft Mailing List
Subject: [Elecraft] KPA1500 Power Level
I have had a quick look
oth should know that markup is
removed and only the plain text part is distributed.
Data is money so keep the data as small as possible.
73,
Peter
Op 09-09-2021 om 13:46 schreef Ludwig Hechler:
Oops, I'm sorry!
I configured my Thunderbird and hope it works now.
Here is my text again.
Hi folks,
Hi Ludwig,
You should write mails in plain text on this reflector.
HTML-only mails come through completely empty.
Attachments are also not allowed and will be stripped as well!
73,
Peter - PA0PJE
Op 09-09-2021 om 08:37 schreef Ludwig Hechler
Message 17
How much for the K3 package ….call me
760-318-0186
Peter VE7REZ
Sent from my iPhone
> On Aug 24, 2021, at 3:04 PM, elecraft-requ...@mailman.qth.net wrote:
>
> Send Elecraft mailing list submissions to
>elecraft@mailman.qth.net
>
> To subscribe or unsubsc
completely...
73,
Peter - PA0PJE
Op 14-07-2021 om 14:54 schreef jerry:
Actually, I suspect that when I scrubbed it with isopropyl alcohol, it
shorted out
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
computer and N1MM+ to no effect. I
rebooted the computer and the radio after every change to no effect. The K3s
does respond properly to the Winkeyer on COM5 and it transmits and receives
using VOX normally.
I don’t know where to go from here. Assistance greatly appreciated.
Peter W2CDO
Sent
>>"limited to Windows"
Not so: NanoVNA-saver is software written in Python and is platform
independent. I use it on Linux Mint 20.1
https://github.com/NanoVNA-Saver/nanovna-saver
73,
Peter - PA0PJE
Op 25-06-2021 om 14:17 schreef w2xj:
The problem with that is it req
on this reflector.
Those people that use markup in their text hoping that bold and italic
or colors get through, beware: It does NOT work here.
Lest's keep it that way.
I for one send plain text only, no HTML at all.
73
Peter - PA0PJE
Op 13-05-2021 om 01:35 schreef Bill Lederer:
Ok, my bad
the request online to get a ticket to send it in for repair
no reply. ? Who should I try and contact to see if I can get it working .
73 Peter VE7REZ
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I'm looking for some code that I can write into an N1MM macro that will
trigger playing one of the 4 memories in a K3S. I've looked in the
programmer reference manual but I'm not finding any command to do that.
Any suggestions?
Pete Chamalian, W1RM
w...@comcast.net
lower than these two frequency limits.
I suppose you more likely need an attenuator between the upmixer and the
dongle.
73,
Peter PA0PJE
Op 08-02-2021 om 14:48 schreef Eric Lanzl:
Regarding the RTL SDR dongle. I notice that it says that the dongle will go
down to 500 khz with reduced samplin
Installed are Libwebkit2GTK 4.0-37 and Libwebkitgtk 3.0.
I won't tell you to update to Mint 20...
I use 19.3 MATE desktop and leave it that way. Tested 20 on an old
laptop and VBox6.0.
Stay safe 73,
Peter PA0PJE
Op 20-12-2020 om 19:22 schreef Dave B via Elecraft:
Tried the Help button, nothi
on the enlightened being able to spread the good
word!
73, Peter (VK6HP).
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Frank Stein
Sent: Thursday, 3 December 2020 10:20 AM
To: Wes
Cc:
Subject: Re: [Elecraft] Arecibo antenna collapses
There is also
Great, thanks Wayne. It will be exciting to see these new rigs start to
roll off the assembly line and into the hands of users.
Pete, W1RM
w...@comcast.net
-Original Message-
From: Wayne Burdick
Sent: Thursday, October 08, 2020 1:10 PM
To: Peter Chamalian
Cc: Elecraft Reflector
I've read the specs but I can't translate that into practical terms. I
suspect the K4HD is a better choice when you are in a multi transmitter
environment like FD or a multi-multi but are there other situations where
the HD is a better choice? I do have a few local hams and I have
encountered
Q
Elecraft List Moderator
So not new at all, I think.
73,
Peter - PA0PJE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth
Please use the reflector and do not divert to yahoo/google/groups.io
etc. Share information at one place, do not split it up.
73,
Peter - PA0PJE
Op 30-08-2020 om 14:53 schreef John Bohnovic:
I can filter all of the Elecraft groups so that all of the messages from
the different groups appear in one
Joe, you can download owner's manual/errata/accessory/tips etc here:
https://elecraft.com/pages/kx3-high-perofrmance-portable-transceiver-manuals
Page 8 of the manual describes all the display items.
72/73,
Peter
On 2020-08-19 at 20:06 Wayne Burdick wrote:
The 'T' indicates that text decode
On a few occasions I have had reports of a broad signal generating key
clicks. One report was backed up with a photo of a pan adapter screen shot.
Subsequent checks with a local showed no such problem. The station who
reported the problem told me he had received a similar report from a number
of
t together by qualified users. Spain as a
country should in that case be to blame, not Elecraft be forced to make
adaptions to the kit. As should of course Nouvelle Caledonie.
73,
Peter - PA0PJE
__
Elecraft mailing list
Home: http://mailm
,
this mod works great, and eliminates a big source of frustration.
-
73 and Good DX
Peter, W2IRT
President, North Jersey DX Association
DXCC Card Checker
Letter O Manager, ARRL Incoming 2nd District QSL bureau
Thanks Bob. I set my AGC SLP to 5 and thr to 14 and it helps. I’ll have to
play with your values and see if it’s better.
My RF gain is at 3 o’clock.
Pete, W1RM
w...@comcast.net
From: Bob Wilson, N6TV
Sent: Thursday, July 02, 2020 8:34 PM
To: Peter Chamalian
Cc: Elecraft
My K3S is turning CW into mush. Huge pile ups as K2D are really hard to
deal with. Any suggestions other than get a K4 which I have on order?
Pete, W1RM
w...@comcast.net
__
Elecraft mailing list
Home:
I'm running the K3S and Micro Keyer II. When I go on digital there are
times when the K3S appears to be putting out RF but there is none. When I
switch to CW all's well.
If I turn the K3S, Microkeyer II off and shut down the device router
software then turn it all back on, I get RF out on
any decent mail client and be clickable to launch your browser.
73,
Peter
Op 27-06-2020 om 06:17 schreef ab2tc:
Hi Kevin,
I am not sure what the problem is, but the link to
"catalog.data.gov/dataset/ionospheric-digital-database" in your original
post works fine here. Interesting inform
Please tell us which stations will be using K4's on FD? I want to pay close
attention to them.
Thanks
Pete, W1RM
w...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I would like to hear this same A/B comparison but in a pile-up with 4 or
more stations calling. I must confess the hard edge on the K4 "feels" more
like a click to me but that's just my initial reaction. I have pre-ordered
a K4HD.
Pete, W1RM
w...@comcast.net
-Original Message-
From:
VOX should then work.
Good luck
Peter
M0RYB
I've recently changed from FSK to AFSK, and having issues. FWIW, I am
using N1MM with 2Tone as my RTTY interface, with the K3 internal sound card.
First, When I go to DATA MD, it is always set to FSK D. I reset it to
AFSK A and it works; however, if I cha
If you have a K3s with the built in codecs that's not the case at all. It's
its own independent audio device.
For original K3 radios and other earlier rigs without built-in USB audio, I
recommend the Microham Microkeyer-II. It ran my Yaesu Mark V based shack for
about 10 years, and I got the
I have a paid Dropbox account, supplemented by Microsoft OneDrive, folders for
which reside on my D: drive. All my data (including pictures, videos, music,
documents, and work projects) go in there AND get backed up to a local NAS for
redundancy. The OS partition (C : drive) including all
direction to the Cat-6 and a few ferrites I think I’ll be OK
in that area. It’s just the dust contamination I’m concerned about.
- pjd
From: Bob Wilson, N6TV
Sent: Wednesday, June 10, 2020 9:10 PM
To: Peter Dougherty ; Elecraft Reflector
Subject: Re: [Elecraft] A couple of KPA1500 remote
extension cable down from the Y-box to the amp, but I'm pretty sure
that will violate all kinds of fire regs. Not sure how I can do this.
-
73 and Good DX
Peter, W2IRT
President, North Jersey DX Association
DXCC Card Checker
Letter O Manager, ARRL
e
software.
-
Please and thanks.
Peter, W2IRT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
ave a look into for sure!
Best regards
Peter
-Ursprüngliche Nachricht-
Von: g...@gmx.net [mailto:g...@gmx.net]
Gesendet: Dienstag, 9. Juni 2020 22:21
An: Peter Kaletsch ; elecraft@mailman.qth.net
Betreff: Re: [Elecraft] K3 working on motorboats - possible
Hello Peter,
I think it depen
No chance hihihihihi :-)
-Ursprüngliche Nachricht-
Von: W2xj [mailto:w...@w2xj.net]
Gesendet: Dienstag, 9. Juni 2020 22:18
An: Peter Kaletsch
Cc: elecraft@mailman.qth.net
Betreff: Re: [Elecraft] K3 working on motorboats - possible
marry a ham! :-)
Sent from my iPad
> On Jun 9, 2
I agree, but I think that's a common issue for married hams! Happy wife, happy
live :-)
73, Peter
-Ursprüngliche Nachricht-
Von: W2xj [mailto:w...@w2xj.net]
Gesendet: Dienstag, 9. Juni 2020 18:34
An: Peter Kaletsch
Cc: elecraft@mailman.qth.net
Betreff: Re: [Elecraft] K3 working
stuff to do,
before focusing on ham radio on board).
Further answer are highly welcomed
73, Peter
-Ursprüngliche Nachricht-
Von: Kurt Pawlikowski [mailto:ku...@pinrod.com]
Gesendet: Dienstag, 9. Juni 2020 03:16
An: Peter Kaletsch ; elecraft@mailman.qth.net
Betreff: Re: [Elecraft] K3 working
Hi Bob;
Thanks a lot! An automatic tuner also was my first idea and I hope, I'll catch
up here still some motorboat experience form usage of external tuners for this
purpose.
73, Peter
-Ursprüngliche Nachricht-
Von: ROBT E WOODWARD JR [mailto:bobwoodw...@mac.com]
Gesendet: Dienstag, 9
...
Best regards
73, Peter
-Ursprüngliche Nachricht-
Von: W2xj [mailto:w...@w2xj.net]
Gesendet: Dienstag, 9. Juni 2020 00:55
An: Peter Kaletsch
Cc: elecraft@mailman.qth.net
Betreff: Re: [Elecraft] K3 working on motorboats - possible
try and AX1 with a tripod mount mounted to the boat
grateful for every tip and every help - also to
pkalet...@kaletsch-gmbh.de
Thanks in advance
Peter - DL1MDZ
Peter Kaletsch GmbH | Fürstenrieder Straße 275 | 81377 München | Tel: +49 (0)
89 / 89 60 93 - 0 | Fax: +49 (0) 89 / 89 60 93 - 99 | i...@kaletsch-gmbh.de
Ouch! I'll get a few of these but reserve them for anything in the air that's
difficult to access. I still have about 5 feet of the Ancor marine heat shrink
for anything at ground level.
- pjd
-Original Message-
From: Grant Youngman
DigiKey has it in 6” or 8” pieces of various
My whole ground system is Cadweld bonded. I bought the new style shots and
purchased the igniter from Joel and the RF Connection in MD. Couldn't have been
happier. And they're fun to fire off, too!
- pjd
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Grant
B6Jgw
73
Frank
W3LPL
- Original Message -
From: "Peter Dougherty"
To: "Edward R Cole" , "Elecraft Reflector"
Sent: Thursday, June 4, 2020 3:01:59 PM
Subject: Re: [Elecraft] FIXED--was NOT the feedline
Ed, this is the stuff I use on my outdoor connec
This is my default procedure, but every so often the knife slips when I'm
removing it and I end up slicing into the cable jacket itself. Usually no big
deal; cut it and pop on a new connector, but if it's on the antenna end it's
not so trivial.
- pjd
-Original Message-
From:
-Original Message-
From: Dave Cole
Sent: Thursday, June 4, 2020 10:59 AM
To: Peter Dougherty ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] FIXED--was NOT the feedline
I have that same problem, maybe 1 in 10 or 2,0 I slice the cable or my hand...
;)
73, and thanks,
Dave (NK7Z)
https
Ed, this is the stuff I use on my outdoor connectors:
https://tinyurl.com/y7uqqwsb
Marine grade adhesive lined. 3/4" for plain ol' PL259 connections, and 1"
for N connectors.
And I mis-spoke (mis-typed??) earlier. Had a senior moment when I said
Scotch 130 and Scotch 88 was my default. That HAD
on installation that you want to observe.
>
> Someone will chime in with deatil or a reference to a procedure... If
not, I will do it later... Class in 3 minutes.
>
> 73,
>
> __
> Clay Autery, KY5G
> (318) 518-1389
>
> On 06/03/20 10:3
. Director, NW Division, Technical Resources
On 6/2/20 8:15 PM, Peter Dougherty wrote:
> HI all,
>
> A postscript to the problem. First off, a huge thank you to the many
replies received. I was fortunate that the problem was not in the KPA-1500
as I'd originally feared.
>
> Much
HI all,
A postscript to the problem. First off, a huge thank you to the many replies
received. I was fortunate that the problem was not in the KPA-1500 as I'd
originally feared.
Much troubleshooting within the past few days. Originally the amp was "iffy" on
the old M-squared 6m5, and
lem solved.
>
> 73
>
> Bob, K4TAX
>
>
> On 6/1/2020 10:08 PM, Jim Brown wrote:
> > his might be it, Peter. ! I've used (and loved) the Ten Tec 229 and
> > 238 tuners, but some of their fixed capacitors are under-rated for
> > power. This is fairly well known among T
It's a BIT better on ANT-2, but still faults out on occasion, and I'm not
getting a true SWR reading. It is slightly more stable, though, to answer your
question.
- pjd
-Original Message-
From: Vic Rosenthal
Sent: Tuesday, June 2, 2020 1:01 AM
To: Peter Dougherty
Cc: Jack Brindle
rude and in self denial of the issues I raised.
In hindsight I should have saved a heap of money and gone with MFJ.
On 2/6/20 1:08 pm, Jim Brown wrote:
> On 6/1/2020 5:47 PM, Peter Dougherty wrote:
>> Ten-Tec Tuner,
>
> This might be it, Peter. ! I've used (and loved) the Ten Te
through the main antenna switch will help--I'll find out
tomorrow.
- pjd
-Original Message-
From: Jack Brindle
Sent: Monday, June 1, 2020 9:29 PM
To: Peter Dougherty
Cc: Elecraft Mailer
Subject: Re: [Elecraft] NOT the feedline
Is it the 3 element 6m LFA? That is an interesting
without having to worry about
hard faults all the time then I'll take that as a tradeoff.
- pjd
-Original Message-
From: Jack Brindle
Sent: Monday, June 1, 2020 6:09 PM
To: Peter Dougherty
Cc: Bob McGraw K4TAX ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] NOT the feedline
Lets take
e rise is somewhat expected, I feel it's
> a bit higher over a short period than I would like and may be due to
> reflected power.
>
> 73,
>
> Alan. G4GNX
>
>
> -- Original Message --
> From: "David Olean"
> To: "Peter Dougherty"
&
The balun (1:1 current choke here) is a red herring.
If you follow this thread all the way back, you'll see that the previous
antenna was not balun fed, and it used a length of 75 ohm cable and stubs to
match. And in this case the balun is made by InnovAntennas, specifically for
this antenna
I have never driven the amp with 90 Watts. Ever. The 90W figure is what comes
out of the K3s *after* the amp has tripped out. With the amp in 'operate' I
feed it typically 25-35 Watts.
Here are the error codes, as requested (truncated for length--there are MANY
more):
441 20-06-01T01:02:22
:45 AM
To: Peter Dougherty
Cc: Adrian ; Paul Baldock ; Elecraft
Mailing List
Subject: Re: [Elecraft] NOT the feedline (was KPA-1500 faulting on 6m; SWR
issues)
I haven't seen a discussion of your grounding system or feedline length. 6M can
be picky. What does your ground system look like
-Original Message-
From: Vic Rosenthal
Sent: Monday, June 1, 2020 12:18 AM
To: Peter Dougherty
Cc: j...@audiosystemsgroup.com; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] NOT the feedline (was KPA-1500 faulting on 6m; SWR
issues)
Are you using the same output connector on the KPA1500
and it still sends 1400-1450 Watts up the pipe..
- pjd
-Original Message-
From: Adrian
Sent: Sunday, May 31, 2020 11:05 PM
To: Peter Dougherty ; 'Paul Baldock' ;
elecraft@mailman.qth.net
Subject: Re: [Elecraft] NOT the feedline (was KPA-1500 faulting on 6m; SWR
issues)
To remove any doubt
. The only difference between "works reliably" and "faults out all
the time" is one is a resistive-only load, the other has a reactive
component.
- pjd
-Original Message-
From: Paul Baldock
Sent: Sunday, May 31, 2020 10:06 PM
To: Peter Dougherty ; elecraft@mailman
of the tower has been replaced with brand new everything. The fault
conditions are identical to what was happening beforehand.
- pjd
-Original Message-
From: Jack Brindle
Sent: Sunday, May 31, 2020 9:38 PM
To: Peter Dougherty
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft
Many here suggested that it was most likely a feedline issue, and I figured
this was indeed a distinct possibility.
So this afternoon I replaced the feedline. I now have about 80 feet of brand
new LMR-400, new 83-SP1 connectors (and an Amphenol adaptor at the balun
since I don't have any type-N
/8" hardline and
RG-213 at the moment. Any thoughts on what might be going on here? Is there
a known-issue on 6m with the KPA?
-
73 and Good DX
Peter, W2IRT
President, North Jersey DX Association
DXCC Card Checker
Letter O Manager, ARRL Incomin
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Class D and E are home stations. They certainly began setting up long
before the Friday of FD weekend. They don’t get the extra hours to operate.
Peter W0LLN
On Mon, May 25, 2020 at 9:08 AM Andy Durbin wrote:
> The field day rules need to be reviewed and corrected, not just for
> a
to be expected, alas.
- pjd
From: Morgan Bailey
Sent: Saturday, May 23, 2020 2:11 PM
To: Peter Dougherty
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA-1500 power supply fan noise
Head to walmart and buy a box of cheap hot pink foam ear plugs that have 30 db
noise
to be expected, alas.
- pjd
From: Morgan Bailey
Sent: Saturday, May 23, 2020 2:11 PM
To: Peter Dougherty
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA-1500 power supply fan noise
Head to walmart and buy a box of cheap hot pink foam ear plugs that have 30 db
noise
I'm experiencing something similar. I have my sub-2 output connected to bass
shakers on my sofa, and the wiring picks up an incredible amount of RF on
20. As my wife found out when she was taking a nap in the room while I was
contesting. As soon as I switched to 20 she was getting rumbled to the
1 - 100 of 1038 matches
Mail list logo