t; Hi Rich,
>
> Just download the latest beta firmware using instructions on our K3
> software page. Email supp...@elecraft.com mailto:supp...@elecraft.com if you
> have any difficulties.
>
> Wayne
> N6KR
>
>
> http://www.elecraft
uggestions as to how to get the 'AR0' and 'AR1' commands to work so I can
use them in a macro? Could I have a bad EEPROM?
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
tried shunt feeding your grounded tower, give it a try. You may
be surprised at how well it can work on 160 Meters.
73,
Rich - K1HTV
= = =
Erik, K7TV wrote:
Years ago, after putting up a heavy-duty crank-up tower with several
antennas on a tall mast at the top, I was interested in loadi
there
is no Es propagation. Have fun on the Magic Band.
73,
Rich - K1HTV
www.qrz.com/db/K1HTV
= = =
Sent from my iPhone
> On Aug 22, 2016, at 9:32 AM, Gary Smith <g...@ka1j.com> wrote:
>
> I've made exactly five 6M contacts in the last 36 years, all of them
> a couple month
K3, a great radio!
73,
Rich - K1HTV
= = =
Gary, KA1J wrote:
I'm not the one here with the most money,
I'm absolutely positive of that, but that
said; I can buy any rig I want and the
dollars spent wouldn't in any way affect
me, or anything I do in the future.
I just bought a K3S bec
ds or so. Some times a partial syllable burp is heard.
What would it take to correct this DVR anomaly so voice messages can be chained
in the same way as CW memory messages?
73,
Rich - K1HTV
__
Elecraft mailing list
Home:
the necessary voltage. GL.
73,
Rich - K1HTV
= = =
I am trying to use the Tx Inh (pin 7 of ACC) to allow the K3 to xmit only
when my 2M EME sequencer allows. In testing out this function, I find that
when Inh Hi or Lo is used, once you apply a logic change to pin 7 the Tx
Inh will lock
that when I wrote the
macros a few years ago I confirmed that such a command it wasn't available.
Thanks for a great radio. Next thing to do, after the dust settles, is to
upgrade the sync boards used for the main and sub receivers.
73,
Rich - K1HTV
= = =
Rich,
Thanks for re-posting
PF1 or PF2
key press. Have fun playing with them, without as many headaches that I had in
learning how to get them to work.
73,
Rich - K1HTV
For those of you who want to play more with macros, here are four that I use to
set up my K3 for USB, CW, DATA-A and RTTY. Parameters that are set up
John, we on the Elecraft reflector can't help you, but there are some folks in
Nigeria, who write to most of us, who say that they have millions of dollars.
I'm sure that they would love to send you some money to help you out. :-)
73,
Rich - K1HTV
= = =
John Lawrence via Elecraft wrote on 1
connected. Its just too impractical to disconnect
everything.
Just make sure that your household insurance is paid for and that it covers
lightning damage.
73,
Rich - K1HTV
= = =
This sounds like good advice. However, every connector socket on my K3
is populated, ditto the computer, ditto
in certain countries.
The list of countries which the U.S.A. has 3rd party agreements with can be
found at:
http://www.arrl.org/third-party-operating-agreements
73,
Rich - K1HTV
= = =
Many thanks to all the Elecrafters who answered the boys' calls this morning.
They successfully completed
Mark,
Try using LPBRIDGE. It allows you to use one com port for multiple
applications.
73,
Rich K1HTV
- Original Message -
From: elecraft-requ...@mailman.qth.net
To: elecraft@mailman.qth.net
Sent: Tue, 26 Nov 2013 17:00:11 - (UTC)
Subject: Elecraft Digest, Vol 115, Issue 39
David,
I checked the Sept., Oct. and Nov. issues of QST, looking for your article
about long term calibrated recording of noise but couldn't find it. Also
couldn't find any mention of 'Citizen Science'. Where can we find your article ?
73,
Rich - K1HTV
= = =
- Original Message
, was distorting the beam's pattern in certain directions.
Hope that you found this K3 information of some use.
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
each one
into the 'K3 Utility'. But doing it manually is really a pain. We should be
able to copy the saved data back into the K3 Utility.
I hope that this capability can be implemented in a future version of the 'K3
Utility'.
73,
Rich - K1HTV
. The chance of
corrupting the registry might be too risky for most K3 users. I still feel that
the suggestions for incorporating the capability of saving and loading files
through the 'K3 Utility' should be given serious consideration.
73,
Rich - K1HTV
= = =
- Original Message -
From: Dick
as the pileups surely will be huge. You
can read up on the P5 Project at:
http://www.intrepid-dx.com/p5/news.php
73,
Rich - K1HTV
PS
P5 is the only DXCC entity I still need for DXCC HR#1 with 100 Watts. My K3
will be ready if/when a No. Korean Ham station finally shows up
-results.html
John's test results and graphics make for even more interesting reading on the
topic of UHF connectors.
73,
Rich - K1HTV
= = =
On 4/27/2013 8:10 AM, riese-k3...@juno.com wrote:
http://www.wa1mba.org/UHFconn.htm
This is an excellent piece of work, Bob. Very solid science and very
of calling, I managed to break the
Clipperton DXpedition pileup to work TX5K for 160M QRP country #89.
Thank you Elecraft for a great communications tool!
73,
Rich - K1HTV
= = =
The very first QSO with my K3 was TX5K on 6m off the moon. Nice way to
break it in!
73,
Josh W6XU
On 3/5/2013
.
Is it only me, or are there other K3 (w/SUB receiver) contest ops who would
like this firmware change?
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
are interested in the one-button
multi-macros, drop me an email.
73,
Rich - K1HTV
K3 MACROs info on how to use them.
The K3 Utility is used to create K3 macros and easily upload them to the K3 via
one of your computer COM ports. If you haven't yet downloaded
pot to set levels if you use Line Input.
For those who are interested in writing macros for the K3 or KX3, you can
download the K3/KX3 Programmer's Reference at:
http://www.elecraft.com/manual/K3KX3%20Pgmrs%20Ref,%20E2.pdf
73,
Rich - K1HTV
= = =
On Dec 7, 2012, at 11:07 AM, W0SD Ed Gray wrote
the REPEAT is
replaced with the VFO-B frequency. After a delay after tuning is stopped, the
word REPEAT could be re-displayed to remind the op that the K3 was still in
that mode.
73,
Rich - K1HTV
W3LPL 160M op
- Original Message -
From: elecraft-requ...@mailman.qth.net
To: elecraft
it from
happening?
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
. Once my
primary scan storage memory #99 is set, here are the keystrokes used to quickly
start a scan:
Tap MV
Tap MV
Tap SUB to turn on sub receiver if desired
Hold SCAN
I hope that you find this info to be useful.
73,
Rich - K1HTV
software brains in the
white lab coats get paid the big bucks :-).
73,
Rich - K1HTV
= = =
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Wednesday, July 11, 2012 20:15
To: Rich - K1HTV
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Toggle macros
Rich
properly.
73,
Rich - K1HTV
= = =
-Original Message-
From: Jim Leder [mailto:k8...@fuse.net]
Sent: Wednesday, July 11, 2012 14:02
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 macro help
I am trying to write 2 simple macros and assign them to PF1 and PF2. The macros
, there is not reason why these memories can not be written over
for the next batch of 8 different macros to be assigned as multiple macros to
other 1-8 or PF keys.
73,
Rich - K1HTV
= = =
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Wednesday, July 11, 2012 14:13
.
*** NOTE***
When writing lines of multi-line toggling macros, make sure the number for the
macro number following the MN110; is the macro number for the following line or
the toggle feature will not work.
Hope you find this info useful.
73,
Rich - K1HTV
= = =
-Original Message-
From
Thanks to VE3KI who caught a typing error in the second line of commands of the
original Triple Macro. The following is a corrected version.
73,
Rich - K1HTV
= = =
After seeing the note about creating a macro to toggle between two power levels
on the K3, I thought I would try writing a macro
appreciate it if this request would be
considered for a future software revision.
Thanks and keep up the great work at Elecraft.
73,
Rich - K1HTV
= = =
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Monday, July 09, 2012 20:33
To: Rich - K1HTV
Cc: Elecraft
certainly am enjoying mine.
73,
Rich - K1HTV
= = =
-Original Message-
From: Richard Ferch [mailto:ve3...@storm.ca]
Sent: Saturday, June 09, 2012 21:33
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 2m Transverter keeps switching back to 6m
Do you have any software with radio
in.
73,
Rich - K1HTV
= = =
-Original Message-
From: Matt Murphy [mailto:m...@nq6n.com]
Sent: Wednesday, March 21, 2012 15:24 PM
To: Elecraft Reflector
Subject: [Elecraft] two k3's on the same band
Just wondering if anyone has any experience using two K3's on the same band (for
example, one
the K3 happy with the load that it sees.
If you don't have the internal K3 ATU, then you will either need to install one
or use an external antenna tuner to provide the proper match for the K3.
73,
Rich - K1HTV
= = =
-Original Message-
From: KC6CNN [mailto:kc6...@gmail.com]
Sent: Sunday
.
http://www.ab4oj.com/dl/sprat_zs6bkw.pdf
http://www.w5ddl.org/files/Zs6bkw_vs_G5rv_20100221b.pdf
73,
Rich - K1HTV
www.k1htv.us
= = =
-Original Message-
From: raro...@comcast.net [mailto:raro...@comcast.net]
Sent: Friday, March 09, 2012 2:38 AM
To: Elecraft Reflector
Subject
on your
mode/frequency preferences.
To quickly switch to one of the M1-4 memories:
Tap the MV button once.
Tape the M# (1-4) once.
This will allow you to quickly move you between frequencies and modes on each
band.
I hope that you find this info useful.
73,
Rich - K1HTV
= = =
-Original
.
73,
Rich - K1HTV
= = =
-Original Message-
From: Cady, Fred [mailto:fc...@ece.montana.edu]
Sent: Friday, January 27, 2012 16:21 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] 30% off on the K3 book
Lulu has a 30% discount on The Elecraft K3: Design, Configuration and Operation
until
almost 54 years and loving my K3!
73,
Rich - K1HTV
= = =
-Original Message-
From: Ken G Kopp [mailto:kengk...@gmail.com]
Sent: Tuesday, January 24, 2012 11:56 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 spurious radiation?
There are -many- bogus spots showing up on the DX
to find noise
sources on power line poles.
In your case, if you can hear the noise on a portable AM radio at the breaker
panel, try killing power to one breaker at a time to see which one kills the
noise. Good luck in playing noise detective!
73,
Rich - K1HTV
= = =
From: riese-k3...@juno.com
it, but
that's another story.
73,
Rich - K1HTV
= = =
-Original Message-
From: gold...@charter.net [mailto:gold...@charter.net]
Sent: Saturday, October 15, 2011 12:15 PM
To: Elecraft
Subject: [Elecraft] 160m loop experiment a big failure
I set up a 160m loop in the yard to try one
to identify what is on the channel.
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
button pressed.
Try it and let me know if you also experience what I have observed.
73,
Rich - K1HTV
= = =
-Original Message-
From: Rick Prather [mailto:k6limae...@gmail.com]
Sent: Monday, September 19, 2011 21:52 PM
To: Rich - K1HTV
Cc: Elecraft List
Subject: Re: [Elecraft] K1HTV Re
it
allows the chaining of voice messages in the same manner as CW messages.
Thanks.
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
replies during after the
message ends I can not here him because the K3 hasn't yet switched back to
receive. Not good :-( .
Hope that this can be corrected in the near future rather than later distant
future. Thanks
73,
Rich - K1HTV
_
From: Gary Surrency [mailto:g...@elecraft.com]
Sent
on) which addressed the 6M ATU problem. The ATU in my K3 now
performs as it should on 6 Meters. Local friend K2PI also had the same problem
which was resolved with the BETA firmware update.
If your 6M SWR is good in the ATU BYPASS mode, drop Elecraft tech support a
note.
73,
Rich - K1HTV
increments than the present 100Hz. Being able to fine tune
the Hi and Low cut filters would really help to quickly and easily reduce QRM
that might develop either above or below the digital signal being copied.
I hope that this request can be implemented in a future revision of K3 software.
73,
Rich
can no longer roll off either
side of the passband as you could when PB CTL is configured to 50 Hz. Is this
an undocumented feature? If so, I think it is a bad one.
73,
Rich - K1HTV
= = =
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Tuesday, June 07, 2011 19
a less expensive,
unshielded in-line transformer would probably work just fine.
73,
Rich - K1HTV
= = =
-Original Message-
From: Jim Brown [mailto:j...@audiosystemsgroup.com]
Sent: Wednesday, June 01, 2011 13:04 PM
To: Reflector Elecraft
Subject: Re: [Elecraft] KX3 Audio output
On 6/1/2011 5
ones without affecting the weak signal's data.
I hope that this suggestion could be considered in a future K3 firmware update.
Have fun with JT65 as you watch the paint dry :-).
73,
Rich - K1HTV
= = =
-Original Message-
From: Jim Brown [mailto:j...@audiosystemsgroup.com]
Sent: Wednesday
Jim,
Looks like the addition of an inline audio transformer between the wireless
transmitter's miniplug and the KX3 (or any device powered by the vehicle) would
resolve the potential problem which you have addressed.
73,
Rich - K1HTV
= = =
-Original Message-
From: Jim Brown
countries
using JT65A. Once you figure it out, you should make plenty of contacts on this
neat mode.
73,
Rich - K1HTV
www.qrz.com/k1htv
= = =
-Original Message-
From: gold...@charter.net [mailto:gold...@charter.net]
Sent: Monday, May 30, 2011 22:04 PM
To: Max Kempson
Cc: elecraft
on an LCD screen
on the front of the unit. It looks like it should work fine with a KX3 or any
audio device that you want to play back on a clear frequency through your
vehicle's FM radio.
73,
Rich - K1HTV
= = =
-Original Message-
From: Dave KK7SS [mailto:kk...@frontier.com]
Sent
a 2nd or 3rd time makes do
difference.
As you reported, this does not happen on any of the other HF bands.
73,
Rich - K1HTV
= = =
Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Friday, May 27, 2011 11:42 AM
To: Elecraft Reflector
Subject: [Elecraft] KAT3
horizontal) with 16 short (1/8
wavelength) radials.
The K3 worked great in last week's CQ 160M CW contest. It's great being able to
work with so may high power stations so close to my run frequency. The K3 is a
superb performer!
73,
Rich - K1HTV
= = =
-Original Message-
From: Dick Grolleman
Making a small incremental change in the power output using the PWR control
will cause the slow recovery if done before or during a WSPR transmission.
Is this normal?
73,
Rich - K1HTV
K3 #3657
__
Elecraft mailing list
Home: http
-Skip opening to Europe last June. I hope that this
summer's Es season is as productive as last year when I worked 44 countries
using my barefoot K3 and a yagi on the back deck, only 20 feet high.
73,
Rich - K1HTV
You can check out QSLs confirming my 6M WAC at:
www.qrz.com/db/k1htv
on the compromised computer. Trojan.ADH and Heuristic.ADH are
generic detection for a malicious files or computer virus with the same
functionalities and payload once executed on the system.
Not sure if it's a bogus message or is really a threat.
73,
Rich - K1HTV
= = =
-Original Message-
From: Jim
, it is always stored as 500 Hz. This is normally not a problem,
since this default BW is fine for RTTY reception.
Are these two noted anomalies bugs or features ? :-)
73,
Rich - K1HTV (Loving my K3!)
__
Elecraft mailing list
Home
can integrate what the left and right ears hear to
produce Q5 copy where using either separately would produce fractured copy.
Hope that these observations from my frequently using the K3 sub receiver are of
some help in making you KRX3 vs. P3 decision.
73,
Rich - K1HTV
www.qrz.com/db/k1htv
, as also occurred for my 160M QSO with Dave,
KH2/N2NL a few weeks ago. Thank you Elecraft!
73,
Rich - K1HTV
= = =
-Original Message-
From: Johnny Siu [mailto:vr2...@yahoo.com.hk]
Sent: Saturday, November 20, 2010 19:02 PM
To: Elecraft
Subject: [Elecraft] ZLX8 - K3 firmware
Hello Group
nil on the Beverages.
K3What a radio! Thanks for the Elecraft software brains for adding the APF
feature to an ever growing K3 bag of tricks.
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
should be able to work much more Europe
DX than down here in VA, and probably the same amount of DX to the south. Just
be patient. If you are at you K3 when the band opens up there you'll soon be
entering DX QSOs into the N1IX log.
Have fun with your K3 on the magic Band!
73,
Rich - K1HTV
.. I think that you will find
this site to be most helpful in catching band openings to your area.
Have fun with your K3 and low yagi on the 'Magic Band'.
73,
Rich - K1HTV
http://www.k1htv.us
= = =
Date: Thu, 1 Jul 2010 09:28:57 -0700 (PDT)
From: Lee Buller k...@swbell.net
Subject: [Elecraft] 6
1.97' bullet to view current paths reported open on
various VHF bands.
Enjoy your K3 on the Magic Band.
73,
Rich - K1HTV
http://www.k1htv.us
= = =
Date: Sun, 20 Jun 2010 09:25:33 -0500
From: Sam Morgan k5oai@gmail.com
Subject: Re: [Elecraft] 6 Meters
Cc: elecraft@mailman.qth.net
Message-ID
it back on I got two ERR
messages (sorry, I didn't write them down). I powered the K3 down then up a
second time, tried to reload only the DSP2 firmware and it took. All is well
now.
73,
Rich - K1HTV
= = =
Date: Fri, 28 May 2010 13:15:40 -0700
From: Clint clint.st...@sbcglobal.net
Subject
or even match
these specs!
73,
Rich - K1HTV
= = =
From: Don Rasmussen wb8...@yahoo.com
Subject: [Elecraft] OT: ROCKWELL automation at Dayton
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
While the Elecraft Booth was jammed at Dayton, this fellow was quietly
introducing the world
have this feature. A
simple click on that line will quickly put you on the correct frequency to
answer the CQ. If you haven't yet used Digipan, give it a try. It's a free
download from www.digipan.net .
73,
Rich - K1HTV
= = =
From: lstavenhagen lstavenha...@hotmail.com
Subject: Re: [Elecraft
.
One of the reasons why Elecraft is the great success that they are today is
because they listen to the suggestions and recommendations of the users of the
equipment that they manufacture.
73,
Rich - K1HTV
= = =
From: lstavenhagen lstavenha...@hotmail.com
Subject: Re: [Elecraft] CW/CW-REV
-REV) of tuning
into CW signals.
What say?
73,
Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Many Thanks Ted. Guess after the many reads of TFM I still missed it :-).
I'm heading off to my K3 to set the SPLIT option now. Thanks again.
73,
Rich - K1HTV
= = =
-Original Message-
From: Ted Roycraft [mailto:w...@comcast.net]
Sent: Wednesday, April 07, 2010 12:11 PM
To: Richard
be reduced with a good RF ground at the radio, using a resonant
antenna with low standing waves, adding coax chokes or installing ferrites on
antenna coax feedline. Your mileage may vary :-).
73,
Rich - K1HTV
= = =
-Original Message-
From: Bob Naumann [mailto:w...@w5ov.com]
Sent: Monday
' will be able to recreate the
problem and find a fix.
73,
Rich - K1HTV
-Original Message-
From: Tom W8JI [mailto:w...@w8ji.com]
Sent: Tuesday, March 30, 2010 9:46 AM
To: Rich - K1HTV; 'Bob Naumann'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] T32MI K3 rig problem
OK on seeing the problem
no difficulty in working T32MI on CW SSB with 100 Watts and a wire
antenna from my QTH in Virginia, my IOTA number 964. They are a great
operators!
73,
Rich - K1HTV
Retired from VOA
= = =
From a post of the K3 Reflector from Roland, DC1RS
2010-03-28 08:30
This morning local time (Saturday 21:00
They don't, but if it is triggered by RF, the proposed suggestion is simple one
and worth trying with available parts.
Rich - K1HTV
-Original Message-
From: Bob Naumann [mailto:w...@w5ov.com]
Sent: Monday, March 29, 2010 21:00 PM
To: 'Rich - K1HTV'; iz1...@tin.it
Cc: elecraft
tested your K3?
73,
Rich - K1HTV
_
From: WILLIS COOKE [mailto:wrco...@yahoo.com]
Sent: Tuesday, March 09, 2010 23:20 PM
To: Rich - K1HTV; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Audio dropouts while tuning in K3 SubRX
I checked my K3 and it does not seem to have that problem
great software designers to either
accept and implement the suggestion or reject it.
The topic has been thoroughly discussed.
What say Elecraft? Yea? Nay?
73,
Rich - K1HTV
Cwops #198
__
Elecraft mailing list
Home: http
at:
http://www.nonstopsystems.com/radio/ZS6BKW-2.pdf
73 de Rich - K1HTV
= = =
Date: Fri, 15 Jan 2010 23:48:00 -0500
From: Guy Olinger K2AV olin...@bellsouth.net
Subject: Re: [Elecraft] [OT] High SWR on 20 and 40
To: d...@w3fpr.com
Cc: elecraft@mailman.qth.net, djmd d...@fuse.net
Message-ID
users.
73, Rich - K1HTV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
the potential of it being the vehicle for disseminating valuable
technical and operational info for the multitude of K3 users.
Anybody interested in coming forward to start a K3 Wikipedia page?
73 de Rich - K1HTV
__
Elecraft mailing
Steve,
Thanks for the info on the K3 wiki info. I had searched the Wikipedia.org
web site and didn't find one for the Elecraft K3. Guess I should have
Googled it instead. Will have to check out the 'zerobeat.net' K3 wiki URL
that you posted in your note.
73,
Rich - K1HTV
= = =
-Original
81 matches
Mail list logo