ll just be frustrated.
Was looking to do a 60' tower for the high bands (I'll still be below the
lines height wise), multiband vertical (low bands 80/40/30) , and
dipole(80/40).
Vertical is planned to have 60 or more radials.
Thanks in advance.
Jerr
on the K3.
If I do this I believe I can get about an inch on the sides and maybe 2 or
more inches front/back/top/bottom.
Thoughts?
Thanks in advance.
De AE4PB
--... ...--
..
__
Elecraft mailing list
Home: http://mailman.qth.net/m
na.
Jerry Moore
AE4PB
>Jerry,
>Ignoring how you've set up your station for the moment (every station has
compromises but some push that to an extreme); the shutdown? of the
connection is likely that RF got into the USB cable (as demonstrated by the
hot >ferrite) which cause
amstick in the office as my antenna. I shut everything down
to cool off. Afterwards everything seems to be working correctly.
Any ideas?
Tnx and 73
Jerry D. Moore
AE4PB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/l
thing down
to cool off. Afterwards everything seems to be working correctly.
Any ideas?
Tnx and 73
Jerry D. Moore
AE4PB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
What's the best method to send high speed CW with a K3S via Computer?
Serial adapter to the Key port or software via USB or ??
73
Jerry D. Moore
..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
can still get the radial and coax work done.
Jerry – AE4PB
73
..
From: donov...@starpower.net
Sent: Friday, April 3, 2020 2:27 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 75ohm Impedance question K3S and Antenna side.
Hi Jerry,
What coax do you plan to use (manufacturer
So I found a formula for feedline length and just need some eyes on it to make
sure I applied it correctly.
I want to measure twice and cut once. Then I can use my antenna analyzer with
a dummy load on the line to trim it.
The columns are band, freq in Mhz, Multiplier to give multiples of the
ll have
> a decent transmitted signal.
> Thanks in advance.
> Yeah, I should know this stuff but I can't know everything 100%.
>
> 73 es
> De AE4PB
> ..
>
>
> __
> Elecraft mailing list
> Home:
o this? I'm trying to minimize losses
for the distance run and still have a decent transmitted signal.
Thanks in advance.
Yeah, I should know this stuff but I can't know everything 100%.
73 es
De AE4PB
..
__
Elecraft m
#x27;s night time, let's check
40m...odd, the Frequency shows 4xxxMHz... changed band to 40M, test mode,
CW, VIOLA!!! Sounds sweet!
I got a chuckle out of this. Missed the forest for the trees.
Hope someone got at least a smile.
73
Jer
De AE4PB
7;ve decided
to sell if anyone is interested. I had a member of the reflector call me
with a ton of good information/advice. I appreciate the community feel and
support.
73s
De AE4PB ..
__
Elecraft mailing list
Home: http://mailman.
y D. Moore
AE4PB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
You may want to consider exporting excel to CSV then opening in notepad,
copy/paste from that.
It's more readable/useable in a text based environment that doesn't support
HTML cells.
Just a thought.
Jerry Moore
Cell: 803-431-1870
-Original Message-
From: elecraft-boun...@mailman.qth.net
Aside from installing ferrite on all cables (not sure why this isn't
integrated somehow if it's that large of an issue) would having the shack
walls lined with a grounded screen help reduce/eliminate radio noise?
Is the cost/effort worth it?
My wife and I are planning to build a house in a few y
I called to order my vga card and some other parts which I needed tech
support answer, I sent an email yesterday and haven't heard back.
What's the expected response time?
Jerry Moore
Cell: 803-431-1870
__
Elecraft mailing lis
at-sheet anyone has for the P3?
Thanks in advance
Jerry Moore
AE4PB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.
.
I need to get over my key fright and get on the air a bit. Maybe Sunday
afternoon.
Es 73
De ae4pb ..
Jerry Moore
Cell: 803-431-1870
From: Phil Hystad
Sent: Tuesday, February 18, 2020 1:02 PM
To: ae...@carolinaheli.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Found
Thank you very much! I should have it connected and going before the end of
the week.
I am wondering if it's a good idea to buy a pre-owned VGA card for the P3,
that is of course if I can find one.
73
De AE4PB
__
Ele
WTB: Elecraft P3, P3SVGA, DCHF-200, P3TXMON (optional)
Shipped 29708
Respond off list please.
Jerry Moore
AE4PB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
when I can
buy a new HF rig with the Pan adapter built in for less.
Are there plans to have a sale or bigger discount?
My time frame for purchase is March. I'll probably be going to the
Charlotte, NC Hamfest for the purchase unless I'm on call that week.
Thanks in advance.
use a laptop for
logging and radio control anyway it's a nice setup.
Jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From
If you use a computer to control your rig, most of them can speak
mode/freq..etc..
If you don't use a PC look around for some RASPBERRYPI software to speak the
mode/freq..etc. Something like this has probably been done.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
probably buy it instead.
Thanks in advance.
jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
ew your operating procedures regardless of
the radio you use.
Kenwood makes a good radio, however, I've NEVER had good luck with service
from them or Yaesu. Based on my experiences in forums, reflector, and
talking with other hams; Elecraft is rabidly good about support.
Jerry Moore
CDXA, INDEXA,
an do.
You're lucky to have never had to send your Kenwood radio in for repair. You
typically end up sending it to a third party repair shop with the hopes they
know what they are doing and do more good than harm.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.
What issues are you experiencing? I'm running the latest HRD with Win 10 and
not having any issues. Are you running any type of port multiplexing
software? I don't recall the name, however, one popular one definitely isn't
stable on win10.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
A
but didn't
crimp or hold up the same. I ended up dumping them and ordering replacements
from powerwerx.
Just sharing my experience.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced
(consider the platform I flew on was from the 1960s).
Validate the connectors are rated for the wire gauge/type please.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patrioti
Ok, ty..
The only way I know of currently to save the settings out is to use HRD.
I'm actually writing a program in my spare time to see if I can write a
utility to read/write configs specifically for this purpose.
Jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
the issue then I'd start double checking the connections
per the assembly manual.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Ele
Does that imply we should all adjust our power supplies to output +15VDC?
Will that damage my 2M Rig?
I recently purchased the powerwerx SS-30DV from Elecraft when I purchased my
K3S kit.
Thanks
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An
(pre roofing filters), and being able to actually
hear the desired signal at to start.
Just curious because my prior radio did a decent job but nothing even close
to what my K3S does.
I have the 400Hz and 2.8KHz 8 pole roofing filters installed and use a
dipole for RX.
Jerry Moore
CDXA, INDEX
Sounds good, I guess I'll re-wire it internally as necessary.
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Sunday, October 25, 2015 2:08 PM
To: ae...@carolinaheli.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S Split Rx Ant2/Tx Ant1
Jer,
It all depe
rry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
havior *shrug*.
It's probably a good time for this one to close..
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecr
not your
intent.
Ask specifically for what you want or ask Eric to close the thread.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Bal
The new version or edition 2 for the K3?
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun
where with
others it needs to be engaged more. I'm enjoying the process of learning to
really use it.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-O
ker and see what it sounds like without being
installed. If that 'fixes" the issue then I'll investigate further. It's a
minor thing but something I want to resolve.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Conside
'll investigate further. It's a
minor thing but something I want to resolve.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From:
ers or even anything else for
that matter. Just guidelines and what's been usually done.
If we want more features in Elecraft gear it's probably a trivial thing to
just ask.
What CW features specifically are NEEDED but lacking?
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 01
Outstanding!! I’ll try that. I don’t listen to my rig often over the speaker as
I have some different hearing losses in each ear.
Jerry,
I have this buzzing in my K3, and have heard it in some (not all) of the K3s I
have built for friends. I have found that most of it comes from vibration
be
und speakers up for stereo and try that but am trying to
figure out what I did wrong in the meantime.
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced
plications, windows/mac/linux..etc..), how it's connected, and what the
end result is expected to be.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Me
LP-Bridge is not stable on windows 10 used with the newest ham radio deluxe.
It's been reported to be an HRD issue but I've had LPB crash on it's own
without anything else running on windows 10.
It likely needs an update.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S
I have the second edition of the book and am not finding the HRD method. Can
you please direct me to a page number?
Jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic
#x27;s not hard, just a
lot of work to setup once.
Let me think on it.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailt
ering is to remote my rig to my shop. Then I could have
a tower in the back yard without long feedlines (that contribute to signal
loss). Slowly looking at that. The Raspberry Pi hardware looks perfect as
the bridge platform.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http:
ch of it.
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] O
y Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Burdick
Sent: Monday, O
that pull the
signals out VERY WELL.
As expected the issues I'm experiencing are just learning curve type
opportunities. I'm glad I purchased the K3 book and have the K3S book on
pre-order. It's definitely worth having.
Jer
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N
be forwarded to their programmer and/or the reflector.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@
ar command for AGC TH it works
MN017;MP008;SWT14;
After evoking MN017;MP001;SWT14;
Issuing the commands MP; returns ?; which per the book indicates the radio
is busy.
I'm sure it's something I'm doing wrong.
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC
So you're saying that LP-Bridge isn't RFC compliant.. ok.. J
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
From: Tom [mailto:tom...@videotron
HAHAHAHA!! J
Open the google playstore and enter k-9 mail
..that's what I use.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
From: Phil Wheeler [mai
I use K-9
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark
K9BOO via
.
Firmware version MCU 05.35
Tnx.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
__
E
r NVIS and longer type contacts.
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
__
Ele
ype contacts.
Thanks in advance.
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
__
Elecraf
Trying to check in but only occasionally hear someone that sounds like net
control but not hearing any invites to check in
Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic
cept type
technologies to see if you like it.
Based on my experiments I'm sold on the concept and now just need to save up
the cash for the hardware.
Antennas are next on my list so the P3 gets bumped down a bit for now.
73 ..
Jerry Moore
CDXA, INDEXA, SKCC, Fists
The issue is likely because my dipole is oriented towards EU.. I need to lookup
the bearing from SC and probably move the ends of my dipole (not easily done).
Jer
-Original Message-
From: Jack Brindle [mailto:jackbrin...@me.com]
Sent: Saturday, October 10, 2015 3:51 PM
To: ae...@carolina
Not hearing them at all
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary
Sent: Saturday, October 10, 2015 2:43 PM
To: Wayne Burdick; Wes (N7WS)
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] TX3X K3/KPA500 DXpedition to Chesterfield Isla
The MFJ unit sold by HRO works on windows 10.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alfredo
Velez WP3C
Sent
m to go out of their way to
make it difficult for you to get anything under warranty.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-bou
Scott at Vibroplex has excellent customer service and his products are
awesum!!! I look forward to seeing what's next for Inrad. I expect Scott will
take it to the next level for sure.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net
rity has changed from
"need/very nice to have" to "want/integrated feature".
Comments/suggestions on or off-list welcome. Probably best to answer off
list.
Thanks in advance.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - C
Operator error. I somehow had Ant 2 selected which begs the question as to how
I was receiving signals at all (nothing is connected to ant 2). Selecting the
actual antenna and such works 100%.
From: Bob McGraw - K4TAX [mailto:rmcg...@blomand.net]
Sent: Friday, October 02, 2015 10:57 PM
To
Bill,
What's required to maintain the site and how much do you want for it?
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill
Sent: Sunday, October 04, 2015 9:51 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] For C
t a higher signal level with the ATU tuned than bypassed?
Thanks in advance.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
__
Elecraft mailing
I just got mine with my K3S and haven’t even noticed it other than the power
lamp being on. No issues or power drops at full power out.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jorge Diez - CX6VM
Sent: Friday, Octob
Ouch
Please discontinue this thread. I'll keep the rest of what I want to say to
myself.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Merv Schweigert
Sent: Thursday, October 01, 2015 1:30 PM
To: elecraft@mailman.qth.net
I find the audio FX delay feature really makes a huge difference in my
headset. I'm not sure how/why but I hear and copy better with it turned on.
I currently run the delay at 5.
Jer
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Beh
Part of my confusion is based on this being a commercial solution that
didn't have a problem until recently. One thing I've thought of is that my
TV configuration may have changed with the addition of a Chromecast..etc..
so I'll be doing a clean setup troubleshooting here soon (remove everything
ex
le is broadside to 45 degrees for EU coverage.
>
>
>
> Thanks in advance. I've read A LOT on grounding but haven't seen this
> scenario covered.
>
>
>
>
>
> On another note I appear to have an allergy
have an allergy to my key. I just can't bring
myself to get on the air with it. I need the practice to get my speed.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
___
just a learning process and I've tried several
> websites on setting up for RTTY with no success. Anyone have a good
> guide on the K3/S with/without HRD on RTTY?
>
>
> Thanks in advance.
>
>
>
>
>
> Jerry Moore
>
op and bottom pass visual and pass
sniff test. I have noticed that my Mag Loop controller is acting funny so
maybe I'll get lucky and that is it.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message--
he width/filter..
I'm sure this is just a learning process and I've tried several websites on
setting up for RTTY with no success. Anyone have a good guide on the K3/S
with/without HRD on RTTY?
Thanks in advance.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loy
Unfortunately you are right. I just don't like it ;)
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill
Sent: Thursday, September 24, 2015 12:00 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Price Increase Alert for mid October
Infl
Jim,
I do have a clue on Ca. It's a great place to live but expensive as heck
compared to most places except maybe NYC. San Diego is one of my favorite
places to live.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Brown
Sent: Thursday, Sep
Kent,
No I haven't because there aren't many places with a higher standard of
living. In fact I don't know of any other area that enjoys high employment
rates in high paying positions, lower cost of living/taxes, lower crime. Why
would I want to move somewhere with higher taxes, crime, and unemp
Have you guys considered moving the company to a state with a lower cost of
living?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
Swartz - WA6HHQ, Elecraft
Sent: Wednesday, September 23, 2015 8:55 PM
To: Elecraft Reflector Reflector
Subject:
Ok, the manual is wrong. I got it..ty ;)
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle
Johnson
Sent: Wednesday, September 23, 2015 10:48 AM
To: ae...@carolinaheli.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S PTT using DTR/DTS iss
What I'm trying to do:
1. USB for audio and serial control.
2. RS232 for PTT keying.
Everything is the same power, I'll pull the cover and reconnect everything
at lunch and see what I get.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle
Johnso
ng the type of person who checks and double checks
> things I can find nothing wrong with what I did and yet apparently
> I've damaged something.
>
>
>
> Tomorrow I'll pull the cover and c
to Serial cable (MFJ I
believe).
I'm heartsick. Being the type of person who checks and double checks things
I can find nothing wrong with what I did and yet apparently I've damaged
something.
Tomorrow I'll pull the cover and check the board.
Jerry Moore
AE4PB, K3S - S
When you turned it off did you turn off the rig or the powersupply?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ralph
McClintock
Sent: Tuesday, September 22, 2015 2:33 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 No RX & No RF output
I'm eventually wanting to play with Sats so I'll need a full duplex 2m/70cm
anyway.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
McGraw - K4TAX
Sent: Tuesday, September 22, 2015 9:40 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3
Had I remembered I would have attempted to check in. Maybe next weekend if
I'm not out of town.
Jerry Moore
AE4PB, K3S - S.N. 010324
An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft
y, September 18, 2015 6:22 PM
To: 'Phil Wheeler'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Digital Voice Mode - our future?
Ah..when I do that folks send QLF...what the heck is that ??? LOL.. :D Jer
Jerry Moore
AE4PB, K3S - S.N. 010324
-Original Message-
From:
Yep, when I got my extra 20wpm was still required.. I'm guessing it wasn't but
a few years after that the requirements started dropping.
Jerry Moore
AE4PB, K3S - S.N. 010324
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
McGr
Ah..when I do that folks send QLF...what the heck is that ??? LOL.. :D
Jer
Jerry Moore
AE4PB, K3S - S.N. 010324
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil
Wheeler
Sent: Friday, September 18, 2015 7:59 PM
To: elecraft
K3 Digital Voice Mode - our future?
What is this microphone thing? Is that a new kind of key?
:p
Jerry Moore
AE4PB, S.N. 010324
On September 18, 2015 7:09:56 PM EDT, Gary wrote:
Aah Jim,
Yes, "Emergency Nets" and SSTV, it is stunning how you here a dx station
calling, you an
correctly...
Jerry Moore
AE4PB, K3S - S.N. 010324
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Edward
R Cole
Sent: Friday, September 18, 2015 2:00 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Product Suggestion - 500W Dummy Load
Don'
is that much of the younger
generation are more into the operational than the "here's out it works and
why". If you approach them with kindness and a helpful attitude you'll find
that you can get it all done while making a new friend ;).
Jerry Moore
AE4PB, K3S - S.N. 0103
for VHF FM for hams.
ae4pb wrote
> I'm wondering since Digital voice is replacing FM around the world how
> hard it would be to add another mode to the K3S? I'm not even sure
> what the standards are but one country just set the date to get rid of
> FM permanently and s
I'm wondering since Digital voice is replacing FM around the world how hard
it would be to add another mode to the K3S? I'm not even sure what the
standards are but one country just set the date to get rid of FM permanently
and switch to DV.
Jerry Moore
AE4PB, K3S -
st playing with the
menus and getting familiar with it all. Once I get off work I'll connect my
PC with the K3 Utility and see what I can see. I only like mag trays when
I'm doing assembly or maintenance where I'd have a bunch of hardware out
(especially small in size).
Jerry Mo
1 - 100 of 159 matches
Mail list logo