"IQ streaming data from the K4 will be available over Ethernet"
I saw this quote from Wayne in some posts in this Group a few years back.
Has there been any recent updates on this capability?
73 Paul w2eck
__
Elecraft mailing list
Home:
Thanks to all for the advice and suggestions. Will be out of pocket for a
day or so, but you have given me lots of areas to checkout and
troubleshoot. Will let you know what I find out.
73 Paul w2eck
__
Elecraft mailing list
Home:
2024 at 5:13 PM Ken Winterling wrote:
> Paul,
>
> Connect a dummy load in place of the antenna and repeat your testing.
> This will eliminate the antenna as a possible source of RFI.
>
> Report the results of your tests,
>
> GL!
>
> *Ken*
> *WA2LBI*
>
>
>
I am experiencing a new problem for me, with my KAT 500. So far I've
noticed this issue on 30M. I am using a dipole cut only for 30M with an SWR
of 1.2 to 1.3 max SWR across the band. I “trained the tuner” at 20khz
segments on 30M.
Setup is K4D, KAT 500 & KPA 500. Win 10 pc.
Running CW, I can
Off List is fine, email good in QRZ.
73 Paul w2eck
On Wed, Oct 18, 2023 at 1:23 PM Paul Ecker wrote:
> A current Flex 6600 owner about to buy K4D and would like to hook up with
> someone who may have made the same transition to exchange
> thoughts/experiences .
>
>
A current Flex 6600 owner about to buy K4D and would like to hook up with
someone who may have made the same transition to exchange
thoughts/experiences .
73 Paul
w2eck
__
Elecraft mailing list
Home:
In the KAT 500 Utility – Configuration- Antennas- Band- 17M;
I have Antenna 3 checked as Enabled and Antenna 3 as Preferred. No other
antennas are selected for 17 m. This configuration has been applied and
saved. Setup is Flex 6600, KAT500, KPA500 & win 10 pc.
The problem I am having is: with
Thanks to all those who responded with suggestions on how to replace the
Ear covers. Ordered the Koss replacement covers. The links to videos
included, will be a great help in the actual replacement process.
73 Paul w2eck
__
Elecraft
Realize this subject has been around before, most of postings in archives
are dated. Does anyone have a good current source for replacement ear
covers for the Yamaha CM 500 Headset?
73 Paul w2eck
__
Elecraft mailing list
Home:
Thanks to everyone who replied with their experiences and also, that I
should have RTM first :0))
73 Paul w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I am re-arranging the shack desk. Is anyone stacking the KPA500 on top of
the KAT 500? Any weight or heat issues ? Or is it ok to do?
73 Paul w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Thanks to all that responded to my T1 Tuner question. Turns out the one I
was asking about, that I bought thru QRZ Swapmeet would not tune, but the
seller immediately refunded my money via PayPal. The second offer of a T1
also via QRZ turned out to be a scam. So enough, just ordered a brand new
T1
I just purchased a T1 Tuner from a fellow Ham. In reading the manual, it
says:
*To start tuning, transmit while the green LED is flashing (about 3
seconds). If you use SSB voice or a CW keyer, relay switching will start
and stop. Keep transmitting until all LEDs turn off.*
I am not hearing or
Thanks to Elliott WA6TLA steering me to the TriState Camera website, just
ordered the MDR-7506's for a great price. Thanks again to all for the
great advice.
73 Paul w2eck
__
Elecraft mailing list
Home:
Well seems like the Sony MDR-7506 is the way to go. Thank you to all for
the recommendations and explanations on why.
73 & Be Safe
Paul
w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Know this is a well worn out subject. But looking for a reasonably priced,
but comfortable set of headphones. Just the headphones, don't need a mic. A
set that is lightweight enough to wear for a few hours but reasonable
performance. Any recommendations?
73 Paul w2eck
, Aug 6, 2020 at 2:21 PM Paul Ecker wrote:
> I have installed the KAT500 software on both my main shack PC and on to
> a Win10 Notebook I use for remote ops. I want to be able to change antennas
> on the KAT 500 from the Notebook PC. So I start the Remote software on the
> shack P
I have installed the KAT500 software on both my main shack PC and on to a
Win10 Notebook I use for remote ops. I want to be able to change antennas
on the KAT 500 from the Notebook PC. So I start the Remote software on the
shack PC, configure the Host data and then connect which it does. Then
ds you are
> having problems with. Either that or no PTT signal on those bands. If this
> is configurable in the radio, then find the selection and set i two its
> proper value. Otherwise try to figure out why no rf is going out on those
> bands.
>
> 73!
> Jack, W6FB
>
>
> &g
f the amp doesn't switch this points to the
> radio.
>
> Recheck all of your CONFIG settings in the radio.
>
> Looks like a call to Elecraft is in order.
>
> Bob, K4TAX
>
>
> Sent from my iPhone
>
> > On Jun 2, 2019, at 9:31 AM, Paul Ecker wrote:
> >
>
Andy - thx for reply. The KAT Utility Operate Tab follows the last RF Tx
frequency. It does not follow the rig freq. But does not follow when
Tx'ing on 40 or 160.
73
Paul
"Additionally have noticed that my KPA500 is not sensing and changing bands on
40 or 160m. "
With the KAT500 utility
Bob - radio is a Flex 6600, so not using a ACC cable per se. What's curious
is that the Flex/KPA500/KAT combo work fine all all other bands except 40 &
160 ?? And that radio tunes these bands and transmits just fine with KAT in
bypass??
tnx & 73
Paul
w2eck
*>From your earlier with the tuner and
Bob - checked all the cables - all tigh and well seated. Still same problems
73 Paul w2eck
*Paul:I would check the cables to be sure they are correctly seated
and secured for the ACC buss from the radio to the ATU and KPA500. It
maybe that the radio is not sending the commands to the ATU
Bob- followed your suggestion and edited the KAT configuration Antenna tab
to: Bands – ALL ; Enable - now have 1 2 and 3 checked and for Preferred –
Last Used. Then saved the configuration. It had no effect on the problem
- I still can not select ant 3 for 160. In fact even after making
Bob- I tried doing the procedure just as you described, it works fine on
all bands except 40 and 160. In the KAT 500 utility I activated all
antennas for both 40 and 160 to see if it had any effect- it did not. What
other settings in the KAT Utility would you check? I still can't switch
the KAT
I am experiencing some strange behavior on my KAT500. Station is Flex 6600,
KAT500 and KPA500. Three antennas hooked to KAT: 1) Hex Beam 2) 6-80 EFHW
3) 160M Inverted L. In KAT Utility, ant 3 only enabled for 160. Ant 2 only
configured for 40M. Two “problems”:
First, With radio on 160M -KAT
art the computer.
>
> 73,
> Don W3FPR
>
> On 2/14/2019 9:33 AM, Paul Ecker wrote:
> > My KAT500 has stopped communicating with my Win 10 PC. I have tried two
> > different KXUSB cables. When connected, neither show up in the Windows 10
> > Device Mgr Ports list. This prob
My KAT500 has stopped communicating with my Win 10 PC. I have tried two
different KXUSB cables. When connected, neither show up in the Windows 10
Device Mgr Ports list. This problem has only occurred in the last week.
Prior to that had been working fine. Otherwise KAT is working fine.Any
ideas on
ot the
> case - it is an electret type.
>
> I believe it was designed to be a microphone you could plug into a
> computer, and all of those are electret types.
>
> 73,
> Don W3FPR
>
>
> On 1/28/2019 2:26 PM, Paul Ecker wrote:
> > Does anyon
Does anyone know if the CM500 has a Electret or Dynamic mic?
73
Paul
w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Problem solved with the help of Dick, K6KR. I am ruining my KAT/KPA with a
Flex 6600 and the KAT was not receiving the correct band status
information. So KAT was following its config file and not switching to an
antenna I thought it should because KAT was on the wrong band. Also my KAT
Utility
Have two antennas enabled, for 6-20M in the KAT500 Utility
-Config-Antennas. Have two antennas connected to the KAT. Yet right now,
it won't allow me to switch off antenna #1. Anyone have any ideas on what
my problem might be
73
Paul
w2eck
The P3 has been Sold.
Tnx & 73
Paul
w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
P3 Panadapter #3393 for K3S, K3 and other rigs with P3SGVA - P3Video/FFT
Adapter installed, in excellent condition with latest firmware.Includes:
P3SVGA for large screen monitor.
P3TXMON- TX Monitor Power and Waveform Display Adapter for the P3;
DCHF-2000 1.8-54Mhz 2000w; Directional Coupler;
This K3 has been Sold.
73
Paul
w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Title of previous post should have said For Sale
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Loaded Elecraft K3 with 2nd Receiver in Excellent Condition
#6663
Both main and sub receiver upgraded with KSYN 3A Synthesizers.
KAT3 ATU, KXV3A IF RX Ant /Out & Transverter Interface,
KDVR3 Digital Voice Recorder,
Main receiver has Elecraft 2.7 Hz filter, 1.8 Hz, 400 Hz, 250 Hz 8 Pole
Joe & Bob - thank you very much, you nailed it. The K3 Monitor, when the K3 was
in a digital mode, was at 0. Now have it turned up to 6 and my problem is
solved in all the digital modes I listed. Tnx fer quick response.
73 Paul w2eck
Problem: Not hearing any audio during transmit in digital modes.I have a K3,
Win 10 PC, with microHam DKII interface. When transmitting inRTTY, PSK31 or
FT-8 I am not hearing any Tx audio, which I had been previously. I first
noticed this in RTTY when not hearingany diddles. But when using
Thanks to AI5II's suggestions got the Tx problem fixed. Changed the Rig to KX3
and PTT to CAT. So the Signalink Tigertronics guidance was not accurate, at
least for me. Also had Win4K3 running and it was using the KX3 comport. So
closed that program and now the KX3 is receiving and transmitting
I had to send my K3 infor repairs, so I will be using my KX-3 as my main radio
for the next fewweeks. But I haven’t got it working with Digital modes yet in
particular FT-8.
PC is a Win 10 and amusing a Signalink USB. I am able to receive fine in WSJT-X
but not transmit.
Settings in
Jim- thanks much for the quick reply. Very helpful
73Paulkc2nyu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
I have been working on bonding my station equipment and have come the issue of
bonding/RFI fixes to the VS-35M. I have read that it is suggested to scrape the
paint around the green wire from the ac round plug attachment point to the
case. But there is also a small black wire that bonds the V-
Alan - is there any documentation available on the procedure for calibrating
the Tx Monitor?
73Paul
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
A related question on this subject concerning the Tx Monitor. In terms of Power
& SWR readings, can the Transmit Monitor be calibrated ? Or have other users
found no need to adjust readings right out of the box? Reviewing the P3 manual
on pages 34-35 there isn't much said about this subject.
Ron - thanks very much
and also thanks to Mike Flowers K6MKF who replied off line.
73 Paulkc2nyu From: Ron D'Eau Claire <r...@cobi.biz>
To: 'paul ecker' <ecke...@yahoo.com>
Cc: 'Elecraft' <elecraft@mailman.qth.net>
Sent: Wednesday, October 5, 2016 1:36 PM
Subject: RE
In my K3 I have SPKR+PH set to YES, and sometime ago Iassigned a macro to PF2
that allows me to switch the speaker either on or off, even though Ihave
headphones plugged in. But I'll be darn if I can remember or figure outnow,
what the macro cmd would be so I can assign the same action to a
Save your self a lot of trouble and change over to Win4K3 Suite. It is
specifically designed for Elecraft products and the customer support leaves HRD
in its rearview mirror. Check out the website.
73Paulkc2nyu
Win4K3 Suite Software for the Elecraft K3 K3S and KX2
|
|
|
| ||
Don - thanks for the info, helpful.
73Paul
From: Don Wilhelm
To: KC2NYU ; elecraft@mailman.qth.net
Sent: Wednesday, July 13, 2016 11:18 AM
Subject: Re: [Elecraft] K3: K-pod uses
Paul,
If you are completely comfortable with mouse tuning
Joe- understand and thanks very much for the help.
Paul kc2nyu
>> You will need to make sure no other program is currently using theCAT Port.
>>Windows does not allow sharing of ports. Any program using
a port must close (release) the port before another program can open
(begin using it).
the K3. At Program start, the
PTT/CAT settings >>window comes up every time. If I choose PTT or CAT, it says
comport already in >>use. So I cancel the settings window and use Vox. It works
but not sure it is >>ideal. >>73 Paul>>kc2nyu
On 6/28/2016 5:20 PM, paul ecker vi
Joe- replies embedded at dashes in italics
What softwareare you using for FSQCALL? I see atleast three programs
that supportFSQ mode.
-- usingFSQCALL v0.36 by ZL2APF What are thePTT settings in your software? -
settings inPTT/Cat settings are com14 --00,kenwood(oldermodels) -- Use PTTIs
Wondering if anyone is group is having success running FSQCALL with their K3.
When I open the program, the K3 red Tx light immediately comes on and thus no
audio is received. It seems like there is an issue in the PTT/CAT
settings,(where I have selected the comport, radio type-00,older kenwood
Interesting thread and one that I have a question on. I have three antennas
coming in to the KAT3 and one jumper running from the KAT3 XMTR connector to my
K3 Ant1. When I installed the KRX3, I made the choice to have the main and sub
receiver share the antenna output of the KAT3. Since I had
In response to my question on the Win- Fldigi Reflector that I asked regarding
waterfall adjustments and the fact that I was seeing no signals on the Fldigi
Scope, Dave W1HKD responded,--- If you need those controls set to the maximum
range and lowest absolute signal (or close to it) then you
After reading received comments, I verified my settings, they are:In Fldigi-
Settings- Audio- Capture- Line(6-microHAM CODEC) ;
Playback - Headset Earphone (6-microHAM CODEC) In the K3 - config-
LIN OUT - nor 010; the microHAM DK II RX MAIN Pot is at
While copying the ARRL 20M CW broadcast I noticed that the decoding on the K3
is quite accurate as long as the signal does not fade. But while the K3 is
decoding very well, the data display of cw text on the bottom of the SVGA
display is no whereas close to the accuracy of the K3. Anyone else
Fred- I am not using the K3 Utility at all, just the P3.
73 Paul
From: "Cady, Fred" <fc...@montana.edu>
To: Ron D'Eau Claire <r...@cobi.biz>; 'paul ecker' <ecke...@yahoo.com>;
"elecraft@mailman.qth.net" <elecraft@mailman.qth.net>
Sent: Fr
A related question: What is difference between VFO IND and VFO LNK ?
I ask because I recently installed the 2nd receiver and had set VFO IND to
Yes. I then noticed that when trying to use the SCAN feature that when I press
M>V, only VFO A was being populated with the stored memory not VFO B.
Wayne - Tnx for explanation. Further question. VFO IND = YES allows VFO B to be
on a different band. This is most useful with the sub receiver.
So if I have VFO IND set to YES, does this preclude using the SCAN feature?
73 Paul
From: Wayne Burdick <n...@elecraft.com>
To: paul ecker
Don- I was able to measure the voltage between pin 1 pin 5 at the K3 ACC
plug. It measured 4.95v -- I then removed everything from the ACC plug and
plugged in the test DB15 plug with only wires on pin 1 5. Put the K3 in FSK-D
submode, and tapped XMIT, I got a steady tone. I then shorted pin
Ihave a K3 (entire K-Line). Win 7 PC 3.5ghz processor 16gb ram; MicroHam DKII
Interface. Withthis setup I am able to successfully do PSK31 using HRD-DM780,
WSJT-X andJT65HF, WSPR and run N1MM+ successfully in SSB and CW - both RX TX.
Myproblem is with MMTTY both running byitself or as the
Don - The Output of DK II is connected to the K3 ACC port using a DB15-EL-K3
cable supplied by microHam with the DK II.
73 Paulkc2nyu
--Paul,
Details on how you are connecting the DKII FSK output to the K3 please.
A quick perusal of the DKII information indicates
I tried running the Audio test described below with my K3 DVR and for some
reason my own audio is not being recorded. The DVR works fine recording and
playing audio off the air. But when I attempt to record my own audio as
described below, when I play it back to you can hear audio go to zero
Have a problem that just cropped up last night. When I turn on my K3, the red
TX light immediately goes on. After connecting and disconnecting all external
connections to K3, I determined the culprit was the RS-232 cable to the P3. If
I disconnect the cable problem goes away, red TX light goes
I changed K3 PTT-Key to OFF-OFF, that seems to have solved TX on turn on
problem. But now - not sure if related- K3 will not talk to PC serial port. I
have two 2 port serial cards installed my Win 7 64 bit PC. I tried cable from
K3 in all four and can't get it to connect. Also cannot get KPA
Thanks for all the inputs on my question.I have made some progress. I changed
the K3 mode from AFSK to Data A, and in MMTTY haveRev selected. I am now upon
TX getting power out, movement on the ALC meter (4 bars with 5th flickering,
mic line set at 31) and hearing Diddles. So MMTTY is working
A I get some power out , why the lower power then what I have
the K3 set out ??
73 Paulkc2nyu
From: Don Wilhelm w3...@embarqmail.com
To: paul ecker ecke...@yahoo.com; elecraft@mailman.qth.net
elecraft@mailman.qth.net
Sent: Tuesday, October 14, 2014 5:39 PM
Subject: Re: [Elecraft] K3
I have Net on and AFC off in MMTTY. I continue to go through MMTTY help file
and K3 manual but have yet to find a solution. Still would like to find another
K3 owner who is using a Signalink as an interface with MMTTY. That would be
quite helpful. a
I am having problems getting MMTTY to transmitproperly using K3 with a
Signalink USB interface.
Currently, when I go to TX in MMTTY, I get red TXlight on Signalink, a red TX
light on K3, I hear diddles coming out of theSignalink rear monitor jack, and
I seemovement on Vu meter in Windows
I tried that but it still does not get the VFO B freq from memory to actual VFO
B
73 Paul
I've noticed this when B is not on same band as A. Try A-B and recall your
memory again
--
Pierfrancesco Caci
*
* Today at 2:27 AM
To
* paul ecker
* paul ecker
I cannot get the K3 scanning function
to work properly. I am following the instructions in the K3 manual pg 40
as well as the Fred Cady book pg. 46. I have used both the Elecraft K3 Memory
Editor
and entered the memories manually, to save the frequencies into the K3
memories. When I press MV,
Does RUMlog work with Windows ?
Tnx
Paul
kc2nyu
Message: 20
Date: Sat, 29 Jun 2013 13:27:28 -0700
From: Jeff Ellis driftenli...@gmail.com
To: bill.va...@gmail.com
Cc: elecraft list elecraft@mailman.qth.net
Subject: Re: [Elecraft] looking for iPad software
Message-ID:
OK, thanks Fred for feedback.
73 Paul
kc2nyu
From: Fred Smith m...@totalhighspeed.com
To: 'paul ecker' ecke...@yahoo.com; Elecraft@mailman.qth.net
Sent: Sunday, June 30, 2013 8:51 AM
Subject: RE: [Elecraft] looking for iPad software
No it does
Tnx for all the responses. I may have poorly stated my question. What I was
trying to say is the waterfall traces seem dim both on P3 and on the monitor I
am using (dedicated to P3 SVGA). Even though signals seem relatively strong in
spectrum display, they are not bright and are monochromatic
Alan- thanks tried both your recommendations and did help. On Waterfall Clr- I
have default colors selected.
Tnx
Paul
kc2nyu
From: Alan Bloom n...@sonic.net
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] SVGA brightness (K3)
Message-ID: 519a4816.3060...@sonic.net
Content-Type:
Just installed the SVGA card in my P3. But I can't figure out how to adjust the
brightness of the waterfall trace. I am guessing it is an adjustment in the P3
menu, because the waterfall on both the P3 and SVGA monitor are rather dim. I
have not been able to locate any how to in the P3 Manual
The discussion the past few days on Beacons prompted me to try the Faros
-automatic Beacon Monitoring Program by Alex VE3NEA. For it to run you need to
have Omni-Rig installed. Here's my problem when I configure Omni Rig to use the
same com port as the K3, as the Faros instructions instruct you
to work. 73, phil, K7PEH
From: Phil Hystad phys...@mac.com
To: Jim - KE8G k...@cox.net
Cc: 'paul ecker' ecke...@yahoo.com; elecraft@mailman.qth.net
Sent: Tuesday, March 12, 2013 9:15 PM
Subject: Re: [Elecraft] Trouble with Auto-Spot (K3)
I had the same problem
Have recently noticed that the Auto-Spot feature on my K3 is not working as
well as it used to. With CWT on, if I manually tune the signal, to get a
blinking bar to show in the CW/Data Tuning Aid area of the S-Meter area, and
then Tap SPOT, it drives the signal off the tuning bar, whereas it
Thanks for all the inputs on my question concerning the P3/P3SVGA combo vs
other alternatives. I learned a lot. After reading them all, I have decided to
go with P3SVGA option vs. the LP-Pan option. Appreciate the help.
73 Paul
kc2nyu
First, I looked in the archives and didn't really find an answer. I have a K3
and P3 and love the combination, but seeing a P3 with a P3SVGA card in action
at Orlando Hamcation, I have been considering adding the P3SVGA card to my P3.
But have read some articles about the LP-Pan and I am
Dennis- great summary. I wish I had seen earlier. My trouble with WSPR not
changing freqs was due to have an incorrect Handshake setting ( hardware vs.
none). My K3/Signalink USB/ all digital programs are now functioning in all
aspects.
73 Paul
kc2nyu
Message: 7
Date: Wed, 16 Jan 2013
WSPR seems to work fine for me except when I try to change the Band, I get the
following error string:
**
WSPR Version 2.11_r2263, by K1JT
Run date: Thu Jan 10 16:25:16 2013 UTC
Config parameter error: Invalid parameter
Error
I think that is a great idea. My current power supply been around a while and
is Noisy.
73 Paul
kc2nyu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hope I am not expending my quota of dumb questions but hey I am new. Got my Tx
foot switch plugged into the back panel PTT jack and it works fine. My next
project is to get my SignaLink USB up and running with the K3. I know I can do
lots without it but I would like to not use the PC sound
Thanks to all who educated me on this one. I now have it working just fine
(with firmware ver 4.51). AGC threshold at 6 and CW decode threshold at 5.
Then as was suggested riding the RF gain to till it starts decoding. AND
thanks to another post, I have discovered using the Terminal
=ISO-8859-1; format=flowed
The Pro-set Plus connects directly to the rear inputs. You don't use an
adapter; you just
plug the two small phone plugs directly into the appropriate back-panel jacks.
On 8/13/2012 11:50 AM, paul ecker wrote:
I am somewhat new to list and definitely a new K3 owner
Sorry I know this just came up but here goes again. New K3 rig operator and I
can't get CW Decode to work. I have text decode set to CW 5-40 and THR set to
Auto. I am in CW mode and have the T showing under and to the right of CW. I am
using auto spot to get the signal zero beat. Getting nice
I am somewhat new to list and definitely a new K3 owner just having completed
the build of #6663. I understand this may be turning over dirt that has been
worked many times before - but didn't really find what I was looking for in
archives.
- I understand that if I want to use my exisiting
90 matches
Mail list logo