Andy,
I did not see any response on the reflector, so I will try.
First of all, you need a soundcard. If you have installed the KIO3B in
that K3, there is an internal soundcard in the K3 that can e used.
If the KIO3 has not been upgraded, you will need a soundcard external to
the K3. Either
I've really been enjoying my new used K3. I installed the KPA3A in it and have
been very active on the CW bands.
My question is this. I can't get psk 31 to work in my HRD...either in
conjunction with Win4k3 or by itself. It works fine with Win4K3 by itself but I
want the nice HRD waterfall disp
Thanks for everyone's assistance. I had a multiple of issues, all due to
adjustments, etc.
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:El
Mike,
In answer to your question, you can tell whether there is modulation or
not by using the K3's Monitor function (the MON level must of course be
above zero for this to work).
As for the answer to the question you didn't ask, one possible explanation
for the lack of modulation is that your in
I am trying to set up my computer, etc to use HRD, DM780, and my K3.
I can tune around and receive and decode psk and rtty just fine with DM780,
but when I go to send, it goes in to transmit but has no power out.
My first guess is there is no modulation, but how can I verify?
Mike
AI4NS
___
Is there a French station using K3 in PSK mode please.
Thanks.
F8EZE Jean
Greetings de F8EZE Jean
CDXC 1307
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
P
Lyle Johnson wrote:
>
> If you really must do this, you should probably set CONFIG:TX ALC OFF
> once you've adjusted your power level using the PWR control. Otherwise
> the ALC system will see the Tx output not being what was requested and
> will increase the gain, leading to power creep and
> I'm unhappy with the advice to set the level to 4 or 5 bars on the ALC scale
> because when I do this my K3 puts out twice the power set on the POWER
> control making it far too easy to overdrive the PA. I prefer to adjust the
> input level until the output power matches what it says on the power
Don, Lyle, Greg,
You guys are fabulous!
Thank you. I would really like to make sure I have things tied down for Feb.
73's
Rob
KE7VHF
Robert Hall
www.RobertHall.com
On Thu, Jan 29, 2009 at 10:42 AM, Don Wilhelm wrote:
> Robert,
>
> I don't know of any step-by-step instructions, the whole
Robert Hall - KE7VHF wrote:
>
> Is there somewhere where I might find a more exhaustive step by step
> discussion of seting up sound levels on the pc while connected to the K3.
> I
> may be a little dense and have not felt entirely comfortable with what I
> have read in the manual. Maybe this d
Robert,
I don't know of any step-by-step instructions, the whole picture is
complicated because of the variety of computer soundcards that could be
used. As far as the K3 is concerned, the procedure is simple - adjust
the line-in gain setting, much as you would with the mic gain.
Yes, the lev
> Is there somewhere where I might find a more exhaustive step by step
> discussion of seting up sound levels on the pc while connected to the
> K3...
Not that I am aware of.
Best to learn by doing. Put the radio in TX TEST mode and play with the
LINE IN GAIN and the PC soundcard program. Do
Is there somewhere where I might find a more exhaustive step by step
discussion of seting up sound levels on the pc while connected to the K3. I
may be a little dense and have not felt entirely comfortable with what I
have read in the manual. Maybe this discussion might include config menu
items an
Ron,
I would suggest that you reduce the soundcard output level and increase
the K3 line in setting for smoother control of the audio level. I run
my K3 line in at 12 to 13 and adjust the soundcard level to achieve the
proper number of ALC bars (4) - my soundcard controls are at the
mid-point
> Setting up my K3 for PSK31. Using PC with on board sound. (Intel
> Integrated Audio). Stereo cable from K3 to sound card. I am looking to
> adjust ALC for 4 bars using the line in adjustment. I find that a level
> change of one unit on K3 (i.e. 5 to 6) changes ALC from zero bars
> showing t
Setting up my K3 for PSK31. Using PC with on board sound. (Intel
Integrated Audio). Stereo cable from K3 to sound card. I am looking to
adjust ALC for 4 bars using the line in adjustment. I find that a level
change of one unit on K3 (i.e. 5 to 6) changes ALC from zero bars
showing to 5 bars s
.
Thanks
Al
AD9P
/---Original Message---/
/*From:*/ Alan D. Wilcox <mailto:[EMAIL PROTECTED]>
/*Date:*/ 2/16/2008 4:19:46 PM
/*To:*/ elecraft <mailto:elecraft@mailman.qth.net>
/*Subject:*/ Re: [Elecraft] K3, and PSK
Al,
I just posted "K3 configuration for PSK31 - How
Al,
I just posted "K3 configuration for PSK31 - How To" a moment ago.
Perhaps it'll help you out.
Alan
Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701
AD9P wrote:
Is there a way to mute the speaker while operating PSK ?
So far I have not been able to
Actually if its during TX, he should turn down MON.
Greg
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of David Ferrington,
M0XDF
Sent: Friday, February 15, 2008 5:06 PM
To: AD9P; Crafters
Subject: Re: [Elecraft] K3, and PSK
Turn the AF or Monitor down
Turn the AF or Monitor down?
On 16/2/08 00:13, "AD9P" <[EMAIL PROTECTED]> sent:
>
> Is there a way to mute the speaker while operating PSK ?
> So far I have not been able to get PSK figured out just yet on the K3.
> Serial number 400 went together great, and operates very well on CW, es SSB.
>
Is there a way to mute the speaker while operating PSK ?
So far I have not been able to get PSK figured out just yet on the K3.
Serial number 400 went together great, and operates very well on CW, es SSB.
But the Digital Modes (PSK) is still cloudy .
Thanks
Al
AD9P
--
View this message in contex
21 matches
Mail list logo
