Thanks for all the helpful tips and information. Through more
testing, it appears it's not DM-780 problem at all, but more likely a
bug in the VMWare USB stack. I can get PC sounds to play through the
device, but as soon as I change anything at all, the sounds stop
working and nothing I can do ex
I'm not familiar with VMWare, but under Parallels, youhave to make sure that
the various devices, e.g., theserial lines and/or audio codecs, that you need
for HRDhave been assigned to Parallels (and Windows) so thatWindows can legally
access them. It sounds like you've gotthat much at least part
I have the Tascam US122mkII running on MacOS 10.7.5 on a MacBook
Pro. I'm running it on MacOS rather than Windows. It works, but
I occasionally have to reboot the Mac to get the driver to
properly connect with the Tascam. When it's not working, it
looks like everything is connected properly, bu
I'm trying to get my new K3 on the digital modes using HRD. On the
advice from the good folks on this list, I purchased a Tascam US122 MK
II. No regrets there, it's a great unit for the price.
My setup has HRD running under VMWare on a Macbook Pro/Yosemite. I'm
running latest Windows 8.1 with H
Bands pretty lousy today, but heard a weak YR10RRO on 17M. Noise level
about an S5 to 7. I was using DM780 and the WinKeyer option for sending
as my fist is not good due to arthritis. When I looked up at the decode
screen on DM780 it was doing a very good job. So I began to play with
the se
There's a new version out, 6.1.2. I have it running with my KX3. Try it
and see if you still have a problem
73,
Barry
K3NDM
On 9/3/2013 8:09 PM, Bill wrote:
I don't think these issues are a priority to the HRD folks. They have
been well known and documented for a very long time and were among
Not singling you out Bill, but isn't a more appropriate place for HRD's
shortcomings and lack of support on the HRD mailing list?
I'm to the point of creating a HRD filter in my e-mail client.
On 9/3/2013 7:09 PM, Bill wrote:
I don't think these issues are a priority to the HRD folks. They ha
I don't think these issues are a priority to the HRD folks. They have
been well known and documented for a very long time and were among the
bugs coming from the 5.xx versions.
For that reason alone, I have stayed with a 5.xx version.
Bill W2BLC
...@mailman.qth.net] On Behalf Of Doug Basberg
Sent: Tuesday, September 03, 2013 2:03 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 and HRD 6.0.3.135
I tried noise reduction/auto notch/manual notch buttons and they do not
change color to show engagement. I used the schemes available and they all
had
I tried noise reduction/auto notch/manual notch buttons and they do not
change color to show engagement. I used the schemes available and they all
had the same problem.
I can see whether they are engaged on the K3 screen, so not such a big
problem. But problem is there.
73 Doug N8VY
___
Hi Rick,
The TUNE button properly sets the KAT3 tuner tuning operation. I had to
make a new CAT command to change it to an actual TUNE (send a carrier) to
tickle the KAT500 into knowing what band portion I was on or for retuning.
Um, SWH16? I'd have to look again.
Unless I've totally missed som
h.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick Ruhl
Sent: Wednesday, January 09, 2013 3:43 PM
To: 'Mike Flowers'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and HRD
Hmm that's news to me ;)
-Original Message-
From: elecraft-boun...@mailman.qth.net
[
Hmm that's news to me ;)
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Flowers
Sent: Monday, December 24, 2012 3:38 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and HRD
I've logged a few bug
, Maui
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KD8NNU
Sent: Monday, December 24, 2012 12:23 PM
To: david Moes; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and HRD
What version of HRD are you using. Pre 6.0 has
-.- -.. ---.. -. -. ..-
-Original Message-
From: david Moes
Sent: Sunday, December 23, 2012 8:05 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and HRD
Similar function with logger32 works fine on the K3.The mode will
change according to mode definitions in the "bands and modes" tabl
Similar function with logger32 works fine on the K3.The mode will
change according to mode definitions in the "bands and modes" table and
sets mode when I click on a spot. HRD uses a similar setup. Is there
possibly an error in the HRD "band layout" definitions as set in the
band manager
Hard for me to imagine how K3 firmware could cause this. Do you have
another program with this capability you could try? You could also try
sending "FA" (VFO A) commands directly to the K3 using the Command
Tester screen in K3 Utility. See the Programmer's Reference for details.
73,
Wayne
N
Disregard my last posting. I forgot to explain what is happening. Here is
what my message should have said:
I have a really odd bug going on and I don't know if it is the K3 or Ham
Radio Deluxe. Whenever I click on a spot, everything works fine except when
it happens to be any frequency in th
I have a really odd bug going on and I don't know if it is the K3 or Ham
Radio Deluxe. Whenever I click on a spot, everything works fine except when
it happens to be any frequency in the 30s - that is 3.530 to 3.539, 3.630 to
3.639, etc. Anyone know if that's an issue in the K3 or in HRD? I susp
18 PM
Subject: [Elecraft] K3 and HRD V6.0 beta
Has anyone gotten a copy yet? Comments? It is out there now.
The new HRD could be very interesting for K3 use - the older versions lack many
features and do not indicate selections correctly.
Looking to hear good news.
Bill
Has anyone gotten a copy yet? Comments? It is out there now.
The new HRD could be very interesting for K3 use - the older versions
lack many features and do not indicate selections correctly.
Looking to hear good news.
Bill W2BLC
__
Steve,
What COM port/baud rate is HRD using? They must match.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team
On Wed, Apr 25, 2012 at 7:49 AM, Steve wrote:
> Hi Guys.( Not gender specific) I just
> installed HRD v 5.11 on my comp
Hi Guys.( Not gender specific) I just
installed HRD v 5.11 on my computer and connected
to the K3 with the KUSB cable into the RS-232 port
on the radio.
In the set up I have the Elecraft K3 on com port 3
at 38,400 Baud rateHow ever HRD tries,
but cannot read the frequency on the radio.
Hi you all !
I these days due to the AGC boring problem we are suffering, due to the HRD
recent history that says it's not clear when we'll have a new HRD "bugs
free" release and as I own a Mac I'm testing Cocoamodem/MacLoggerDx and I
may say the AGC problem disappeared.
So I would thank you a lo
The latest field-test edition of K3 firmware includes better
protection from the communications problem that causes HRD to turn off
AGC periodically. I'll be happy to send it to anyone who is
experiencing the problem.
73,
Wayne
N6KR
On Nov 3, 2011, at 9:43 AM, Courtney Krehbiel KD6X wrote:
I also have been having problems where the AGC suddenly shuts off while using
HRD V.5 with the K3/P3 combination. It's not caused by RF because often
this happens when I'm not even in the shack. I did find what seems to be a
solution for me, so I thought I'd post back and hopefully help others
si
This is a known issue reported before on this list. Search the
archives for some fellow sufferers. 73, Guy.
On Tue, May 10, 2011 at 9:56 AM, ab2tc wrote:
> Has anybody experienced this with LP-Bridge inserted between the K3 and HRD?
> That should slow down the polling of the K3 as LP-Bridge wi
Has anybody experienced this with LP-Bridge inserted between the K3 and HRD?
That should slow down the polling of the K3 as LP-Bridge will do the polling
at its own pace and respond to HRD with data from its own database. I have
never experienced any problems with AGC turning off but I am also usin
I have just downloaded DXLab. I don't think I shall be bothering with HRD
anymore! In answer to Guy's question, I seem to recall that a serial port
emulator I have used in the past had a buffer for HRD, but I'm a bit hazy
on the detail.
Thanks gents, for all the input. I'm going to take a goo
Joe,
I too use DX Labs suite and the issue has never returned.
73's
Gary
On 8 May 2011 04:00, Guy Olinger K2AV wrote:
> Can the HRD polling be slowed down a bit?
>
> On Sat, May 7, 2011 at 11:38 AM, Joe Subich, W4TV
> wrote:
> >
> >> Trouble is the new features in HRD logbook, such as LOTW do
Can the HRD polling be slowed down a bit?
On Sat, May 7, 2011 at 11:38 AM, Joe Subich, W4TV wrote:
>
>> Trouble is the new features in HRD logbook, such as LOTW download
>> etc, tend to keep bringing me back to HRD!
>
> Try DXLab Suite ... its logbook (DXKeeper) has it all over HRD and
> the rig
> Trouble is the new features in HRD logbook, such as LOTW download
> etc, tend to keep bringing me back to HRD!
Try DXLab Suite ... its logbook (DXKeeper) has it all over HRD and
the rig control module (CI-V Commander) does not "abuse" the K3 CAT
interface.
No matter how one configures HRD, it
It happens exactly the same to me, totally unpredictable and not relevant to a
sequence of cat command I may send via HRD ! It's really funny and frustrating
:-( I'm using HRD into a virtualized XP Pro machine at a Mac Mini , using a
232-Usb adapter.
In the past I had similar strange behaviour
Thanks Jim
Well I was pretty sure it was RF related until it happened twice on
receive today when I hadn't been transmitting for quite some time!
Perhaps I'll go back to MacLogger DX. Trouble is the new features in HRD
logbook, such as LOTW download etc, tend to keep bringing me back to HRD!
73
Absolutely. I had this problem as well with HRD. I was never able to resolve
the issue. Since moving away from HRD to al Mac based software I have not seen
the problem again. I, for one, do not think it is an elecraft problem either,
although it is hard to imagine why HRD would do this when re
Hi Stephen:
YES, the same thing happens to me several times a week.. I have the same
setup as you referenced to K3-HRD and I'm also using the HRD logbook and
DX Cluster..
de W4CCS
On 5/7/2011 10:14 AM, Stephen Prior wrote:
> I have (and I think I reported some time ago) been experiencing occa
I have (and I think I reported some time ago) been experiencing occasional
AGC misbehaviour where the AGC would suddenly turn off. Insofar as I can
remember this has only happened on ssb and up until now I had formed the
impression that I may have rf getting in somewhere as it only seemed to be
ap
January 08, 2010 6:01 PM
Subject: Re: [Elecraft] K3 and HRD
> Jim,
>
> Your description sounds very much like what would be expected to happen
> if the software thought the radio was in upper sideband but the radio
> was actually in lower sideband.
>
> You didn't men
Jim,
Your description sounds very much like what would be expected to happen
if the software thought the radio was in upper sideband but the radio
was actually in lower sideband.
You didn't mention which of the K3's four data sub-modes you were using.
Two of them are USB and two are LSB. If yo
Either I have something set wrong in my K3 or in HRD and I do not know IF that
is true or which one is set wrong.
Waterfall with the actual frequency being displayed on the ruler bar above the
waterfall:
Radio set to 7.035, data mode, PSK signal showing at 7.037, tune radio to
7.036, frequency
Thank you Iain and Dick. The serial connection from my laptop to the K3
is now working properly. I tried changing COM ports and port settings without
success. Then I shut down the computer, unplugged the two USB devices,
restarted the computer, reattached the USB to serial cable and all
a wide range of COM
port numbers.
Dick, K6KR
*From:* [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] *On Behalf Of *Lawrence Libsch
*Sent:* Thursday, October 09, 2008 6:21 PM
*To:* Elecraft@mailman.qth.net
*Subject:* [Elecraft] K3 and HRD - can't connect
I am attempti
Sent: Thursday, October 09, 2008 6:21 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 and HRD - can't connect
I am attempting to connect to my K3 with HRD. I am using the Elecraft
USB to serial port to connect them. The USB to serial port connector is on
COM 9, has the latest
I should add that I am using WIN XP SP2, not Vista.
Larry___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Ad
I am attempting to connect to my K3 with HRD. I am using the Elecraft USB
to serial port to connect them. The USB to serial port connector is on COM 9,
has the latest drivers and has been successfully used to install K3 firmware v
4.26. HRD will not let me choose COM 9. COM 3, which HRD want
can be set from the K3's CONFIG:RS232 menu, or by
entering a "br" command from the K3 Utility. Details are in K3 Utility Help
under the Troubleshooting topic "Loading Firmware Changes the RS-232 Speed".
73 de Dick, K6KR
-Original Message-
From: [EMAIL PROTECTED]
[
That was the problem, the K3 load software was running.
I also set to 38,400.
Thanks Simon
--
Another program has the COM port open already.
Simon Brown, HB9DRV
___
Elecraft mailing list
Post to: Elecraft@ma
I suggest to change the K3 and HRD to 38400 - it'll fly...
Simon Brown, HB9DRV
--
From: "Bruce McLaughlin" <[EMAIL PROTECTED]>
Be sure to set the K3 data rate to 4800 baud. That did it for me.
___
El
Another program has the COM port open already.
Simon Brown, HB9DRV
--
From: "Joe Word" <[EMAIL PROTECTED]>
I am trying to use Ham Radio Deluxe to control my K3, I get the
message "Acces is Denied". I am on the correct port and etc, I use the
same
Be sure to set the K3 data rate to 4800 baud. That did it for me.
Bruce-W8FU
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joe Word
Sent: Friday, July 04, 2008 2:44 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 and HRD
I am trying to use Ham
Joe,
Compare the RS232 speed you have set in the K3 CONFIG menu with the
speed that HRD is trying to use.
Mine connects fine at 38400.
The K3 Utility sets the K3 baud rate automatically, so the updates may
work fine, but other applications may not.
73,
Don W3FPR
Joe Word wrote:
I am tryi
I am trying to use Ham Radio Deluxe to control my K3, I get the
message "Acces is Denied". I am on the correct port and etc, I use the
same cable to update the K3. Is there any setup in the K3 needed?
73,
Joe N9VX
___
Elecraft mailing list
Post to: El
Go to the Beta downloads!
Simon Brown, HB9DRV
--
From: "Malcolm Rothwell" <[EMAIL PROTECTED]>
Downloaded HRD (again) and note that there is no support for the K3, the
only Elecraft radio is the K2. Has this been withdrawn? Seem to remember
my la
Hi Malcom,
The K3 is supported in the beta version (3.5). The beta version is
available on the download page.
73
Tony Fegan VE3QF
K3 #137
Malcolm Rothwell wrote:
Downloaded HRD (again) and note that there is no support for the K3,
the only Elecraft radio is the K2. Has this been
Downloaded HRD (again) and note that there is no support for the K3, the
only Elecraft radio is the K2. Has this been withdrawn? Seem to remember
my last play with HRD that the K3 was an radio option?
Mal G4KFT K3 #263
___
Elecraft mailing list
Post t
55 matches
Mail list logo
