I'm a brand new K3 user. Had it since yesterday and already love it.
I want to use the radio in split with both receivers linked all the
time. Unfortunately with N1MM if I click on a simplex spot both split
and sub receiver are turned off. Anyone know how I can defeat this so
radio stays
Bob, you're touching on a couple of areas where N1MM Logger's control of the
K3 isn't rock solid.
The best you can probably do for now is to check the config setting dual rx
always on. With that setting, the subrx should stay on when a spot is
grabbed. Personally, I'd like the software to
In N1MM on entry window, click config in menu bar. About half way down,
click on Dual RX always on.
On Tue, Jan 5, 2010 at 10:06 AM, bob finger fin...@goeaston.net wrote:
I'm a brand new K3 user. Had it since yesterday and already love it.
I want to use the radio in split with both receivers
,
... Joe, W4TV
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry N1EU
Sent: Tuesday, January 05, 2010 10:46 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] k3 and N1MM question
Bob, you're touching
Perhaps related to 4 -- clicking on a spot in VFO-A bandmap turns off the
sub-receiver if it's on.
--- On Tue, 1/5/10, Joe Subich, W4TV li...@subich.com wrote:
From: Joe Subich, W4TV li...@subich.com
Subject: Re: [Elecraft] k3 and N1MM question
To: 'Barry N1EU' barry.n...@gmail.com, elecraft
OOps, missed this one. Sorry.
--- On Tue, 1/5/10, Guy Olinger K2AV olin...@bellsouth.net wrote:
From: Guy Olinger K2AV olin...@bellsouth.net
Subject: Re: [Elecraft] k3 and N1MM question
To: bob finger fin...@goeaston.net
Cc: elecraft@mailman.qth.net
Date: Tuesday, January 5, 2010, 8:26 AM
On Tue, 5 Jan 2010 11:32:45 -0500, Joe Subich, W4TV wrote:
There are several other issues with N1MM Logger and the K3.
Yes. While I like the N1MM logger, use it, and recommend it to
others, it has it's problems, and those who write the software
don't like to be told about them. I learned that
2) You're running and start to respond to a station who calls you
but hear him repeat his call, so you stop sending (ESC). You're
using their Enter Sends Message mode, so ENTER should send
your exchange. But because you hit escape, it now asks the other
station for a fill rather than sending your
2) You're running and start to respond to a station who calls you
but hear him repeat his call, so you stop sending (ESC). You're
using their Enter Sends Message mode, so ENTER should send
your exchange. But because you hit escape, it now asks the other
station for a fill rather than sending
I enjoyed last weekend operating SSCW with my new K3/10 and N1MM. Both
were a joy to use!! I have one curiosity however. I have the K3 setup
for semi-QSK with a delay of 0.03 which works fine for me at about 25
wpm. However, the keying through N1MM operates as though PTT is enabled
at the
I was running QSK with N1MM. I usually set the delay to 0. With
delay set to zero, I cannot tell a big differnce with QSK on or off
(on the K3) when using N1MM to key the rig.
David Wilburn
NM4M
http://www.nm4m.com
Randy Moore wrote:
I enjoyed last weekend operating SSCW with my new
Even if I go to QSK and/or set the delay to 0, I still hear the same
behavior - like the PTT is enabled throughout the transmission and no
signals are heard through the receiver. When sending with my paddles, I
hear normal QSK behavior. I must have some configuration parameter set
wrong in
Randy:
In N1MM, go to the configurator, hardware tab, and click on the Set
button for your K3. Make sure that the Radio PTT via command is NOT
checked.
73, Ken K3IU
~~~
Randy Moore wrote:
I enjoyed last weekend operating SSCW with my new K3/10 and N1MM.
Both were a joy
Sent: Friday, November 07, 2008 9:13 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 with N1MM question
I enjoyed last weekend operating SSCW with my new K3/10 and
N1MM. Both
were a joy to use!! I have one curiosity however. I have
the K3 setup
for semi-QSK with a delay
Randy, KS4L, wrote:
However, the keying through N1MM operates as though PTT is enabled
at the beginning of a transmission and disabled at the end. In other
words, I hear no signals during the N1MM transmission. I'm keying
through the RS232 port on the K3 from a standard serial port on my
Thanks, Ken, and others. That was it!
73,
Randy, KS4L
Ken K3IU wrote:
Randy:
In N1MM, go to the configurator, hardware tab, and click on the Set
button for your K3. Make sure that the Radio PTT via command is NOT
checked.
73, Ken K3IU
___
16 matches
Mail list logo
