Re: [Elecraft] P3 cursor tunes off screen

2016-11-19 Thread Fred Jensen
I am always amazed at how different we are as individuals. I have several CW friends who think half-span is better than canned beer. For me, I just get really confused by it. I'm an Iambic-A ham, others swear that B is the only way. Actually, I never got Iambicized and I now use a single

Re: [Elecraft] P3 cursor tunes off screen

2016-11-19 Thread Matt Zilmer
Setting full span or half span works best for most. Fred nailed this one. 73, matt W6NIA On 11/19/2016 3:38 PM, Fred Jensen wrote: I'm not quite certain what Tim means by "tunes off-screen," but taken literally, it's not how mine works. My parameters on 80 CW currently are: FIXED-TUNE

Re: [Elecraft] P3 cursor tunes off screen

2016-11-19 Thread Fred Jensen
I'm not quite certain what Tim means by "tunes off-screen," but taken literally, it's not how mine works. My parameters on 80 CW currently are: FIXED-TUNE on FIXED MODE AUTO ADJUST=Full Span SPAN=20 KHz When I tune VFO A up in frequency, its cursor moves to the right and when it gets to the

Re: [Elecraft] P3 cursor tunes off screen

2016-11-19 Thread Don Wilhelm
Tim, That is what Fixed Mode is all about - the center frequency stays put and the cursor follows the VFO. If you have the SPAN set to a value more narrow than your QSY excursion, the cursor will go off-screen. If you instead go to tracking mode, the cursor stays fixed in the center and

[Elecraft] P3 cursor tunes off screen

2016-11-19 Thread Tim Gennett
I have the FixMode menu function in my P3 set to Full. Yet, when in fixed tune mode, the cursor tunes off screen and the center frequency does not update. Is there another setting that affects this function? Tim K9WX __ Elecraft

Re: [Elecraft] P3 - utility, a question

2016-11-07 Thread Gerald Manthey
I sure wish it would display text like the PX3 does. > On Nov 7, 2016, at 10:41 AM, n6hz wrote: > > Hi Andy, > > I know it can get confusing with all the different macros. The K3 can be > programmed with macros, the P3/SVGA can have keyboard macros saved using a >

Re: [Elecraft] P3 - utility, a question

2016-11-07 Thread n6hz
Hi Andy, I know it can get confusing with all the different macros. The K3 can be programmed with macros, the P3/SVGA can have keyboard macros saved using a keyboard and each of the Utilities allows macros to be created and used with a mouse click. The P3/SVGA accessory board allows up to 50

[Elecraft] P3 - utility, a question

2016-11-06 Thread ANDY NEHAN
I have the latest version of the P3 utility as downloaded from the Elecraft website viz 1.16.3.15. I note that it enables the creation of only 16 macros (the P3 can store 50 macros), and furthermore those macros don't seem to be saved to the P3 itself (but clearly it is a useful way to test

Re: [Elecraft] P3 Strangeness

2016-11-04 Thread n6hz
Hi Ken, Have you checked the voltage at the P3 12V input? On some earlier K3's (sorry I don't have the exact date), the 12V RCA jack on the back of the K3 lacked sufficient current to properly drive a P3 with the SVGA add-in board. A good test would be to see how the P3 acts when powered

Re: [Elecraft] P3 Strangeness

2016-11-03 Thread Ken Widelitz
Hi Mike, After cycling the power 10 times or so, just as I was going to try the P3 utility to reload the firmware per your suggestion, the P3 started working again. If the problem comes back, I'll try reloading the firmware. 73, Ken, K6LA / VY2TT

[Elecraft] P3 Strangeness

2016-11-03 Thread Ken Widelitz
My P3, which is turned on when the K3 is turned on isn't working properly. When turned on, it goes to a red screen, then cycles to a blue sceen, a black screen and a checkerboard screen. The SVGA screen works properly. Some of the P3 buttons work, some don't. Any suggestions? 73, Ken, K6LA

Re: [Elecraft] P3 wonky on 30 meters

2016-10-31 Thread n6hz
Hi Bob, The first thing I would try is to perform a parameter reset on the P3. Note that this will erase any settings such as FN keys etc that you have programmed, so you may want to save the configuration with P3 Utility or write them down. To perform the parameter reset, turn off the P3 and

[Elecraft] P3 wonky on 30 meters

2016-10-28 Thread Bob Novas
On 30 meters, and only on 30 meters, the P3 display does not agree with the signals that the K3S receives. It's wrong by about 20 or 30 KHz. In other words, where the P3 says there's signal, I hear nothing, but if I tune up about 20-30KHz, I hear a signal that I think is what's on the P3. Any

Re: [Elecraft] P3 utility and no sub receiver

2016-10-25 Thread Don Wilhelm
Ron, You have to use the P3 Utility to access the P3 - you cannot use the K3 Utility and the P3 Utility at the same time, they both have to use the same COM Port. For the NO SUB response, I suspect that you have not yet turned the KRX3 menu entry to Installed. 73, Don W3FPR On 10/25/2016

Re: [Elecraft] P3 utility and no sub receiver

2016-10-25 Thread Cady, Fred
t; on behalf of Ron Wilcox <rgloga...@gmail.com> Sent: Tuesday, October 25, 2016 12:35 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] P3 utility and no sub receiver First time poster. I just finished putting together my K3S, subreceiver, 100 watt amplifier and panadapter. Having a

[Elecraft] P3 utility and no sub receiver

2016-10-25 Thread Ron Wilcox
First time poster. I just finished putting together my K3S, subreceiver, 100 watt amplifier and panadapter. Having a medical background this was quite a unique experience. I have a couple of questions and could not find the answer in the archives so hope this is not a frequently asked question. I

Re: [Elecraft] P3 with KPod

2016-09-03 Thread Gary Smith
I would much rather have the K-Pod control the P3 and use remaining buttons to handle specific functions on the K3s. That is how it would be most useful to me. If I had a PigKnob as well, I'd have the Begali, the mouse, the K-Pod and the pigknob all on the right side of my keyboard. How over

Re: [Elecraft] P3 with KPod

2016-09-02 Thread Randy Farmer
You betcha! I've already asked and I'm hoping it happens sooner rather than later. 73... Randy, W8FN On 9/2/2016 10:20 AM, Joe Stone (KF5WBO) wrote: The PigKnob is already capable of controlling the PX3 markers. You simply need to ask Elecraft to port the #MAA and #MBA remote-control

Re: [Elecraft] P3 with KPod

2016-09-02 Thread Joe Stone (KF5WBO)
The PigKnob is already capable of controlling the PX3 markers. You simply need to ask Elecraft to port the #MAA and #MBA remote-control commands to the P3. Joe KF5WBO -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-with-KPod-tp7622090p7622094.html Sent from the

Re: [Elecraft] P3 with KPod

2016-09-01 Thread Randy Farmer
This is a capability that's not currently available. There are a few of us out here who would also like to see it happen, but given that the K-Pod communicates directly with the radio CPU it might take a good bit of software to make the radio talk back to the P3. I'm personally more hopeful

[Elecraft] P3 with KPod

2016-09-01 Thread Chuck Teague via Elecraft
I'm just getting started using macros, and would like to control the P3 via the KPod as much as possible. Can the Markers be controlled via the KPod knob. I can turn the markers on and off and qsy to one or the other, but can find no way to assign the P3 knob to the KPod knob. Am I missing

Re: [Elecraft] [P3] [PX3][PX3SVGA ] Display Text Decoding on the screen

2016-08-26 Thread Art Peters
Wayne, If you are looking for interested parties, I for one would be interested — also along with that mythical BIG amplifier if you ever get the itch again — hi hi 73, Art Peters, K0ACP k0...@k0acp.com > On Aug 24, 2016, at 11:52 PM, Wayne Burdick wrote: > > Hi Joe, >

Re: [Elecraft] [P3] [PX3][PX3SVGA ] Display Text Decoding on the screen

2016-08-24 Thread Wayne Burdick
Hi Joe, The hooks are in place, but I can't say for sure that we'll offer one. 73, Wayne N6KR On Aug 24, 2016, at 8:39 PM, "Joe Stone (KF5WBO)" wrote: > > Thank you, Wayne. On a related topic ... > > What's the history of the PX3SVGA (i.e., an internal SVGA

Re: [Elecraft] [P3] [PX3][PX3SVGA ] Display Text Decoding on the screen

2016-08-24 Thread Joe Stone (KF5WBO)
Thank you, Wayne. On a related topic ... What's the history of the PX3SVGA (i.e., an internal SVGA large screen adapter for the PX3) or lack there of? 73's Joe KF5WBO -- View this message in context:

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-24 Thread Jim Miller
what about that long-haired cat previously used while upgrading your synths? 73 jim ab3cv On Wed, Aug 24, 2016 at 8:23 PM, Wayne Burdick wrote: > Small matter of programming. > > There's plenty of code space, but just one lonely guy--Paul--tackling the > wish-list, working

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-24 Thread Wayne Burdick
Small matter of programming. There's plenty of code space, but just one lonely guy--Paul--tackling the wish-list, working in the bleak silence of the after-hours, armed with a keyboard and a slice of stale pizza but without so much as a small dog to keep him company. I can try slipping him an

[Elecraft] P3 Macros?

2016-08-24 Thread Jim Miller
Can the P3 macros be executed from the K3 since they all seem to have a # prefix? Will the command interpreter then send them to the P3 for execution? 73 jim ab3cv __ Elecraft mailing list Home:

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-24 Thread Joe Stone (KF5WBO)
Can we get a little more in-depth technical explanation as to why the P3 can't display decoded text on its TFT-LCD display? Neither the P3SVGA nor PX3 decode text. They simply display text characters already decoded by the K3 and KX3, respectively. Why can't the P3 write the text decoded by

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Don Wilhelm
Hajo, If you have not concluded by now from the various posts, the text decode for the P3 does not appear on the P3 display. With the P3SVGA option, text can be displayed on the attached SVGA display, and keyboard text will also be displayed and transmitted. You do not need a computer,

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Bill
Correct, is for a separate display! Bill K9YEQ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter Eijlander (PA0PJE) Sent: Tuesday, August 23, 2016 5:53 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] [P3] [Px3] Display Text Decoding

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Peter Eijlander (PA0PJE)
Hi Hajo, As far as I know (I do not have a K3/P3) the SVGA-card is an addition to the P3 that enables connection of a separate monitor. To my knowledge there is no need for a running computer. 73, Peter Op 2016-08-23 om 14:23 schreef Hajo Dezelski: I would not like to have an additional

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Hajo Dezelski
Thanks Walter and the others, So this explains the performance differences between Px3 and P3 . I don't want to miss the functionality of the Px3, so I fear I have to shovel a longer time money into the corner to fulfill my dream. 73 de Hajo DL1SDZ --- Cela est bien dit, ...,mais il faut

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Walter Underwood
Text decode was added after the original design of the P3. That was added using the P3SVGA. The PX3 was designed years later, and had decode built in. If you are waiting for the P3 to have text decode without the P3SVGA, you may have a very long wait. Like forever. wunder K6WRU Walter

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Nr4c
The option displays on an external SVGA display. You can not display decoded text on the P3, ever. Sent from my iPhone ...nr4c. bill > On Aug 23, 2016, at 3:45 AM, Hajo Dezelski wrote: > > Hello, > > I am considering to buy additionally to my Kx3/Px3 Combo a K3/P3

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Hajo Dezelski
Hello, And a big thank you to all who have responded and saved me a lot of money. The Kx3 and the K3 without waterfall etc. are in my eyes part of the fun which I don't want to miss anymore. So I thought that the wealth of features on the Px3 would be implemented on the P3 too, but obviously

Re: [Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Don Wilhelm
Hajo, You must buy the P3SVGA to obtain the text display. 73, Don W3FPR On 8/23/2016 3:45 AM, Hajo Dezelski wrote: I am considering to buy additionally to my Kx3/Px3 Combo a K3/P3 Station. After reading the P3 manual up and down I found no way to switch on text decode display on the P3 screen

[Elecraft] [P3] [Px3] Display Text Decoding on the screen

2016-08-23 Thread Hajo Dezelski
Hello, I am considering to buy additionally to my Kx3/Px3 Combo a K3/P3 Station. After reading the P3 manual up and down I found no way to switch on text decode display on the P3 screen without installing P3SVGA. Did I miss something or do I have to buy the additional option. 73 de Hajo DL1SDZ

Re: [Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-14 Thread David F. Reed
Happy to report after extensive testing, that your suggestion was the effective fix I had hoped for. Thank you sir! 73 de Dave, W5SV On 8/12/2016 03:49, David F. Reed wrote: Howard, thanks for the idea; I now have things set as you suggest. Because it was intermittent it may take a while

Re: [Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-11 Thread Vic Rosenthal
I would have guessed that this was it. If you have a strong RF source in the neighborhood, then incoming power reflected back from the K3 would look like forward power from the rig, and might be enough to trigger it. I have a 50 kW AM BC station that I can see from my antenna, and lots of

Re: [Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-11 Thread David F. Reed
Howard, thanks for the idea; I now have things set as you suggest. Because it was intermittent it may take a while to know if its "fixed" or not, so I will report back after more testing. Thanks again for the idea. 73 de Dave, W5SV On 8/12/2016 01:48, Howard Stephenson wrote: Dave, Try

Re: [Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-11 Thread Howard Stephenson
Dave, Try this from P3 MCU 1.60 / SVGA 1.34 / March 21, 2016 release notes: Enable/disable TX sensing at the TxMon coupler: Added TxSensEn to TxMon sub-menu. This allows enabling/disabling of transmit sensing at the coupler. For K3 and K3S users, TxSensEn can be set to “disabled”, which will

Re: [Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-11 Thread David F. Reed
Don, thanks for the help; I will answer your questions in line between them... On 8/11/2016 22:29, Don Wilhelm wrote: Dave, What do you see on the display when that happens? If there is no TX RF present, you should see a straight line. If you are seeing an envelope display, then the K3 is

Re: [Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-11 Thread Don Wilhelm
Dave, What do you see on the display when that happens? If there is no TX RF present, you should see a straight line. If you are seeing an envelope display, then the K3 is actually going into transmit. If you have a computer connection and also have the K3 menu parameter for PTT-KEY set

[Elecraft] P3 TXMonitor sometimes displays during receive

2016-08-11 Thread David F. Reed
Using my P3 monitor, set to display when TX is going on, sometimes goes into displaying TX for a few seconds while I am receiving. Has anyone else seen this, and know of a fix? Thanks & 73 de W5SV, Dave __ Elecraft mailing list Home:

Re: [Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread Nr4c
ssage- From: David F. Reed > Sent: Monday, August 08, 2016 3:06 PM > To: elecraft Reflector > Subject: [Elecraft] P3 tx Monitor on VGA? > > I suspect this has been asked before, but I don't recall the answer... > > I note that I really enjoy the TX monitor aspects of my

Re: [Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread Clay Autery
Me too!!! For sure!!! __ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 8/8/2016 4:22 PM, Ronnie Hull wrote: > I too would like to see this! > > Ronnie W5SUM > > Sent from my iPhone > >> On Aug 8, 2016, at 4:06 PM, David F. Reed wrote: >> >> I

Re: [Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread David F. Reed
display beautifully. Leroy AB7CE -Original Message- From: David F. Reed Sent: Monday, August 08, 2016 3:06 PM To: elecraft Reflector Subject: [Elecraft] P3 tx Monitor on VGA? I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor

Re: [Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread lmarion
Yes there is cake. Install the SVGA option. It displays on my 27 inch display beautifully. Leroy AB7CE -Original Message- From: David F. Reed Sent: Monday, August 08, 2016 3:06 PM To: elecraft Reflector Subject: [Elecraft] P3 tx Monitor on VGA? I suspect this has been asked before

Re: [Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread Eric Swartz - WA6HHQ, Elecraft
Hi David, Not at this time. 73, Eric /elecraft.com/ On 8/8/2016 2:06 PM, David F. Reed wrote: I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor aspects of my P3; however I miss it on the external VGA display. Is there any way

Re: [Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread Ronnie Hull
I too would like to see this! Ronnie W5SUM Sent from my iPhone > On Aug 8, 2016, at 4:06 PM, David F. Reed wrote: > > I suspect this has been asked before, but I don't recall the answer... > > I note that I really enjoy the TX monitor aspects of my P3; however I miss it

[Elecraft] P3 tx Monitor on VGA?

2016-08-08 Thread David F. Reed
I suspect this has been asked before, but I don't recall the answer... I note that I really enjoy the TX monitor aspects of my P3; however I miss it on the external VGA display. Is there any way to set things to get both on the external monitor? If not currently, is it on a to do list? Just

[Elecraft] P3 TXMON ISSUE

2016-08-06 Thread Michael Murphy
While working the NAQP CW contest this afternoon, I noticed that the TX Monitor was not always indicating the correct power or SWR. Also the waveform was not always displaying properly (sometimes is is just a a wavy line instead of the usual waveform). I took the cables off the P3 and the

[Elecraft] P3 TX monitor question

2016-08-03 Thread David F. Reed
Apparently I have messed some menu entry up, but cannot figure out how to fix it. I have gotten into a mode that flashes periodically (about a second each) between the RX Pan display and the TX monitor. Because it is flashing, it is hard to read the menu and figure out what to set. Anyone

Re: [Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

2016-07-28 Thread Charles Johnson
Same exact issue here. The P3 screen also became slow to refresh, like once every 5 seconds. Turn K3 and P3 off/on solved the issue. This only happened after a screen capture. Charles, K4ZRJ > On Jul 28, 2016, at 8:02 AM, w4sc wrote: > > I had this issue also. The “0”

[Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

2016-07-28 Thread w4sc
I had this issue also. The “0” reading appeared after making and saving a couple of screen captures. Recycling the power on the P3 did not correct. Closing the “COMM PORT” and reopening did correct it. I have had other issues with this connection to the P3 through the K3S USB connection.

Re: [Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

2016-07-28 Thread Charles
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

2016-07-28 Thread Don Wilhelm
Bret, Do you have the RJ-45 plugged completely into the K3S? Push on the cable (not the hood) until you hear a click - or pull back the hood and push directly on the plug, again until it clicks. 73, Don W3FPR On 7/28/2016 5:38 AM, MaverickNH wrote: Hi All, Just setting up my new K3S/P3

[Elecraft] P3 - Center/Top Spectrum Frequency Stays Zero?

2016-07-28 Thread MaverickNH
Hi All, Just setting up my new K3S/P3 w/SVGA/TXMON. At the center/top of the P3 spectrum display, the manuals show a frequency, but mine just stays 0 (zero). Must be I'm missing how to change that? Otherwise, I see spectra and waterfalls. Thanks, 73s, Bret/KC1CJN -- View this message in

Re: [Elecraft] P3 with K2?

2016-07-14 Thread Sverre Holm (LA3ZA)
Hi Tom Looking forward to hearing about your results! Tom Azlin W7SUA wrote > Good question. I ordered one and will find out when I try to put it in. > I could find no instructions but have not written back to see if they > have any. > > 73, tom w7sua 73 - Sverre, LA3ZA K2 #2198, K3

Re: [Elecraft] P3 with K2?

2016-07-13 Thread Tom Azlin W7SUA
Good question. I ordered one and will find out when I try to put it in. I could find no instructions but have not written back to see if they have any. 73, tom w7sua On 7/13/2016 2:51 PM, Sverre Holm (LA3ZA) wrote: The QRP shop IF buffer amplifier looks spot on, but does anyone have any

Re: [Elecraft] P3 with K2?

2016-07-13 Thread Sverre Holm (LA3ZA)
The QRP shop IF buffer amplifier looks spot on, but does anyone have any experience with it? The information is a bit sparse, but says "Small Kit do provide the K2 with a buffered IF Output. Installation with or without Noiseblanker possible. " It seems like it fits in the connector of the noise

Re: [Elecraft] P3 with K2?

2016-07-13 Thread Tom Azlin W7SUA
How about this one? https://sage-shop.com/epages/qrp-shop.sf/en_GB/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBest%C3%BCckt A K2 IF adapter kit from QRP shop https://sage-shop.com/epages/qrp-shop.sf/en_GB/ ?? 73, tom w7sua On 7/13/2016 5:06 AM, Don Wilhelm wrote: Tom, The answer is

Re: [Elecraft] P3 with K2?

2016-07-13 Thread Don Wilhelm
Tom, The answer is "yes" and "maybe". The P3 can tune to the K2 IF easily enough (menu setting) - in fact it can be tuned to anywhere between 455kHz and 21MHz. The problem is getting the IF out of the K2. To accomplish that, a buffer amplifier is needed to keep from loading the K2 IF.

[Elecraft] P3 with K2?

2016-07-13 Thread Thomas Taylor
Can the P3 display unit be used with a K2? If so, are mods necessary for either the K2 or P3? Thanks, Tom Taylor KE7TT -- Ever notice the first thing you see at an airport is a big sign that says "TERMINAL"? Have a nice flight. - Lewis Grizzard ^^ --... ...-- / -.- . --... - -

Re: [Elecraft] P3 wireles keyboard

2016-07-11 Thread Cady, Fred
7x.com. From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of William Lagerberg <pe1...@zendamateur.nl> Sent: Monday, July 11, 2016 5:12 AM To: Elecraft Reflector Subject: [Elecraft] P3 wireles keyboard Hi Group, I think there has been told a lot about

Re: [Elecraft] P3 wireles keyboard

2016-07-11 Thread Ron D'Eau Claire
On Behalf Of William Lagerberg Sent: Monday, July 11, 2016 4:13 AM To: Elecraft Reflector Subject: [Elecraft] P3 wireles keyboard Hi Group, I think there has been told a lot about wireless keyboard an Kpod etc etc. But Is it possible to get a wireless keyboard connected to the P3 somewhe

Re: [Elecraft] P3 wireles keyboard

2016-07-11 Thread Bill Frantz
All the Apple keyboards I have seen have built in USB hubs. (And I have a lot of them kicking around the house.) Since the P3 does not support hubs, they won't work. 73 Bill AE6JV On 7/11/16 at 7:15 AM, kf5...@wickedbeernut.com (Joe Stone (KF5WBO)) wrote: I wouldn't be surprised that an

Re: [Elecraft] P3 wireles keyboard

2016-07-11 Thread Bill
I use a Logitech, Works fine. Bill K9YEQ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of William Lagerberg Sent: Monday, July 11, 2016 6:13 AM To: Elecraft Reflector <elecraft@mailman.qth.net> Subject: [Elecraft] P3 wireles keyboard Hi

Re: [Elecraft] P3 wireles keyboard

2016-07-11 Thread Joe Stone (KF5WBO)
Here's the list of keyboards supported in conjunction with the PX3 and P3SVGA, http://www.elecraft.com/manual/px3_keyboard_list_A3.pdf For some reason, the file name and title suggests this list is specific to the PX3, but the list itself states, "Keyboards listed were available when

[Elecraft] P3 wireles keyboard

2016-07-11 Thread William Lagerberg
Hi Group, I think there has been told a lot about wireless keyboard an Kpod etc etc. But Is it possible to get a wireless keyboard connected to the P3 somewhere i read that a 2.4 Ghz remote keyboard would work ??? Is there somebody who has experience, I have many apple keyboard but every

Re: [Elecraft] P3 function buttons

2016-07-10 Thread Fred Jensen
Well Dave ... I have a number of keys on my K3 to which I can assign macro functions. I have one assigned ... PF1=SPKR+PH ON/OFF. I have the 8 soft-keys on my P3 of which 4 are assigned so far [in 3 years], and I use only two, and rarely them. I have 8 macro keys on my Pigknob plus the

[Elecraft] P3 function buttons

2016-07-10 Thread Dave Fugleberg
At Dayton this year, one of the gentlemen at the Elecraft booth (I believe his name was David) took the time to walk me through the P3 and all its functions. That really opened my eyes to what it could do. I ordered the basic P3 kit (without the options) the next day. I've had it connected to my

Re: [Elecraft] P3 TX Mon

2016-07-09 Thread Don Wilhelm
Chris, The TXMON uses a in-line sampling coupler. The choices are 200 watt and 2000 watt. The 2000 watt coupler displays power in 1 watt increments while the 200 watt displays the power in 0.1 watt units. Whether that is adequate for your needs or not is only for you to say. 73, Don

[Elecraft] P3 TX Mon

2016-07-09 Thread Chris Lewis
Hi, Can anyone please tell me how the TX monitor facility on the P3 picks up RF? As there are two options, 100w and 2KW, is it an inline sampling device on the antenna cable, please? If you have the 2KW version, does it work adequately when running barefoot at 100w? Thanks 73 Chris

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-18 Thread Dr. William J. Schmidt, II
One of the guys at Elecraft (Mike?) did this with a cheap switch box available off Amazon. I took that box and added some video analog switches and a band decoder to do it automagically and basis power level. Its a simple matter to do. Just get creative. Dr. William J. Schmidt - K9HZ J68HZ

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-18 Thread Ron D'Eau Claire
tra sensor cable with male RJ45 connectors to attach the switch box to the P3. A suitable 6-foot W2 Sensor Cable available from Elecraft (Order E850638). 73, Ron AC7AC -Original Message- Subject: Re: [Elecraft] P3/TX Mon Coupler Switching Idea > I am thinking of getting a 2nd DCHF C

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-18 Thread Clay Autery
To make sure I have truly beat this horse to death... Go here: *http://www.elecraft.com/manual/P3%20Xmit%20Mon%20FAQ-ver-A-7.pdf * This is a Tx Mon FAQ... Page 6, 3c. "These 2 items will be connected with CAT5/CAT6 cable plugging into RJ45 jacks." "RJ8" in the Tx Mon Installation Manual is a

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-18 Thread Clay Autery
Followup: Looking in the manual, the picture of the TXMON board clearly shows that the modular jack has 8 conductors. I'm almost certain that is an RJ-45 8P8C jack... But from what I can see, they are using AT LEAST conductors 2,4,6, and 8... (the solid wires for both 568A and 568B). You can see

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-18 Thread Clay Autery
FYI, an RJ-8 modular plug will plug right in to an RJ-45 modular jack The retention key on the connector centers it in the RJ-45 jack so that the 4 center conductors are lined up. The key to making this work is to verify: 1) How are the jacks wired on the switch: 568A or 568B. 2) Match up

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-18 Thread Mike VE3YF
Hi Alan: Tnx for the info, good to see someone else has done it. Question though, does the Coupler cable use RJ45 connectors, reason I ask I see on the Elecraft site it says RJ8, and I am not finding too much info on the Internet ref RJ8 Connectors. Perhaps I am reading too much into it. 73

Re: [Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-17 Thread Alan Bloom
> I am thinking of getting a 2nd DCHF Coupler for my P3 TX Monitor > Setup. This way I could Monitor 2 Outputs from the same P3. ... > Does anyone know of a switch that could handle this job. Here's the one I use. It allows switching up to four 8P8C (RJ-45) connectors. $10 from Amazon:

[Elecraft] P3/TX Mon Coupler Switching Idea

2016-06-17 Thread Mike VE3YF
I am thinking of getting a 2nd DCHF Coupler for my P3 TX Monitor Setup. This way I could Monitor 2 Outputs from the same P3. Currently I have a coupler right after my main linear via Ant 1 on the K3, but want to add a second coupler to the output of the KPA500 via Ant 2 on the K3. I then could

Re: [Elecraft] P3 - soft key labels disappeared

2016-06-17 Thread Mike K2MK
Hi Fred, The bottom right button has two functions. If you press the button you get the menu. If you hold the button the screen expands to a full view less the function key labels. You must have accidentally held the button too long. Hold it again and the F-key labels should reappear. 73, Mike

[Elecraft] P3 - soft key labels disappeared

2016-06-16 Thread Fred Jensen
So, before I just go fix this ... I run my K3 both locally and remote to W7RN. Was remote last night in the 0300Z CWT, P3 doesn't work of course in remote, and local tonite the soft-key labels for FN1-FN8 are gone. Tried the usual with no good results. Before I dig out the manual and

Re: [Elecraft] P3 Firmware and PigKnob

2016-06-15 Thread Joe Stone (KF5WBO)
Hi Randy, I've been thinking of pulling the trigger on a K-Pod, but in retrospect what I really need most is a way to move the marker and simulate a knob press remotely on the P3. [js] This is exactly what I’m after ... only with the PX3. Of course, if you can control the PX3 / P3 markers using

[Elecraft] P3 Firmware and PigKnob

2016-06-15 Thread Randy Farmer
I've been thinking of pulling the trigger on a K-Pod, but in retrospect what I really need most is a way to move the marker and simulate a knob press remotelyon the P3. The ability to control the radio this way without having to move my hands away from the keyboard would be a wonderful tool

Re: [Elecraft] P3 SVGA Feature Request

2016-06-15 Thread Dave Cole
On Wed, 2016-06-15 at 12:02 -0700, KD3RF wrote: > It would be great if the VGA adapter showed tic marks and frequency > across > the top or bottom of the display screen every 10 kHz or so like in > this > mocked-up picture. > >   >

[Elecraft] P3 SVGA Feature Request

2016-06-15 Thread KD3RF
It would be great if the VGA adapter showed tic marks and frequency across the top or bottom of the display screen every 10 kHz or so like in this mocked-up picture. Scaling of the frequency display should change as bandwith is

[Elecraft] P3 Lines

2016-06-12 Thread David
My P3 has developed some white horizontal lines on the screen that come and go sometimes many and sometimes a few I reseated the ribbon cable but did not think that to be it anyway and it made no difference. any ideas Dave VE3SD (ve3dvy) .

[Elecraft] P3 Kit Pricing

2016-05-26 Thread Brian D. Comer
I am sure the extra cost for building and testing any of the Elecraft products is worth the money if that is the way someone wants to go. All the Elecraft products I have, or have had, were built by my son Andrew KK6EME that includes 2 K3s, P3, KX3, KPA500, KXPA100 and a K2 /100(sold). The only

[Elecraft] P3 pricing

2016-05-25 Thread Johnny Siu via Elecraft
) in the past. 73 Johnny VR2XMC 寄件人︰ Gmail - George <gdanne...@gmail.com> 收件人︰ Elecraft@mailman.qth.net 傳送日期︰ 2016年05月26日 (週四) 8:26 AM 主題︰ Re: [Elecraft] P3 pricing Maybe Elecraft can weigh-in about the "Burn-In Time" for the boards used in the kits. I have all

Re: [Elecraft] P3 pricing

2016-05-25 Thread Gmail - George
Maybe Elecraft can weigh-in about the "Burn-In Time" for the boards used in the kits. I have all kits and suspect that my Elecrafts are actually as good as factory except they were assembled by a rank amateur (Elecraftwise). I do know that I had no qualms about modify the filters or motherboard

[Elecraft] P3 pricing

2016-05-25 Thread Gee
I disagree that factory built value is nil. When I bought my K3 I was told factory builds went through a 24 hour burn in, and then checked for specs. That to me is value. If a used item is 75% or more of new item pricing, the warranty alone decides for me to buy new. Sent from my iPad

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Bob
Amen! I also feel I got a Premium product too and has been worth the price. I bought my K3 used and got about a 25% savings. I never felt that Elecraft support treated me any different than an original purchaser, that was a plus and helped lead me down road to the complete K-line purchase,

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Jim Brown
On Wed,5/25/2016 7:17 AM, Jerry Moore wrote: I already feel that Elecraft gear prices are a premium but have been willing to pay the NIB prices to support a local US company. I see it a bit differently. Elecraft products are built, designed, and supported by people in the US, all paid US

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Dave Cole
On Wed, 2016-05-25 at 10:17 -0400, Jerry Moore wrote: > Is it realistic for used P3s to sell for 80% of retail value when they > don't have a warranty, you don't know if they've been tinkered with, > you don't know if they are 100%, and the possibility of not getting a > cable or part that comes

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Jerry Moore
Thank you for your well thought out response. -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Cole Sent: Wednesday, May 25, 2016 12:55 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] {P3] resale value On Wed, 2016-05-25 at 10:17 -0400

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Dave Cole
On Wed, 2016-05-25 at 11:57 -0400, Jerry Moore wrote: > I'm a gamer so my keyboards are programmable. Why the P3 blocks > intelligent keyboards confuses me.  I can't either...  They had to go to extra work to make that happen, so it is not by accident. -- 73's, and thanks, Dave (NK7Z) For

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Phil Wheeler
Jerry, I agree with Bill. Not much to tinker with in a P3, you just connect it and use it -- unless you add the SVGA board. And, unlike my K3, the P3 is current production: So far as I know there is no P3s. 73, Phil W7OX On 5/25/16 8:22 AM, Nr4c wrote: Jerry. It's only worth what you

Re: [Elecraft] {P3] resale value

2016-05-25 Thread Jerry Moore
r.com] Sent: Wednesday, May 25, 2016 11:23 AM To: Jerry Moore Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] {P3] resale value Jerry. It's only worth what you are willing to pay. Making sure you get the cables shouldn't be a big problem. Otherwise I've not heard of many (if any) issues wi

<    3   4   5   6   7   8   9   10   11   12   >