Re: [Emc-users] Learning LinuxCNC Youtube Channel

It's good that you are doing this. It you want to improve the audio the #1 rule is to place the microphone as close as possible. It sounds to me like it is far enough away to pick up so room echo. I'd invest in a good cavalier microphone. Better method is to do the audio as a voice over after

Re: [Emc-users] Learning LinuxCNC Youtube Channel

To buy a few year old computer is another cheap option. > I have posted another video about building pc for LinuxCNC > > https://www.youtube.com/watch?v=wuBySmg2e3Y > > Jim > > -- > Transform Data into Opportunity. > A

Re: [Emc-users] Using a vfd vs G33.1

On Sunday 13 March 2016 00:19:35 Danny Miller wrote: > Without an external braking resistor, the deceleration is much more > limited. What happens is the back EMF charges the main bus capacitor, > and it will go into an overvolt error and simply freewheel to avoid > charging it further to a point

Re: [Emc-users] Using a vfd vs G33.1

Without an external braking resistor, the deceleration is much more limited. What happens is the back EMF charges the main bus capacitor, and it will go into an overvolt error and simply freewheel to avoid charging it further to a point where it will damage the cap. I have a 3KW air-cooled mil

[Emc-users] Using a vfd vs G33.1

Greetings everybody; Given that I note the vfd's seem to have an adjustable accelleration control, and that my couple of hours playing with it from its own front panel, I am led at ask the question of just how fast can one of these things be reversed from say 1000 rpm at the motor spindle? I a

Re: [Emc-users] Getting rid of useless Z motions.

On Saturday 12 March 2016 20:34:55 Gene Heskett wrote: > Greetings everyone; > > I noted that at the bottom in the (sim) axis.ini, three entries for > some tool changer presets, like TOOL_CHANGE_POSITION etc. So I copied > them to the 2.8.0pre2-yadda on the GO704's axis.ini. > > WHat I want to do

[Emc-users] Getting rid of useless Z motions.

Greetings everyone; I noted that at the bottom in the (sim) axis.ini, three entries for some tool changer presets, like TOOL_CHANGE_POSITION etc. So I copied them to the 2.8.0pre2-yadda on the GO704's axis.ini. WHat I want to do is to have it use that data IF its going to cgange the tool, or

Re: [Emc-users] Learning LinuxCNC Youtube Channel

I have posted another video about building pc for LinuxCNC https://www.youtube.com/watch?v=wuBySmg2e3Y Jim -- Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acce

Re: [Emc-users] That TTS to er20 adapter package we all jumped on.

On Saturday 12 March 2016 10:50:00 Danny Miller wrote: > Well, this has got me intrigued. > > What are the ATC spindle options nowdays that would work for a wood > router? > > http://www.blurrycustoms.com/#!store/cu2p/!/AVX3/p/35336572/category=9 >308353 >

Re: [Emc-users] That TTS to er20 adapter package we all jumped on.

Well, this has got me intrigued. What are the ATC spindle options nowdays that would work for a wood router? http://www.blurrycustoms.com/#!store/cu2p/!/AVX3/p/35336572/category=9308353 Cheapest I see is a $3600

Re: [Emc-users] That TTS to er20 adapter package we all jumped on.

On Saturday 12 March 2016 06:15:00 Gene Heskett wrote: > On Friday 11 March 2016 22:58:15 Bruce Layne wrote: > > Your eBay-foo is weak, old man. :-) > > So it appears. > > > The ER20 collet holders seem to be going for $160 per ten pack, > > delivered from Asia. > > > > http://www.ebay.com/itm/28

Re: [Emc-users] That TTS to er20 adapter package we all jumped on.

On Friday 11 March 2016 22:58:15 Bruce Layne wrote: > Your eBay-foo is weak, old man. :-) So it appears. > > The ER20 collet holders seem to be going for $160 per ten pack, > delivered from Asia. > > http://www.ebay.com/itm/281924305409 > > http://www.ebay.com/itm/252015116411 I THINK I looked