Re: [Emc-users] Latency Warning Messages

I bought 3 different low profile video cards to try and get rid of that latency message. The ultimate and best solution was to buy the MESA 7i92H. Does away with the parallel port completely. John Dammeyer > -Original Message- > From: Thomas D. Dean [mailto:tomd...@wavecable.com] >

[Emc-users] Latency Warning Messages

My CNC computer was purchased several years ago from Sherline with CNC installed. I have two disk drives. One has linuxcnc-2.7.14-wheezy.iso and the other has linuxcnc-stretch-uspace-amd64.iso. On both OS's, I see 'unexpected latency warning messages', infrequent on 'wheezy' and 99% of the

Re: [Emc-users] linuxcnc versions

When you start up LinxuCNC you can click on an ICON that takes you to the folder that has the .ini and .hal files. I have 2 icons on the desktop, one for the parallel port version and one for the MESA 7i92H. For the last little while the MESA card has been sitting on the side and the PC

Re: [Emc-users] 6i24 + 7i44 configuration

I understand. I'm running my DC servo's open loop with step/dir. So far any issues that show up are caught by the drives following error fault so I don't see any reason to close the loop inside Linux. And in any case then I wouldn't be able to swap back and forth between MACH3 and LinuxCNC.

Re: [Emc-users] 6i24 + 7i44 configuration

On Sun, 15 Dec 2019, Leonardo Marsaglia wrote: Date: Sun, 15 Dec 2019 23:27:16 -0300 From: Leonardo Marsaglia Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] 6i24 + 7i44 configuration Hello John, I don't know If I

Re: [Emc-users] 6i24 + 7i44 configuration

Hello John, I don't know If I understand you correctly, but I already have the boards and I intend to use the 7i70 for inputs (I have already 6 inductive sensors only for the turret and also all the limit switches and some other switches for the tailstock and tail body). Then I have more than 10

Re: [Emc-users] linuxcnc versions

I don't know if it is ok to post a screenshot here, but this is what I get to see in Debian (see attached). Also, in linuxcnc, can I use two different parallel ports and hook a mill up to one and a lathe to the orher and use either one in linuxcnc (or does that mean I need to

Re: [Emc-users] 6i24 + 7i44 configuration

Let's see: 6i24 = $139 7i33 = $69 7i47 = $69 7i44 = $69 7i77 = $119 (48 outputs, not really for buttons?) 7i70 = $79 (48 inputs not really for Relays) = $544 Perhaps take a step back and make a list of how many inputs and outputs you expect to need. Wouldn't a 7i78+5i25 Plug-n-go

Re: [Emc-users] 6i24 + 7i44 configuration

Thank you very much Peter, that would be really helpful. El dom., 15 dic. 2019 a las 22:57, Peter C. Wallace () escribió: > On Sun, 15 Dec 2019, Leonardo Marsaglia wrote: > > > Date: Sun, 15 Dec 2019 22:45:23 -0300 > > From: Leonardo Marsaglia > > Reply-To: "Enhanced Machine Controller (EMC)" >

Re: [Emc-users] 6i24 + 7i44 configuration

On Sun, 15 Dec 2019, Leonardo Marsaglia wrote: Date: Sun, 15 Dec 2019 22:45:23 -0300 From: Leonardo Marsaglia Reply-To: "Enhanced Machine Controller (EMC)" To: "Enhanced Machine Controller (EMC)" Subject: Re: [Emc-users] 6i24 + 7i44 configuration By the way, I'm using the 6i24-25 board

Re: [Emc-users] 6i24 + 7i44 configuration

By the way, I'm using the 6i24-25 board and I'm using LinuxCNC 2.7.14 on Debian 7 Wheezy as it comes with the .iso file. El dom., 15 dic. 2019 a las 22:29, Leonardo Marsaglia (< ldmarsag...@gmail.com>) escribió: > Hello again. > > I'm testing my boards and configuration before I install

Re: [Emc-users] linuxcnc versions

I just down;oaded it again and did a diff on the one I had and the one I just downloaded, they are the same (the size if the same too). -rw-rw-r--  1 rocr rocr 1212776448 Dec 15 18:29 linuxcnc-2.7.14-wheezy.iso -rw-rw-r--  1 rocr rocr 1212776448 May 23  2019 linuxcnc-2.7.14-wheezy.iso (looks

[Emc-users] 6i24 + 7i44 configuration

Hello again. I'm testing my boards and configuration before I install everything on the real machine. I'm configuring a lathe with 2 servos for the X and Z axis, one PWM converted to analog for the spindle, and one encoder input for the spindle. Also a lot of input and outputs to deal with. For

Re: [Emc-users] linuxcnc versions

On 12/15/19 11:53 AM, andy pugh wrote: On Sun, 15 Dec 2019 at 19:39, R C wrote: That was a couple of weeks ago, mayb even 2 months. The Wheezy ISO was updated to reference the archive repository on the 24th of May. It sounds like your download was comfortably after that. So that seems to

Re: [Emc-users] linuxcnc versions, repository URL

Ok, I'll try it again, tomorrow probably. Ron On 12/15/19 1:04 PM, N wrote: when I installed the 2.7.14 version,  it wants to connect to a repo that doesn't exist. My HEAD got totally detached but remember I had to switch repository url before that happened a while ago.

Re: [Emc-users] linuxcnc versions

I'll download them both again, and install them, probably omorrow. it's the link on the linuxcnc download page, right? Ron On 12/15/19 12:53 PM, andy pugh wrote: On Sun, 15 Dec 2019 at 19:39, R C > wrote: That was  a couple of weeks ago, mayb even 2 months.

Re: [Emc-users] linuxcnc versions, repository URL

> when I installed the 2.7.14 version,  it wants to connect to a repo that > doesn't exist. My HEAD got totally detached but remember I had to switch repository url before that happened a while ago. ___ Emc-users mailing list

Re: [Emc-users] linuxcnc versions

On Sun, 15 Dec 2019 at 19:39, R C wrote: > That was a couple of weeks ago, mayb even 2 months. > The Wheezy ISO was updated to reference the archive repository on the 24th of May. It sounds like your download was comfortably after that. So that seems to indicate that the repository fix did

[Emc-users] Semi OT: Question about field power on Mesa 7i71 daughter card

Hello to the list, I'm about to connect a 7i71 I bought a year ago to the 7i44 (wich is plugged to a 6i24). I've read in the 7i71 docs that one must not use a direct switch to drive the field power on the 7i71 to avoid voltage to scalate too quickly. My question is: is there any recommended

Re: [Emc-users] linuxcnc versions

That was  a couple of weeks ago, mayb even 2 months. I'll try to install the new ones on some swappable disks tomorrow. On 12/15/19 12:24 PM, andy pugh wrote: On Sun, 15 Dec 2019 at 19:23, R C wrote: my machine is connected through a switch. I checked to see where it is trying to connect

Re: [Emc-users] linuxcnc versions

On Sun, 15 Dec 2019 at 19:23, R C wrote: > my machine is connected through a switch. I checked to see where it is > trying to connect to, it seems it wants to connect to an (old) repo, > that doesn't exist anymore or has been archived or so. > > I did that a month or two ago. Can you state

Re: [Emc-users] linuxcnc versions

my machine is connected through a switch.  I checked to see where it is trying to connect to, it seems it wants to connect to an (old) repo, that doesn't exist anymore or has been archived or so. I did that a month or two ago. Ron On 12/15/19 12:13 PM, Dave Matthews wrote: I also had to

Re: [Emc-users] linuxcnc versions

On 12/15/19 12:15 PM, andy pugh wrote: On Sun, 15 Dec 2019 at 19:04, R C > wrote: when I installed the 2.7.14 version,  it wants to connect to a repo that doesn't exist. That should have been fixed in the currently-available image. Are you saying that the

Re: [Emc-users] linuxcnc versions

On Sun, 15 Dec 2019 at 19:04, R C wrote: > when I installed the 2.7.14 version, it wants to connect to a repo that > doesn't exist. > That should have been fixed in the currently-available image. Are you saying that the problem is still there in the current file? > The debian 9.5 one does

Re: [Emc-users] linuxcnc versions

I also had to use the text based installer. The GUI based one was hanging on my wifi dongle and I couldn't find a way to bypass it connecting to the network. It saw the network and asked for credentials and then failed to make the connection. The text one has an option to not do the network

Re: [Emc-users] linuxcnc versions

when I installed the 2.7.14 version,  it wants to connect to a repo that doesn't exist. It can't find some repo and aborts the install (doesn't even start thye actual install) The debian 9.5 one does install (although it doesn't install correctly if there is more then 1 hard drive) On

Re: [Emc-users] linuxcnc versions

> On 15 Dec 2019, at 02:48, R C wrote: > > I'll download and try that now. Try the Stretch ISO first. Wheezy is problematically ancient. ___ Emc-users mailing list Emc-users@lists.sourceforge.net

Re: [Emc-users] (no subject) Position logger, sampler?

@John Dammeyer actually not work with nml file but is connected via modbus to linuxcnc in these days I work again for remove modbus connection and use nml file instead. I need only dro, start,stop, abort, pause,play and other some classic cms and msg for run a robot I plan