On Monday 28 May 2018 21:56:00 Jon Elson wrote:
> On 05/28/2018 08:12 PM, Gene Heskett wrote:
> > On Monday 28 May 2018 15:12:46 Jon Elson wrote:
> >> more /proc/meminfo
> >
> > gene@GO704:~$ sudo cat /proc/meminfo
> > [sudo] password for gene:
> > MemTotal:2059220 kB
> > MemFree:
On 05/28/2018 08:12 PM, Gene Heskett wrote:
On Monday 28 May 2018 15:12:46 Jon Elson wrote:
more /proc/meminfo
gene@GO704:~$ sudo cat /proc/meminfo
[sudo] password for gene:
MemTotal:2059220 kB
MemFree: 1424600 kB
Buffers: 44556 kB
Cached: 372816 kB
On Monday 28 May 2018 15:12:46 Jon Elson wrote:
> On 05/28/2018 03:47 AM, Gene Heskett wrote:
> > On Sunday 27 May 2018 23:54:57 Gene Heskett wrote:
> >
> > I forgot to mention that while all that was being worked out, I had
> > to re-boot again as it had become completely unresponsive. And
> >
On Monday 28 May 2018 15:09:00 Jon Elson wrote:
> On 05/27/2018 10:54 PM, Gene Heskett wrote:
> > To Jon; I had to reset the pwm-servo several times, it was
> > tripping off at the m5, which is completely off while the
> > motor was cranking the spindle at 1500. So thinking about
> > the motors
On 05/28/2018 03:47 AM, Gene Heskett wrote:
On Sunday 27 May 2018 23:54:57 Gene Heskett wrote:
I forgot to mention that while all that was being worked out, I had to
re-boot again as it had become completely unresponsive. And still not a
clue in the syslog.
After starting LinuxCNC up, but
On 05/27/2018 10:54 PM, Gene Heskett wrote:
To Jon; I had to reset the pwm-servo several times, it was
tripping off at the m5, which is completely off while the
motor was cranking the spindle at 1500. So thinking about
the motors emf, I put an s100, g4p.5 in front of the m5.
Hasn't tripped
On Monday 28 May 2018 06:34:13 Marcus Bowman wrote:
> Gene,
>
> Knowing you have more experience of tricky tasks than I have, and
> seeing not much response to your question, I offer the following
> observations:
>
> I have forgotten the exact reason you are dealing, in places, with the
>
Gene,
Knowing you have more experience of tricky tasks than I have, and seeing not
much response to your question, I offer the following observations:
I have forgotten the exact reason you are dealing, in places, with the
locations of the co-ordinate systems (#5222 etc), but my inclination is
On Sunday 27 May 2018 23:54:57 Gene Heskett wrote:
> On Sunday 27 May 2018 19:37:04 Gene Heskett wrote:
> > On Sunday 27 May 2018 17:16:50 Gene Heskett wrote:
> > > Giveing up on the jig brace, I decided to make a wooden one as it
> > > doesn't have to last till the rapture. I laid out a circle,
On Sunday 27 May 2018 23:54:57 Gene Heskett wrote:
I forgot to mention that while all that was being worked out, I had to
re-boot again as it had become completely unresponsive. And still not a
clue in the syslog.
I'm going to glue a piece of pcb to the top of this, and start using a
g38.2
On Sunday 27 May 2018 19:37:04 Gene Heskett wrote:
> On Sunday 27 May 2018 17:16:50 Gene Heskett wrote:
> > Giveing up on the jig brace, I decided to make a wooden one as it
> > doesn't have to last till the rapture. I laid out a circle, then
> > contemplated how to draw this circle such that its
On Sunday 27 May 2018 17:16:50 Gene Heskett wrote:
> Giveing up on the jig brace, I decided to make a wooden one as it
> doesn't have to last till the rapture. I laid out a circle, then
> contemplated how to draw this circle such that its position was offset
> half a mm for each time that it was
Giveing up on the jig brace, I decided to make a wooden one as it doesn't
have to last till the rapture. I laid out a circle, then contemplated
how to draw this circle such that its position was offset half a mm for
each time that it was drawn, until I got the proper depth of cut.
Without
13 matches
Mail list logo
