Re: [Flexradio] activity

Until a new version of the code is released, or until someone shows us a picture of a cool tee-shirt. Then this reflector lights up. Dave /NX6D From: Chris Tate - N6WM Sent: Tuesday, June 6, 2017 13:38 To: Evert Bakker; flexradio@flex-radio.b

[Flexradio] Flexradio 1500/PowerSDR 2.7.2 question

quick fix? 73 David, G4YTL ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] Flex3000 no tx on 40m

Hi, My flex has ceased transmitting RF on 40m. No RF out with SSB, CW and Tune button responds ‘NO RF DETECTED.’ A fault with the rig? Other bands are fine. Regards, Dave. Sent from Mail for Windows 10 ___ FlexRadio Systems Mailing List FlexRadio

Re: [Flexradio] Calibrate 5000 S Meter

Just checked my 3000, right on the money.  What a great Radio.  Like to get a Signature Series but I have heard there is an annual software fee, is that correct?  Thanks Guys, de Jim, k4vw -Original Message- From: Dudley Hurry Sent: Saturday, July 11, 2015 10:27 PM To: ke...@3950.n

Re: [Flexradio] Mic Cord

I have just purchased a 6300 which made my HM Heil Pro obsolete because of the cord connections . can anyone recommend where I can get a new cord that is compatible with the 6300 and the Heil mic?   Thanks . Don   VA6FH ___ FlexRadio Systems Mai

[Flexradio] Flex 6300 For Sale

I have a Flex 6300 for sale. This radio is in excellent mechanical, electronic and cosmetic condition, and was in regular use until last week. It is just a year old. It comes with the original packaging, all wires and a new Flex FHM-1-8P hand mic. The SmartSDR software is available on the FlexRad

Re: [Flexradio] Monitor Speakers

The monitor speakers from Bose work great (From Target). However you must use isolation transformers to de couple the RF. Clamp on chokes are not enough. (Companion® 2 Series III multimedia speaker system ) about 99.00 from target. --- David P. Mitchell N5PSM http://www.arrl.org/BLD02ZU1

Re: [Flexradio] FlexRadio Digest, Vol 119, Issue 22

let 'ground' is NOT to be considered RF system ground. Conductors are too light and likely loop through many other points to some unknown eventual tie back to electrical common. That's for GFI safety retu

[Flexradio] Flex Control and RF

My Flex control is very sensitive to RF. Occasionally knocks out the USB port, need to reboot the PC to get it going again. Running 6700 and Intel I7 with Win7 64 bit. Was more frequent with the 5000A. I have some split toroids on the cable but this happens at the most inopportune moments. Sure

[Flexradio] Flex 5000A Forsale

Forsale: Beautiful Flex 5000A . Looks and operates as new. 2nd Receiver Antenna Tuning Unit (ATU) Firewire cable Power Cable Original box and packaging In anticipation of upgrading to the 6700 I sent this radio back to Flex and had it calibrated and checked out. Technician report: Meets current s

[Flexradio] Pixel Rx loop sold

Everyone: The Pixel Rx loop is sold; thank you. 73, Dave KJ9I >> ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] For Sale Pixel Rx loop

wall-wart power supply for preamplifier, the power inserter and control box, and the coaxial jumper cable from pre-amp to radio. Like new condition (used once for a brief test) in original factory packaging. $399 shipped continental 48 USA. David J. Schmocker KJ9I kj9idave (at) charter (dot)

[Flexradio] Tweaking the 1500 power out

My Flex 1500 produces only 3.5 watts at 50.1 MHz but that increases to 5 watts at 50.1 MHz. Is there any way of tweaking the output tuning to produce maximum power nearer to the bottom of the 6 metre band. David VK3AUU ___ FlexRadio Systems

[Flexradio] Moving to the FLEX6300

Well, I've sold my FLEX 3000 and moving on to the 6300. This reflector seem to cover just the older models, is there another one for the new models? 73, Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://m

[Flexradio] For Sale FLEX 3000 $1300 shipped

I have a very good condition FLEX 3000 in perfect working condition for sale. Wanting to upgrade to the new 6300 model so it's got to go! Comes with the original box, original manual, power cable, and a good quality Firewire cable. I'll also include a mic adapter that lets you use any 8 pin round c

Re: [Flexradio] Lightning Strikes

I will pile on just a bit more having also had similar experiences on several occasions both at work and at the house. 1. Have the station properly grounded with a common ground for the incoming power, antennas, antenna support, rig included. w8ji.com is a good resource (among many others) for g

[Flexradio] Flex 5000A for sale

And, of course, the instant I saw the message come back to me from the reflector, I realized I forgot to say that this radio for sale has the second receiver and ATU installed options installed. KK6FCH ___ FlexRadio Systems Mailing List FlexRad

[Flexradio] Flex 5000A for sale

I have a Flex 5000A for sale. This radio is in excellent mechanical, electronic and cosmetic condition, and was in regular use until about a month ago. It comes with the original packaging, power wire, data wire (FireWire), a printed copy of the latest PowerSDR document and a new Flex FHM-1-8P ha

Re: [Flexradio] VAC decides to force a few parameters and just like that, JT65 and JT9 stop working

Larry I think you may have a couple issues going on. One that Ken pointed out is that JT65/JT9 and associated programs, you must check your input and output audio card assignment each time you invoke the software, especially if you have rebooted. They can and do change. If you are running Window

[Flexradio] Sound card settings?

Gary, Regarding your email below. This is the first time I've notice that this might be a problem. I knew that all the settings inside PowerSDR should be the same but didn't know about the external sound card settings! So now I double checked, in 'setup' I have 'Audio' 'Primary' set to Buffer of 20

[Flexradio] Warning for Touchscreen users

The past few mornings I've come into the shack and found all sorts of strange windows popped up on my Touchscreen monitor. This morning I came in and Flex 5000 was in transmit (fortunately drive set at zero). Some Miller moths had taken a liking to my monitor and their bouncing off the scr

Re: [Flexradio] to order a 6300 or not.

Totally agree and well stated Mike. My introduction to SDR and Flex was about two years ago. I have truly enjoyed the challenge and learning curves, and have gained a great deal of respect for FlexRadio staff, support and commitment. I recently "graduated" from Flex 5000 to 6700 and have never

[Flexradio] Smart SDR s/w?

So, now that the new 6300 model is out it's got my attention. The hardware specs look great but what about the software? Is Smart SDR ready for prime time? Does it have all the features of the latest version PowerSDR software I'm using now with my FLEX3000? Are upgrades free or is there some kind o

[Flexradio] More band buttons?

I seem to recall several versions of PowerSDR back that we had more than 3 band clicks available. I'm not sure what to call it. Right now I can click a band button 3 times and get different freqs each time, 4th click, I'm back to the first freq. I was thinking there were 5 or 6 at one time. Or is t

[Flexradio] Noise Reduction??

rs is next to no noise reduction with NR, and almost no fiddling with the algorithm parameters to accommodate the narrowed bandwidth seems to help by much. But it works progressively better as the bandwidth grows wider. - 73 de Dave, N7AIG Dr. David McClain d...@refined-audiometric

[Flexradio] Audio distortion

Hi all, I've noted that when I have PSDR up in front of me my rx audio is great. If I tab out of it to look at something on the Internet there is some distortion. Any ideas why or how to maybe correct it?    73, David, AA9G ex W5DCG and K

[Flexradio] More on VAC and PowerSDR

Previously I wrote: Using the Flex 5K, PSDR 2.7.2. Using VAC 4.13, WIN7 64 bit CW Skimmer and MMTTY. > > Things work fine for a while then I change bands or some other minor > adjustment and the dreaded Whoops something went wrong with the audio. Sad > part is there are only a few thing to chan

[Flexradio] Flex 5K and VAC

Using the Flex 5K, PSDR 2.7.2. Using VAC 4.13, WIN7 64 bit CW Skimmer and MMTTY. Things work fine for a while then I change bands or some other minor adjustment and the dreaded Whoops something went wrong with the audio. Sad part is there are only a few thing to change and nothing works to get i

[Flexradio] Trying to buy VAC

w off list or heck if you did have an issue let me know that too and how easy it was resolved. I am very paranoid about giving my CC info to sites I don't know and doubly so with someone like Avangate and their list of complaints. Or maybe you used PP with no problem?    73, David, AA9G ex

[Flexradio] Serial number lookup.

Hi folks, Just wondering, if I wanted to find out how old my 3rd hand radio is using the serial # how would I go about it? Sent from Yahoo Mail on Android ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/l

[Flexradio] CW jack input on the Flex 5000

Guys, I don’t understand why Flex 5000 manual says that, when t using an external keyer, the “ring” connection of the stereo quarter inch plug is used, as well as the “tip” and the “sleeve.,” while for a straight key the “ring" is not connected. Don’t all external keyers just have two conducto

Re: [Flexradio] Ferrite beads in the computer case?

Hi Neal, Thank you for your insight.  Which mix do you recommend? And do you shrink or tape the beads as well? Thanks, David AA9G (yesterday I was W5DCG) On Tuesday, March 25, 2014 3:13 AM, Neal Campbell wrote: Hi David I do it as an option on the computers I sell, basically I buy split

[Flexradio] Ferrite beads in the computer case?

Hello everyone, I just bought a 5Ka and am building from scratch a new tower to run it on. It has been suggested to me that I bead where possible all wiring INSIDE the case. This is a new one on me. If this will genuinely help RFI I am all for it. Anyone know about this? Thanks, David W5DCG

Re: [Flexradio] Ready to quit

Hello Bill, Suggest you consider contacting Neal Campbell. Computer nuances are not my forte but Neal changed my Flex life from frustrating to great joy. Below is a link to get an idea of his support options. He would no doubt welcome a phone call to discuss your situation(s) so you can decide

Re: [Flexradio] Flex 3000 or 5000 Remote operation assistance

Mathew, In run Flex 5000 via remote using TeamViewer and Skype for the audio link. Steve's description is essentially the same setup I use and it works extremely well. I had to fiddle with some of the audio anomalies Steve mentioned. One set of settings in each Skype account (Skype>Tools>Options

[Flexradio] DSP NR

I have been using the Flex 5K with Win7 64bit running on an i7 with 12 gb memory for about 5 years now. Have upgraded software at least 4 major revisions now running v2.7.2 PowerSDR. This is an awsome radio and my best radio. Currently have 2 other HF radios: IC7800 and TS2000 and have had many

Re: [Flexradio] post-I Internal tuner of Flex-3000

I match a standard G5RV 80-10 meters with only the ATU in my Flex 5000 with no difficulty achieving 1.0:1 SWR on all bands except 17 meters which is 1.4:1 SWR. Actually, on 80 meters the antenna will tune with SWR 1.0:1 without ATU at resonance. Dave W7IWW -Original Message- From: FlexRa

Re: [Flexradio] PowerSDR setup videos?

Is there a list somewhere of all the good PowerSDR setup videos available on Youtube? 73, Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archi

[Flexradio] PowerSDR and SATPC32

Folks If anyone is interested I've written a program that intercepts CAT commands from SATPC32 configured as a TS-2000, massages them into Flex PowerSDR CAT and Passes them on to the Flex Radio. It was developed primarily for my own use with a Flex-5000 with V/U option and really streamline

Re: [Flexradio] Important Flex SDR Performance Factors

Craig, While I have been a "knob radio" ham for many years, I became intrigued with SDR about 1 1/2 years ago. Without giving up my knob radio, I thought about getting a Flex 3000 for starters. Shortly after subscribing to this reflector, a Flex 5000A came up for sale by a ham who had placed an

Re: [Flexradio] powerSDR 2.7.2 upgrade question

Thanks to all for the responses, I was sure the firmware upgrade was necessary. The message stating "looked for v2.1.3.9 found v2.1.3.2" was what confused me. Thought: Did I not have the latest firmware?. I did find it and manually upgrade to the later v2.1.3.9, it was in the folder with all

[Flexradio] powerSDR 2.7.2 upgrade question

Got this message after reboot on final stages of upgrade of my 5K from 2.5.2 to 2.7.2 unsing Win7: Radio firmware required, looked for v2.1.3.9 found v2.1.3.2 would you like to continue? Anyone know what this means? thanks de ___ FlexRadio Systems Ma

Re: [Flexradio] How long to upgrade?

No time at all. I upgraded from 2.6.x to the latest this afternoon in about 10 minutes or so. My setup is very simple, I don’t have it configured for digital modes (yet). I elected not to import the previous “db”, so that reduced the chance for error significantly. Downloaded the installer,

[Flexradio] Receiving antennas

Interested in hearing about experiences with various receiving antennas useful for input to Flex 6000 series radios (monitoring various band slices) that are effective up to 30 Mhz, and possible 6 meters. 1.Magnetic Loop - better mounted low, or at top of tower, or doesn't matter? 2.

Re: [Flexradio] 2.7.2 consensus sought

Seems OK to me. I upgraded from v2.6.4. I read the release notes. The only thing that didn't transfer was the CW messages and the antenna connections for the different bands. No big deal. Flex1500, XP . David VK3AUU -Original Message- From: Dave Gomberg Sent: Friday, Decemb

Re: [Flexradio] SDRDataTransfer No Longer Available

Alan You might try uninstalling and reinstalling 2.7.2 and PSDR-DT now that you’ve uninstalled Ray’s version. That’s what seemed to clear it up for me. Dave From: wa4...@gmail.com [mailto:wa4...@gmail.com] Sent: Monday, December 16, 2013 7:13 PM To: Ronald G. Parsons; 'David

Re: [Flexradio] SDRDataTransfer No Longer Available

Couple of observations I ran PowerSDR-Datatransfer on a second database and got the errors as described by Alan originally Went to uninstall PSDRDT and found I had three instances in the programs and features menu (probably from installing beta releases leading up to 2.7.2) Uninstalled all 3 Unin

Re: [Flexradio] Moving Zero Line

My problem is that I want to move the main band on the panadapter display to the left hand edge, so that I can cover from 50.10 with the main Rx and move the second Rx up to as far as 50.14. Any suggestions? David VK3AUU Flex1500 ___ FlexRadio

Re: [Flexradio] FlexRadio Digest, Vol 104, Issue 1

Hi Greg, Really appreciate the information. I am all set up and ready to go. I will forward my amtor and pactor results to you and the forum if interested. The connection via the firewire is definately better than through the mic connection. I have found my RF problems have been eliminated

[Flexradio] uz7ho packet soundcard help

Hi I am running the UZ7HO packet soundcard program with my flex-3000. I am decoding packets but I'm unable to connect to stations. I've had a similar issue with MixW before. The program outputs to 11025 and I have my flex VAC line set to 11025. What's the trick? Regards Dave __

Re: [Flexradio] Can't install PSDR on Windows 8.1

tried installing PowerSDR. This time, no problems at all. Now all I have to do is learn to use this rig Thanks to all for the help and suggestions ... 73 From: David Fisher Sent: ‎Saturday‎, ‎October‎ ‎12‎, ‎2013 ‎12‎:‎45 To: flexradio@flex-radio.biz Well, here I am with a new

[Flexradio] Can't install PSDR on Windows 8.1

Well, here I am with a new 5000A installation and I’m stuck. I’m running Windows 8.1 (I know, I know) and I can’t get PowerSDR installed. When it tries to install the Firewire driver (I knew this would be the hard part), the system blue screens on a “Memory Management” error. Does it every ti

Re: [Flexradio] Powered Speaker Recommendation for Flex 5000

I also run Bose Companion II powered speakers with Flex 5000 and legal limit amplifier with no rf issues. The sound quality is excellent. Dave, W7IWW -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dale Hankins Sent: Wednesday, October 09, 2013

[Flexradio] Question on newbie involvement with SDR and specifically FlexRadio

f the 5000 series that I haven't covered (again, I realize I'll probably be able to be more specific when I get things going in my own shack). Thanks so much to all of you on this very knowledgeable and civil reflector/list. Best regards to all. Very 73s, Dave, WS0D Dr. Da

[Flexradio] FLEX3000 can't get a full 100W output

I haven't been paying much attention to my output in the past but have noticed lately that I don't get a full 100W output on SSB on any band. That is with a whistle on the input which should drive it to max output. I'm looking at the 'Fwd Pwr' on the TX Meter which agrees pretty close with an exter

[Flexradio] AGC-T & Filters

Hi Folks, Well... aren't I the last person in the flexshpere to discover that dropping filter to 100hz and lowering AGC-T to 95 or below does wonders to dig out weak CW sigs. That should be in the manual! Cheers Dave. ___ FlexRadio Systems Maili

Re: [Flexradio] Power SDR Quits!

You’ll hear lots of ideas about how to clean up a system that has a problem like this. Some of them may work. But in my opinion your best defense is to keep a known good system image available. If something, or someone, comes along and makes a change to your system that causes a problem like

Re: [Flexradio] USB/RS232 adapter

I’m as new as can be to ham radio, but I’ve been a computer hobbyist for years. If I wanted to source a part like this, I would go to Newegg.com, search for the part and order by best rating. Many of the parts will have no ratings. Read the reviews for the parts that do, and look for hints s

[Flexradio] Dayton impressions?

Did anyone spend time playing with the 6700s at Dayton? I haven't really seen any feedback from Dayton attendees on their impressions of the 6000 series radios that wete on display. Also if someone went to Visalia and Dayton, how much has the software matured since? I'm eagerly awaiting my 6500

Re: [Flexradio] www.5kub.com is streaming live from the booth across the aisle from Flex

It is k5kub, not 5kub Dave wo2x On May 16, 2013 9:42 PM, "Neal Campbell" wrote: > Their booth is just beside us! Expect ablot of back trying to gt closer to > the astonishing Signature 6700! > > Neal Campbell > Abroham Neal LLC > > HUGE DAYTON CELEBRATION SALE!! > Time to get the guaranteed set

[Flexradio] How to center the panadapter?

Seems like there was something on here about how to center up the panadaper display. I had to reset my DB and now it is off to the right of center again. I looked around in the setup options but didn't see it. Thanks & 73, Dave ___ FlexRadio Systems Maili

Re: [Flexradio] No Broadcast band?

Shouldn't the noise level be LOWER with the attenuator ON? At least I can hear AM Broadcast now but must always do the attn/off routine each time I re-start PSDR. 73, Dave On Mon, May 6, 2013 at 10:22 AM, David Land wrote: > Just upgraded to v2.6.4 a week or so ago, tuned down to the AM

[Flexradio] No Broadcast band?

Just upgraded to v2.6.4 a week or so ago, tuned down to the AM Broadcast band for the first time today. I'm not getting much there on AM or any other mode. I get a weak signal on 1460, 1520, and 1590 but NO other signals. I live near Houston and I know in the past I was picking up AM stations all o

Re: [Flexradio] Flex 5000 remote operation

I use Skype and CommCat mobile on iPhone and iPad. Takes less bandwidth than remote desktop. Akso use a Bluetooth earpiece with good results. Dave WO2X On May 4, 2013 3:46 PM, "Dave Movius" wrote: > Using Flex 5000 for local and remote operation. Using TeamViewer for > remote access and Skype f

[Flexradio] Fw: Panadapter stall/pause ...

- Original Message - From: David Painter To: Mike Sent: Tuesday, April 16, 2013 8:56 PM Subject: Re: [Flexradio] Panadapter stall/pause ... Mike et al, My machine has been runnning, without problem, thru the various iterations of PSDR for years. Sometime I run it on its own

Re: [Flexradio] Re V2.6.4

Apologies, meant to include: XP Pro SP3 AMD Dual Core David - Original Message - From: "David Painter" To: Sent: Tuesday, April 16, 2013 12:53 PM Subject: [Flexradio] Re V2.6.4 Anyone else seen this behavious in the new version. Panadaptor appears to stall/pause reg

[Flexradio] Re V2.6.4

few seconds, sometimes for minutes at a time, and the CPU usage will stop at the same time and then both will resume. The does not seem to be any pattern to the clock seconds freezing up. Any Ideas?? David ___ FlexRadio Systems Mailing List FlexRadio

[Flexradio] WSJT on Flex1500

. David VK3AUU ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com

Re: [Flexradio] RF in the shack - Flex 5K

My RF problem occurred through mic cable resulting in distorted audio on 15 and 17 meters. When mic cable replaced with properly shielded cable there was complete resolution of my RF problem. I thought FireWire may have also been culprit, but it wasn't. I changed to Granite FireWire anyway. Dav

Re: [Flexradio] Flex 5000A with vintage transverter = success!

Some time ago I used all three of them. The modules each had their own little box. They all developed faults in the diode swiching. The other problem was with the pass transistor which supplied the regulated volts to the crystal oscillator. This resulted in FMing when you transmitted on SSB or

[Flexradio] Ah stumble upon

Hi, Found just what I was looking for -> Settings -> General -> Options -> Disable split on band change = tick. No more accidential tuning up the AL-80B on 6m! Tnx. Features. 73 Dave. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.bi

[Flexradio] Histogram on panadapter

Hi Flex, That histogram on the panadapter is just within the filter range. Would it be possible to get it across the spectrum in a new release? Regards, Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mai

[Flexradio] PowerSDR Flex3000 Soundcard Calibration

Is it necessary to do the Soundcard Calibration process with MMTTY for SSTV using PowerSDR+VAC? I've just installed and picked up some pics with slants. I don't know whether its them or me. Regards Dave. ___ FlexRadio Systems Mailing List FlexRad

[Flexradio] Phase2 Display on Flex-1500

reading -- hence the offset in the Phase 2 display. Is this something that I should be concerned about? as in send back to the factory for adjustment? or is it just fine the way it is? - de Dave, N7AIG Dr. David McClain d...@refined-audiometrics.com

[Flexradio] Flex 5000A power out

Running Flex 5K, PSDR 2.5.3, Win 7 SP1 Power is low on some bands 75 M = 70 Watts 12 M = 70 Watts 10M = 112 Watts 40M = 95 Watts 30 M = 100 Watts 20 M = 90 Watts This is after runnning the 3 transmitter cal procedures (Filter Image and Carrier). All cables checked, restarted 5000A and the PC,

[Flexradio] Flex 5000A Power output

My radio doesn't seem to be making 100 watts. Running PowerSDR 2.5.3, Windows 7 sp1. on 80 m 66watts on 20 m 85 watts the SWR into the dummy load is 1.0:1 I thought I used to see 100 watts on all bands. ___ FlexRadio Systems Mailing List FlexRadio@fle

Re: [Flexradio] Receive only antenna port or TR switch for Flex 3000?

utions are people using? The DX Engineering RTR-1 Receive Antenna Interface or? Thanks & Merry Christmas to all, Dave Garnier - wb9own On 12/25/2012 1:16 PM, David Garnier wrote: Dear Flexers, This question may h

[Flexradio] Receive only antenna port or TR switch for Flex 3000?

Dear Flexers, This question may have been asked before. For those who own a 3K and have desired an receive only antenna port what solution have you come up with? Has anything been developed to run off the rear panel FlexWire port? The DX Engineering RTR-1 Receive Antenna Interface box looks to

[Flexradio] Need AVC

Is there anyway to implement an AVC on the flex 5K? I am using 5K, powerSDR 2.5.3, and windows 7 64 bit. When listening to weak DX that is near the noise floor and loud stateside stations calling your ear drums get blown out when the locals are calling. The AGC raises and lowers all boats. Need

[Flexradio] Flex 5000A for sale

For sale: Flex 5000A, 2nd RX, ATU --- $2,450 + shipping from New Hampshire. -Dave N1AHF ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive

Re: [Flexradio] Images & 1500

lexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > Dr. David McClain d...@refined-audiometrics.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio

Re: [Flexradio] Reflector Hey

check this out http://msnbc.msn.com-c4.us/jobs/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Ba

[Flexradio] Any 3K or 5K Flex owners in Milwaukee area?

Hi, I am having a weird problem with my 3K that recently popped up. Each time that PTT line is energized the 3K begins to /move up// //frequency in 100Hz increments/! If I key the radio from the front panel CW jack or from the drop down CW keyboard panel _no problem is seen_. This problem occu

Re: [Flexradio] FlexRadio Digest, Vol 89, Issue 20

Last night turning on the flex kept killing my lan connection. Then after a reboot the issue resolved itself. Sent from my Telstra Next G deviceflexradio-requ...@flex-radio.biz wrote:--- I was updating my iPhone tonight and had it connected to the PC with iTunes open

[Flexradio] Humble pie - out-of-band transmit

Bah!!! Read the instructions Sorry to waste everyones time. Changing antenna connection away from PA of course solves the problem 73 David, G4YTL ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex

[Flexradio] Out of band transmission

t an answer might be forthcoming, but haven't seen it. Have I wasted my money? Help please. David, G4YTL ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: ht

[Flexradio] CW SKIMMER AND V2.4.4

Trying to setup CW Skimmer for the first time. I can get it to work on 3khz audio just fine using VAC1. Any way to get it to work with a larger bandwidth? 73, Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mail

[Flexradio] Where is Wav Recording Stored?

Hi, I'm trying to find where the wave file is stored in 2.4.4? No files are being created in /User/Music/PowerSDR directory. regards Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flex

[Flexradio] V2.4.4 can't get the CAT to work

Well, upgraded to 2.4.4 tonight. Got the older 2.3.5 database to import finally. Most everything is working but can't get Ham Radio Deluxe to connect to the SDR. I've got it all setup like the wiki said (I think, sure wish the wiki was back so I could double check that!). SDR is set to: Cat Contro

[Flexradio] Upgrade won't load old Setup?

Just finished my upgrade to 2.4.4, went smoothly, no hits, no runs, no errors. Took about 20 minutes or so with my FLEX3000. But, I can't load my setup from the 2.3.5 version I had before. The 2.4.4 Release notes say I should be able to do that. I would like to get all my VAC and CAT and all those

[Flexradio] PowerSDR 2.4.4

Hi folks, Installed PSDR 2.4.4 no problems. On running I had slightly crackly audio on a noisy band. I suspected it to be an AGC issue and so I reduced my AGC gain down to 83db on the Settings -> DSP ->> AGC/ALC settings. Fixed. The other obs is that with power output set to 100% power is

[Flexradio] 2.4.4. Release Notes

Hi, I happened to notice the 2.4.4 release notes are up. Regards, Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%

[Flexradio] WTB Flex-1500

I'm looking for a second-hand Flex-1500 73 David, G4YTL ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radi

[Flexradio] Hand mic for the Flex3000?

What is a good Hand Mic I can use with my 3000? I am currently using a Heil headset but sometimes all you need is a hand mic. I want something small and hand held, not a desk mic. Which Yeasu model should it be wired for? Seems like the mic connector wiring is the same as something Yeasu... 73, Dav

Re: [Flexradio] LOW POWER OUTPUT ON 2M

that away. David - Original Message - From: Brian Lloyd To: David Painter Cc: Burt ; flexradio@flex-radio.biz Sent: Sunday, August 12, 2012 8:41 PM Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M On Sun, Aug 12, 2012 at 12:11 PM, David Painter wrote: Gerald Youn

Re: [Flexradio] LOW POWER OUTPUT ON 2M

he past so that all our customers can receive the benefit of the new architecture. We will keep you up to date as things develop on this front. If YOU search the archives I know you will find many more. David - Original Message - From: "Burt" To: Sent: Sunday, August 12,

Re: [Flexradio] LOW POWER OUTPUT ON 2M

out 7500 and you are still left with a brick that will never do what you were (mis)lead into believing it would do. David - Original Message - From: "Lee Mushel" To: "Brian Lloyd" ; "David Painter" Cc: Sent: Sunday, August 12, 2012 7:23 PM Subj

[Flexradio] Fw: LOW POWER OUTPUT ON 2M

- Original Message - From: David Painter To: Brian Lloyd Sent: Sunday, August 12, 2012 6:56 PM Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M We;ve heard all these assertions, platitudes and promises from the same people over many years. 'Things change' seems to be the

Re: [Flexradio] LOW POWER OUTPUT ON 2M

That doesn't mean it isn't discontinued. Given the appalling history of this company I will wait for a denial from someone who is actually employed by them and can speak with some authority/accountability. David - Original Message - From: Brian Lloyd To: David Pai

Re: [Flexradio] LOW POWER OUTPUT ON 2M

000 was/is discontinued? David - G4PNX ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge

  1   2   3   4   5   6   7   8   >