I have tried several computers st home and work and it looks like the
website is down
Dennis KM6DF
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
I have a 5000A, PSDR ver 2.5.3.
No matter what band I tune, the TX window says out of band. And I see no sig
on display when I Xmit cw. ( I do see usb sig)
Any ideas on how to remedy?
Tnx
Dennis WA9FBC
___
FlexRadio Systems Mailing List
Remove from list
Dennis Jones
k6...@cox.net
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
Thanks Burt, I had not seen that video before, except for the background
noise it was really great
73
Dennis KØEOO
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Burt
Sent: Sunday, February 03, 2013 7:02 AM
To: flexradio@flex-radio.biz
On 10 15m the tuning seems backward(20m below is ok on my 5000)) there
are blips that have no audio disappear when I click on them.
Are these images? I have not seem them before. How do I get rid of them?
Dennis
WA9FBC
___
FlexRadio Systems
Hi
I am setting up VAC Vcom to run JT65.
When I click Enable PTT in the CAT Control window, the xmtr keys!stays
keyed. I do not have to push test.
I am in DigU mode. I am using com16
Any ideas to get it working correctly.
I am using PowerSDRv1.18.5
Thanks,
WA9FBC
Dennis
Which mic should I get. It needs to be plug ready as I do not have solder gun
yet.
Thanks
Dennis
WA9FBC/6
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
thought of going to one of the big box radios but no joy, none of
them have the real time panadapter and so on
Have fun with what ever you choose buy the way I have a 6500 on
order
Dennis KØEOO
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz
Is there a way to scan the memories hold for various times.
Den
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
are current. I tried disabling my virus checking software. I'm not smart
enough on this to know what to look for next.
Thanks,
Dennis NT0V
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
that on the 6700, each SCU has
4 options for receive antennas (SCU-1 would use RX ANT A-In, SCU-2 would use
RX ANT B-In).
Eric Wachsmann
FlexRadio Systems
73s
Dennis KØEOO
_
From: Eric Wachsmann [mailto:e...@flex-radio.com]
Sent: Tuesday, May 22, 2012 12:59 PM
To: radio
I looked around the Flex web site but did not find any thing about out of
band MARS operation. How does a active MARS member get his Flex on the
MARS frequency's???
--
Dennis N5DPK /NNN0HMT
Lake Hawkins TX
Wood County
TX Traders Net 3870 LSB Friday Night 7:30 PM CST
TX Traders Net 7245 LSB
in VAC control brecause
the other settings lock things up.
Dennis
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
ear's.
If you have a Fred's nearby take a look, it is worth the trip.
Dennis N5DPK
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
Flex 1000. Less noise from the monitor sure would make me happy! Any
thoughts???
Dennis n5dpk
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
On 10/29/2011 11:54 PM, Dennis Kippa wrote:
What voltage wall wort can I use on a FA 66. My Dell supports 4 wire
so I cannot use the voltage bus provides by the 6 wire. I just got a
SDR 1000 and I am going through the setup.
Dennis n5dpk
Thanks for the help everyone. Junk box contained
What voltage wall wort can I use on a FA 66. My Dell supports 4 wire so I
cannot use the voltage bus provides by the 6 wire. I just got a SDR 1000
and I am going through the setup.
Dennis n5dpk
___
FlexRadio Systems Mailing List
FlexRadio@flex
,
DDUtil will not know what to do and start assigning incorrect port addresses
for you.
Other than this issue I have never had DDUtil not remember the correct port.
73's, Dennis k0eoo
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz
,
Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com
Sorry to bother the group, I solved the problem, I had the multiRX
slider/fader all the way to the right which seems to turn the scope off.
All is well now
Dennis, k0eoo
-Original Message-
From: Dennis Petrich [mailto:radio...@frontiernet.net]
Sent: Wednesday, April 27, 2011 7:41 PM
and all the latest updates and latest
Flex firmware.
All help would be appreciated.
Dennis k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
it's being keyed on and off so the
motor-boating is not a modulation but the carrier being keyed on and off
All help and suggestions are welcome except selling my 5000A.
Regards, Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex
Additional information:
My radio is the 5000A and I notice the BW is too wide only on the main RX
and not the 2nd RX CW bandwidth is OK on 2nd RX???
Dennis
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dennis
Understand the issue with shape factor and expanded sample rate but the
issue does not happen on the 2nd receiver as I just found out..
Dennis, k0eoo
_
From: Bob McGwier [mailto:n...@flex-radio.com]
Sent: Saturday, April 23, 2011 11:33 AM
To: Dennis Petrich
Cc: FlexRadio
Gerald,
Thank you, changing the flex wire driver buffer from 1024 to 2048 fixed the
problem!!
_
From: ger...@flex-radio.com [mailto:ger...@flex-radio.com] On Behalf Of
Gerald Youngblood
Sent: Saturday, April 23, 2011 5:38 PM
To: Dennis Petrich
Cc: FlexRadio Reflector
Subject: Re
That was it Tim.
Duh!I forgot I had tinkered with the USB setting. It seemed ok at first at a
more aggressive setting but then it all went sideways the next time I fired
it up, the next day. Working fine now at 512kb setting in the audio buffer
and mildly conservative setting on USB.
Dennis
Can anyone help me get to the diversity control panel shown in W9OY's
video??
Thanks, Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
for your hard work on this
latest major update!!
Sincerely,
Dennis, k0eoo
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Gerald Youngblood
Sent: Monday, March 28, 2011 5:16 PM
To: Reflector
Subject: [Flexradio] Announcing
1024 for audio buffer size on all other versions of the software with
great results till now. Otherwise everything else is great and functionally
this is the best so far!!
If it ain’t broke, we aren’t having any fun yet!!!
73,
Dennis G. Deaton
KG7UY
All my settings were for normal font size so that's not it. I'll get back
in here when I get a screen shot of what I'm talking about.
Dennis, k0eoo
-Original Message-
From: Larry Otto [mailto:w...@embarqmail.com]
Sent: Wednesday, March 30, 2011 8:58 AM
To: radio...@frontiernet.net
no
gain!
KG7UY
Dennis G. Deaton
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
be a problem in the hardware (what there is of it). I have
used it extensively on 75-80 ssb with good results. The new PowerSDR is is MUCH
better and much appreciated.
Any thoughts??
Dennis G. Deaton
KG7UY
___
FlexRadio Systems Mailing List
FlexRadio
Thanks for the help but I have tried to reset the data base for the 1500 but
with no luck. I also tried deleting the software off of my computer and
reloading latest version 2.0.8 again no luck any suggestions
Thanks
Dennis Daniel KM6DF
___
FlexRadio
I just noticed that I have ether low or no tx power on 40 meters all other
bands are working fine. I have chacked all of my setting and they all look like
they are all set right. is their a fix for this or a setting I may be missing
Dennis
KM6DF
Cool,
I ordered mine at SeaPac in early June so the excitement is building while
waiting for the ship date confirmation!!!
Dennis
KG7UY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
Hi-
Using a Neal computer with my new 5000A--FB rig!
PSDR v 1.18.5
This list will be very helpful --I can tell.
I saw on the W9OY blog that he had a BLACK background--how do I set that on
mine? Did I miss it under appearance?
Dennis
WA9FBC
Chicago IL
I've noticed the same issue Jim. If you move the AGC to FAST it comes back
repeatable.
Dennis, k0eoo
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Barber
Sent: Sunday, November 29, 2009 5:10 PM
To: Jordan
Cc
Well put Harry
Dennis k0eoo
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Harry Williams
Sent: Sunday, November 29, 2009 6:33 PM
To: audio...@charter.net; outposte...@shaw.ca
Cc: flexradio@flex-radio.biz
Subject: Re
Thanks Dudley, those setting work lots better, especially on CW... Flex
should make those the defaults.
Dennis, k0eoo
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dudley Hurry
Sent: Sunday, October 25, 2009 10:49 PM
in the
back) and it doesn't work any more? I tried the Flex by it self with the
other programs off and still no joy. I shutdown the flex and restarted
everything and still no joy? I verifyed the PTT switch was working. At
this point I could use a fresh idea?
Thanks in advance, Dennis, k0eoo
The phono plug at the end of my foot switch cable was not making good
contact to the Flex PTT jack, issue solved
Thanks, Dennis, k0eoo
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Dennis Petrich radio...@frontiernet.net; flexradio@flex-radio.biz
Sent: Saturday
I agree, I have been using NOD32 with my SDR1k with NO issues
Dennis, k0eoo
- Original Message -
From: Neal Campbell nealk...@gmail.com
To: Steven O'Neal se_on...@hotmail.com
Cc: Flex flexradio@flex-radio.biz
Sent: Saturday, July 11, 2009 10:08 AM
Subject: Re: [Flexradio] Venting
I agree with Ed's comments, I'm looking at a 5k but it bothers me that I
will need to add a 6m preamp!!
Thats my only issue, otherwise I think the Felx is a really exellent radio!!
Congrats to all the hard work from the Flex engineers!
Dennis, k0eoo
- Original Message -
From: Ed
Don't get me wrong guys, I really like the Flex too and will probably just
go the external 6m preamp like you-all and be done with it
Dennis, k0eoo
- Original Message -
From: Bob McGwier rwmcgw...@gmail.com
To: flex radio FlexRadio@flex-radio.biz
Sent: Saturday, June 27, 2009 9
Thanks for the input Larry, that puts it into perspective; which helps
Dennis, k0eoo
- Original Message -
From: Larry Savage sava...@hotmail.com
To: Flex List flexradio@flex-radio.biz
Sent: Saturday, June 27, 2009 10:50 AM
Subject: [Flexradio] Why a 6Meter Preamp Is Needed
getting our of SDR or ham
radio. I will send pictures on request. Would like $850 bucks for the
package plus shipping
Interested parties please respond off reflector, thanks
73's
Dennis, k0eoo
k0...@arrl.net
__ Information from ESET NOD32 Antivirus, version of virus signature
. Not as
bad as I thought it would be
Dennis, k0eoo
- Original Message -
From: Jesse N4BFD n4b...@gmail.com
Cc: FlexRadio List flexradio@flex-radio.biz
Sent: Wednesday, June 17, 2009 8:19 PM
Subject: Re: [Flexradio] 6 meters hot tonight
Yup, several CW and SSB QSOs on six being heard
Hello all,
I am asking for some guidance from someone who has put their SDR-1000 on 6m.
I would like to know what RX preamp I need and what TX amp you would
recommend and how you hooked them up. Thanks in advance for your help.
Ciao, Dennis, k0eoo
__ Information from ESET NOD32
My neighbor had a bad computer supply that wiped out 40 and 20m Took me
over a year to figure it out. When I got him to shut it off all was better.
He replaced the supply at his own expense and appologized for causing me the
noise problem. It pays to talk to your neighbors.
-
I would upgrade to a Flex5000 just to get Diversity
Keep up the great work guys.
73, Dennis, k0eoo
- Original Message -
From: Bob McGwier rwmcgw...@gmail.com
To: Lee A Crocker lee_croc...@yahoo.com
Cc: Flexradio FlexRadio@flex-radio.biz
Sent: Tuesday, May 05, 2009 6:58 PM
to their
characteristic Z.
Dennis, k0eoo
Ray Andrews k9...@rnacs.com wrote:
Chris,
The published loss spec for RG-11/U is 2dB/100' @ 100 MHz. This means that
at 100 MHz, the loss in a 5' run would be 0.1 dB. At frequencies below 30
MHz, the loss in a 5' run would be TOTALLY insignificant.
73
Dennis, k0eoo
y...@aol.com wrote:
Here is the story,I sold my perfect sdr-1000 ,with the fa-66 sound
card,and all cables,He hooks everything up as I had instructed him to
do. He added a parrall port to his computer ,as he didn't have one and
a firewire card to connect the fa-66
It seems that wikipedia agrees with my understanding of the Roofing Filter
which is a narrow filter between 6 and 20KHz.
Well there you have it Brian
Ciao, Dennis, k0eoo
http://en.wikipedia.org/wiki/Roofing_filter
Brian Lloyd brian-wb6...@lloyd.com wrote:
On Tue, Jan 27, 2009 at 5
I agree Rob,
My only issue all a long was the naming convention, calling any bandwidth
filter in front of the A/D a roofing filter, that's all Its certainly not
important and not worth any more e-space; so that's that as they say
Regards, Dennis, k0eoo
Rob Sherwood r
the newer rice boxes But not against the
Flex.
Regards, Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
Funny man
Tim Ellison [EMAIL PROTECTED] wrote:
...After all, that is a lot of power to give up to heat
This is otherwise known as the FLEX-5000 Warming Oven Upgrade. Another
innovative first from FlexRadio Systems. Just pop the top cover off of the
FLEX-5000 and insert you
Thanks Eric,
Yes, that would be a very good widget. I know your working a big list but this
is the only issue I have with 1.14.0, very nice package...
Ciao, Dennis, k0eoo
Eric Wachsmann [EMAIL PROTECTED] wrote:
The scope is currently being processed from the post-processed audio
it covers up the
panadapter display. The AGC-T control will lower the scope gain but it cuts
the receiver gain too much. So what am I missing??
Thanks in advance for any help.
Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
PowerSDR software has got some really great features.
Again, Thanks, Dennis, k0eoo
Dudley Hurry [EMAIL PROTECTED] wrote:
Don,
Using VAC, you use the VAC TX Gain to regulate your output, if you are
using the conventional method of physical cables to and from the
computer sound card
Thanks for making the changes Dave I saw your post last night and was
able to download your latest MMTTY code with the VAC support I needed. Got
it working with Ham Scope and was able to do RTTY for the first time with my
SDR1k Ham Scope.
Thanks again!
Dennis, k0eoo
- Original
This is true for me too
Dennis, k0eoo
- Original Message -
From: Gerd Loch [EMAIL PROTECTED]
To: 'Dudley Hurry' [EMAIL PROTECTED]; [EMAIL PROTECTED]
Cc: 'FlexRadio biz' flexradio@flex-radio.biz
Sent: Tuesday, August 05, 2008 3:53 AM
Subject: Re: [Flexradio] SDR-1000 PowerSDR
Isn't that the same split display feature that's in the Power SDR 1.10.4
that I'm using today with my SDR1000?
- Original Message -
From: Eric Wachsmann [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
Sent: Friday, August 01, 2008 2:19 PM
Subject: Re: [Flexradio]
I thought the NB1 and NB2 worked on AM? You mean they don't? AM is one of
my most favorite modes. I'd like to know the scoop
Dennis, k0eoo
- Original Message -
From: BILL GUYGER [EMAIL PROTECTED]
To: Mike Monnier [EMAIL PROTECTED]; FlexRadio@flex-radio.biz
Sent: Saturday, July
Impressive, can you point me to some description of what VR code is? I have
the SDR-1000.
Thanks, Dennis, k0eoo
- Original Message -
From: Tim Ellison (W4TME) [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
Sent: Saturday, July 26, 2008 12:34 PM
Subject: Re
? Hope this isn't one of those catch 22's?
Thanks in advance for your help, Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
very much, Dennis, k0eoo
- Original Message -
From: Ray, K9DUR [EMAIL PROTECTED]
To: 'Dennis Petrich' [EMAIL PROTECTED]; flexradio@flex-radio.biz
Sent: Saturday, July 05, 2008 12:48 PM
Subject: RE: [Flexradio] How to PTT in Digital modes?
Dennis,
Most sound card interfaces have
Hello all,
You guys won't believe this but I'm hearing a voice when I'm in PSK31 mode
using he Hamscope software with my SDR-1000/FA-66 combo... I'm using the vCOM
to PTT the rig and VAC to get the audio to/from the SDR. Everything seems to
be working just great in receive and all other
Thanks Neal for giving me the second option because I cant afford the first,
hi, hi. Well I did purchase the VAC software, I just haven't uninstalled
the demo ware and installed the purchased version yet. Glad to hear thats
all I have to do...
Thanks for the help.
Dennis, k0eoo
the Hamscope or other Digital
mode
programs???
Thanks in advance for any help.
Dennis, k0eoo
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
I see this rather often when I first start up with my Dell P4 and I am using
the firewire interface with a Firebox rather than the parallel port. If it
happens, I click to Standby and back to On once or twice and it stays solid
after that. I've never seen it happen on transmit.
Dennis NT0V
70 matches
Mail list logo