database to the new computer and then performing a database
import upon completion of the install of the driver and PowerSDR on
the new computer?On a similar note, would this be the best way to
maintain a backup of the unique settings? Thanks. Bill, AB4BJ
I've read that a number of you have had success with Win7 64 bit and
the Flex Drivers and PowerSDR. Is the Flex driver a signed 64 bit
driver? If not, how does it work under Win7 64 bit? I'm thinking
about updating the computer but wanted to clarify this before I decide
how to configure
-3000. If so,
then it is probably a settings issue as opposed to the cable. By the way, I
have also tried this with DDUTIL which has nicely interfaced the Flex-3000
with HRD and my AC Log program, but I still can't seem to get the SteppIR to
follow the radio frequency.
Thanks and 73,
(as is the case for the F5k
excluding its 2.4 kHz spur).
73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.bi
e noise floor.
73, Bill W4ZV
W8JI measured data from http://www.w8ji.com/receiving.htm
My local wintertime 350Hz BW noise (after amplifier) compared to a
sample of signals on one night was:
Noise -127dBm
9H1BM -122dBm
OM0WR -95dBm
DF2PY -88dBm
WA8OLN
l suffering the effects of stone-walling
complaints about key clicks for nearly 15 years before they did
anything to address the problem. I'm very happy to know Flex is not
making that mistake.
73, Bill W4ZV
___
FlexRadio Systems Mailing L
d to move to am apartment.
So, knowing John, I am sure he will keep busy.
73 to W5GI, ES CU on the bands.
Bill Tynan, W3XO/5
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio
This seems very unfair to Juan. Juan in no way solicited the generosity
that poured forth nor
did he offer the description of himself that lead to it.He placed a
simple WTB post which
the moderator said was an OK use of the reflector.
73 de Bill WB0VHW
- Original Message -
From
I know a $3856 package was offered for 25% offand was turned
down..factory lab tested and certified just two weeks ago..??? You
Figure
-Bill
Guess he looking for a total give away...or?
- Original Message -
From: "Dave Gomberg"
To: "K4LCD"
like each other...so both have their own computer now...
-Bill
- Original Message -
From: "AB2CD"
To:
Sent: Monday, July 13, 2009 4:53 AM
Subject: [Flexradio] Input
Hi everyone,
I am told that my 5000A should ship this week and I am very excited about
its arrival. I
it to behave
and download the needed software, I don't remember, but was able to do it.
Now, I'm sitting 50.106, looking for Dennis at 5J0BV, I did work XE1GRR a
little while ago so, things are open in the right direction..
73,
Bill Tyn
A big thanks to John! It's always been a pleasure dealing with Mr. B. I've got
a 1000 and a 5000 and I've built his Magical Miracle Mystery Antenna. Works
pretty well I might add. OK I made up the magical and miracle part...
Bill AD5OL
- Original Message
From: Ge
on my site to get an ideayou'll see a number of "Black
box's" I replaced in favor of the Motu and a computer/software
-Bill
http://www.kc4pe.com/amateurshack.htm
- Original Message -
From: "AB2CD"
To:
Sent: Wednesday, July 01, 2009 8:0
You can always steal the one off your wife's sewing machine and run like hell,
assuming you have a wife and that she can sew....
Bill AD5OL
- Original Message
From: Jesse N4BFD
Cc: FlexRadioReflector
Sent: Tuesday, June 30, 2009 3:03:44 PM
Subject: Re: [Flexradio] PTT s
rd and was wondering if anyone is running it
on XP Pro?
I read the KB on Firewire cards and know VIA cards are the cheap ones, but will
it work?
My PC is a core2duo @ 2.66GHz with 2Gb of ram on a Intel DP35DP motherboard.
TNX de Bill K2rig
Fists #2016
NJQRP #068
NAQCC #3729
SKCC #5469
http://mysite.v
that
fixes the problem.
Otherwise happy with my Flex 5K which I've had for almost two years.
73,
Bill Tynan, W3XO/5
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio
N4PY2" http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
and really like the idea of being able to access my station
from anywhere I can get on the Internet.
Your assistance is greatly appreciated
Bill Gipps
VE7XS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
Well.the 5K is sorta cubical. Anyone remember the Bill Cosby Noah
routine?
Bill AD5OL
- Original Message
From: FireBrick
To: FlexRadio List
Sent: Friday, June 19, 2009 6:45:24 PM
Subject: [Flexradio] 2nd round of storms moving in
don't worry, I left the Flex on
W9DR's tests are very interesting. I have a 3K and am using an ARR preamp.
BTW, Dave, TNX for the screen shot. I was surprised how good I looked. Some
guy in FL a few days later told me I was broad. From what you sent me, I
knew better
73,
Bill Tynan, W
on on the survey. I doubt it will bring peace
to the Middle East or stop global warming or cure the Swine Flu, but hey.
it might.
Bill AD5OL
- Original Message
From: Jim Jerzycke
To: flexradio@flex-radio.biz; Duane - N9DG
Sent: Tuesday, June 16, 2009 10:21:48 AM
Subjec
Vista 32 will only recognize 4Gb total system memory, that includes video
memory'
Bill K2rig
Fists #2016
NJQRP #068
NAQCC #3729
SKCC #5469
http://mysite.verizon.net/k2rig/
> From: stor...@cableone.net
> To: FlexRadio@flex-radio.biz
> Date: Fri, 29 May 2009 11:29:03 -
I just ran the test here and observe no such behavior. I am running PSDR
Version 1.16.2.
CU on 6
73,
Bill Tynan, W3XO/5
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
o way is
enough to drive tower-mounted transverters
73,
Bill, W3XO/5
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%4
ented in hardware solely to protect a proprietary codec.
Just one ham's opinion.
Cheers,
Bill (kd5tfd)
At 07:55 PM 6/1/2009, Woodrick, Ed wrote:
But it doesn't preclude the use of D-STAR. (and there is D-STAR data
without voice)
There's a number of efforts where the AMBE chip
PowerSDR software is supposed to recognize Kenwood CAT commands. Does
anyone operate or know if it is possible to remote operate PowerSDR via
Kenwood SkyCommand VHF/UHF radios?
Bill, AB7AA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
from getting on air.
Welcome to the modern age! I personally think technology reached its peak with
the invention of the fork and has been going down hill ever since.
Bill AD5OL
- Original Message
From: Dudley Hurry
To: Dave Gomberg
Cc: Jim Menefee ; FlexRadio@flex-radio.biz
set up...Am now using a Electro Voice RE20 microphone, into a Motu828 MKIII
Preamplifier, then Firewire into a computer where Neundo and plugins provide
the EQ etc.
It all my be a little extreme, but the Flex 5000A is an extremely good radio
system!!
Good Luck..
-Bill
kc...@mind
Amen onus and Antec. I just built a PC for my 5K with an Asus P5Q mobo and Anec
P.S. and case. The case has a wire management area, and plenty of tie downs for
the active cabling plus space for extra in addition to the two that are
standard with the case.
Bill
I have to second Bob's statement. Going into my Pit Bill mode, and speaking as
an increasingly crotchety old broadcast engineer, the only reason anybody I
know of has been able to come up with for the consortium that holds the license
for the process to be pushing HD Radio onto the publ
It would seem unlikely (at least in the near future) as the wave
forms used are proprietary.
Regards,
Bill (kd5tfd)
At 06:51 PM 3/25/2009, Jerry Harley wrote:
Are we going to be able to listen to HD radio on our Flex in the future
managing the list at
flexradio-ow...@flex-radio.biz
When replying, please edit your Subject line so it is more specific
than "Re: Contents of FlexRadio digest..."
Today's Topics:
1. Re: Missing Q codes (BILL GUYGER)
2. Re: Novice Issues with 5000A (jkelly)
3. Re: O
One I've always liked:
QTP = I've got to go relieve myself.
Bill AD5OL
- Original Message
From: Kirk K6KAR
To: flexradio@flex-radio.biz
Sent: Saturday, February 21, 2009 10:51:53 AM
Subject: [Flexradio] Missing Q codes
QKB 0
The Missing Q signals
Original List by
to control a tuner on each one?
Thanks,
Bill - W4RVN
Ray Andrews wrote:
Bill,
The MFJ-998 is an automatic antenna tuner. If you set the FLEX-5000
internal tuner to BYP (Bypass), then clicking on TUN will cause the
FLEX-5000 (or SDR-1000 for that matter) to transmit a carrier at the tune
Is there any provision in the hardware or software in the Flex-5000 to
support an external tuner such as the MFJ-998 and similar?
Thanks,
Bill - W4RVN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
ed.
Maybe you've got some version mismatch going on?
Regards,
Bill (kd5tfd)
At 09:06 PM 2/4/2009, Paul Shaffer wrote:
This is a dual boot computer, and xp is working with sdr1000. Vista has the
same libusb software as on xp, and is not working.
If you could run the program "testlib
actual hardware problem - eg. is it know to
work on an XP computer? We've got a fair number of folks running
this driver with Ozy so I think at least for our purposes liusb on
Vista 32 is working.
Hope some of this helps.
Cheers,
Bill (kd5tfd)
At 04:30 PM 2/4/2009, Sami Aintila wrote:
he Flex adapter.
Regards,
Bill (kd5tfd)
At 02:54 PM 2/4/2009, Dudley Hurry wrote:
Paul,
As far as I know, there will never be a Vista USBIO driver for the
USB adapter, XP will be as far as it goes.Next suggestion is to
get either a PCI card or a PCMCIA parallel card for the
laptops
I send balanced audio along with +/- 15V. audio power and
+12 V. logic power down VGA cables to the desk boxes in front of the Play by
Play and Color guys that have their mic-pre / line driver and headphone amps in
them.
Bill AD5OL
From: "Lux, James P
you could build a 1/ 4" TRS to 1 / 4" TRS jumper
cable and go into the balanced input jack and be ok.
Bill AD5OL
From: Chris seeber
To: flexradio@flex-radio.biz
Sent: Tuesday, January 27, 2009 7:53:51 PM
Subject: [Flexradio] Balanced vs. unbalanced
the fly. I probably
won't need a load of possible events, since a lot of them will be cyclical, but
I suppose if 8 lines are available on the parallel port 256 would be the upper
limit which would be more than enough (+/- 3 dB).
Many thanks! Please reply off list. Now I'm going to go play
To quote Robert Heinlein (I think) "Technology reached its height with the
invention of the fork and has been growing decadent ever since". One might also
read Aurthur C. Clarke's story Superiority.
Of course none of this applies to SDR.
Bill AD5OL
- O
e's a recent experience I had:
http://lists.contesting.com/_rfi/2008-10/msg00076.html
...and the original info below by John W0UN from 10 year ago.
73, Bill W4ZV
RE: Computer RFI
Here is my old post and a reply from K6NA taken from
the archives from 1998.
Guess it is still applicable.
73-
V. to 48 V. will work just
fine. 48 V was the old professonal standard, but the 15 V audio power supply
rail in any preamp or mixer works just peachie.
Bill AD5OL
From: "vtnn...@comcast.net"
To: Flex Radio
Sent: Sunday, December 14, 2008 4:09:47 PM
Hello,
I have other digital devices such as a Harris preselector that require 14
digit BCD to tune. Could this box be made to provide this digital output
based on receive VFO?
Bill, ab7aa
___
FlexRadio Systems Mailing List
FlexRadio@flex
many others) LOGic8 shines in its
contesting and award ability, HRD in its radio control abilities. I do not
do enough contesting or award chasing to justify the headaches I was having
with LOGic8 connectivity.
73 de Bill WB0VHW
Hi,
I've been reading this reflector for the last coupl
floor. If I disconnect the antenna the birdies go away. It is possible these
birdies were present before I put in the newest RFIO board but I never
noticed them.
Has anyone else seen this particular phenomenon?
Best Regards,
Bill Bailey AE6EQ
Tim,
That was it. I'm now running SVN 2410. I am back to having FUN again !!
Thank You again.
Bill w2bad
PS: Real Radios can have 1 USB knob.
Tim Ellison wrote:
> Refer to the following KB article.
>
> Trunks, Branches and Tags - Oh My!
> http://kb.flex-radio.com/article.aspx
says the correct 1.12.1. SVN 2408...so I thing I'm running
the correct version.
I could not find the added display features. I know it must be me but I
cannot figure
what I am doing wrong...
Any help would be appreciated.
Thank You in advance.
73's
-
FYI - http://electronicdesign.com/Articles/Print.cfm?ArticleID=19439
Some nice words on SDR, Flex and the 5000.
Regards,
Bill (kd5tfd)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
a 1/4" "y" also known as a "twofer" and
put a 1/4" male to 1/8" female in one side.
Bill AD5OL
- Original Message
From: FireBrick <[EMAIL PROTECTED]>
To: FlexRadio List
Sent: Saturday, August 2, 2008 5:17:08 PM
Subject: [Flexradio] slightly of
Amen brother. I live in a noisy neighborhood and would love to be able to fish
out AM signals on 80 and 160.
Bill AD5OL
- Original Message
From: Mike Monnier <[EMAIL PROTECTED]>
To: FlexRadio@flex-radio.biz
Sent: Saturday, July 26, 2008 11:27:04 AM
Subject: [Flexradio] AM
On Fri, Jul 25, 2008 at 9:34 AM, Bill Ockert <[EMAIL PROTECTED]> wrote:
Actually they have said they will do just that. Quoting from the Flex-5000
Owners Manual Version 1.10.3, caption under Table 4 on Page 9 "Table 4 above
shows the FlexWire connector pin-out. Complete spe
if so in what kind
of time frame can we hope to see the specification?
73 de Bill WB0VHW
-Original Message-
From: Jim Lux [mailto:[EMAIL PROTECTED]
Sent: Friday, July 25, 2008 11:56 AM
To: [EMAIL PROTECTED]; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flexwire
At 09:34 AM 7/25/2008, Bil
I normally do not enter into religious discussions. However...
> I believe that this is precisely the situation... Flex hasn't said
> they'll publish the interface spec.
Actually they have said they will do just that. Quoting from the Flex-5000
Owners Manual Version 1.10.3, caption under T
because that's what Amateur Radio is all about
Harrah for a job well done, to all
-Bill Winkis
KC4PE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archi
him and now I bear that nickname with
pride."
http://lists.contesting.com/pipermail/topband/2008-July/028717.html
73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://m
any problems
using a Logikey K-1, so it may also be a function of the keyer. I do
treat my contacts once annually with Caig De-Oxit just as a precaution.
73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadi
ange of SDR technology, (e.g.
N8VB's QS-1R), you may have unrealistic expectations that
*any* platform today will still be viable in 5 years!
73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadio@flex-rad
Has anyone observed that RX2 band selection does not seem to work properly
or at all whenever RX1 is set to a VHF+ transverter?
73,
Bill Bailey AE6EQ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
a." I had to tell
him that the brass had to be certified to equal Fedral Specification QQ-B-xyz
and that the brass that his cousin used to make tourist dodads probably
wouldn't qualify... But hey, he was tryin'.
Bill AD5OL
- Original Message
From: Jim Lux &l
Huh?!? Near as I can tell the DSP code (DttSP) supports different
modes and settings for the watch receiver... seems to be a lack of UI
to set them that is the limitation. Seemed like a reasonable UI idea to me.
Regards,
Bill (kd5tfd)
At 04:49 PM 6/12/2008, Tim Ellison wrote:
>That
Try contacting the Chroma Pix folks - they sent me a program a few
years back that lets me point ChromaPix to a specific sound card -
think it's called spconf.exe
Regards,
Bill (kd5tfd)
At 01:11 PM 6/9/2008, Doug McCann wrote:
>I am using a SDR 1000 with the Edirol FA-66 and want t
years ago the Australian commercial SSB folks were on to the
work being done stateside with the Audio Folks on 14.198 then 14.178
..information was exchanged and they went over to the Aphex Air Chain, and a
bunch of goodies from Bob Orban.and were tickled at the results...
-Bill
[EMAIL PROT
option for polish and fullness add 3-6 dB at 80 Hz with a sharp
"Q"... and throttle for the sweet spot
You would be surprised a the number of studio voices this trick of 160 and a
3720 harmonic saved from the cutting floor
-Bill
[EMAIL PROTECTED]
http://www.kc4pe.com/a
is abt -119. With the
ARR in the circuit, the noise runs abt -110.
It makes me wonder if my 5K is up to snuff.
I would appreciate it if others would make similar measurements on 6 meters
and post me the results.
73,
Bill Tynan, W3XO
___
FlexR
I apologize to the members of this reflector.
I posted a message regarding 5K 6 meter performance and forgot to wipe out
all of the other messages below what I wrote.
This time I am doing that.
73,
Bill, W3XO
___
FlexRadio Systems Mailing List
an do on 6 meters, (at least
good enough for terrestrial work), I now have confidence that I have
adequate receive capability.
73 ES CU on 6
Bill Tynan, W3XO/5 EM00 SMIRK 800
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 24, 2008 11:00 AM
Subject: FlexRadi
I know a bit about Ozy and Janus. Also the HPSDR reflector (Info at:
http://hpsdr.org/reflector.html ) is a good source of Ozy/Janus questions.
Regards,
Bill (kd5tfd)
At 06:52 PM 5/20/2008, Dana Rawding wrote:
>Hi all,
>
>Can someone on the list that has integrated the Janus/Ozy com
balance the speakers off to the room, a near field situation
See...
http://www.kc4pe.com/amateurshack.htm
-Bill
- Original Message -
From: "Harry Williams" <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 03, 2008 3:34 PM
Subject: [Flexradio] Speakers for 5000A
>I have pur
If we want these guys to offer
superior products and compete with the big three then we could and must help
them out with up front cash
I my self took it for granted that the RX-2 would be handled the same way the
pre-orders on the 5000 were..Really never gave it a second thought!!!
I did locate one...thanks all! 73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
Does anyone have a Delta-44 sound card
they no longer need? Please email condition, approximate
vintage (or PC board copyright date) and price off-list please
73, Bill W4ZV
___
FlexRadio Systems Mailing
96K bandwidth
has been perverted into two 48K channels by the sales types, and sounds like a
"good" MP3 vs. the promised CD quality.
Bill AD5OL
- Original Message
From: Gary Carter <[EMAIL PROTECTED]>
To: flexradio@flex-radio.biz
Sent: Monday, March 31, 2008 8:
I don’t know where these messages have been. I posted them months ago,
probably in October 2007.
73,
Bill, W3XO
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.20.4/1276 - Release Date: 2/13/2008
9:41 AM
d tolerance) and therefore
nothing will mate properly.
Another thing you might try is one of the Cramolin contact enhancement products.
Bill AD5OL
- Original Message
From: Dave Aabye <[EMAIL PROTECTED]>
To: flexradio@flex-radio.biz
Sent: Sunday, March 2, 2008 8:52:57 AM
Subject: [F
ld be interesting to see
the combined effect of many. Seems like you would get an additive
effect from phase noise over a very wide bandwidth.
73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/lis
ame* band as their TX will run into these issues.
Other solutions such as Inrad's front-end filters for
limited areas of the same band may help somewhat.
http://www.inrad.net/home.php?cat=146
73, Bill W4ZV
___
r Packet-like spot generation (technically
not "assisted" unless contest sponsors rule otherwise).
73, Bill W4ZV
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.fle
about was committed trying to find the Ground Loop.
Bill
KC4PE
http://www.kc4pe.com/amateurshack.htm
- Original Message -
From: "Jim Lux" <[EMAIL PROTECTED]>
To: "Ray, K9DUR" <[EMAIL PROTECTED]>; "Flex-Radio E-Mail Reflector"
Se
Good Show, Mike .In addition to all its other outstanding
performance attributes it a great "Audio Radio", rivals the ole Kenwood
sound
When is Rob Sherwood going to update his list of receiver performance
ratings and include the Flex 5000 series??
-Bill
- Origin
Thought this was common denominator knowledge if you scope & look at a
Two - Tone at different setting's to attain a "0" VU level, the mixer their
abouts at 1/2 half scale is the cleanest ... Now the "hair" is gone off of
"Sugar-Sugar".. !!
-Bill
was suspect.
It turned out that the only problem was that I was connecting to the radio
with a standard mono headphone jack like all of us hams use.
Once I acquired speakers and connected them, everything was fine.
73,
Bill, W3XO/5 EM00
No virus found in this outgoing message
Not only is the Index wrong, but on Page 40 it says “See the tuning methods
on Page 146”.
The tuning methods are actually on Page 137.
73,
Bill, W3XO/5 EM00
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.14.4/1057
Many besides myself have reported the following problem with the setup-test
function. when the test button is pressed there is no tone coming out of either
speaker. We are all using the delta44 sound card. This function used to work
up until about 3 months ago
Bill Nagle
Thanks to Eric for helping with this problem. It appears that if you have
two transverters with the same frequency range only the first one in the
list will be selected ever. In my case my third and fourth transverters were
for 902Mhz and the third one was always being selected.
In my opinion t
is really selected when trying to select transverter 4.
I believe this behavior exists in both PowerSDR 1.10.3 AND 1.10.4.
Has anyone seen this problem?
Best Regards,
Bill Bailey AE6EQ
___
FlexRadio Systems Mailing List
FlexRadio@flex
I am having transmit audio problems with VAC 4.08 and PowerSDR 1.10.4. I am
seeing NO transmit audio with MIXW and WSJT6.
However If I load PowerSDR 1.10.3 I can get transmit audio both with MIXW
and WSJT6.
Is anyone else experiencing similar problems?
Best Regards,
Bill Bailey
ent.You can isolate the I2C bus on Janus buy
removing the 2 jumpers near U11 that are labeled I2C BYP on
Janus. Things will not work in that configuration, but Ozy should
enumerate with the computer.
One last thing to check - JP 12 on Janus (LAST JTAG) should be open.
Regards,
Bill (kd5tfd)
A
USB 2 port? Ozy will need a USB 2 port
-- don't know what it does if plugged into a USB 1.x port.
If you're looking in the device manager for it the VID should be
0xfffe and the PID should be 0x7.
Bill (kd5tfd)
At 07:10 PM 1/22/2008, Philip Theis wrote:
>* High Performance Sof
ieved.
This is typical of what one finds out during contests.
I'm sure glad that the 5K doesn't have some inherent problem with 222 RF as my
intention is to order the Elecraft transverters for 2, 222 and 432 and probably
a DEMI for 1296 and drive all of t
is a small amount of the motorboating but after going to tx then back rx it is
4
times louder.
I am using a delta44 board into an athlon 2.5g machine
I also have windrm loaded and it works fine
Bill Nagle
[EMAIL PROTECTED]
___
FlexRadio Systems
HI All and Merry Christmas
I am using the winkey with good results on the SDR1K key jack but would
like to try for the improvements I hear the com port offers, I found the
com port pinouts for a paddle, but can't seem to locate the pinout for a
straight key or a keyer output, I don't need dots and
the nuts for EME if it's capable of digging signals
out of noise. But, I'm afraid I'm in the dark as to what CCW is.
Someone, please enlighten me.
73,
Bill, W3XO
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/piperm
Sorry to hear that Gerald,
With all the options these days for backing up, there is no reason not to,
but in my experience the majority of people don't backup. A simple 2GB usb
drive can be had for way less than 50 bucks at Wal Mart, no need to worry
about backing up the entire drive, just back up
ou can hear the wiring in
conduits vibrate in their magnetic fields in response to the elevator SCR motor
drives current drains following the gating signals ramping up and down. I
suspect that a line choke that will filter out that kind of hash would cost the
apartment building a pretty penn
perhaps as many as 6 or 7. There would be up to 7 half circles side
by side going from small to large back to small in order left to right.
I realize that this is a poor description, however it's driving me nuts.
Has any one else seen an artifact like this?
Best Regards,
I just tried PowerSDR ver 1.8 and there is no delay in it, works perfect.
For some reason that verson runs a lot better on this SDR-1000 than the
newest one.
K4FX
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
__
Hi All,
I am having about a 2 second delay before I hear the RTTY signals in my
monitor using MMTTY,.
I went into VAC and set the latency to 0 on manual, and the following
transmisssion began sending instantly like it used to, but the next one
had the same delay?
Using a SDR-1000 and FA-66 with
I was wondering if there is any way to tell the age of a SDR1K by the
serial #, I have one that is supposed to be less than a year old, but have
doubts.
Thanks
K4FX
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
501 - 600 of 942 matches
Mail list logo
