It wouldn't hurt to file a bug at bugreporter.apple.com.
What version of firmware does your e4200 have?
I have access to a unit that I can test with.
- Terry
On Mon, Jul 11, 2011 at 5:26 AM, Matt Hopkins thematthopk...@gmail.com wrote:
I have a setup with four Linksys E4200 wireless routers
KeyboardInterrupt.
You should always do something like:
try:
some code
except TheExceptionClass:
some code
HTH,
- Terry
On Wed, Jan 26, 2011 at 2:47 PM, McCann, Brian bmcc...@andmore.com wrote:
Hi all. I've got freeradius working using a python library for auth, but
something interesting
reproduce
the problem?
Send me an E-mail with the logs and packet trace.
We can continue discussing off list - but the above information is useful
for other FreeRADIUS users.
- Terry
On Mon, Jan 17, 2011 at 6:22 AM, Rob Yamry rya...@kimberly.k12.wi.uswrote:
Does this problem also happen with iOS 4.x
the relevant
pieces)?
Thanks,
- Terry
On Thu, Jan 13, 2011 at 5:38 AM, Rob Yamry rya...@kimberly.k12.wi.uswrote:
Hmm. Are you asking for a client cert with PEAP; your original trace has:
[peap] TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
Hi,
I'm running into an issue where FreeRADIUS allows an invalid certificate (one
not signed by my configured CA) to successfully authenticate to EAP-TLS.
There's a message in the log that clearly indicates that the CA wasn't found
(-- verify error:num=20:unable to get local issuer
Thanks to all who offered assistance. I figured it out.
FreeRadius users mailing list freeradius-users@lists.freeradius.org
writes:
FreeRadius users mailing list [
mailto:freeradius-users@lists.freeradius.org
[EMAIL PROTECTED] writes:
I must be missing something here, likely due to my limited
FreeRadius users mailing list freeradius-users@lists.freeradius.org
writes:
I must be missing something here, likely due to my limited experience
with
FreeRADIUS.
No, all you have to do is to be able to read. With care and understanding.
OK, I'll Re-read again.
After re-reading the
is wrong for 1.1.7.
Ivan Kalik
Kalik Informatika ISP
Dana 14/9/2007, Terry Pelley Terry.Pelley at ocdsb.ca pie:
FreeRADIUS Version 1.1.7
I am using the FreeRADIUS.net Windows version of the software. at least
for the time being.
I am trying to set up a very basic single user account for a very
FreeRADIUS Version 1.1.7
I am using the FreeRADIUS.net Windows version of the software. at least
for the time being.
I am trying to set up a very basic single user account for a very specific
purpose and have created the account as follows.
hunttest User-Password == hunttest, Huntgroup-Name ==
I want to be able to specify which Wireless Access Points certain users
can gain access from.
Is there an attribute that I can set so that a user can only be
authenticated if the request comes from a predetermined NAS or group of
NASs?
thnx.
-
List info/subscribe/unsubscribe? See
Sorry, First posting contained no subject header.
This is a repost.
I want to be able to specify which Wireless Access Points certain users
can gain access from.
Is there an attribute that I can set so that a user can only be
authenticated if the request comes from a predetermined NAS or group
FreeRADIUS Version 1.1.7 on Novell SLES10
The question is simple but I can't seem to find the answer to it so I will
apologize in advance.
Can some one tell me the format for entering the date in the Expiration
attribute?
I'm using the users file to authenticate users on a small wireless
I'm Currently running FreeRADIUS Version 1.1.3-r0.1.2 (Windows version)
Knowing that I am long overdue for an upgrade, I backed up all of my
configs and ran the 1.1.7 installer. everything seems to go just fine and
the service is up and running when the update process completes. However,
when I
FreeRADIUS Version 1.1.3-r0.1.2 (Upgrade is Pending)
Is there a way to add my own custom attributes to my users other that
simply putting a # in front of the line?
I would like to be able to add a Corporate asset tag number for my
wireless users laptops.
Thanks.
-
List
FreeRadius users mailing list freeradius-users@lists.freeradius.org
writes:
Terry Pelley wrote:
FreeRADIUS Version 1.1.3-r0.1.2 (Upgrade is Pending)
Is there a way to add my own custom attributes to my users other that
simply putting a # in front of the line?
What do you mean
Thanks,
I figured it all out.
Cheers,
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
not appear to get processed. I think this is happening
because the Proset Client sends the User-Name as anonymous and as there
is no anonymous user defined, the attributes do not get applied.
How do I get the User-Name to be sent correctly?
Thanks in advance.
Terry Pelley
Network Analyst
Thank you,
That worked perfectly.
FreeRadius users mailing list freeradius-users@lists.freeradius.org
writes:
Read instructions in eap.conf. You most likely need to set:
use_tunneled_reply = yes
in peap section.
Ivan Kalik
Kalik Informatika ISP
Terry Pelley
Network Analyst
Business
the \\ComputerName prefix?
Thanks in advance,
Terry Pelley
Network Analyst
Business and Learning Technologies
Ottawa-Carleton District School Board
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
it be an
authentication allowed or rejected) it still answered. so it won't fail
over to the next ldap server...
--- Alan DeKok
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello,
I have one client that is having a problem authenticating via wireless EAP-TLS. The client is a Windows XP SP2 computer using a an internal Dell wireless card. The client associates with the access point-a Cisco Aironet 1130-but is continually reports an attempting to authenticate message.
this is...and it may not be important
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
section based on
GroupName and I don't know how.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
:= `uid=%{User-Name},ou=People,dc=mtaonline,dc=net`
Fall-Through = no
assuming your ldap instatiations are ldap_primary and ldap_secondary
respectively.
thanks in advance
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe
-define the basedn in
either huntgroups, or on a default line in the users file so the search
comes up with a single user.
thanks for your help
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org
! thanks Ben
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
: [EMAIL PROTECTED]
cn: Ftp99 Tester
homeDirectory: /export/home/ftptest99
dc: People.mtaonline.net
radiusFramedIPAddress: 192.168.200.1
radiusFramedIPNetmask: 255.255.255.0
radiusGroupName: dsl8m
radiusGroupName: dial
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL
What will happen if I change the timer value?
Thanks
Terry Zarelli
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
an early version(pre 1.0) to authenticate our VPN and iPass accounts for a couple of years now and it works great. Actually we use4 Radius servers for our enterprise. Thanks for the great work.
Thanks
Terry Zarelli
On 3/17/06, Alan DeKok [EMAIL PROTECTED] wrote:
Terry Zarelli [EMAIL PROTECTED
I apologize, it appeared that my first post did not show up on the list. Sorry
On 3/17/06, Phil Mayers [EMAIL PROTECTED] wrote:
Terry Zarelli wrote: Hello, I have a question about a configuration entry in the eap.conf
file.Why did you think posting the same identical question twice, 24 hoursapart
What will happen if I change the timer value?
Thanks
Terry Zarelli
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
,dc=net
Fall-Through = no
DEFAULT Auth-Type := Reject
Reply-Message = Please call the helpdesk.
the ldap user i'm testing this all with looks like this:
dn: uid=tfike,ou=People,dc=mtaonline,dc=net
cn: Terry
gecos: Terry,,Fike
gidNumber: 14
homeDirectory: /export/home/tfike
Hi all,I try to modify rlm_example.c toimplement challenge/response authentication, but i dont' know how to code it, i know i have to modify example_authenitcate function , but when i install it to my freeradius server , it cannot return RLM_MODULE_OK, anyone can help me with that, here is my
Sarkis Gabriel wrote:
Just wondering when i build the RPM with SPEC file, does it enable --with-experimental-
modules? or is there a specific command to make the extra modules?
I have compiled the RPMS no problem there but the modules are not included and if i
compiled from .tar.gz when i run
!
Cheers
Terry
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
when you set up the client in the clients.conf
did you put all the client info inside {} ?
client ip {
secret = nosecret
shortname = mycomputer
}
it didn't look that way in the message, but that may have just been for
ease of writing...
--
Terry J Fike Jr
System Administrator
MTA Solutions
to set the pools, but where do
define them as a per NAS? (ie: pool 1.2.3.0/24 to NAS1 and 1.2.4.0/24 to
NAS2)
then in the user's info just add Pool-name := poolname right?
what is the Group == poolname part for in the DEFAULT??
would that be for the fallthroughs?
--
Terry J Fike Jr
System
days to do this to ensure the data i was getting
off the pdsn would be from the current build without the extra modules
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
...all my users authenticate just like
normal...even from the pdsn, i get my accounting data just fine...even
from the pdsn...*shrug* this just is not making any sense...
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See
...sent just fine.
i guess it is time to build me a new radius box...
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
from md4.c) but no errors. is this
normal when compiling with --enable-developer?
also...any other ideas?
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
a
lot of things :( tied into the same ip as radius)
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Terry J Fike Jr [EMAIL PROTECTED] wrote:
I did amake distclean before ./configure each time
The *installed* files may be causing problems.
even if i'm telling a different prefix each time?
(i ask because i have 1.0.2 in /usr/local and 1.0.0 in /opt)
as i make new versions i just change
) and VERY stable (pretty much takes a user
fubar to break it) you guys have done great work
i'll be sad to see it go...
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
What is gdb? (and what sort of package could i find it in) we don't
have it on our boxes so i'll need to find it and install it then get you
the info you need.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http
to dig the info you need out of
this file?
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
|MAP_ANON, -1, 0) = 0x7DA0
munmap(0x7DA0, 8192)= 0
_exit(0)
I can send the whole core file and truss file if need be. I'm still a
little surprised this works for all but one of my NAS devices...
Thanks for your help on this so far :)
t-
--
Terry J Fike Jr
if your on unix world in your $prefix/sbin should be a script called
rc.radiusd call this like so:
/prefix/sbin/rc.radiusd restart
that is a quick clean way of restarting radius
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe
be.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
up? (In the radius.conf file i'm setting locking=yes for
this detail file)
Thanks in advance.
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
...
... some more stuff that i'm not sure if i need to add or not ...
Anyone got any ideas what i might be doing wrong here?
Thanks in advance for your help
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http
or directory
In file included from x99_rlm.c:54:
msg trunkated.
on my Sol 9 box, i removed all references to x99 in the makefile and
then it compiled just fine. But then, i didn't need that stuff so i was
okay with that.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL
I
suppose the question is, will there be a problem running two sets of
radrelay (one on all accounting packets, and one on accounting packets
from just one NAS)? or is there a better way to do this and I'm just
being blind?
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
requests to seperate logfiles based on source ip and time
- 1 to log all requests to a single logfile
- 1 to log requests from a particular NAS to a single logfile
--
Groeten, Regards, Salutations,
Okay, sounds like what i was thinking. Thanks very much!
t-
--
Terry J Fike Jr
System Administrator
MTA
a clean load each time. BTW, we are/were running this on
Sol 8 and now Sol 9.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
, as far as i can see, none of our
NAS devices are using the Class attribute (as it doesn't show up in any
of the accounting packets from the different NAS devices), but i thought
i would check with those who know more than me before i go trying to
break things.
thanks in advance.
Terry
--
Terry
in the conf files? (not
to say i couldn't be blind and have totally missed it though)
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
http://www.directdial.com/ca/shoptrendware/item/TW100-BRV-204.html
these arent too bad. i have tested to pix and linux vpn. otherwise i
would recommend cisco pix. the older 520's are pretty cheap now..
_Terry
Kaczmarek, Thaddeus wrote:
On Nov 26, 2004 03:48 PM, Omar Armas [EMAIL
Terry J Fike Jr [EMAIL PROTECTED] wrote:
/ Okay, i'm not sure if this is the right place, to ask, but since it is /
/ more or less radius accounting i thought i'd try here. Does anyone know /
/ the difference in the data in the columns inputoctets/outputoctets and /
/ inputoctets64/outputoctets64
The Acct_Output_Octets_64 isn't a standard RADIUS attribute. It's
a Redback attribute. (see dictionary.redback)
I suggest asking Redback what it means, and why it's zero.
Alan DeKok.
Okay, will do. Thank you very much!
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
normally)
thanks in advance
t-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
problems with
sockets but that is a different thing. Also, the system is using much
less memory and cpu on 1.0.0 than it was on 0.8.3. And supposedly it
gets even better on 10g.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe
,
sql.conf, users, radiusd.conf) one at a time and see where it dies.
I'll keep everyone informed as i find out more info.
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
, make install from previous, but
this time it is working...only change i've made on the box was to
re-link in all lib directories (which i did to get radius libraries
linked in) (did this before re-install and old 1.0.0 still crashed)
so... *shrug*
--
Terry J Fike Jr
System Administrator
MTA
-
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
that
could supposedly do authentication via an radius server...)
what sort of install did you do on ES3?
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-- Barbulescu Mihai Network Engineer RoEduNet Bucharest NOC
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
and appreciated.
Thank you
--
Terry J Fike Jr
System Administrator
MTA Solutions
907-793-4100
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
68 matches
Mail list logo