[gentoo-user] ldconfig warning

Hi I'm getting the following warning when I run ldconfig ldconfig: /usr/lib/libstdc++-libc6.1-1.so.2 is not a symbolic link is this anything to worry about? Cheers Adam -- The universe contains untapped and heretofore unimagined energy sources. They are before your very eyes, yet you cannot

Re: [gentoo-user] lmsensors or equiv. for 2.6.0-test6?

On Friday 10 October 2003 05:03, Collins Richey wrote: > On Thu, 9 Oct 2003 17:23:44 -0400 Jerry McBride <[EMAIL PROTECTED]> wrote: > > On Thursday 09 October 2003 01:09 am, Collins Richey wrote: > > > > wrote: > > > > > > ok, I have i2c, etc. in my kernel and the following modules loaded: > > > >

[gentoo-user] Linux Kernel Config Problem in KDE Control Center

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I was looking at my Linux Kernel configuration in KDE's Contral Center. I am not sure if this is a problem or anything since my computer works fine. Here is the error: - -

Re: [gentoo-user] Blocked Deps.. how do I get rid of this?

--- Sven Vermeulen <[EMAIL PROTECTED]> wrote: > On Thu, Oct 09, 2003 at 12:15:47PM -0400, Paul K. Dickson wrote: > > I'm always getting this, and the only way around is to unmerge xfree and > > xft, then it disapears, but, then it will remerge them again on it's > > own. Anyone know how to find o

Re: [gentoo-user] Running az script after dialing a ppp conenction

At 11:13 PM 10/9/03 , Joshua Banks wrote and said this: Hey Steve, I'm running Shorewall firewall and I tried doing the same thing to no avail. I'm using KDE 3.1.4 and I'm using KPPP tool to bring up ppp0. So as a work around I just added shorewall to the default runlevel. "rc-update add shorewa

Re: [gentoo-user] Running az script after dialing a ppp conenction

--- Andrew Gaffney <[EMAIL PROTECTED]> wrote: > Steve wrote: > > I have a firewall script that I want to run after ppp successfully > > starts. I have tried putting it in /etc/ppp/ip-up but to no avail. Any > > ideas? > > How are you bringing ppp0 up? Hey Steve, I'm running Shorewall firew

Re: [gentoo-user] emerge update only if needs

On 10/09/03 Selentek 24331-03 wrote: > Hello, > > I's emerge have any solution to UPDATE-ONLY-NEEDS. > > I don't want to update Xfree to -r3, > -r2 is good enough. > > But emerge -p -u gtk2 wants to do it. Don't use -u as it will also update dependencies. Only use -u for system or world upgra

Re: [gentoo-user] Why new packages for emerge -Duvp world?

On 10/09/03 Dhruba Bandopadhyay wrote: > Hello the following were my updates but why suddenly so many new > packages? > > wolf updates: > > [ebuild U ] sys-devel/autoconf-2.57a-r1 [2.57a] > [ebuild U ] dev-lang/python-2.2.3-r2 [2.2.3-r1] +readline -tcltk > +berkdb -bootstrap -build -do

Re: [gentoo-user] Gnucash broken after todays emerge -up world

On Monday 06 October 2003 06:04 pm, Chris Gentle wrote: > Looks like today's emerge pulled in the Gnome 2.4 stuff. Everything > installed OK but gnucash doesn't work. It needs gconfd-1 and > apparently it's not running. I can start gconfd-1 manually and > gnucash will work. Anyone else have thi

Re: [gentoo-user] emerge -U portage fails

On 10/09/03 Cal Evans wrote: > Yes, but for some reason it got masked yesterday morning. I updated 6 > > servers and it downgraded them all. Now I'm doing it again and it > looks like it's unmasked again. (grrr) The problem was that -r3 was removed for a short period of time. Marius --

Re: [gentoo-user] lmsensors or equiv. for 2.6.0-test6?

On Thu, 9 Oct 2003 17:23:44 -0400 Jerry McBride <[EMAIL PROTECTED]> wrote: > On Thursday 09 October 2003 01:09 am, Collins Richey wrote: > > On Wed, 8 Oct 2003 20:26:20 -0400 Jerry McBride <[EMAIL PROTECTED]> > wrote: > > > On Wednesday 08 October 2003 07:57 pm, Thomas Eastman wrote: > > > > Is t

Re: [gentoo-user] Gnome/Ephiphany

On 2003.10.09 15:18, HvR wrote: that and do a: ln -s /usr/bin/mozilla /usr/bin/epiphany because of the new gnome thingies WILL call on epiphany but giving them moz is fine. Then they should be reported as bugs in their respective bug tracking facilities. They should follow the preference for we

Re: [gentoo-user] 3Com HomeConnect camera

On Wed, 2003-10-08 at 19:27, Jose Gonzalez Gomez wrote: > Is there anybody out there with this webcam working? I have tried to > activate the module in the kernel configuration with no success. It > seems that every application that tries to access the camera hangs, and > even worse, there's

Re: [gentoo-user] leafnode and localhost

No. See: http://www-dt.e-technik.uni-dortmund.de/~ma/leafnode/README-FQDN.html I also refer you to bug 25713 http://bugs.gentoo.org/show_bug.cgi?id=25713 HTH, Stroller. On 10 Oct 2003, at 1:46 am, Makurin Roman wrote: Is it possible to use leafnode with hostname=localhost leafnode-2.0.0_alpha

[gentoo-user] leafnode and localhost

Is it possible to use leafnode with hostname=localhost leafnode-2.0.0_alpha20030621 /etc/leafnode/config: server = news.fido7.ru -- Makurin Roman <[EMAIL PROTECTED]> lostFPRL -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] Remote printing on CUPS server

On Fri, 10 Oct 2003, Norbert Kamenicky wrote: > Hello, > > has anybody set up CUPS for remote printing ? > > This is what I did: > > *- on server side:* > - set up printer using web iface on server and test it (works OK) > > - modified /etc/cups/cupsd.conf like this: > > LogLevel

Re: [gentoo-user] new CPU & march=athlon-xp

On Thursday 09 October 2003 22:50, Stroller wrote: > I see that a week or so you recommended for the Pentium 3: > -march=pentium3 -Os -fomit-frame-pointer -msse -mfpmath=sse > but I gather from `man gcc` that -msse & -mfpmath=sse are not > supported on Pentium 2. > > Currently I'm using: >

[gentoo-user] Lm-sensors ?

I've gotten lm-sensors working on my Leadtek K7NCR18-D-pro motherboard. Several of the voltage readings were way off and I've adjusted the formulas to give me sane readings but I have no way of telling if they are correct. I've set things so that, for instance, the +12V reading reads +12V and

[gentoo-user] Remote printing on CUPS server

Hello, has anybody set up CUPS for remote printing ? This is what I did: *- on server side:* - set up printer using web iface on server and test it (works OK) - modified /etc/cups/cupsd.conf like this: LogLevel debug Allow From {client's IP} - *on client side: *- modified

Re: [gentoo-user] Running az script after dialing a ppp conenction

Steve wrote: I have a firewall script that I want to run after ppp successfully starts. I have tried putting it in /etc/ppp/ip-up but to no avail. Any ideas? How are you bringing ppp0 up? -- Andrew Gaffney -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] new CPU & march=athlon-xp

On 8 Oct 2003, at 9:18 pm, Hemmann, Volker Armin wrote: On Wednesday 08 October 2003 00:14, mathieu perrenoud wrote: CFLAGS="-O3 -march=athlon-xp -funroll-loops -fprefetch-loop-arrays -pipe -fomit-frame-pointer" After some years of compiling with different gcc versions I state, that using O3 is

[gentoo-user] Re: lmsensors or equiv. for 2.6.0-test6?

>> > via686a18308 0 >> > i2c_sensor 2432 1 via686a >> > i2c_viapro 5836 0 >> > i2c_core 21316 3 via686a,i2c_sensor,i2c_viapro >> > I think you need also the i2c_isa module! Without this I can't read anything!! bye -- [EMAIL PROTECT

Re: [gentoo-user] Portage question

Ernie Schroder wrote: Thanks Andrew. Let's just suppose that down the line I want to resume using a package I have injected. Will simply emerging the package = to or > the version I injected return the package to normal status? Or, is there other magic that must be performed? Unmerge injected pa

Re: [gentoo-user] No 2.6.0-test7 ebuild yet?

James Hanna Jr wrote: Hmmm No need for one. Just unpack it manually. If you must have an official ebuild file a bug and knowing the dev who deals with it he'll be only too happy to bump the version. -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] Portage question

Ernie Schroder wrote: On Wednesday 08 October 2003 12:10 pm, Andrew Gaffney wrote: Ernie Schroder wrote: I've removed i2c and lm-sensors from my box because there is no ebuild as yet for version 2.8.0 which I need to support my chipset (nforce2). I have i2c and lm-sensors-2.8.0 installed from sou

Re: [gentoo-user] is there a good XF86config creator

HvR wrote: the package from redhat is Xconfigurator maybe we can use the rpm2tar stuff to make an ebuild out of it I'm working on that. Its a pain in the butt because a few of its dependencies are available only from RH as RPMs or SRPMs. -- Andrew Gaffney -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] Blocked Deps.. how do I get rid of this?

On Thu, 2003-10-09 at 14:59, Doug Weimer wrote: > 'emerge -u xfree86' for all ebuilds >4.3.0-r1 are now blocking xft and > they wont bring it in as a dependency. Your virtual file might be > bringing it in. Take a look at /var/cache/edb/virtuals and find the line > with virtual/xft in it, do you h

Re: [gentoo-user] Blocked Deps.. how do I get rid of this?

On Thu, 2003-10-09 at 09:32, Paul K. Dickson wrote: > Yes, I have to unmerge both, then I type 'emerge -u xfreewhatever, and > it emerges XFT along with it, then the conflict is back again. Quite > irritating:) 'emerge -u xfree86' for all ebuilds >4.3.0-r1 are now blocking xft and they wont bring

[gentoo-user] No 2.6.0-test7 ebuild yet?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hmmm -BEGIN PGP SIGNATURE- Version: PGP 8.0.2 iQEVAwUBP4XYFZZClWawimujAQITfwgA6tXvoR7HUlDbs6d+7uwP98G8jGggtVL6 hAk//yCn0DfLmOT1sI+3autrvvL3smneRwZzXl7IlvD2vrYugIRksnA1VmPXwKNd Yn0dZDnmgHurdHr48lWAErdN+OcBZejjLlRVUHQzXjCAmBDYwCVuFzt6x2qQlrK

Re: [gentoo-user] Root filesystem could not be mounted

On Thu, 2003-10-09 at 14:26, SMS WebMaster wrote: > From searching google I think (not sure) the problem because I didn't > enable "noatime" in the new kernel . > > The problem that I can't find this option in the kernel options !!! I think it goes in your /etc/fstab as an option for that filesy

Re: [gentoo-user] ntop, maybe gentoo related?

Hi all, > I wasn't aware of ntop until I read your mail, so thanks for that. I > emerged it and once I worked out how to run the thing it works > beautifully here. hey, that sounds great... > > /etc/conf.d/ntop: > NTOP_OPTS="--http-server 3000 --interface eth0,ppp0,lo -m > 192.168.0.0/24 -q"

Re: [gentoo-user] XFree86 3D: slow, or normal?

- Original Message - From: "Ernie Schroder" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, October 09, 2003 3:45 PM Subject: Re: [gentoo-user] XFree86 3D: slow, or normal? > On Thursday 09 October 2003 08:15 am, SN wrote: > > My GF 4 is also much slower on Gentoo, I had Man

Re: [gentoo-user] lmsensors or equiv. for 2.6.0-test6?

On Thursday 09 October 2003 01:09 am, Collins Richey wrote: > On Wed, 8 Oct 2003 20:26:20 -0400 Jerry McBride <[EMAIL PROTECTED]> wrote: > > On Wednesday 08 October 2003 07:57 pm, Thomas Eastman wrote: > > > Is there some kind of lmsensors or equivalent package for the new > > > test-series of ker

RE: [gentoo-user] Root filesystem could not be mounted

noatime is in fstab.. That doesn't make any sense to me. Using reiserfs calls for notail on the boot partition.. Thats the only know oddity I know of... > -Original Message- > From: SMS WebMaster [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 09, 2003 4:27 PM > To: [EMAIL PROTECTED]

Re: [gentoo-user] Root filesystem could not be mounted

From searching google I think (not sure) the problem because I didn't enable "noatime" in the new kernel . The problem that I can't find this option in the kernel options !!! any help ? SMS WebMaster wrote: No I am sure there is no problem with my lilo.conf image = /boot/kernel-2.4.22

Re: [gentoo-user] Root filesystem could not be mounted

No I am sure there is no problem with my lilo.conf image = /boot/kernel-2.4.22 root = /dev/hda4 label = Gentoo initrd=/boot/initrd-2.4.22 append="root=/dev/hda4 init=/linuxrc hdc=ide-scsi" image = /boot/kernel-2.4.20-gentoo-r5 root = /dev/hda4 #root

[gentoo-user] Running az script after dialing a ppp conenction

I have a firewall script that I want to run after ppp successfully starts. I have tried putting it in /etc/ppp/ip-up but to no avail. Any ideas? Updated 7/20/2003 http://www.pennswoods.net/~spatz/state_parks/State_Parks_of_Pennsylvania.html -- [EMAIL PROTECTED] mailing list

Re: [gentoo-user] Root filesystem could not be mounted

SMS WebMaster wrote: This didn't help me :( BTW: I changed the line mount / -n -o remount,ro &>/dev/null in /etc/init.d/checkroot to mount / -n -o remount,ro and reboot my PC so I got this message : mount: / not mounted already or bad option Any help? (Remember I can use my old ke

Re: [gentoo-user] Root filesystem could not be mounted

This didn't help me :( BTW: I changed the line mount / -n -o remount,ro &>/dev/null in /etc/init.d/checkroot to mount / -n -o remount,ro and reboot my PC so I got this message : mount: / not mounted already or bad option Any help? (Remember I can use my old kernel

[gentoo-user] Problems with the new X

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Anyone else having problems since emerging the newest stable? I updated it and since update periodically the mouse freezes which causes me to have to kill the server. I never had this problem with the prior versions. Anyone got an idea if there is a

Re: [gentoo-user] is there a good XF86config creator

the package from redhat is Xconfigurator maybe we can use the rpm2tar stuff to make an ebuild out of it On Wed, 2003-10-08 at 22:45, Donnie Berkholz wrote: On Thu, 2003-10-09 at 01:43, Donnie Berkholz wrote: > On Wed, 2003-10-08 at 18:26, HvR wrote: > > one thing i dislike about gentoo is tha

Re: [gentoo-user] Gnome/Ephiphany

that and do a: ln -s /usr/bin/mozilla /usr/bin/epiphany because of the new gnome thingies WILL call on epiphany but giving them moz is fine. On Wed, 2003-10-08 at 13:47, John Ziniti wrote: Richard Revis wrote: > I don't really want to recompile Mozilla with gcc 2.x (after the pain of > gett

Re: [gentoo-user] dd question

On Thursday 09 October 2003 16:42, Monah Baki wrote: > hi all, > > I'm trying to dd over nfs (dd if=/dev/hdc3 of=/mnt/home/gentoo.bin bs=512) > after 2 seconds, the computer that am dd'ing freezes,(the gentoo.bin file > size no longer increases on the remote nfs server) and I can't kill the dd > pr

Re: [gentoo-user] Accesscontrol for X

> >How do I set so that only specified users can use my running > >X-server? My problem is this: When I run a vncserver at home and > >connect to this server from school I can't do 'su -' and use any > >graphical frontend to any program because X is restricted to only my > >user. One solution would

Re: [gentoo-user] help with usb

I have just had a chance to get back to trying to get usb && SanDisk CF && devfs working. It seem that the removing usb-storage and insmod'ing back gets everything working ! Is this the result of a race condition between devfs & insmod usb-storage ? if so is there a work around ? TIA,

Re: [gentoo-user] is there a good XF86config creator

Hi HvR, Am Donnerstag, 9. Oktober 2003 00:26 schrieb HvR: > one thing i dislike about gentoo is that the support for creating > a proper XF86config file is missing. the equivalent tool from > redhat is much smarter. so what i do these days is install redhat > have it create the config file then co

Re: [gentoo-user] Re: PHP + GD

hi with no gd in use you will get no gd use "+gd" for internal gd use "+gd-external" for external I remember you should use internal gd according to www.php.net because of some modifications. joe On Thursday 09 October 2003 18:55, Sebastian Bergmann wrote: > Andrew Gaffney wrote: > > USE="gd

Re: [gentoo-user] Re: PHP + GD

It's still an option and not a requirement, even though 4.3 now has the GD library bundled in. Therefore requiring a keyword for it to be used still makes sense. HTH, =C= * Cal Evans * http://www.eicc.com * We take care of your IT, * So you can take care of your business. * * I think inside the

[gentoo-user] Re: PHP + GD

Andrew Gaffney wrote: > USE="gd" emerge php This makes no sense since PHP comes bundled with the GD library. :-/ -- Sebastian Bergmann http://sebastian-bergmann.de/ http://phpOpenTracker.de/ Das Buch zu PHP 5: http://professionelle-softwareentwicklung-mit-php5.de/ -- [EMAI

Re: [gentoo-user] Blocked Deps.. how do I get rid of this?

On Thu, Oct 09, 2003 at 12:15:47PM -0400, Paul K. Dickson wrote: > I'm always getting this, and the only way around is to unmerge xfree and > xft, then it disapears, but, then it will remerge them again on it's > own. Anyone know how to find out what else is doing this? The Portage User Guide con

RE: [gentoo-user] gentoo killed my pc

> > Video problem. Try reseating your video card. > > http://www.pcguide.com/ts/x/sys/beep/ > Marshal, Thanks. I've done all that. Removed the video card and used another one. It only happens with this video card, but it's not a seating problem. I think it's a power supply issue. My ears are p

Re: [gentoo-user] Blocked Deps.. how do I get rid of this?

Yes, I have to unmerge both, then I type 'emerge -u xfreewhatever, and it emerges XFT along with it, then the conflict is back again. Quite irritating:) I'll try umerging xft, but in past experiance, that produces a new block to the effect of "[blocks B ] x11-base/xfreewhatever" *shrug*.. I'

Re: [gentoo-user] Blocked Deps.. how do I get rid of this?

On Thu, Oct 09, 2003 at 12:15:47PM -0400, Paul K. Dickson wrote: > > I'm always getting this, and the only way around is to unmerge xfree and > xft, then it disapears, but, then it will remerge them again on it's > own. Anyone know how to find out what else is doing this? > > > [blocks B ]

RE: [gentoo-user] gentoo killed my pc

On Thu, 9 Oct 2003, Mark Knecht wrote: > My Gentoo box is using an Antec with a variable fan. I run it at minimum > speed and it's more quiet than the Silencer, however, sometimes the > Gentoo box doesn't boot correctly. Possibly a power supply issue, but > also possibly an Asus BIOS issue. (One l

[gentoo-user] Blocked Deps.. how do I get rid of this?

I'm always getting this, and the only way around is to unmerge xfree and xft, then it disapears, but, then it will remerge them again on it's own. Anyone know how to find out what else is doing this? [blocks B ] x11-libs/xft (from pkg x11-base/xfree-4.3.0-r3) Paul -- [EMAIL PROTECTED]

RE: [gentoo-user] gentoo killed my pc

> > Excellent advice on shopping. I've used PC Power and > Cooling supplies for years and found they work very very > well, too. > PC Power and Cooling makes great products. Very reliable. I've had 3 and not a one has failed. The machines have all been stable. I use one of their Silencer 400's r

Re: [gentoo-user] Accesscontrol for X

Patrick Börjesson wrote: How do I set so that only specified users can use my running X-server? My problem is this: When I run a vncserver at home and connect to this server from school I can't do 'su -' and use any graphical frontend to any program because X is restricted to only my user. One sol

Re: [gentoo-user] Accesscontrol for X

Patrick Börjesson wrote: How do I set so that only specified users can use my running X-server? My problem is this: When I run a vncserver at home and connect to this server from school I can't do 'su -' and use any graphical frontend to any program because X is restricted to only my user. One sol

[gentoo-user] Re: is there a good XF86config creator

On Wed, 8 Oct 2003, HvR wrote: > one thing i dislike about gentoo is that the support for creating a > proper XF86config file is missing. the equivalent tool from redhat is > much smarter. so what i do these days is install redhat have it create > the config file then copy it to a save spot, insta

[gentoo-user] dd question

hi all, I'm trying to dd over nfs (dd if=/dev/hdc3 of=/mnt/home/gentoo.bin bs=512) after 2 seconds, the computer that am dd'ing freezes,(the gentoo.bin file size no longer increases on the remote nfs server) and I can't kill the dd process, and I can't access the nfs mount point, all I can d

Re: [gentoo-user] Portage question

On Wednesday 08 October 2003 12:10 pm, Andrew Gaffney wrote: > Ernie Schroder wrote: > > I've removed i2c and lm-sensors from my box because there is no > > ebuild as yet for version 2.8.0 which I need to support my > > chipset (nforce2). I have i2c and lm-sensors-2.8.0 installed from > > source. I

Re: [gentoo-user] PHP + GD

a quick check of /usr/portage/eclass/php.eclass shows that you have to have the gd (possibly gd-external?) use flag set for this to compile in. =C= * Cal Evans * http://www.eicc.com * We take care of your IT, * So you can take care of your business. * * I think inside the sphere. Rus Foster wrote

[gentoo-user] Accesscontrol for X

How do I set so that only specified users can use my running X-server? My problem is this: When I run a vncserver at home and connect to this server from school I can't do 'su -' and use any graphical frontend to any program because X is restricted to only my user. One solution would be to do a 'xh

Re: [gentoo-user] PHP + GD

Rus Foster wrote: Hi, Can someone point me in the right direction of how to install php with gd support? I've built php but phpinfo() doesn't show gd even though I installed that seperatly USE="gd" emerge php -- Andrew Gaffney -- [EMAIL PROTECTED] mailing list

[gentoo-user] PHP + GD

Hi, Can someone point me in the right direction of how to install php with gd support? I've built php but phpinfo() doesn't show gd even though I installed that seperatly Rgds Rus Foster -- w: http://www.jvds.com | Free Debian UNIX Shell Accounts e: [EMAIL PROTECTED]| http://www.jvds.

[gentoo-user] SmartArray 641 install problems

I am trying to install gentoo on a HP/Compaq ProLiant ML370 G3 that has a SmartArray 641. I am having lots of troubles figuring out how to do this. I have looked in the forums, but haven't found any answers yet. I am trying to install from the x86-basic-1.4-20030911 iso. When I boot with the doscs

Re: [gentoo-user] gentoo killed my pc

Excellent advice on shopping. I've used PC Power and Cooling supplies for years and found they work very very well, too. On Thu, 9 Oct 2003 09:54:23 -0500 "Bjorn Sodergren" <[EMAIL PROTECTED]> wrote: To Test if the Powersupply is bad: Don't go blindly with the biggest 500w power supply you c

Re: [gentoo-user] rpm problems

I managed to find a source tarball for that version from an emergelinuxcd project, or something like that. It won't compile against either version of kudzu in portage (0.99.66 and 0.99.99). David wrote: I downloaded the RedHat rpm from rpmfind.net rpm -Uvh Xconfigurator-4.10.7-1.i386.rpm warn

RE: [gentoo-user] gentoo killed my pc

To Test if the Powersupply is bad: 1) Remove PSU from the case all together. 2) Look at the ATX connector, there will be a Green wire. Short this wire to ground with a small wire or conductive material (paperclip, etc) 3) If you have a voltmeter handy, Voltages on the ATX supply should read as f

Re: [gentoo-user] Gentoo CD-ROM

On 2 Oct 2003, at 10:06 am, Pietro Leone wrote: Hallo, a friend of mine (a crazy one ;-) want to download for me all the gentoo packages and put them into CD-ROMs. Is it possible? How can I use these CDs? Portage can manage CDs as sources of packages, as apt of Debian does? (Of course without co

Re: [gentoo-user] rpm problems

Also, the download page shows this: Requires * XFree86 * kbdconfig * mouseconfig >= 2.8 * kbd * hwdata * initscripts >= 3.94 * XFree86-xfs = 4.2.0 * kudzu * ld-linux.so.2 * libc.so.6 * libdl.so.2 * libgdk-1.2.so.0 * libgdk_pixbuf.so.2 * libg

Re: [gentoo-user] rpm problems

I downloaded the RedHat rpm from rpmfind.net > rpm -Uvh Xconfigurator-4.10.7-1.i386.rpm warning: Xconfigurator-4.10.7-1.i386.rpm: V3 DSA signature: NOKEY, key ID db42a60e error: Failed dependencies: XFree86 >= 4.1.0 is needed by Xconfigurator-4.10.7-1 kbdconfig is needed by Xconf

Re: [gentoo-user] gentoo killed my pc

On Thursday 09 October 2003 09:13 am, Jason Cooper wrote: > Meka[ni] ([EMAIL PROTECTED]) scribbled: > > > BIOS gave me +3,23 for the +3.3 (which is just the half of the > > > 6.46 given by lm) > > > -27.36 / 2 = -13.68 would be perfect. let's assume sensors also > > > missed that div 2 > > > VCore

Re: [gentoo-user] XFree86 3D: slow, or normal?

On Thursday 09 October 2003 08:15 am, SN wrote: > My GF 4 is also much slower on Gentoo, I had Mandrake installed on > it before and I had twice the rate with glx gears, must be some > patch in the kernel, since I used sam drivers and same > configuration. > > > - Original Message - > From:

Re: [gentoo-user] gentoo killed my pc

Meka[ni] ([EMAIL PROTECTED]) scribbled: > > BIOS gave me +3,23 for the +3.3 (which is just the half of the 6.46 given by > > lm) > > -27.36 / 2 = -13.68 would be perfect. let's assume sensors also missed that > > div 2 > > VCore 2 is too strange to be accurate. > > I'm just worried by the -13.64,

Re: [gentoo-user] rpm problems

Peter Ruskin wrote: On Thursday 09 Oct 2003 14:02, Andrew Gaffney wrote: Yes, I know. You see the subject and immediately think I should be ignored because I'm on the wrong list, correct? Well, its not quite like that. I'm trying to write an ebuild for Xconfigurator. I'm getting the files from

Re: [gentoo-user] emerge -U portage fails

Yes, but for some reason it got masked yesterday morning. I updated 6 servers and it downgraded them all. Now I'm doing it again and it looks like it's unmasked again. (grrr) =C= * Cal Evans * http://www.eicc.com * We take care of your IT, * So you can take care of your business. * * I thin

Re: [gentoo-user] rpm problems

On Thursday 09 Oct 2003 14:02, Andrew Gaffney wrote: > Yes, I know. You see the subject and immediately think I should be > ignored because I'm on the wrong list, correct? Well, its not quite > like that. > > I'm trying to write an ebuild for Xconfigurator. I'm getting the > files from >

[gentoo-user] rpm problems

Yes, I know. You see the subject and immediately think I should be ignored because I'm on the wrong list, correct? Well, its not quite like that. I'm trying to write an ebuild for Xconfigurator. I'm getting the files from . I first tr

Re: [gentoo-user] lmsensors or equiv. for 2.6.0-test6?

On Thu, 9 Oct 2003 07:33:30 -0400 Leendert van den Berg <[EMAIL PROTECTED]> wrote: > On Wed, 8 Oct 2003 23:09:17 -0600 > Collins Richey <[EMAIL PROTECTED]> wrote: > > ok, I have i2c, etc. in my kernel and the following modules loaded: > > > > via686a18308 0 > > i2c_sensor

RE: [gentoo-user] multi threading

Here it is :) regards, RNuno [EMAIL PROTECTED] root]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping: 9 cpu MHz : 2392.295 cache size : 512 KB physical id

Re: [gentoo-user] XFree86 3D: slow, or normal?

SN wrote: My GF 4 is also much slower on Gentoo, I had Mandrake installed on it before and I had twice the rate with glx gears, must be some patch in the kernel, since I used sam drivers and same configuration. After trying Quake, I don't have the impression that the card works too slow. The speed

Re: [gentoo-user] XFree86 3D: slow, or normal?

SN wrote: My GF 4 is also much slower on Gentoo, I had Mandrake installed on it before and I had twice the rate with glx gears, must be some patch in the kernel, since I used sam drivers and same configuration. Sure it isn't because you're now in 32bit colour, and before you were in 16bit? Just a

Re: [gentoo-user] gentoo killed my pc

If the power supply has a spare cable that would attach to a disk drive use that. Usually you'll find black, red and yellow leads. Check DC volts between red and black and yellow and black. Unless you know that lmsensors is working correctly I'd ignore it - check the unit out. If you don't

Re: [gentoo-user] XFree86 3D: slow, or normal?

My GF 4 is also much slower on Gentoo, I had Mandrake installed on it before and I had twice the rate with glx gears, must be some patch in the kernel, since I used sam drivers and same configuration. - Original Message - From: "Roel Schroeven" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>

Re: [gentoo-user] gentoo killed my pc

Le Jeudi 9 Octobre 2003 14:05, brett holcomb a écrit : > What's the factor of 2 for? I'd take the power supply to > someone who can check it if you can't or get a new power > supply. What's the wattage on the power supply? I don't know why there is that factor of 2, but I've often seen sensors w

Re: [gentoo-user] Prelink Show at HispaLinux

FUD ist what you guys are talking, I just received a mail from one of the Mandrake Developers, he said, that they don't prelink any binaries, which makes sense to me. All they do is use compile kde with option objectprelink , but objectrelink has nothing to do with prelink. I don't know who spreade

Re: [gentoo-user] gentoo killed my pc

> BIOS gave me +3,23 for the +3.3 (which is just the half of the 6.46 given by > lm) > -27.36 / 2 = -13.68 would be perfect. let's assume sensors also missed that > div 2 > VCore 2 is too strange to be accurate. > I'm just worried by the -13.64, but there, the max and min are also pretty > stran

Re: [gentoo-user] gentoo killed my pc

I'd say use Mandrake again, before you ruin yourself. - Original Message - From: "mathieu perrenoud" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, October 09, 2003 1:00 AM Subject: [gentoo-user] gentoo killed my pc > okay, me again! > since I've installed gentoo, I've had

Re: [gentoo-user] gentoo killed my pc

What's the factor of 2 for? I'd take the power supply to someone who can check it if you can't or get a new power supply. What's the wattage on the power supply? On Thu, 9 Oct 2003 14:02:55 +0200 mathieu <[EMAIL PROTECTED]> wrote: BIOS gave me +3,23 for the +3.3 (which is just the half of th

Re: [gentoo-user] gentoo killed my pc

BIOS gave me +3,23 for the +3.3 (which is just the half of the 6.46 given by lm) -27.36 / 2 = -13.68 would be perfect. let's assume sensors also missed that div 2 VCore 2 is too strange to be accurate. I'm just worried by the -13.64, but there, the max and min are also pretty strange and 13.64 /

Re: [gentoo-user] gentoo killed my pc

I'd do as someone suggested - get a voltmeter and actually measure the values. Lmsensors may not be working properly. However, if your +/-12 and -5 are being shown correctly they look bad. On Thu, 9 Oct 2003 15:31:40 +0200 mathieu perrenoud <[EMAIL PROTECTED]> wrote: On Thursday 09 October 2

Re: [gentoo-user] emerge -U portage fails

Cal Evans wrote: == machine root # emerge -pUv world >>> --upgradeonly implies --update... adding --update to options. These are the packages that I would merge, in order: Calculating world dependencies | !!! all ebuilds that could satisfy ">=sys-apps/porta

Re: [gentoo-user] lmsensors or equiv. for 2.6.0-test6?

On Wed, 8 Oct 2003 23:09:17 -0600 Collins Richey <[EMAIL PROTECTED]> wrote: > ok, I have i2c, etc. in my kernel and the following modules loaded: > > via686a18308 0 > i2c_sensor 2432 1 via686a > i2c_viapro 5836 0 > i2c_core 21316 3 via6

Re: [gentoo-user] emerge dopewars

Thanks for the help I looked at /usr/portage/x11-libs/gtk+/gtk+-2.2.4-r1 RDEPEND set to >=x11-base/xfree-4.3.0-r3 it's to "Need this specific xfree version to get bugfree xinput support (#20407)" On 08:25 Thu 09 Oct , Senectus - wrote: > Umm.. I think sometimes it take a while for the updat

[gentoo-user] emerging wvdial

Hi all, I'm trying to build wvdial-1.53-r1. The compilation don't succeed for compiling wvstreams-3.70-r2. The build ends with: ... ../streams/wvstream.h:21: warning: `typename WvStreamCallback_bound::BoundFunc' is implicitly a typename ../streams/wvstream.h:21: warning: implicit typename is d

Re: [gentoo-user] Gnome/Ephiphany default browser for evolution now :(

On Wed, 2003-10-08 at 18:21, HvR wrote: > unfortunately epiphany shows up as the default browser for evolution > now...and more than once i found it to segfault on me, so i went in > and did a cp /usr/bin/mozilla /usr/bin/epiphany and all is well again Probably a cleaner solution would be to go to

Re: [gentoo-user] CD Writer and Dell Inspirion 8200

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 09 October 2003 01:53, Pat Kerwan wrote: > > Does everyone get this warning, or is there another versdion of cdrecord > > that I need to use? > > I get the warning, too. So far, I haven't had any problems burning a CD. As much as I hate

Re: [gentoo-user] Login Problem

On Wednesday 08 October 2003 22:09, Kees Bergwerf wrote: > I think it was pam_unix2.so or something like that. perhaps pam_unix.so2? > Well.. you will know it when you see it. Thanks, this helped. Console login is now working, but KDE still doesn't load... bye Markus --    

[gentoo-user] emerge update only if needs

Hello, I's emerge have any solution to UPDATE-ONLY-NEEDS. I don't want to update Xfree to -r3, -r2 is good enough. But emerge -p -u gtk2 wants to do it. Thanks. -- [EMAIL PROTECTED] mailing list

  1   2   >