his ? I prefere dispatch-conf to
> etc-update and if it's possible have it usable ...
>
That is the reason I don't use dispatch-conf. This extra that it would
add to my /etc/init.d files would prevent the init file from starting. I
just stick with etc-update and carefully check t
27;t in my world file so something must need it. What can
>>I do about the revdep-rebuild problem?
>>
>>
>You can't.
>
>
Se
Jerry McBride wrote:
>On Sunday 27 March 2005 05:04 am, Kathy Wills wrote:
>
>---big snip---
>
>
>
>>Kernel version is 2.6.11-r4. I'm using the tulip module that I have
>>always used. From kernel .config:
>>
>># Tulip family network device supp
Jerry McBride wrote:
>On Saturday 26 March 2005 09:25 pm, Kathy Wills wrote:
>
>
>>I've tried everything I can find by googling. Tried the forums. Can't
>>find anything that solves the issue. I have noapic as a kernel parameter
>>in grub. I still get t
.8.2.
>
>
>
>
If you are using -pam, then you need a patch for gdm before it will
work. I switched to xdm so I can keep my -pam without having to worry
about a patch.
--
Kathy Wills
I've tried everything I can find by googling. Tried the forums. Can't
find anything that solves the issue. I have noapic as a kernel parameter
in grub. I still get this error in dmesg:
tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1.
eth0: ADMtek Comet rev 17 at d12c8000, 00:0
Chris Hoover wrote:
Kathy Wills wrote:
Which version of splashutils are you using?
I'm using splashutils-0.9.1, I have an nVidia Geforce FX 5200, using
kernel 2.6.11-r4.
With this version, you need to make a copy of /usr/share/TTF/luxisri.ttf
in /etc/splash to make this work. I had to c
right hand corner of the pane where your folder listing
should be. What does clicking on that do?
I've had a similar problem before seems like I had to click on that
folder and then remove some ? marks.
--
Kathy
card and use
the 6111 versions of nvidia. The problem may be in your xorg.conf
because I'm not having any problem getting nvidia to work. I use udev
not devfsd.
--
Kathy Wills
+
+ Genealogy Web Site: http:/
Joseph A. Nagy, Jr. wrote:
Why is mod_perl for Apache1 not in portage?
Please if you are going to use an encrypted signature please register
it. Unable to find on key servers.
--
Kathy Wills
+
+ Genealogy Web Site: http
rvers.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannanorwill
This is because of the gtk-qt-engines package.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannano
run into, I can usually find my answers either here, in
the forum, or http://bugs.gentoo.org. The time I tried Linux from
scratch, I ran into problems compiling some of the basics and never did
find an answer to solve it. I'll stick with Gen
[EMAIL PROTECTED] wrote:
On Sat, 14 Feb 2004 11:09:48 -0600
Kathy Wills <[EMAIL PROTECTED]> wrote:
+
+ Genealogy Web Site: http://www.brannanorwil
ks for any help!
Jakob
Did you try reinstalling nvidia?
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannano
the
way I like it.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannanorwills.com
r it under
/dev/ide/host0/bus0/target0/lun0/part3. I just look for /dev/hda3. It
makes it a lot easier for me.
--
Kathy Wills
+
+ Genealogy Web Site: http://ww
een warned. Gentoo will
no doubt offer udev when it's ready for public consumption.
I have udev working just fine using the howtos found in gentoo forums.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.bra
found to
get rid of it. Everything runs and works fine so I don't even worry
about it.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannanorwill
ernels and nvidia.
I am not using devfs with my 2.6.2 kernel using nvidia. I use udev.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannano
PIII without any problem. I have
an intel board with Award bios and intel pIII 700.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannanorwills.com
Anthony Hoppe wrote:
Is it safe to update Portage? I've been reading about the problems
some people have been having. Has anybody been successful with the
update? Should I update?
~ Anthony
I didn't have any problems with it.
--
K
match_from_listraise KeyError, "Specific key requires an operator
(%s) (try adding an '=')" % (mydep) KeyError: "Specific key requires an
operator (dev-libs/elfutils-0.84) (try adding an '=')" bash-2.05b$
Just curious as to which version of portage it
Timothy Grant wrote:
I'm having the exact same problem.
There has now been a bug report filed on this see
http://bugs.gentoo.org/show_bug.cgi?id=40487 but no resolution yet to
the problem.
--
Kathy Wills
+
+ Genealog
Has anyone been able to update to xmms-1.2.9-r2. The ebuild seems to be
having trouble finding all the patches. It is looking for
xmms-1.2.9-gentoo-patches-0.5.tar.bz2 and can't find it. I haven't been
able to find it on any of the mirrors either.
--
K
this bug report.
http://bugs.gentoo.org/show_bug.cgi?id=40326
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannanorwill
Collins Richey wrote:
Collins Richey wrote:
But do you have a VIA chipset?
No mine is not a VIA chipset. I have an AWARD bios.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.brannanorwills.com
d in the readme from
nvidia.
I just this morning downloaded and installed
NVIDIA-Linux-x86-1.0-5336-pkg1.run from nvidia.org and it installed and
is running without any problems. I have a Riva TNT2 card
--
Kathy Wills
+
+ Gene
give the kernel loading and booting command.
I tried to do the usual root (hd0,1) and setup (hd0), and everything goes
without a glitch, but then now I always go to the grub >.
What can I try next?
BR,
This is a bug that has been reported. It is being worked on.
--
h file. Doing this actually fixed ALSA compilation error I had with SDL-1.2.6, (that was great) but the timidity++ error is still there...
Does anyone have a clue? To me it looks like an alsa problem... but that'a about all I can say :-(
See http://bugs.gentoo.org/sho
o get the message that there are errors.
Unmerging and remerging don't solve it. I've tried that already.
--
Kathy Wills
++
can create and burn cd's using the commandline for cdrecord just
fine. I tried re-emerging k3b, cdrtools and cdrdao but it didn't solve
the problem. I can't find where anyone else is having the same problem
with k3b.
Kathy Wills wrote:
I get the following error when trying to build TiMidity++:
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../timidity -I../libarc
-I../utils -I/usr/local/include -I/usr/X11R6/include
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include
-DENABLE_SHERRY -DAU_OSS
fore and I'm not understanding how to emerge the cvs version.
Do I need to create an ebuild for the cvs version before it will use the
cvs version? I tried creating a tar.bz2 out of the cvs of timidity.
Emerge still wants to use the one that does not build. I'm not sure what
I&#x
noro
I had the same problems when I tried using wvdial. I tried everything I
could find in the wvdial manuals, faqs, and from searching the web.
Nothing worked to solve it. I ended up installing kdenetwork so I could
use kppp and had no problems with it. I no longer use dialup now as I
hav
same thing. I'm getting the
same mjpeg errors you are. Instead of the g-wrap one, I'm getting one
about libcdio. I've searched everywhere and even asked in one of the
forums and can't find an answer on how to solve these error messages.
Everything seems to be working jus
Kathy Wills wrote:
Robert Crawford wrote:
On Saturday 17 January 2004 6:17 am, Dennis Robertson wrote:
All my 2.6 kernels have worked great, except for cdburning. I've read
everything I can find, followed all the instructions, and nothing has
worked for k3b. At least on my system, cdbu
ernel from www.kernel.org installed, and configured
without scsi emulation. I am using all the latest of cdrao , etc. My
use flag is "~x86"
--
Kathy Wills
+
+ Gene
Thomas Degris wrote:
How do you do if you are using DHCP ?
Thanks,
Thomas
Kathy Wills wrote:
Davide Brini wrote:
1) When will the latest stable kernel be considered "stable" for gentoo
(eg,
when will something like "vanilla-sources-2.6.x" be available)?
2) I put \O (u
hostname contains only my machine name
my /etc/dnsdomainname contains the domain name.
--
Kathy Wills
+
+ Genealogy Web Site: http:/
Tianran Chen wrote:
On Sun, 11 Jan 2004, Redeeman wrote:
try:
Option "Protocol" "ImPS/2"
Thanks for replying.
I had already tried it, but it still does not work.
--
[EMAIL PROTECTED] mailing list
I have to use /dev/input/mice for my optical usb mouse to w
I am having trouble compiling gtkglarea which is needed for eroaster. It
is looking for gl.h and glx.h. Gle which is needed for xscreensaver is
looking for gl.h and glu.h. It is my understanding that these are part
of Opengl which is normally supplied by Mesa. I have an nvidia card with
the pac
Modem Type = Analog Modem
Phone = *70,correctphonenumber
Username = userid
Password = password
Help would be greatly appreciated as I am having trouble doing
"emerge-webrsync" because of this. I can't do "emerge rsync" for some
reason that I haven't been able to resolve
/xfree-4.3.0-r3 failed.
!!! Function src_install, Line 590, Exitcode 2
!!! (no error message)
Everything else I've tried so far has emerged with no problem. If you
have tried to emerge xfree86 using the linux-headers-2.6.0-test11, have
you found a way to solve this error? If so what did you do?
Kathy Wills
--
[EMAIL PROTECTED] mailing list
uot; or
added
"\O" to the existing /etc/issue file?
Thanks,
JBanks
I edited /etc/issue and replaced the \o with \O and returned to using
the /etc/dnsdomainname and it worked. The (none) is no longer there when
Marius Mauch wrote:
On 12/12/03 Kathy Wills wrote:
It has \o.
\o is for NIS domainname, use \O to get the DNS domainname.
Marius
OK, that explains why it wasn't working for me when I was using
/etc/dnsdomainname. I'll change it and go back to using that and not
Marius Mauch wrote:
Does your /etc/issue have a \O or \o ?
Marius
It has \o.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com
/dnsdomainname was with the /etc/hostname was when I was getting the
(none) after the other in the console. Doing what I said got rid of the
(none).
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com
rom the link to /bin/domainname, if you use
/etc/nisdomainname instead of /etc/dnsdomainname the (none) goes away
and the name shows up correctly if you have just the machine name in
/etc/hostname and the domain name in /etc/nisdomainname. In my case, it
shows up as machinename.domainn
It is a link to /bin/hostname. It
opened /bin/hostname in an editor and scrolled down to the wording it
looks like maybe (none) should refer to nisdomainname or ypdomainname.
I'm going to try it when I reboot again and see it that resolves it
without having to do th
Joshua Banks wrote:
--- Kathy Wills <[EMAIL PROTECTED]> wrote:
Yes, the /etc/host file is and has been correct so that is not the
answer.
Is "/etc/resolv.conf" empty?
JBanks
No, /etc/resolv.conf is correct so is /etc/hostname and /etc/dnsdomainname.
me but
it works fine, so I left it alone.
Hope that helps.
Sections 19 and 20 of the install guide show examples.
Yes, the /etc/host file is and has been correct so that is not the answer.
--
Kathy Wills
+
+ Genealogy Web Site:
hostname and dnsdomainname files. The
/etc/init.d/domainname is started when I boot. Is this possibly because
I only have eth0 and no eth1 or did I miss something when I did the
network configuration?
--
Kathy Wills
k now. I filed a bug
report. Using emerge-webrsync works just fine. I haven't been able to
find out what it means either. Using emerge sync doesn't even work with
my Smoothwall shut down. I would rather use emerge sync because it seems
faster than em
ve not found anything that works.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group Web Site: http://www.tsgin
from one to the other. I've tried everything I can find
on the forums and by doing a google search.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywills
he Outlook address book.
So, if any of you out there are using MS Lookout... I mean Outlook...
without a virus scanner, shame on you.
BTW: I haven't looked at the archives, but are the e-mail addresses
being munged?
--
[EMAIL PROTECTED] mailing list
Is anyone else having problems with emerge sync timing out while
receiving file list? I have tried several times this evening and it goes
through the three tries and times out at each one.
--
Kathy Wills
+
+ Genealogy Web Site
Jason Stubbs wrote:
On Friday 28 November 2003 11:44, Kathy Wills wrote:
Jason Stubbs wrote:
Same here but I seem to remember something about docbook-xml version.
Yes, we are talking about the same thing. I'm in the process of filing
an bug report with Quanta. I'll re
ied it via ./configure and make and it still creates the same
error.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Grou
sage about it. So I
don't have a clue.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group
ta-3.2.0_beta1/work/quanta-3.1.93'
make: *** [all] Error 2
!!! ERROR: app-editors/quanta-3.2.0_beta1 failed.
!!! Function kde_src_compile, Line 137, Exitcode 2
!!! died running emake, kde_src_compile:make
--
Kathy Wills
. It doesn't seem like an
orbit problem. That is why orbit doesn't provide what you need. I found
bug reports on this same problem here
http://bugzilla.ximian.com/show_bug.cgi?id=46130
--
Kathy Wills
+
+ Genealogy Web Si
atic scripts in place, according
to the installation instructions.
I'm open to suggestions.
Thanks again for your help.
Harlan...
I'm fresh out of ideas. Check this out and see if can get some help
http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutoria
egarding this in /var/log/cups?
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group Web Site: http://www.t
here http://www.linuxprinting.org/cups-doc.html
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group Web Site: http://www.t
DE 3.2 is considered stable and just go ahead
with 3.1.4 until then. Thanks anyway.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+
.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374
d
version.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group Web Site: http://www.tsginfo.com/index.php
he betas?
I followed the gentoo alsa guide when I set up alsa. I have emerged
everything alsa related except for the alsamixergui and alsa player.
Alsa itself is working.
--
Kathy Wills
+
+ Genealogy
Dave Naylor wrote:
http://www.gentoo.org/doc/en/alsa-guide.xml >
This was the guide that I used to set alsa up. So I knew about this
guide and have it printed out.
--
Kathy Wills
+
+ Genealogy Web Site: h
back to the default ebuild and it built just fine with
alsa support disabled.
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+
. My question is why can they Slackware developers get it
working when there are all sorts of problems getting it working with
Gentoo? I have a soundblaster live card and everything works just fine.
--
Kathy Wills
+
+ Genealogy
Ernie Schroder wrote:
On Wednesday 12 November 2003 08:38 pm, Kathy Wills wrote:
Norbert Kamenicky wrote:
Kathy Wills wrote:
I have tried the following in my fstab file:
/dev/fd0 /mnt/floppy ext3users,ro 0 0
and
/dev/floppy /mnt/floppy ext3 users,ro 0 0
Of course
he "users" option exists. Both allow any user to mount the device. The
difference is that "users" will allow any user to unmount the device whereas
"user" will only allow the mounting user to unmount it.
Jason
Thanks, Jason, I had used u
Norbert Kamenicky wrote:
Kathy Wills wrote:
I have tried the following in my fstab file:
/dev/fd0 /mnt/floppy ext3users,ro 0 0
and
/dev/floppy /mnt/floppy ext3 users,ro 0 0
Of course, it has the proper spacing in the actual file. I keep
getting the message that it is not a block
DB Wong wrote:
--- Kathy Wills <[EMAIL PROTECTED]> wrote: > I have tried the
following in my fstab file:
/dev/fd0 /mnt/floppy ext3users,ro 0 0
and
/dev/floppy /mnt/floppy ext3 users,ro 0 0
Of course, it has the proper spacing in the actual file. I keep getting
the mes
doing wrong?
--
Kathy Wills
+
+ Genealogy Web Site: http://www.kathywillsfamily.com +
+ +
+ Summit Group Web Site: http://www.tsginfo.com/index.php?rc
Ermanno Poggi wrote:
make: *** [all} Error 2
!!! ERROR: kde-base/kdemultimedia-3.1.4-r1 failed.
!!! Function kde_src_compile, Line 137, Exitcode 2
!!! died running emake, kde_src_compile make
How do I solve this so I can resume emerge world?
Kathy
'/var/tmp/portage/kdemultimedia-3.1.4-r1/wo
While compiling kdemultimedia during emerge world, I get the following
error:
/usr/include/asm/byteorder.h:38: syntax error before '(' token
/usr/include/asm/byteorder h:42: '_u64' is used as a type, but is not
defined as a type.
/usr/include/asm/byteorder h;43: syntax error before '}' token
/us
with the alsa?
I will be doing a stage 3 install to start with as my husband would be
hard to live with if he has to go for more than a day or so without
internet.
--
Kathy Wills
+
+ Genealogy Web Site: http
gabor wrote:
| Because devfs is been removed from future kernels?
|
and why was it removed?
is there a better thing than devfsd?
The kernel developers are making plans to change from devfs to udev.
Udev is still in the development process. It will work much the same way
as devfs.
--
Kathy
newest drivers and files from the alsa
website. The latest version is 9.8. I'm using the vanilla kernel 2.4.22
from www.kernel.org.
--
Kathy Wills
+
+ Genealogy Web Si
83 matches
Mail list logo
