Not able to login to TSO

Hello, We are facing issue in TCPIP profile of z/OS 1.7. I am not able to login into TSO. There is much difference in coding of z/OS 1.7 and z/OS 1.9 profile.Our rest of the system like z/OS 1.9 , z/OS 1.10 etc tcpip are working fine. I tried research to see, if any error occur

Group Capacity

Within the same Group Capacity can I include a LPAR which is hardcapped (traditional PR/SM) rather than via Defined Capacity ? Manual specifies WLM will dynamically remove such partitions from the group and manage the remaining partitions towards the group limit. What I'm curious is if the utili

Re: assembler help!

At 21:52 -0500 on 08/04/2011, Bill Godfrey wrote about Re: assembler help!: On Thu, 4 Aug 2011 21:50:24 -0400, Robert A. Rosenberg wrote: At 11:03 -0400 on 08/04/2011, van der Grijn, Bart (B) wrote about Re: assembler help!: I believe Anne mentioned something about PARMJOBC containing the

Re: How to get Operator Log

Hello, 1) For me the operator log was the system log in which the VM guest are running. We run all our MVS guest under MVSCONS user id. We defined only one console for all MVS guest, so that we can start all virtual machine from this ID. Sorry, If I have confused anybody. 2) Basically I was looki

Re: assembler help!

On Thu, 4 Aug 2011 21:50:24 -0400, Robert A. Rosenberg wrote: >At 11:03 -0400 on 08/04/2011, van der Grijn, Bart (B) wrote about Re: >assembler help!: > >>I believe Anne mentioned something about PARMJOBC containing the address >>to a field with x0..08, rather than the actual value. >> >>Looking

Re: assembler help!

At 11:03 -0400 on 08/04/2011, van der Grijn, Bart (B) wrote about Re: assembler help!: I believe Anne mentioned something about PARMJOBC containing the address to a field with x0..08, rather than the actual value. Looking at the TWS supplied code on our system, that seems to match. It has: L

Re: Source code to Milten, Orvyl, & Wylbur is here.

In , on 08/04/2011 at 01:37 PM, "McKown, John" said: >Subject: Source code to Milten, Orvyl, & Wylbur is here. Stanford? SLAC? RAND? Other? -- Shmuel (Seymour J.) Metz, SysProg and JOAT ISO position; see We don't care. We don't have

Re: CORRUPT PDS - I/O ERROR

In <4e395e34.1070...@bcs.org.uk>, on 08/03/2011 at 03:41 PM, CM Poncelet said: >But I should get *no* I/O error at all on read if the DCB precedence >rules for output apply also to input, False. In <4e396dcd.60...@bcs.org.uk>, on 08/03/2011 at 04:48 PM, CM Poncelet said: >But I do not

Re: CORRUPT PDS - I/O ERROR

In <4e397247.7070...@bcs.org.uk>, on 08/03/2011 at 05:07 PM, CM Poncelet said: >The absurd consequences are that 'FB,90' records would have to be >read as 'FB,80' records and the last record in the block padded with >X'00's That is not a consequence, absurd or otherwise. In <4e3975b7.4030.

Re: S/A Dump issue

In , on 08/03/2011 at 09:46 AM, John Norgauer said: >Now, after a few weeks have passed and having re-create the S/A dump >after getting the same Wait state , IPCS is unable to locate the >CVT. Is the PSA in the dump? -- Shmuel (Seymour J.) Metz, SysProg and JOAT ISO position; s

Re: CORRUPT PDS - I/O ERROR

In <4e3a4e7e.5090...@bcs.org.uk>, on 08/04/2011 at 08:47 AM, CM Poncelet said: >I proved that, if "On input, the order of override priority is >program DCB -> JCL DCB -> dataset attributes", then the consequence >is an I/O error Not only did you not prove that, but others gave examples of su

Re: How to get Operator Log

In , on 08/03/2011 at 11:07 PM, saurabh khandelwal said: > Our MVS Guest's crash abruptly, the only message about >it's reason is in zVM's Operator's Log, because these MVS are >running under. I really doubt that MVS is running on OPERATOR. Check with your VM systems programmer as to what VM

Re: assembler help!

In <01a401cc52f5$570e93a0$052bbae0$@us>, on 08/04/2011 at 05:24 PM, Jim Thomas said: >Forgive me ... I'm confused ... I don't see the connection. In fact, >as far as I'm concerned ... why even bother with HLASM vs. sticking >to straight good old fashioned tested and true assembler ??. SOAP2

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Hi Dave, You hit the jackpot on this. I got it resolved. Thank you so much. Regards Lim ML On 05/08/11 12:59 AM, Gibney, Dave wrote: Starting with: WHEN (&HLQ =&ZFS_HLQ) /* MANAGE MULTI VOLUME ZFS DATA SETS It's all comment until the */ on the last line. Dave Gibney Information Technology

Re: assembler help!

Sir, Forgive me, I honestly did not mean to insult you. In fact, I concur with you, only, I meant that to bring up the topic of how MVS is put down constantly and if we have to take an outage, we have (just about) hell to pay but by the same token, if you have to reboot a server ... it's just n

Re: CORRUPT PDS - I/O ERROR

In <4e394150.1070...@bcs.org.uk>, on 08/03/2011 at 01:38 PM, CM Poncelet said: >Well yes, they have to be loaded into VS to be processed. In the case >of block read/writes they precede the data records in the buffer. >But whatever was being discussed at the time I wrote that had to do >with

Re: CORRUPT PDS - I/O ERROR

In , on 08/03/2011 at 12:16 PM, "Chase, John" said: >IOW, to perfect the DWIM macro? :-) I believe that he wants the DWIWHMHIUWIWTA macro. -- Shmuel (Seymour J.) Metz, SysProg and JOAT ISO position; see We don't care. We don't have

Re: assembler help!

In <897c82fc69765d45a301af8f5d1210cb023ea55...@otb6mail01.executive.stateofwv.gov>, on 08/04/2011 at 10:20 AM, "Crabtree, Anne D" said: >I realize I'm not asking the smartest questions... PARMJOBC is an >address and at that address is the value 0008 (I think). If PARMJOBC is supposed to

Re: assembler help!

In , on 08/04/2011 at 11:03 AM, "van der Grijn, Bart (B)" said: >I believe Anne mentioned something about PARMJOBC containing the >address to a field with x0..08, rather than the actual value. Even if she meant that it contained the address of 00 00 00 08, the ICM would not load a value of 8

Re: assembler help!

In , on 08/04/2011 at 01:28 PM, "Robert A. Rosenberg" said: >That depends on what the person's job function is supposed to be. If >it is to maintain system exits, an adequate knowledge of assembler >language skills (or at least enough reading comprehension to >understand the PoP manual's de

Re: assembler help!

In , on 08/04/2011 at 09:16 AM, "Barkow, Eileen" said: >A mask of 7 loads the low order 3 bytes, so that r1 would contain >whatever the high order byte it contained originally plus 08 No; R1 would contain whatever high order byte it contained originally plus the three bytes at location 0

Re: assembler help!

In <897c82fc69765d45a301af8f5d1210cb023ea55...@otb6mail01.executive.stateofwv.gov>, on 08/04/2011 at 09:02 AM, "Crabtree, Anne D" said: >ICM R1,7,0(R2) >If PARMJOBC contains a binary integer length of 4 with 00 00 00 08, >what ends up in all bits of R1? Bits 0-7 unchanged, bits 8-31 the c

Re: assembler help!

Jim, The ctrl-alt-delete in Window is the load option in our world. We invented it, so Its quicker! And faster. Ed -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the

Re: Does this apply to some of the messages here?

I agree !! ... :-) Kind Regards Jim Thomas 617-233-4130 (mobile) 636-294-1014(res) j...@thethomasresidence.us (Email) -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Rick Fochtman Sent: Thursday, August 04, 2

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

I just woke up in the morning, and found so many replies on this issue I raised. This is a wonderful forum list, I learn a lot from here, considered just joined days ago. Thank you to all the guys here. Much obliged. Regards Lim ML On 05/08/11 5:20 AM, Scott Rowe wrote: Ah, but I prefer to hav

Re: assembler help!

- NO Why? Because we're too cheap to license the C compiler. We do have HLASM. Now, if they want to make the C/C++ come for free, I'd jump for joy. We had a license at one time. But a manager who was struggling to save

Re: Does this apply to some of the messages here?

-- - Too many #%$# lawyers with too much "free" time and too little to do. But on the "positive" side (ever the optimist), perhaps it's the beginning of an effort

Re: assembler help!

Sir/s ... Forgive me ... I have a completely different take on this and again forgive me if I'm about to 'rock the boat'. Why not 'train' them ?. I realize (and have seen the underlying 'supposed' 'business' reasons) that some of our old timer skills are dwindling but .. I still do not see th

Re: assembler help!

I realize I'm not asking the smartest questions... PARMJOBC is an address and at that address is the value 0008 (I think). To be honest, I can't even figure out where it is getting PARMJOBC. I'm basing the assumpti

Re: assembler help!

- In our IEFACTRT (accounting exit), an assembler program, it has the following commands: L R2,PARMJOBC > R2 now contains PARMJOBC, X'0008' ICM R1,7,0(R2)

Re: assembler help!

Ummm ... dare I say ... 'free products' mean that management (and CxO's) cannot justify their positions and cannot 'piss and moan' about costs ??. :-) Kind Regards Jim Thomas 617-233-4130 (mobile) 636-294-1014(res) j...@thethomasresidence.us (Email) -Origina

Re: assembler help!

Sir, Forgive me ... I'm confused ... I don't see the connection. In fact, as far as I'm concerned ... why even bother with HLASM vs. sticking to straight good old fashioned tested and true assembler ??. I'll have a 'rant' posted shortly. Kind Regards Jim Thomas 617-233-4130 (mob

Re: "programmable SYSOUT" (was: dynamic STEPLIB)

In <1312392325.46164.yahoomail...@web65513.mail.ac4.yahoo.com>, on 08/03/2011 at 10:25 AM, Scott Ford said: >Yep, Shmuel we have a couple customers asking for a 'generic' wilbur >or roscoe type interface. It amazes me that people are still using >Wilbur or Roscoe.. The associative range const

assembler help!

It is clear from this and other examples we have seen here that 1) the assembly-language sklls of most installation sysprogs under 50 are rudimentary 2) IBM's maintenance of the HLASM interfaces to system services has low priority and is deteriorating, chiefly because the PL/X interfaces are the

Re: assembler help!

Sir, No such thing ... please do not put yourself down. If you need assistance, please let me know and I'd be happy to try and help. Kind Regards Jim Thomas 617-233-4130 (mobile) 636-294-1014(res) j...@thethomasresidence.us (Email) -Original Message- From:

Dino Software RTD Product

We are thinking about getting the RTD product from Dino Software. Does anyone have any good or bad experience with the product? Offlist if fine if you prefer. Bobby Herring Systems Programmer Texas Farm Bureau Insurance Companies Waco, TX CONFIDENTIALITY STATEMENT: The foregoing message (includ

Re: assembler help!

I can't help you with that question, since I don't use C myself. I just thought it was interesting that you keep complaining about not having a C compiler due to funds, yet there is a free one out there. I thought I saw some messages recently talking about it being relatively up to date. On Thu,

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Ah, but I prefer to have a WRITE at the bottom of the routine to show what was assigned every time the routine is executed, and EXIT statements prevent you from having that. On Thu, Aug 4, 2011 at 3:27 PM, Darth Keller wrote: > >>I would like to add the following observation: > >>Why use a SELECT

Re: Source code to Milten, Orvyl, & Wylbur is here.

On 8/4/2011 2:37 PM, McKown, John wrote: I vaguely remember using these in college on MVT. The actual HLASM source is available. It's liberally licensed in a MPL type license. Now, this is not likely of much use to us here. But if you're running MVS 3.8j or MVT on Hercules/390, this might be of s

Re: assembler help!

You indicated subsequently that you clear R1 previously and that PARMJOBC points to (instead of contains) X'0008'. With a mask of 7, the ICM instruction leaves byte 0 of R1 unchanged and loads bytes 1-3 with bytes 0-2 of the effective address. The net result in R1 is byte 0: X'00' unchan

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

My personal preference, for what it's worth, is to follow IBM's examples. They appear to prevent "re-assignments later" by coding only one SELECT statement and use EXIT only for errors. They also use indenting and commenting for readability and understandability. Greg Shirey Ben E.

Re: Not able to Access OMVS

Yes, There was a problem with directory. someone by mistake has deleted it . So because of this I got this error. Thanks every one to help me . Regards Saurabh On Fri, Aug 5, 2011 at 1:57 AM, George, Kevin A wrote: > You need to have a directory in the /u named tec1008. Normally this is done >

Re: Not able to Access OMVS

The message clearly indicates that the directory /u/tec108 does not exist. Have someone with the proper authority create the directory /u/tec108 Rob Schramm Senior Systems Consultant Imperium Group On Thu, Aug 4, 2011 at 4:28 PM, Hal Merritt wrote: > Does the file exist? > > > > > -Orig

Re: Not able to Access OMVS

You need to have a directory in the /u named tec1008. Normally this is done using automount and a ZFS for your file system. - Kevin George U.S. Office of Personnel Management 1900 E Street NW Room BH04L Washington, DC 20415 (202) 606-1195 - Main (202) 528-8215

Re: Not able to Access OMVS

Does the file exist? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of saurabh khandelwal Sent: Thursday, August 04, 2011 3:22 PM To: IBM-MAIN@bama.ua.edu Subject: Not able to Access OMVS Hello, I am not able to login to OMVS.

Not able to Access OMVS

Hello, I am not able to login to OMVS. I am getting below error. Function = chdir(), directory name = '/u/tec1008', return value = -1, errno = 12 9 (X'0081'), reason code = 05190050, message = 'EDC5129I No such file or dir ectory.' FSUM2331 The session has ended. Press to en

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

>>I would like to add the following observation: >>Why use a SELECT structure, and then use >> DO >> SET &STORGRP = '' >> EXIT >> END >>When you could code it more like this: >>SELECT >> WHEN (&HLQ = &HSM_HLQ) /* MANAGE MULTI VOLUME HFS DATA SETS */ >> SET &STORGRP

Re: assembler help!

I'm too stupid to figure out how to install it. But that was a few years ago. It the z/OS version maintained? Or is it like other GNU software that gets on z/OS - out of date and not actively kept in sync with the Linux version. -- John McKown Systems Engineer IV IT Administrative Services Gro

Re: assembler help!

John, Why not use GCC? On Thu, Aug 4, 2011 at 2:44 PM, McKown, John wrote: > But not at a cost of $0.00. We're still in "lock down" mode. We seem to be > doing better as a company, but there is still a push to keep costs at a > minimum. Some day, I may look at relicensing your C, C++, and assemb

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

> > > But in Storage Group ACS routine as below; > > > > > > PROC STORGRP > > > /** > > > / > > > FILTLIST HSM_HLQ INCLUDE('HFS1') > > > FILTLIST ZFS_HLQ INCLUDE('ZFS') > > > FILTLIST HS1_HLQ INC

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Right, and translation won't be successful. Therefore, it won't activate. Greg Shirey Ben E. Keith Company -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Gibney, Dave Sent: Thursday, August 04, 2011 12:00 PM To: IBM-MAIN@bama.ua.ed

Re: assembler help!

Oh, you're right. I was thinking "instead of" and not "in addition to". My bad. -- John McKown Systems Engineer IV IT Administrative Services Group HealthMarkets(r) 9151 Boulevard 26 * N. Richland Hills * TX 76010 (817) 255-3225 phone * john.mck...@healthmarkets.com * www.HealthMarkets.com C

Re: assembler help!

But not at a cost of $0.00. We're still in "lock down" mode. We seem to be doing better as a company, but there is still a push to keep costs at a minimum. Some day, I may look at relicensing your C, C++, and assembler for my home Linux system to do cross-compiles. I had them licensed some years

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Good catch Dave. I would like to add the following observation: Why use a SELECT structure, and then use DO SET &STORGRP = '' EXIT END When you could code it more like this: SELECT WHEN (&HLQ = &HSM_HLQ) /* MANAGE MULTI VOLUME HFS DATA SETS */ SET &STORGRP =

Re: assembler help!

On 8/4/2011 11:27 AM, McKown, John wrote: NO Why? Because we're too cheap to license the C compiler. We do have HLASM. Now, if they want to make the C/C++ come for free, I'd jump for joy. We had a license at one time. But a manager who was struggling to save his job decided that eliminating

Source code to Milten, Orvyl, & Wylbur is here.

I vaguely remember using these in college on MVT. The actual HLASM source is available. It's liberally licensed in a MPL type license. Now, this is not likely of much use to us here. But if you're running MVS 3.8j or MVT on Hercules/390, this might be of some interest. http://www.stanford.edu/d

Re: assembler help!

McKown, John wrote: NO Why? Because we're too cheap to license the C compiler. We do have HLASM. Now, if they want to make the C/C++ come for free, I'd jump for joy. We had a license at one time. But a manager who was struggling to save his job decided that eliminating all "non-critical"

Re: assembler help!

NO Why? Because we're too cheap to license the C compiler. We do have HLASM. Now, if they want to make the C/C++ come for free, I'd jump for joy. We had a license at one time. But a manager who was struggling to save his job decided that eliminating all "non-critical" software was the way to

Re: How to get Operator Log

Thanks all of you to resolve my problem. Thanks once again.. Regards Saurabh On Thu, Aug 4, 2011 at 11:47 PM, Bryan Klimek wrote: > What is the userid of the MVS machine in the CP Directory? For > demonstration purposes, assume M060404 is your virtual machine user name in > the CP Directory. F

Re: How to get Operator Log

What is the userid of the MVS machine in the CP Directory? For demonstration purposes, assume M060404 is your virtual machine user name in the CP Directory. From an authorized user (OPERATOR) type the following commands: CP QUERY M060404 HCPXQY0

Re: assembler help!

At 09:17 -0700 on 08/04/2011, Edward Jaffe wrote about Re: assembler help!: Many have asserted that assembler language skills are inadequate to properly maintain 21st-Century z/OS systems. Would it be better if IBM provided sample exits in METAL C? That depends on what the person's job funct

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Starting with: WHEN (&HLQ = &ZFS_HLQ) /* MANAGE MULTI VOLUME ZFS DATA SETS It's all comment until the */ on the last line. Dave Gibney Information Technology Services Washington State University > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu

Re: Does this apply to some of the messages here?

Yeah...especially since the other two are already dead. Sorry, just couldn't resist. ;) -- Donald Grinsell State of Montana 406-444-2983 dgrins...@mt.gov "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin -

Re: NOT Running DFHSM on an LPAR

On Wed, 3 Aug 2011 14:05:47 -0400, John Eells wrote: >Lizette Koehler wrote: >> I have 5 LPARS currently running DFHSM. I have just added a Sixth LPAR >> where we do not want to run DFHSM due to constraints we are placing on this >> LPAR. >> >> I ran a test on what would happen with DFHSM not r

Re: Does this apply to some of the messages here?

On Tue, 2 Aug 2011 16:36:54 -0500, Rick Fochtman wrote: >- >Too many #%$# lawyers with too much "free" time and too little to do. > >But on the "positive" side (ever the optimist), perhaps it's the >beginning of an effort to demonstr

Re: assembler help!

On 8/4/2011 6:02 AM, Crabtree, Anne D wrote: In our IEFACTRT (accounting exit), an assembler program, it has the following commands: L R2,PARMJOBC ICM R1,7,0(R2) If PARMJOBC contains a binary integer length of 4 with 00 00 00 08, what ends up in all bits of R1? I am trying to add addit

Re: Time On Mainframe Emails

Almost anywhere in the file. I have mine about 5 lines in. Be aware. My prior post was based on the HW clock being set to GMT. The desired value is the "timezone offset" In the case that the HW clock is set to GMT, I would probably use EST5EDT. The "5" can be adjusted up or down to yield the corr

Re: Time On Mainframe Emails

agreed Al Staller | Z Systems Programmer | KBM Group | (Tel) 972 664 3565 | allan.stal...@kbmg.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Scott Rowe Sent: Thursday, August 04, 2011 9:33 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Ti

Re: assembler help!

See sys1.samplib(ieeactrt) for doc on the parameter lists, I realize I'm not asking the smartest questions... PARMJOBC is an address and at that address is the value 0008 (I think). To be honest, I can't even figure out where it is getting PARMJOBC. ---

Re: IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Your validate seems to be indicating that this code is not actually part of your translated routines. I'd say that either - 1. This code was never actually translated to the SCDS that you are using for this Validate . 2. Your code actually ends before this section. Take a close look at the

Re: ISPF ZPFSHOW Variable

LVLINE is a function that can be used to set a variable. Several years ago I tested it extensively and it always returned an accurate value for the number of visible lines. This is true regardless of where the screen is split, or whether PFSHOW is on or off, or whether the SWAPBAR is being displ

IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE

Hi, I am new in DFSMS, trying to do a validate against my SCDS, got a warning msg IGD06023I STORAGE GROUP ZFSCLASS IS NOT REFERENCED BY THE STORAGE GROUP ACS ROUTINE But in Storage Group ACS routine as below; PROC STORGRP /

Re: ISPF ZPFSHOW Variable

LVLINE is a panel function rather than a variable and it does not seem to be usable for this purpose. The manual says that the value may not be correct depending on the command line being at the bottom of the screen, the PF key display and the SPLIT status. Its purpose seems to be more related to

Re: assembler help!

On Thu, 2011-08-04 at 10:20 -0400, Crabtree, Anne D wrote: > If anyone is using IEFACTRT to do chargeback and is using multiple > SMF30 cpu type fields in the calculation(ie. SMF30ICU, SMF30IIP, > SMF30_TIME_ON_IFA, etc...) I'd love to see how you did it. The > production version only looks at SM

Re: assembler help!

I believe Anne mentioned something about PARMJOBC containing the address to a field with x0..08, rather than the actual value. Looking at the TWS supplied code on our system, that seems to match. It has: L DRKR2,PARMJOBC LOAD ADDR OF JOB CPU TIME ICM DRKR1,K7,K0(DRKR2) LOAD JOB CPU

Re: Time On Mainframe Emails

In a specific location of file rc? * * *George Rodriguez* *Specialist II - IT Solutions* *Application Support / Quality Assurance* *PX - 47652* *(561) 357-7652 (office)* *(561) 707-3496 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-332* *West Palm Beach, FL. 3340

Re: assembler help!

> -Original Message- > From: IBM Mainframe Discussion List On Behalf Of Crabtree, Anne D > > In our IEFACTRT (accounting exit), an assembler program, it has the following commands: > > L R2,PARMJOBC > ICM R1,7,0(R2) > > If PARMJOBC contains a binary integer length of 4 with 00 00 0

Re: ISPF ZPFSHOW Variable

I have also been frustrated by this same issue of ZPFSHOW not reflecting the real PFSHOW state. I have a rexx application (a BMS map editor) that needs to determine the state of PFSHOW and SWAPBAR, because I want to temporarily turn them off (for a "full screen" display) then restore them back to

Re: Time On Mainframe Emails

I don't know that I would recommend that unless he gets his TOD clock set to the proper UTC time. On Thu, Aug 4, 2011 at 8:28 AM, Staller, Allan wrote: > Add the following to /etc/rc and /etc/profile > > TZ=desired value > export $TZ > > HTH, > > > Is there something I should be changing in USS?

Re: assembler help!

I realize I'm not asking the smartest questions... PARMJOBC is an address and at that address is the value 0008 (I think). To be honest, I can't even figure out where it is getting PARMJOBC. I'm basing the assumption on the SMF record I dumped for the job that I ran that uses the exit.

Re: assembler help!

Sorry! I meant SR R1,R1 ... typo Anne D. Crabtree System Programmer WV Office of Technology Data Center 1900 Kanawha Blvd East Charleston, WV 25305 (304)558-5914 ext 58292 (304)558-1441 fax -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf O

Re: ISPF ZPFSHOW Variable

Variable LVLINE holds the last visible line of an area. If you know where the area start on your panel, it is easy to know screen depth. ITschak On Thu, Aug 4, 2011 at 4:25 PM, Chuck Arney wrote: > In an assembler ISPF application I am trying to adjust the size of a > dynamic > screen area base

Re: ISPF ZPFSHOW Variable

Use LVLINE (Last Visible LINE) in the panel. This will tell you how many lines are visible, regardless of whether ZPFSHOW is on or off. HTH, Dave Salt SimpList(tm) - try it; you'll get it! http://www.mackinney.com/products/program-development/simplist.html > Date: Thu, 4 Aug 2011 08:2

Re: assembler help!

*NO* LR R1,R1 will not zero out R1. SRR1,R1 will zero out R1. Prior to the L R2,PARMJOBC, there is a LR R1,R1 which zeroes out R1 right? So, does R1 have data in it or an address? I was assuming that R1 had data in it (with leading zeroes and 8 on the end) and I'm trying to add oth

Re: assembler help!

Anne, asking this type of question on this list is ok. And a lot of the people on this list are very sharp and give excellent answers. There is another list at assembler-l...@listserv.uga.edu that just deals with assembler questions. These people are also very sharp. :) -Original Message-

Re: assembler help!

Prior to the L R2,PARMJOBC, there is a LR R1,R1 which zeroes out R1 right? So, does R1 have data in it or an address? I was assuming that R1 had data in it (with leading zeroes and 8 on the end) and I'm trying to add other values to that value. How can I do that if not the way I tried (ICM f

ISPF ZPFSHOW Variable

In an assembler ISPF application I am trying to adjust the size of a dynamic screen area based on the results of a PQUERY and the ZPFSHOW variable. But, the ZPFSHOW variable does not seem to work as expected. It appears that it is not updated with the actual state of the PFSHOW command results. A

Re: assembler help!

On 8/4/2011 7:31 AM, Steve Comstock wrote: [correcting my own post] On 8/4/2011 7:02 AM, Crabtree, Anne D wrote: In our IEFACTRT (accounting exit), an assembler program, it has the following commands: L R2,PARMJOBC ICM R1,7,0(R2) If PARMJOBC contains a binary integer length of 4 with 00 00 0

Re: assembler help!

On 8/4/2011 7:02 AM, Crabtree, Anne D wrote: In our IEFACTRT (accounting exit), an assembler program, it has the following commands: L R2,PARMJOBC ICM R1,7,0(R2) If PARMJOBC contains a binary integer length of 4 with 00 00 00 08, what ends up in all bits of R1? Unpredictable. The first

Re: assembler help!

A mask of 7 loads the low order 3 bytes, so that r1 would contain whatever the high order byte it contained originally plus 08 in the low order 3 bytes. L R2,PARMJOBC ICM R1,7,0(R2) If smf30cps contains 0001, then the first 4 bytes of wk1 would contain 0001 after the move And r

Re: assembler help!

The ICM will only replace the lower 3 bytes of R1. If there is anything in the left most byte it will not be replaced. You could try SR R1,R1 ICM R1,7,0(R2) And see if that gets you what you want. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On B

Re: assembler help!

Unpredictable! Check the high order byte of R1! ICM R1,7,0(r2) replaces the low order 3 bytes (and seems to be referencing a 24-bit address). R1 may contain residual data in the high order byte. HTH, In our IEFACTRT (accounting exit), an assembler program, it has the following commands: L

Re: DFHSM QUESTION - DELETE SDSP DSN

Alan,   Your suggestion about running the LISTCAT against the DATA component worked. For some reason the CLUSTER is called HSM.SMALLDS.VBL1908.  I will delete the cluster.  Thanks again for clearing the mystery. --- On Thu, 8/4/11, Staller, Allan wrote: From: Staller, Allan Subject: Re: DFHS

assembler help!

In our IEFACTRT (accounting exit), an assembler program, it has the following commands: L R2,PARMJOBC ICM R1,7,0(R2) If PARMJOBC contains a binary integer length of 4 with 00 00 00 08, what ends up in all bits of R1? I am trying to add additional values to what is in R1 by doing: MVC

Re: DFHSM QUESTION - DELETE SDSP DSN

Based on this, and some other subsequent posts, DEL 'component name' VVR should do the trick Yes I did.  I ran a LISTCAT of the CLUSTER and it gave me the error message;  LISTC ENT('VHSM.SMALLDS.VBL1908') ALL IDC3012I ENTRY VHSM.SMALLDS.VBL1908 NOT FOUND

Re: DFHSM QUESTION - DELETE SDSP DSN

You will never see the cluster name on the volume. 1) Check DFHSM definitions for each volume to see if SDSP is still in use. 2) To determine the cluster name " LISTCAT ENT('data component name') ALL" One of the lines in the display will show the cluster name. 3) To determine if the clust

Re: CORRUPT PDS - I/O ERROR

Agreed. This has devolved into a flame war. Boring and bothersome. -- John McKown Systems Engineer IV IT Administrative Services Group HealthMarkets(r) 9151 Boulevard 26 * N. Richland Hills * TX 76010 (817) 255-3225 phone * john.mck...@healthmarkets.com * www.HealthMarkets.com Confidentiali

Re: Time On Mainframe Emails

Add the following to /etc/rc and /etc/profile TZ=desired value export $TZ HTH, Is there something I should be changing in USS? * * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama

Re: CORRUPT PDS - I/O ERROR

Is there any chance that those of you who still have an interest in arguing this matter could take it offline and email each other directly. That way those of us who have long lost interest in this can stop being bombarded with the constant attacks you all seem to be throwing around indiscrimin

Re: DFHSM QUESTION - DELETE SDSP DSN

Mike,   Yes I did.  I ran a LISTCAT of the CLUSTER and it gave me the error message;  LISTC ENT('VHSM.SMALLDS.VBL1908') ALL IDC3012I ENTRY VHSM.SMALLDS.VBL1908 NOT FOUND  IDC3009I ** VSAM CATALOG RETURN CODE IS 8 - REASON CODE IS IGG

  1   2   >