Dear all,
Just a question regarding z/VM RACF protection of access to a minidisk.
A LINUX guest tries to access another minidisk which is protected by a RACF
profile. It is not authorized to link the minidisk and the link request
fails.
When I authorize that guest on the RACF profile the link
Dear all,
Thanks for the feedback.
1.) The VMMDISK class is NOT RACLISTED.
2.) The profile looks as stated below.
3.) I added LINADM to the permission list.
4.) Before LINADM was recycled, RACF told:
ICH408I USER(LINADM ) GROUP(SYS1) NAME(##
CLONSET4.201 CL(VMMDISK )
Dear all,
Maybe it is the wrong forum but I do have a z/OS related question:
In the documentation of the CMS pipelines there is alwas a reference that it
supports TSO z/OS as well.
However I am not able to find a clear indication if this is still the case
or it is mentioned only for historical
Thanks for the feedback. I will forward the question to my IBM
representative. Let's see what that Delivery offering means.
I read about this in the Author's Guide. I think even the Batch pipes are
not going to be further improved, There should be some sort of unsupport
ed
way as it is done in
Rob,
I would also be interested to get this code.
Florian
On Wed, 7 Jul 2010 10:41:15 -0400, Alex lba...@verizon.net wrote:
is this code available, if so from where?
Alex
- Original Message -
From: Rob van der Heij rvdh...@gmail.com
To: IBMVM@LISTSERV.UARK.EDU
Sent: Wednesday,
Dear all,
I am wondering if there is a utility available that would allow to use a
dialed screen to a VM running CMS?
As I understand, there is the possibility to make multitasking applications
under CMS. Also full screen is supported nowadays.
It would be great to have on one screen a REXX
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Florian Bilek
Sent: July 5, 2010 13:15
To: IBMVM@LISTSERV.UARK.EDU
Subject: Second screen in a z/VM CMS session
Dear all,
I am wondering if there is a utility available that would
2010 20:39:24 +0200, Kolasinski Piotr
p_kolasin...@compfort.pl wrote:
-Wiadomo¶æ oryginalna-
Od: The IBM z/VM Operating System w imieniu Florian Bilek
Wys³ano: Pn 2010-07-05 19:14
Do: IBMVM@LISTSERV.UARK.EDU
Temat: Second screen in a z/VM CMS session
Dear all,
I am wondering
Dear all,
We are intending to migrate from a DS8100 to a new DS8700 and consider to
quit with 3390-3 DASD addresses during this migration.
I remember that there was always the saying that paging devices should
reside on 3390-3 since the paging code was specially optimized for those
devices, I
PAV on paging volumes.
So, for high paging rates, the more volumes the better.
Kris Buelens
2010/6/21, Florian Bilek florian.bi...@gmail.com:
Dear all,
We are intending to migrate from a DS8100 to a new DS8700 and consider
to
quit with 3390-3 DASD addresses during this migration.
I
Hi Mike,
Thank you for this information. As you say, I am concerned to modify and/
or
use features from pipes that are not in the original delivery. We had
already bad experiences using features not clearly supported by IBM in
operational environments. So we are quite reluctant to use other
Scott,
Thank you for that hint. That sample does exactly what I wanted to do. I
must say that I am a little bit overwhelmed with the functionality of spe
c.
It has great functionality.
Kind regards,
Florian
/second/,
! console,
?t:,
! literal /third/,
!console
return
--
Best regards
Florian Bilek
Dear all,
I wonder if there is a way that would allow to address a specific LINUX
userid on an LINUX guest under z/VM by RSCS.
To my understanding it is possible to address a system and a user from
external system (such as z/OS) that would result in a z/VM system id and a
VM user/guest running
other things in the NETDATA header.
2009/10/15 Florian Bilek florian.bi...@gmail.com
Dear all,
I wonder if there is a way that would allow to address a specific LIN
UX
userid on an LINUX guest under z/VM by RSCS.
To my understanding it is possible to address a system and a user fro
m
Kris,
When DEST will be extractable, that would be perfect.
Thank you.
Kind regards,
Florian
Dear all,
I have the following situation on my z/VM system:
There is a switch VMSWI1 to this switch all the LINUX systems and the z/VM
stack is connected.
The network is 151.100.1.0/24
VSWITCH SYSTEM VMSWI1 Type: VSWITCH Connected: 17 Maxconn: INFINITE
PERSISTENT RESTRICTED
Dear all,
I need to establish several PPRC pairs between two DS-8000 at our local site
for our z/VM system.
There is a lot of information around about this matter but unfortunately it
is still not totally clear to me, if there are native z/VM commands for
manageing the PPRC pairs or do I need to
Hi Kris,
Thank you. That would be great.
Kind regards,
Fox
Dear all,
I am wondering about the reaction of z/VM in case it would lose one or two
page datasets.
The reason is that I have a configuration with two DS-8000 where the page
datasets are spread all over those two machines.
DS-1 has the sysres, spool, and some page datasets and DS-2 it has
Hello Steve,
Thanks for answering my question. I checked it out.
The MINIOPT after a LINK statement does not work as MINIOPT is according
to
the CP Planning and Administration guide an extension to the MDISK direct
ory
statement. Furthermore it cannot be coded in a PROFILE statement in the C
P
CLONSET 201 under another LINUX guest:
USER CHARLIE 1G 2G G
.
LINK CLONSET1 201 201 RR
User Charlie has no PAV ALIASES for the linked devices.
Is it possible to get pav aliases also for linked minidisks?
Thanks in advance.
--
Best regards
Florian Bilek
Would be interesting to format an USB device in ECKD mode. Is this possible
??? ;-)
Probably that goes only together with an FICON attached USB-Reader costing
only 250.000$ allowing for ONE USB stick at a time. Great ;-)
--
Best regards
Florian Bilek
Dear all,
Due to historical reasons we run our host systems on local time (CET/CETS =
EAST +1h/+2h). Well, all the years this served well but due to some services
that require UTC we have to change now to UTC. In a first stage we would
like to run only those services necessary with UTC.
In
Hello Rob,
That's working. Thanks a lot.
Regards,
Florian
Dear all,
I am planning to setup RACF in a CSE environemnt. The CSE is on two
different processors. I have read in the Program Directory that in this c
ase
the RACF database mustn't be on a CSE formatted volume since it uses real
reserve/release CCWs. Therefore I can put it only on a real
Dear all,
Thanks a lot for this real quick answers. Have hoped to avoid a
reconfiguration of the storage subsystem.
Seems there would be some room for future enhancement of this issue ;-)
Best regards,
Florian
Alan, Kris,
Thank you very much indeed for your explanations.
I switched to 924 code page and now the C-source from the IVP is shown
correctly on the PersCom.
I will check for the other consequences on this. For z/VM this is probabl
y
not a problem yet as I am only at the beginning and do not
a C-program those characters do not match the codepoints the
C-Compiler is expecting.
How can this be addressed?
Best regards,
Florian
On Fri, 2 Jan 2009 02:22:57 -0500, Alan Altmark alan_altm...@us.ibm.com
wrote:
On Wednesday, 12/31/2008 at 01:39 EST, Florian Bilek
florian.bi...@gmail.com
Dear all,
I am just trying to figure out what has to be done to use code page 273 o
r
1141 correctly under z/VM?
I can not find a config statement aside from the character default statem
ent
but there is no real code page statement.
Does the code page setting come from the LE setup?
Best
Dear all,
I have noted that APAR PK65850 for enabling the CMS SSL Server is closed
and
a PTF is available. I ordered and downloaded the PTF.
However I am not totally sure how to apply this PTF. Up to now I had only
appied the stacked RSU from MAINT. When I try to run a
VMFREC ppf 5VMTCP40
Dear Les,
OK! Does that mean there is no official ML2 support for DFSMS/VM or are
there alternative tools?
Regards,
Florian
On Tue, 2 Dec 2008 11:07:47 -0500, Les Geer (607-429-3580)
[EMAIL PROTECTED] wrote:
I just installed DFSMS/VM. During the study of the planning guide I saw
that
all
can't
DATAMOVE this not for me? Is this room for future enhancements?
--
Best regards
Florian Bilek
Kris,
Thanks for this excellent explanateion.
However it seems quite unsatisfactory. Would it worth to place a FITS
request to extend this functionality? I think DDR should be used from
DIRMAINT. It is quite cumbersom to do it manually and that is why I have
Dirmaint.
Best regrads,
Florian
Dear all,
I am not sure but I think to remember that there was a discussion about a
sort of ASCII console for z/LINUX Guests under z/VM.
I think it was a z/VM SVM that uses IUCV to connect to the serial consol
es
of a z/LINUX Guest.
Is there some news on such a facility such as availability,
Dear all,
Does a JAVA VM for z/VM (CMS) exists? Only asking for curiosity to play a
round.
Thank you very much in advance.
Best regards,
Florian
Dear all,
Some weeks ago I was busy setting up an ISFC connection between my two
z/VMs. Meanwhile I succeeded in this task.
However, I have still some quesions. Maybe I miss some documentation but
z/VM connectivity manual is not too specific for my taste.
I have established a CTC connection
Dear all,
Are there alternatives for SPXTAPE?
I would like to copy the single pack spool with the saved segments from t
he
newly installed z/VM 5.4 to a spool area that consists of several disks.
I
would like to avoid regenerating those shared segments.
Doing this, I would like to use a
Hi Dave,
This is great! Thank you very much. It is exactly what I was looking for.
BR Florian
On Mon, 6 Oct 2008 08:00:06 -0500, Dave Jones [EMAIL PROTECTED] w
rote:
Hi, Florian.
You might want to try using the SFB utility that can backup and restore
NSS
as well as
DCSS type segments.
the ISFC collection.
To make an SFS server available globally:
- the filepool ID must be unique (the userid is of no importance)
- the filepool ID must not start with VMSYS
- the GLOBAL parameter must be coded in the server's DMSPARMS file
2008/7/22 Florian Bilek [EMAIL PROTECTED]:
Dear all,
What
/rolled back.
You should not activate the IS-link before the resources are made
unique, otherwise some things may stop working. But, as far as I
know, SFS and DB2/VM are the only users of CRR, so only their users
could get in trouble.
2008/8/27 Florian Bilek [EMAIL PROTECTED]
Dear all,
Last
On Thu, 17 Jul 2008 08:47:19 -0400, Alan Altmark [EMAIL PROTECTED]
wrote:
On Thursday, 07/17/2008 at 07:50 EDT, Fox Blue [EMAIL PROTECTED]
wrote:
I set up the REXEC daemon on z/VM 5.3 and wanted to do a logon of a
userid
RVMCP with my own credentials. For this the RVMCP directory entry has
a
Dear all,
I am working now, thanks to Kris, with SysAffin in the Directory. In
principle this works fine but I have now an issue with the DISKMAP utilit
y.
The report run on one system shows space of the disk as free where a
SysAffin is coded for another system.
IMHO this will lead to
Dear all,
Is it possible to switch the functions of the system userids such as EREP
or
DISKACNT to other machines without IPL?
As far as I know those names are defined in the system config file of the
z/VM instance. Is it possible to change the values stated there on the fl
y?
Best
Dear all,
What is the right approach to define VMSERVx machines to work in CSE?
When the directory is shared and the names of those machines MUST be the
same on all the z/VM instances there is a conflict since they use all the
same minidisks. I couldn't find too much information about this.
Kris,
thank you for this info. But isn't it the case that e.g. DFSMS/VM need th
ose
SFS servers and if so, I thought the name MUST always be the original one
.
If this is not the case than fine. Does it mean that the DFSMS an be run
from other SFS servers as well?
Best regards,
Florian
Hello Kris,
Thanks for that information. I will have a look on ISFC. First, I have to
get me some CTCs ;-)
Best regards,
Fox
47 matches
Mail list logo
