Dora Smith wrote
Or Sherry could just give all the information at once.
AIUI, Sherry is not from the Sales department so it's not her territory.
Honestly, it's going to take more days to extract the answer to my
question from this list than it would to ask Sales!
Precisely. So why not
Jenny M Benson wrote:
Dora Smith wrote
Or Sherry could just give all the information at once.
AIUI, Sherry is not from the Sales department so it's not her territory.
Honestly, it's going to take more days to extract the answer to my
question from this list than it would to ask Sales!
If you didn't purchase the software through Millennia, why would you even begin
to ask about your registration key on this list? Common sense would dictate
that you go to the source of your purchase.
Ron Bernier
Since Millennia has not yet sold this software from our online
store, you'll
Why would I be asking on this list if I didn't purchase my software from
Millenia? Who else would I have gotten it from?
!!!
Yours,
Dora Smith
Austin, TX
[EMAIL PROTECTED]
- Original Message -
From: Ron Bernier [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
I suppose never too late to find out.
Yours,
Dora Smith
Austin, TX
[EMAIL PROTECTED]
- Original Message -
From: Lloyd Hite [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, December 12, 2006 3:21 AM
Subject: Re: [LegacyUG] Map My Family Tree - how do I recover
This one was so weird I checked - and he's right. We've been discussing
Map My Family Tree like it's Millenia's, and that's almost certainly why I
purchased it, but it isn't Millenia's. It's Progeny's.
I wonder if that means it should do much of anything.
Thanks, Ron, you saved me two days
Progeny Software - like I did and, I am sure, other people did. Just
because Millennia sells the product does NOT mean that they are the only
source for the product.
Dora Smith wrote:
Why would I be asking on this list if I didn't purchase my software
from Millenia? Who
Hi Dora, I just purchased Map My Family Tree (MMFT) from Progeny too
(this past Saturday) and there was no registration key I needed.
Also, my CD came in a little padded envelope and was not bulky at all.
Registration was a snap.
Did you see my previous question to Pierre on this list about
I apologize if I'm mistaken, but I believe this thread has metamorphosed
from Registration key for Legacy Family Tree into
Registration key for Map My Family Tree.
Just for the record, Map My Family Tree does not require a
registration key. I speculate that Ms. Smith may have originally been
Thank you Pierre,
Whilst there can be no objection to questions related to Legacy *and* Map My
Family Tree I really do hope that subscribers will take note of your last
paragraph
For those who recently didn't know what highjacking a thread is, perhaps the
change in topic in this thread best
Map My Family Tree shows individual Canadian provinces. We have not yet
found an economical source for the Counties, will probably have to
digitize it ourselves.
For all questions regarding Map My Family Tree support, please visit our
Support
Forum.
Pierre
At 05:53 PM 11 12 2006, you wrote:
I
Actually, it's puzzling that we would be discussing Map My Family Tree - and
this is what confused me. Rootsmagic (Not Millenia, which is who I thought
developed it) came out with a better program called Family Atlas alot more
recently. I just opened the one that is currently and recently
Our support staff will be addressing your
query in the Support Forum.
Pierre
At 05:59 PM 11 12 2006, you wrote:
Hi Pierre, thanks for pointing
out these features of Map My Family
Tree (MMFT) software. I am looking forward to trying out all
these
nifty features. In the mean time, could you help
I'm more confused than ever. Now that I know that Legacy has nothing to do
with Map My Family Tree, why are we supposed to discuss it on Legacy forums?
I'm missing something.
Or is it that Pierre Cloutier is with Progeny, so our Support Forum is
Progeny's?
Yours,
Dora Smith
Austin, TX
This is a *long-standing* bug going back to Version 5, at least. And
it's one of two main reasons I'm still using Version 5. (The other has
to do with possible problems with WIN98SE and Legacy 6). I had hoped
that the other recent problems in the relationship area would mean a
total
I'm a little confused. I purchased this software directly from Progeny. The
CD arrived in the mail yesterday. There is no registration key. All I had to
do was install it. Started working with it immediately.
Mary
Dora Smith [EMAIL PROTECTED] wrote:
Why would I be asking on this
Dora,
Map My Family Tree is a product that we sell, along with other Progeny
programs. We *don't* sell Family Atlas. Therefore, a discussion of that
program would be greatly off-topic for our list. This isn't a general
genealogy discussion list but one for Legacy and the add-on programs that
Is it just me or has this thread gone to nowhere and back??
Dora Smith wrote:
Actually, it's puzzling that we would be discussing Map My Family Tree
- and this is what confused me. Rootsmagic (Not Millenia, which is
who I thought developed it) came out with a better program called
Family
It's not just you. I don't even see the connection between Family Atlas and the
Subject.
Certainly makes the point about highjacking a thread being confusing though.
Ron ferguson
_
For Genealogy, Software and Social visit:
I use labels. I have a P-Touch label maker. I simply label each source with the
next number available and that number is put on the source detail in the space
called ID. I do not use MRIN's at all as they can change.
- Original Message -
From: Janis Gilmore
To:
Sharon...thanks for the comments...I probably seemed like I was complaining but
I actually wasn't...just making a comment on a problem that I still had...as an
FYI to the powers that be..I personally love the program too...I would never go
to any other genealogy program. Most of the glitches
Actually I just checked my file again...and it seems that in most relationships
with unknown spouses, they do list relationships...but I found my own great
grandmother's is the only one that it doesn't show...it is very weird...perhaps
it is something just with my program. Perhaps the problem
Sharon,
I agree whole heartedly. Those that berate the company for errors should
realize the massive programming that is involved. You can't be all things
to all people all the time. I still believe Legacy to be the best and he
company does all they can.
I, for one, downloaded as soon as
Visit http://www.legacyfamilytree.com/Redirect/Store-AddOns.asp to order, or
for more information and sample maps.
See your ancestors' lives on a map with this new one-of-a-kind mapping
software.
Map My Family TreeT is a revolutionary genealogy mapping product that
presents your ancestors' lives
Walt,
No need to yell! I'm sure someone just made a mistake and I've written to
the sender about this.
Unfortunately, the email will go to the archives and there is no way to
remove it from the archives. Thank goodness the acknowledgement didn't
include the credit card number!
Thanks for
This is somewhat off topic, but someone I met when I put a Legacy Tree on
Ancestry has
been bugging the living fool out of me. I am a genealogist for a historical
society
and as part of our outreach I set up Legacy family files on local families and
put it
online for researchers. This one
Donna,
Try setting the relationships again. Tools / Set Relationships.
This might correct the problem for you.
Glen Ballard
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Donna L.
Alden-Bugden
Sent: Tuesday, December 12, 2006 10:46 AM
To:
I've been helping a cousin with his paternal grandfather's side of the
family. Thus far I have only about 100 names, but there are several branches.
As he does not use Legacy, I want to print a report for everyone in the
database and include all of the data so he can then input the data
Sounds like a case of blocking the e-mails!
Best of luck,
David S Brookes
Polesworth,NWarks.
England
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of archives
Sent: 12 December 2006 21:27
To: LegacyUserGroup@legacyfamilytree.com
Subject: [LegacyUG]
If you use Mail Washer (Free) you can bounce them! (Yes, I know it takes up
bandwidth)
Ron Ferguson
_
For Genealogy, Software and Social visit:
http://myweb.tiscali.co.uk/fergys/
*Use Legacy Search - see My Blogs*
Includes
archives wrote
This is somewhat off topic,
Anyone can perhaps be forgiven for occasionally posting a message which
they believe, erroneously, to be on topic. We are repeatedly asked
*not* to post off-topic, so there is no excuse for doing so knowingly.
--
Jenny M Benson
*** Give the
Get a court order!
- Original Message -
From: archives
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, December 12, 2006 1:26 PM
Subject: [LegacyUG] Genealogy Etiquette
This is somewhat off topic, but someone I met when I put a Legacy Tree on
Ancestry has
been
No...I tried to set it about 5 or 6 times...and even disconnected and
reconnected the family and reset the relationship...won't work. For now I
have attached an unknown father for the illeg child so that it will create
relationships for me
Donna
Jon,
May I suggest multiple lines of descent (ReportsBooksMulltiple Lines of
Descent). If you start with the eldest ancestor in each line you will cover all
the people in the data base. I would suggest that you check Don't repeat
duplicate Lines (Report OptionsFormat) but you can include all
Does Map My Family Tree include Canada.
Charlotte Jack
Winnipeg, Canada
- Original Message -
From: Geoff Rasmussen [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, December 12, 2006 12:42 PM
Subject: [LegacyUG] New software - Map My Family Tree - now available
Mary:
I'm feeling a bit vague on the details. What information does he want, what
is his relationship with you, and what is the money supposed to be for?
Not, you need to tell me, but these things make a difference.
It would make a difference to me what personal information he wants.
Why are we subjected to this?
- Original Message -
From: Dora Smith [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, December 12, 2006 4:25 PM
Subject: Re: [LegacyUG] Genealogy Etiquette
Mary:
I'm feeling a bit vague on the details. What information does
I'm getting more confused by the minute.
Map My Family Tree and Family Atlas are two genealogical mapping programs,
and neither is made by the makers of Legacy. Why is Map my Family Tree on
topic and Family Atlas not on topic? If I even have it right way around.
But I think I just
Try printing Individual reports on everyone in the database. The GEDCOM
export though is almost certainly the quickest way to transfer
information from one genealogy program to another.
Brian
Customer Support
Millennia Corporation
[EMAIL PROTECTED]
http://www.LegacyFamilyTree.com
We are
Tell him that you would hate to have to report him to the authorities, but there
are laws against harassment and that his refusal to take no for an answer is
getting very close to constituting harassment.
Regards,
Ron Bernier
This is somewhat off topic, but someone I met when I put a Legacy
Oh. That straightens it out.
Though I actually checked, and it wasn't on your list of software.
Yours,
Dora Smith
Austin, TX
[EMAIL PROTECTED]
- Original Message -
From: Sherry/Support [EMAIL PROTECTED]
To: LegacyUserGroup@LegacyFamilyTree.com
Sent: Tuesday, December 12, 2006 10:17
I did see a thread about Gedstar for the Palm PDA but no real
review/usage information. Are there any users here of Gedstar who can
point out the pros and cons? I don't need any information on PDAs in
general as I have been using a Palm of one sort or another for years.
Jim
*** Give the gift
Yes it does. The developers of the software, Progeny, are headquartered in
Canada as well.
Thanks,
Geoff Rasmussen
Millennia Corporation
[EMAIL PROTECTED]
www.LegacyFamilyTree.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Charlotte
Jack
Sent:
As with almost everyone, I have entries of individuals where I know a
GGG-grandfather for
example and have a first name and perhaps even marriage and death dates for
his wife, but
(at least for now, but perhaps it will never be found) no known surname. I
need to put
someone in that slot, so
I have version 6.0.0.64. I submitted some names, but decided not to use them
so I chose to unsubmit the names by the same parameters I submitted them (a
tag number). But no submitted dates were cleared by that action. I was able
to accomplish what I wanted to do, but if I ever need to unsubmit
Yes it is. Go to the link below and click on Add-Ons. It is first on the
list.
http://www.legacyfamilytree.com/Store/enter.html?target=../en-us/dept_2.htmlmid=Legacy
Kay Fordham
- Original Message -
From: Dora Smith [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent:
Dora,
I hope that this finally puts this topic to rest.
For once and for all, Map My Family Tree (MMFT) is a product of Progeny
Software. Millenia (the makers of Legacy) have chosen MMFT as the
mapping software they will market. Therefore, it is available from the
Legacy website as announced
I thought it was a good response to a difficult situation. A lot of it
is useful to me.
Elizabeth C
Roger Lewis wrote:
Why are we subjected to this?
- Original Message - From: Dora Smith [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, December 12,
Dave: Interestingbut I have a different method.
In instances where I have SOME information but no surname or given
name I use [[ ]] enclosing say their relationship to known
individuals in my family file So for example I might have a marriage
that shows John Doe married to Mary [[Wife of
49 matches
Mail list logo
