Many thanks to all who responded. Unfortunately, I do have Windows2000, and my
computer is so old, it is not able to be updated to a newer operating system;
just not enough room! Guess I can put the mapping feature on the backburner for
awhile.
Roxanne Baird
--- On Tue, 6/24/08, Brian/Support
Although I don't have Ver 7, I did see the What's New in Legacy 7 video.
Sure looks like push pins to me in the Mapping demo. There must be a way to
display the pins.
Regards, Jane Tripp
Free videos are accessed on the Legacy Home tab
From: Robert57P via Gmail
To: LegacyUserGroup@legacyfamilytre
Sometimes when I have not been able to uninstall via Control Panel
Add/Remove.
This problem was related for me when I had several different
installations on my machine.
I have been able to uninstall, when I go to installation directory and
run unwise.exe.
Unwise.exe will use the install.log f
LG7 has been an unmitigated disaster for me. I am now stuck with a LG7
that is not fully functional and I cannot even remove it and revert to
LG6. Is there any other FT software that is better than this? I have
wasted so much time on this and LG support has been of no help at all.
Amrit
Amrit
Chap,
Thank you for your thoughtfully detailed response. That explains a
lot. And you've persuaded me of its value. I've already installed it
and am proceeding to familiarize myself with its use.
Glenn
On Sun, Jun 22, 2008 at 10:41 AM, Leon Chapman <[EMAIL PROTECTED]> wrote:
> Glenn:
>
> You
They're really balloons Barb - very different from the push pins shown in
the illustration in the manual.
Jeff
Barb Weed wrote:
Jeff
Well round headed pins. They do look like baloons!
Barb
- Original Message
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfa
Me too. Still is a balloon of a different color.
Jeff
- Original Message -
From: Robert57P via Gmail
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, June 24, 2008 8:42 PM
Subject: Re: [LegacyUG] LG7 and Virtual Earth - change to push pin markers
That list only chan
I see what you're asking. Sorry I misunderstood. I should probably go back to
lurking. :-) It may just be a broad interpretation of the word 'push pin'. It
seems like I remember earlier some discussion of an actual push pin looking
marker but the end might have been too wide and covered detail o
Yes!!! Mine was doing that! It was getting annoying and I was just getting
ready to send a message to tech support but then it started working
correctly.
michele
- Original Message -
From: "Jack Earnshaw" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, June 24, 2008 11:11 AM
Subject: [Lega
I just checked for log files and in LegError.log, I found this:
Sunday, September 16, 2007Error 3314: The field 'tblMR.IDMS' cannot
contain a Null value because the Required property for this field is set
to True. Enter a value in this field. - Error saving Marriage.
Saturday, June 21, 2008Erro
Jdm
I have highspeed connection. Left dialup long ago.
Barb
- Original Message
From: John Magyari <[EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, June 24, 2008 2:53:25 PM
Subject: Re: [LegacyUG] LG7 and Virtual Earth
Barb,
Do you have a high speed connect
Jeff
Well round headed pins. They do look like baloons!
Barb
- Original Message
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, June 24, 2008 1:53:49 PM
Subject: Re: [LegacyUG] LG7 and Virtual Earth
You say it shows up with pins. O
At present, the fix has been impending since L4, which
would allow our having access to the order. Not very
high on the fix next.
Rich in LA CA
--- Georgia <[EMAIL PROTECTED]> wrote:
> Is there a way to change the order of the AKAs? In
> the Family View,
> I have one of my information fields se
That list only changes the colors and size for me. Doesn't change it from a
balloon to a pin (even though the text says "push pin", all I get are
balloons).
Bob
- Original Message -
From: Mary Fowler Leek
To: LegacyUserGroup@legacyfamilytree.com
Sent: Tuesday, June 24, 200
Thanks, Brian. It seems to continue happening to just one of my sources -
whenever I load another source, the prompt gets clicked off. But it's just
one source - the others seem to "stick" - and I can live with it, especially
now that I know about it.
Elizabeth
researching the descendants of W
John,
Thanks for the suggestions. However, I just came home and tried what I
planned to do. I tried to uninstall LG7 and got an error Unable to find
INSTALL.LOG. I reinstalled and it works fine except for VE, for which I
get the same error. I will give you some more background info:
1. I had L
Is there a way to change the order of the AKAs? In the Family View,
I have one of my information fields set to show the 1st
AKA. However, now I have a second AKA that I would prefer to be the
one showing but no way to reorder the list(like you can events) so it
will be the one showing in the
Is there any way to alter the citation text? The over-ride doesn't seem to
work. I am attempting to source a census report with the names in list format
instead of paragraph format. Can I convert them back to the Legacy 6 format?
Judie in Oregon
Legacy User Group guidelines:
http://www
I know a lot of problems have been fixed and will become available in the
next Legacy 7 update.
Any idea when that update might become available?
Jeff
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyus
Karima:
Why wouldn't you use the death records template and select "held at
local/county level" option?
As I'm getting familiar with SourceWriter, I'm beginning to think that there
could be 2-3 "correct" templates to use for a given source and in some
instances it may not matter which one you sel
Jeff,
Click on Mapping> then Options at the lower part of the screen> push pins ...
there you can select from a list of markers.
Mary
From: [EMAIL PROTECTED]
Subject: Re: [LegacyUG] LG7 and Virtual Earth
You say it shows up with pins. On mine it shows up with balloons. I wonder
Not if you saved the installation file you previously downloaded (which you
should always do).
Gary
-- Original message --
From: "Deborah K. Millemaci" <[EMAIL PROTECTED]>
Ron & Gary:
Thank you for your replies. Now question is - please forgive me, but will I
need to
Judie,
To change what you've entered in the Text/Comments section of the Source
Detail, open the Assigned Sources screen, click on the appropriate source in
the list, then click on Edit Detail. Finally, click on the Text/Comments
tab, and you can edit anything you want.
As a note, when you create
Oh, please, please, let us not have a repeat of when, soon etc regarding an
update! Legacy - I suggest that you say nothing!
Ron Ferguson
_
New Blog: Free Contacts Database for use with Open Office
http://www.fergys.co.uk
Vie
I use Fire Fox 3 and my Virtual Earth works just the same as it did two
weeks ago.
No problems at all. The new Fire Fox is awesome. Only problem I have had
with it is when I close my browser I get a message that said it crashed but
since I closed it anyway, I just ignore it. New function if wonder
Not Missing Information. Missing Sources.
JL
JLog - simple computer technology for genealogists
http://www3.telus.net/Jgen/jlog.html
Brian/Support wrote:
I am confused. There is no "name" to search for. Do you mean Surname
or Given name or both?
I testing using the Sample file that comes with
Anothe rLUGger has just drawn it to my attention that the Marriage
Address is not showing up on Individual Reports. In Report Options,
Include the check box for including Addresses of Birth, Christening,
Death, Burial and Marriage is ticked and the Address is included for
other Vital Events,
When I downloaded 7, I put it in a Legacy7 folder and kept Legacy 6 in the
Legacy folder. I'm still using 6 til I become more confident that 7 will work
for me.
I don't think you can transfer a program using a flash drive, you can transfer
a database file. I would love to be able to use my flas
Barb,
Do you have a high speed connection to the Internet or Dialup?
If dialup, what is max modem speed?
jdm
Barb Weed wrote:
Hi My experience with Legacy and VE is as follows. I have IE7 on my computer
but I use Fire Fox as my default browser. When I first opened up maps I got a
message t
I also use Firefox as my default browser and there is no conflict with
Legacy. When you use a feature that relies on IE (the Legacy Home Tab
and Research Guidance) Legacy uses IE to display the information. When
you call an external Browser such as Internet > Search Internet then
Legacy opens y
Deb,
That is your best plan. It would be best if you check exactly what what you
have on your PC first to see if you do have two versions in different folders
(Use Windows search to search for Legacy.exe). You can find the version
connected to your Desktop Icon by right clicking the Icon and t
You say it shows up with pins. On mine it shows up with balloons. I wonder
why. I would prefer the pins.
Jeff
Barb Weed wrote:
Hi My experience with Legacy and VE is as follows. I have IE7 on my
computer but I use Fire Fox as my default browser. When I first
opened up maps I got a message
I am confused. There is no "name" to search for. Do you mean Surname or
Given name or both?
I testing using the Sample file that comes with Legacy. I searched for
missing surnames (there were three) with both surname and given names
selected and the Only ONE or more option then there were 10 f
Roxanne wrote:
Is there a workaround for this? I use Firefox exclusively, and when I
attempted to use the mapping feature, I got a popup which stated I had
to have IE7. Yes, I HAVE IE, but since I don't use it, I never update
it. Wondering, too, if this means I can't use Firefox as my default
I can't seem to figure out which template to use for recording copies of
original death certificates that I have obtained from County Clerks. Can
someone help me with this?
Thanks in advance,
Karima
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived
Ron & Gary:
Thank you for your replies. Now question is - please forgive me, but will I
need to download the new version 7 again...? - Deb
~~
Researching the Following Familiy Ancestors:
Taylor Family From Carter County, KY
(Taylo
I assume on your original install you saw no error messages.
I wonder whether reinstall would make a difference.
1) You might want to check your system, for XP maybe other OSs
scan file system
To do this simply go to the *Run *box on the *Start Menu* and type in:
*sfc /scannow*
This command w
Brian,
Find>Missing Source>Name.
On the face of it there does seem to be a problem here but I do not have time
to check out the logic, as I am only 1/2 way through the 50 hours of work being
caused as a result of the known bug in the Legacy Coding of Web Pages, first
reported 3 years ago.
R
Karima,
Death Records > Death Certificate > Local/County level > Original.
The term "original" is probably a bit misleading for now. We'll come up with
better phrasing in the future. But this is the specific template that was
intended for your situation.
Thanks,
Geoff Rasmussen
Millennia Corpor
I was in your position and tried most things on Ubuntu.
Gramps is very good for files up to 60,000 persons on my thinkpad with half
a gig of ram. With more horsepower you might be able to run much bigger
files. The compatibility with Legacy is excellent. It does not have quite
as many useful to
Elsie:
I did have a shortcut but I deleted it...I'm hesitant to try and download
again..at the moment.
Deb
~~
Researching the Following Familiy Ancestors:
Taylor Family From Carter County, KY
(Taylor Branch - Willard)
Hicks Fam
Thank you to all who replied.
All of those suggestions will be put to good use.
With my going over records, the nag screen for a period after the
initial came up and I just clicked it to not remind me anymore, so
what I got was a result of pushing another button.. lol
Again thank you all!!
Chri
Yes, I have some info on them. I know who they were married to, and often
the names of the children. Sometimes I have approximate birth and death
information. What I was saying is that I don't go looking in the Index for
people I don't know about. If Jane was married to John Smith, I'll go to
J
Hi My experience with Legacy and VE is as follows. I have IE7 on my computer
but I use Fire Fox as my default browser. When I first opened up maps I got a
message that VE could not be found. Left maps and played around a bit went
back to maps and got a blank screen, waited a long time and lef
Keith,
I have seen the reports about it, but went to their site yesterday and it said
"RC". I must admit I did not bother looking after that.
Ron Ferguson
_
New Blog: Free Contacts Database for use with Open Office
http://ww
Roxanne wrote:
Is there a workaround for this? I use Firefox exclusively, and when I
attempted to use the mapping feature, I got a popup which stated I had
to have IE7. Yes, I HAVE IE, but since I don't use it, I never update
it. Wondering, too, if this means I can't use Firefox as my default
Sounds like there are major problems with the Source Citation Report. Any
Legacy staff have thoughts on this?
- Original Message -
From: "Carol Costa" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, June 24, 2008 9:47 AM
Subject: RE: [LegacyUG] Source Citation Reports
I just printed a sourc
Roxanne,
As with many people, I too use Firefox as my primary browser. However, for
mapping in Legacy I set IE7 as my 'alternate' browser. Please check your
options (sorry, I am not at my home computer so I cannot give precise
locations). One of the options tab deals with setting specific locat
Elizabeth,
When you first copy a source to the source clipboard the default setting
of the prompt for detail is OFF. I tested saving the clipboard and if
you turn the prompt for detail ON then save the clipboard the prompt
will be ON when you reload the saved clipboard.
I have entered an iss
Ron & Gary:
Thank you for your replies. Now question is - please forgive me, but will I
need to download the new version 7 again...? - Deb
~~
Researching the Following Familiy Ancestors:
Taylor Family From Carter County, KY
(Taylo
I hate to tell ou this but FF3 has been out for real for a few days now :)
On Tue, Jun 24, 2008 at 1:38 PM, ronald ferguson <[EMAIL PROTECTED]> wrote:
>
> Jeff,
>
> Are you suggesting that FF3 is interferring with the IE7 engine? The fact
> that any other browser is installed/used/set as default,
Both the site work perfectly fine from FF3 and IE7. The reason it does
not seem to work is that there seems to be a missing file. On this
thread, there was a message stating that it is a missing DLL. I will
uninstall and reinstall and see if there is any diff.
John Magyari wrote:
Can you tr
I just printed a source citation report and ticked the option for printed
style format. One source from the new source writer was mixed in with every
single one of my other 'new source writer sources'. Like I had used the
clip board and pasted into every new source. Which I did not do. Before
p
I've noticed over the last couple of days that when I open the Name List
that it doesn't always open with the person currently highlighted. Instead
it goes to the first person on the list. It does seem consistent in that it
is always the same people that the problem occurs with. Anyone else noticed
Mapping makes system calls that are available with IE7 to allow Virtual
Earth to display.
It doesn't make any difference what default browser you use for mapping
function, mapping needs to interface directly via OS to IE7 interface
and is not looking to see what default browser you use.
If
Dede,
Thanks. I would have never found it.
Jim Ormsbee
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dede Holden
Sent: Tuesday, June 24, 2008 4:27 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] Standardization Tips message not sho
Are you using a shortcut for Legacy that is still pointing to Legacy 6? Just an
idea.
Elsie
- Original Message -
From: Deborah K. Millemaci
To: LegacyUserGroup@legacyfamilytree.com
Sent: Monday, June 23, 2008 6:21 PM
Subject: RE: [LegacyUG] Online download of Legacy 7 Questio
No, I thought that FF3 had a problem accessing VE. I am not sure because I
have not yet upgraded to it. But if Legacy by design is accessing directly
through IE then it should have no impact either way.
Sorry for the confusion.
Other possibilities may be a firewall problem on his PC preventing
Roxanne,
You are confusing two totally different things here. You are free to use
whatever browser you like *but* Legacy does need IE7 to be *installed* as it
uses the IE7 engine for VE. You can set as your default whichever browser you
like ( currently I am using Safari as my default ).
Ron
Ron,
I tired with IE7 as default too and the result was the same. I am able
to access VE at http://maps.live.com/ from FF3.* and IE7. Only that I
keep getting the same error irrespective of from where within Legacy I
access it. I have not tried reinstall, but am not optimistic, as my
father-in
General Release is now available Ron -- they had over 14 million
downloads since the release - and hit a WORLD RECORD the first day!
Some ADD-ONS still missing - but seems to do FINE with Legacy 7 - no
conflicts I have seen.
Keith
On Tue, Jun 24, 2008 at 8:38 AM, ronald ferguson <[EMAIL PROTECTED]
You need to update IE - but never need to use it ( I never do). SOme
of the programming in IE is used by the mapping program in the
background.
Keith
On Tue, Jun 24, 2008 at 9:10 AM, Roxanne <[EMAIL PROTECTED]> wrote:
> Is there a workaround for this? I use Firefox exclusively, and when I
> attem
Have not tried VE directly - but with FF3 as my default - Legacy still
does fine with VE.
Keith
On Tue, Jun 24, 2008 at 8:08 AM, [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
> I too use Firefox but have not yet upgraded to the new version 3. I believe
> I read somewhere that FF3 has problems with
Is there a workaround for this? I use Firefox exclusively, and when I attempted
to use the mapping feature, I got a popup which stated I had to have IE7. Yes,
I HAVE IE, but since I don't use it, I never update it. Wondering, too, if this
means I can't use Firefox as my default browser with Lega
Jeff,
Are you suggesting that FF3 is interferring with the IE7 engine? The fact that
any other browser is installed/used/set as default, should not make any
difference. I have 5 browsers installed and no problems. I have not downloaded
FF3 as it is only the RC version.
Ron Ferguson
Thanks. I will reinstall and let you guys know the result.
Gene Young wrote:
Amrit Yegnanarayan wrote:
I purchased the upgrade to LG7 and upgraded. The VE does not work. I
get an error message:
Error creating Virtual Earth map
Error 53: File not found
Would you like to try again
Can you try goto to both these sites and see if Virtual Earth Works?
http://maps.live.com
http://dev.live.com/virtualearth/sdk/
It would be interesting to know if you have the same or other problems here.
jdm
Amrit Yegnanarayan wrote:
I purchased the upgrade to LG7 and upgraded. The VE does not
Yes I've seen this.
In Index View Click in the Upper Left Box RIN
a) does anything happen?
b) then exit Legacy and restart Legacy, does everything appear to be
working now?
Please email back what happens.
jdm
Randolph Clark wrote:
I just imported an FTM gedcom and the index view is devoid of
I too use Firefox but have not yet upgraded to the new version 3. I believe
I read somewhere that FF3 has problems with virtual Earth.
Jeff
Amrit Yegnanarayan wrote:
I purchased the upgrade to LG7 and upgraded. The VE does not work. I
get an error message:
Error creating Virtual Earth map
I forgot to add: one way to find out if FF3 has a problem with VE is to try
to access VE in FF# independently.
Jeff
Amrit Yegnanarayan wrote:
I purchased the upgrade to LG7 and upgraded. The VE does not work. I
get an error message:
Error creating Virtual Earth map
Error 53: File not fo
Tom,
I have tried every possible combination of options and I cannot
reproduce this problem as you describe it. In fact, I can't find a
way to keep the Source Detail from printing on every source I've
tagged, as long as I've chosen all the options on the tab for the
report. (Specific events and al
Amrit Yegnanarayan wrote:
I purchased the upgrade to LG7 and upgraded. The VE does not work. I get
an error message:
Error creating Virtual Earth map
Error 53: File not found
Would you like to try again
Yes/No/Quit
I have IE7.* on my m/c, but it is not my default browser (FFX3.* is
Amrit Yegnanarayan wrote
I purchased the upgrade to LG7 and upgraded. The VE does not work. I
get an error message:
Error creating Virtual Earth map
Error 53: File not found
Would you like to try again
Yes/No/Quit
That error message means exactly what it says: that a required file is
Tom,
As far as I know this has been reported and is on the list
Ron Ferguson
_
New Blog: Free Contacts Database for use with Open Office
http://www.fergys.co.uk
View the Grimshaw Family Tree at:
http://www.fergys.co.uk/Grimsh
Amrit,
You only have to have IE7 installed not set as default - so since you have it
you can now forget about it. You say "purchased" so I assume you have the
Delux. Do you have enough memory to run it (I know it says "Path not Found")?
I don't think these possibilities will work but here goes
Yes, names were everywhere but in Index View. However now they have
suddenly appeared. Magic is great.
Randy
On Tue, Jun 24, 2008 at 6:28 AM, ronald ferguson <[EMAIL PROTECTED]> wrote:
>
> Randy,
>
> Are you sure it isn't an empty Gedcom? I do not understand what you mean by:
> " If I select it
Dede and Interested Legacy Staff,
In the Reports window, under Miscellaneous Reports, I click on Source
Citation Listing. The Source Citation Report Window has two tabs...Include
and Options.
On the Include tab I have selected Only Tagged Sources (I have already
tagged the particular source
I purchased the upgrade to LG7 and upgraded. The VE does not work. I get
an error message:
Error creating Virtual Earth map
Error 53: File not found
Would you like to try again
Yes/No/Quit
I have IE7.* on my m/c, but it is not my default browser (FFX3.* is). I
switched to IE7 as de
Tom,
Since I'm one of those who has been guilty in the past of answering
the wrong question, I'm trying to be careful here. There are two tabs
available when you choose Source Citation Report. Have you looked at
both of those and marked the appropriate boxes? It seems that there
is more than one
Randy,
Are you sure it isn't an empty Gedcom? I do not understand what you mean by: "
If I select it and then return to family view I end up on the same person". Are
you saying that the names are in Family View but not in the Index? I have just
importes a Gedcom to test and it is all there.
Y
Jim,
Try Options (or Ctrl+Z) - Customize - Other - Optional Reminder
Messages - Message Tab, bottom box. (Message to always show
Standardization Tips)
Dede Holden
On Mon, Jun 23, 2008 at 10:57 PM, Jim Ormsbee <[EMAIL PROTECTED]> wrote:
> My wife unchecked 'Always show Standardization Tips' after
[EMAIL PROTECTED] wrote
What is the best way to deal with unknown maiden names?
Using "Unknown", or "???" creates a lot of individuals named "Unknown"
without any hint of who they are connected to.
I have no problem with using "Unknown." If I don't know the person's
surname, the chances ar
I just imported an FTM gedcom and the index view is devoid of names.
If I select it and then return to family view I end up on the same
person. Has anyone encountered this?
Thanks.
Randy
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http:
Thanks Colin, I've already paid for v7 and Mills Evidence explained in
pdf, that's what I meant by rats I was too impatient. I'm slowly
building my CD collection of AUS/NZ info so I could have waited. Ah
well no probs with what I've got now, so no worries. Thanks for the
heads up, I forget about
Deb,
Firstly your PC; it sounds like you have two versions installed here. I would
uninstall and reinstall (but see (2) below)
Laptop: You do not say how you are putting it onto your laptop. You cannot just
copy the program as it has to be installed. There are two ways of doing this
(1): down
85 matches
Mail list logo