I had good experience using LTSP on SUSE 9.3 and 10, but haven't tried 10.1. I
had more trouble with Ubuntu and couldn't get it running right after several
tries. I did several test re-install and work fine on the SUSE installs.
Shane
[EMAIL
Sorry for the multiple posts, email client had a heart attack :(
My apologies.
Shane.
---
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com
the same effect.
Has anybody experienced this sort of issue? ESD has very little
documentation and configuration options, so im not sure where to start
looking.
Any assistance appreciated.
Regards,
Shane.
---
This SF.Net email is sponsored
assistance appreciated.
Regards,
Shane.
---
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
Has any one got K12LTSP 4.1 working with the intel Se7501HG2 server
board
i cant seem to get it to boot after loading drives for the scsi
Thanks Shane Bollard
---
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project
I have tried copying the modules from /lib/modules to /opt/ltsp/i386, but no
dice.
-Original Message-
From: Anselm Martin Hoffmeister
[mailto:[EMAIL PROTECTED]
Sent: Monday, June 16, 2003 1:55 PM
To: Reutzel, Shane
Cc: [EMAIL PROTECTED]
Subject: Re: [Ltsp-discuss] Problem booting with new
would
be appreciated.
-Shane
7;t locate module 3c59x
Kernel Panic
Where is it trying to look for the drivers? I have tried to mimic what LTSP
kernel package had setup, but no luck. Any help would be appreciated.
-Shane
Has anyone tried to set LSTP up on BSD ?.
---
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
things.
BTW, I anticipate getting "vehicle immune" 12V input 150Watt ATX psu's
soon for maybe $50 !.
ANY comments welcome.
Shane
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://t
Has anyone in the group used Wireless (radio) K/b, and/or mouse with
either full Linux, or diskless w/s's ?. I am considering installing
base x'ceiver inside front cover, so box can be either under, on, or
behind desk, with only monitor wir
kless systems . . . cheaper to install,
and FAR cheaper to maintain.
Shane
BTW. Just because I make my living from computers, doesn't mean I'm not
biasedGuess which way.
garry wrote:
On Fri, 2003-02-14 at 17:14, George Gambill wrote:
Sorry? For what?
Last year i put together a disc
That's what you get for suggesting that you might stick with Windoze ;-)
David Leuser II wrote:
My God people... I asked a simple qustion meriting a simple answer. So
far I've gotten a million answers all over and off the board.
(1) Relearn the Linux filesystem you don't know what you're doing
ore involved where X configs,
and local ports/cd/printer are concerned.
This is my understanding, though others may differ, and there are, I'm
sure, grey areas as well.
Shane
Ken Cobler wrote:
Radu Filip wrote:
hello,
after going through lstp documentation and after searching the web,
rrect client root at the correct location.
This probably isn't relevant for PXE boot, as the root loc' is
specified in the PXE files on server (rather than in the tagging)..
If someone can adapt these for RH8, I would be well pleased.
Shane
Radu Filip wrote:
hello,
after goi
I just received this, and thought the server looks like good
value...albeit with bigger disk.
Regards to all
Shane
Original Message
Subject: CSO ENEWS: FREE USB Speakers & McAfee VirusScan + NEW XP 2000
System $499!
Date: Sat, 18 Jan 2003 22:35:35 -0800
From: [E
el vein of net/etherboot,
being simpler for a pleb like me to understand.
Comments welcome, though probably directly to me, rather than clogging
up this discussion group.
Another statistical interest would be a world map, indicating how many
diskless w/s's, where.
be able to identify o/p
regulators.
Is it completely dead ?. It may be repairableinput fuse ?. Do you
have a multimeter ?.The possibilities are endless.
Can anyone else confirm if they are just +5, +12 ?. It is a bit
difficult on a dead one.
Drop me a note directly...I MAY be able to hel
r
work and feels exactly like MS Word/Office.
Is that menu layout, and functionality proprietary to MS ?.
Shane
p.s. Bad luck about the NY affair.
Michael Marschall wrote:
If someone were to provide a turnkey server with a neat little web
interface for LTSP and a list of compatible "term
nd source code for
them. These are dhcp bootable (patched bios).
Shane
---
This sf.net email is sponsored by: To learn the basics of securing
your web site with SSL, click here to get a FREE TRIAL of a Thawte
Server Certificate:
is a PDA configured the same or similar in ltsp.conf?
If anyone can point me to some documents or example config files to set
this up, it would be very appreciated.
Thanks!
Shane
---
This sf.net email is sponsored by: viaVerio will pay you
I assume that it is using gdm, and I have gnome installed.
Any other pointers would be appreciated.
Shane
Hans Ekbrand wrote:
> On Tue, Sep 10, 2002 at 01:33:22PM +0100, Shane Kennedy wrote:
>
>>Hans Ekbrand wrote:
>>
>>>On Mon, Sep 09, 2002 at 07:59:13PM
not GDM last).
How can I start a display manager, without starting X on the server?.
Shane
Hans Ekbrand wrote:
> On Mon, Sep 09, 2002 at 07:59:13PM +0100, Shane Kennedy wrote:
>
>>In order to have xdm running to serve the clients, must I have the
>>server start in graphical mod
In order to have xdm running to serve the clients, must I have the
server start in graphical mode ?.
On server, I have initdefault 3. Can I start xdm via rc3.d ?. Or is
there a better way of doing it.
Shane
---
This sf.net email is
avoid login, and
execute (locally), just telnet, and a single other app'. No write
privileges are needed.
Shane
---
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.c
which that (to me, using tcpdump)indicates anything awry is
...time...etc...client ip > server ip: icmp: client ip udp port domain
unreachable [tos 0xc0]
Any enlightenment anyone ?.
Shane
---
This sf.net email is sponsored by:ThinkGeek
We
.
Client should mount /tftboot/pax1 as its root.
I notice that it starts "device management daemon for /dev
just after /sbin/init
Any insight will be welcome.
Shane
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
In trying to get a better of the whole netboot procedure, I am trying to
boot, then mount from a directory other than /opt/ltsp/i386.
I have created a directory with nfsrootinit, and edited its fstab etc.
When the client boots, it gets to
Mounting dhclient
Mounting root filesystem:
Doing the
From the server, there appears to be no attampt to mount any rfs.
Shane
---
This sf.net email is sponsored by: Dice - The leading online job board
for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.c
:92
Please append a correct "root=" boot option
Kernel panic.
192.168.0.254 is the server.
/tftpboot/pax1 is the rfs I need to mount.
From the server, there appears to be no attampt to mount any rfs.
Shane
---
This sf.net e
When I connect to the clients by telnet, I can't 'su'. I get "incorrect
password". I had assumed that the clients would use the servers user
list, and associated passwords. Can I get around this ?, or is there
another option in order to reboot the c
of errors
cpio: cannot make directory /mnt/initrd/./scripts : no space left on device
cpio: /mnt/initrd/./scripts/filename: no such file or directory
Is this trying to build an extra filesystem on disk ?
Does it matter where I run buildk from ?
Or some other
How should I specify a client specific calibration file for my
touchscreen in my lts.conf file ?
Something like
CalibrationFile = /'hostname'/touch.cal
and have
/opt/lts/i386/Host1/touch.cal
/opt/lts/i386/Host2/touch.cal
/opt/lts/i386/Host3/touch.
VIA mini ITX 500Mhz St£71, 128Mb St£17, Box with external PSU
St$46
ITX 800MHz St£79.
This at wholesale prices.
My Box..all metal (54mm(H)), internal 150W 1U PSU, 70, accepts ITX, or
Flex-ATX.
Shane
Tom Allison wrote:
>
> Peter Billson wrote:
>
> >
ant a login anyway !. Can I call X from
R.L.3, and run my app' from .xinitrc ?.
What is the best way to start my single X (tcl.tk) app' ?. No desktop
or WM, just the app'.
How can I verify that X4.2 IS the xserver which is running ?. I
upgraded "a
My appologies for appearing a complete moron, but I extracted the
initrd_kit, ran ./buildk, and got
/lib/modules/2.4.18-3custom is missing.
then
I ran
make modules_install
but, not surprisingly got 'no rule '
Where do I go from here ?
Shane
Niels Sandholt Busch wrote:
>
&g
If you are using a floppy, why not put the kernel on the floppy, with
you root fs on nfs ?.
You can still use dhcp to assign ip.
Shane
Peter Lister wrote:
>
> > I am completely new to ltsp. However, I am determined to give it a try. I
> > have a question about initializing lt
Anyone building their own compact boxes.
Yahoo have ENP-0615B's on-sale for $26 !!
Shane
---
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.c
an be attributed to 3...
Shane
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_
Ltsp-discuss mailing list. To un-subscrib
Can anyone provide me with a proven pxe kernel to use with the VIA ITX
board ?. I did download 'eb-5.0.6-via-rhine.lzpxe', but client returns
'error: not a valid image.
TIA
Shane
---
This sf.net email is sponsored by:Think
This was sent as part of a request for help. In fact, we are probably
going to revert to netboot shortly, as the clients are going to be
VIA-Mini-ITX boards. i.e. Fat clients as opposed to thin clients.
We have an LTSP system which is used in Airports. The system consists
of 6 clients with t
A much easier question this time
In my .xinitrc, I want to check for the existance of a touch calibration
file '/etc/touch.dat'
If it doesn't exist, I want to run 'mmmcalibrate', otherwise skip cal'.
Shane
Not quite ITX small, but it looks like damn good value for anyone
building a bunch of Flex-ATX small systems. Note...this is 10 off price
(Each)
http://shop.store.yahoo.com/myupgradeshop/9052.html
Shane
Title: CASEDGE 120W BOOK FLEX ATX UL/CSA/FCC POWER SUPPLY RETAIL PACK 10PCS PER BOX
I am in a similar situation with my touchscreen. I have given a
deadline for solving long term problems, and our MD is going to
recommend winding up the company if I don't succeed.
HELP
NFI touchscreen in XFree86-4.2
Shane
Jason Fillman wrote:
>
> Greetings Again,
>
to respond spuriously, and in the
bottom left of the screen. 3M (who now own Dynapro) are useless.
Shane
Bringing you mounds of caffeinated joy
>>> http
I am using an embedded '586-133, 16MB, 10MBNet, single X app', and total
boot to app takes about 2 minutes.
Shane
"A.Rodriguez" wrote:
>
> Hi all,
>
> I am running a P166 with 64Mb Ram and RTL8129 Nic terminal that I thought it
>was
> going to be
I am baffled. The attached file seems to indicate that there is no
common ground between the C&T controller and the monitor, which I can't
believe. Can anyone shed light on the cause ?.
T.I.A.
Shane
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendo
ient to rebuild
the Xconfig file without doing a full restart ?.
Shane
___
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_
Ltsp-discuss mailing list. To un-subscr
the server's video !.
Shane
___
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
r logo
and user instructions showing), no desktop or any other utilities...just
X and app (tcl).
Regards
Shane
Brian Fahrlander wrote:
>
> On Tue, 11 Jun 2002 05:48:27 +0100, "Shane Kennedy" <[EMAIL PROTECTED]> wrote:
>
> > We have an LTSP system which is used in Airpor
us implementation of netboot, and LTSP. I have put screening
around different componenet in the client (OEM panel PC, with SBC, TFT,
and Touchscreen, but they continue to misbehave.
Can anyone make any suggestions ?.
T.I.A.
Shane
___
, you WILL need
air moving thro the box if you want a decent lifespan. Another point,
which I have enquired about, but so far, haven't had an answer, is that
many mainboards will work on +5 & +12, but with some i/o
restrictions.
i.e. RS232 doesn't meet full spec
What boot mechanism IS used with MS App servers ?. Can thin-client boot
on Linux be adapted to conform, rather than adapt the client itself ?.
Shane
Brian Fahrlander wrote:
>
> A few years ago I went to great lengths to find a *good* Wyse60 termi=
> nal emulator to mesh Lin
Would there be any advantage in swapping to ramdisk ?. Is ramdisk any
more space efficient than regular ram i.e. Compressed ?.
Shane
[EMAIL PROTECTED] wrote:
>
> Danny,
>
> Yes, it's possible. But, it's not a built-in
> feature of LTSP.
>
> Assuming you are
e question.
Shane
Julius Szelagiewicz wrote:
>
> Brian,
> you want to reboot from time for one reason only: the two of us
> didn't write all the software we run, so some of it isn't perfect. there
> are otherwise nice programs that that forget to return memory to
This guy's built a time machine He's in 2005
Donnie Linville wrote:
>
> I have LTSP 3.0 ,core,kernel,xfonts,and xcore downloaded and
> installed.In /opt/ltsp/templates I did the ./ltsp_initialize.I then took the
> dhcpd.conf.example and made it /etc/dhcpd.conf. I then gave my e
In this situation, where there IS a local hard drive, IS there any
advantage to LTSP/netboot over a system with minimal services running X
with remote apps ?.
Shane
Matt Filizzi wrote:
>
> I was searching through the email archives for an answer to this and
> only found more questions
runtime fs either in ramdisk, or Hdd and do similar 'pivot root' as
the clients do.
Regards to all
Shane
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/l
solve many problems.
Regards
Shane
Kai Schmidt wrote:
>
> - Original Message -
> From: "mslicker" <[EMAIL PROTECTED]>
> To: "Kai Schmidt" <[EMAIL PROTECTED]>
> Cc: "Arthur H. Johnson II" <[EMAIL PROTECTED]>;
> <[EMAI
Has anyone put together a sequential list of the startupo scripts/prog's
used by LTSP client ?. Being a linux amateur, I have difficulty in
tracking the control sequence.
Shane
_
Ltsp-discuss mailing list. To un-subs
will try to send at the same time, crash, then all try again.
Shane
Evgueni Limarenko wrote:
>
> I've got occasional Kernel Panic during client's boot up.
> The ratio of successful attempts to unsuccessful is about 2:1.
> See the console messages below (I type it in manual
Have a look at this page.
http://www.dkfz-heidelberg.de/spec/linux/modeline/
Shane
LTSP admin... Can you put this tool on your website. I have seen several
enquiries of this nature.
Graeme Bruton wrote:
> To reply to my own post.. (goes a little red around the ears)
>
> O
I'm not sure if this is what you want.
Try
xset s off
Shane
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP
Are there any Assembler/Machine code programmers out there ?.
What is the shortest way of getting 0xff into Addr 0x443 ?. Hex code
please for boot ROM patch.
T.I.A.
Shane
_
Ltsp-discuss mailing list. To un-subscribe, or
Hi Y'all,
Some weeks ago, I enquired where I might get the source or hex file
for boot rom for NE2k-PCI.
Jim I thing pointed me to sourceforge, but I haven't found it. I want
to modify my rom to set 0x443 to 0xff to start the board's watchdog at
power up. Can anyon
.
Shane
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
Can anyone provide me with source code for rom image for NE2K-pci ?. I
want to add a (very) small patch to switch on my watchdog at power up,
in case of crashes, or timeouts before OS loads and starts.
Shane Kennedy
_
Ltsp
Hi Y'all, Can someone help on a very basic problem please.
RH7.2 Server, provides dhcp OK, but client reports "Loading kernel",
then sleeps.
tcpdump on Server reports "udp port tftp unreachable (DF) [tos 0xc0]".
I have built several systems before, but cannot find the
We use a touchscreen with our tcl/tk app.
We 'autologin' as user, then have a .xinitrc which says: wish 'appname.tcl'
No Gnome, KDE , or any desktop. Just the app'.
Shane
> > Date: Sun, 11 Nov 2001 15:06:08 +0200
> > From: yossi <[EMAIL PROTECTED]>
&
This is a UK site, though I am sure they can direct anyone to other dist's.
Any interest ?. 2.5" flash works with linux, and I expect the other IDE
compatibles would too.
Regards to all
Shane
http://www.milesie.co.uk/asp/s
Does anyone have any particular preferences on distributions for use
with LTSP ?. I have been told that RedHat tends to contain loads of
patches, rather than cleanly compiled code. Is that justified ?.
Shane
_
Ltsp-discuss
- Original Message -
From: Shane Kennedy <[EMAIL PROTECTED]>
To: Arthur H. Johnson II <[EMAIL PROTECTED]>
Sent: 03 October 2001 20:38
Subject: Re: [Ltsp-discuss] LTSPxinitrc
> Thanks for the offer, but I eventually found the files. Now, the client
in
> question
How soon. My unit is expected to be matt black powder coated steel, and 1st
off available end October. See earlier eMail for details. Price TBA.
dependant on quantity discount.
Shane
- Original Message -
From: Dave Shiels <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent:
re : removing directories. do you use 'rm -rf dirname'
?
Re nfs : Use 'tail /var/log/messages' to see what
requests are made of the server.
this will show something like
mount requested by 'hostname' for /tftpboot
request refused, permission denied.
for about $40. Comments please.
Is the reduced height worth an extra $40 ? 2 1/2" as opposed to 4". Is
"connectors to front" any benefit ?. Given that you need over 3" space at
back for vga plug anyhow, the front cover would extent that much to the
front instea
cost ($100?) to LTSP subscribers,
partly to do my bit to undermine MS, but mostly, because the LTSP, and
etherboot groups have been very free with their time in helping me. I will
also have one slightly higher to take a CD/DVD, Fdd, and Hdd (Server ?).
Regards
Shane Kennedy
- Original Message ---
Check you server processes. ps -ax
Generally there should be about 8 jobs listed as '[nfsd]' if
you have nfs running.
Regards
Shane
- Original Message -
From:
Asaf Maruf Ali
To: [EMAIL PROTECTED]
Sent: 27 September 2001 12:38
Subject: [Ltsp-di
77 matches
Mail list logo