Am Donnerstag, dem 10.10.2024 um 10:44 -0400 schrieb Neal Becker:
> Thank you for your help.
> Please see attached MWE.
Oh, I forgot: You need to check "Custom: Here definitely" either in
Document > Settings > Float Settings > Position on page or in the
settings dialog of the individual float
--
On Thu, Oct 10, 2024 at 9:29 AM Jürgen Spitzmüller
wrote:
> Am Donnerstag, dem 10.10.2024 um 08:56 -0400 schrieb Neal Becker:
> > Doesn't seem to work. I added the local layout as you suggested.
> > Then I tried insert float/algorithm. I'm guessing this is how I use
Am Donnerstag, dem 10.10.2024 um 08:56 -0400 schrieb Neal Becker:
> Doesn't seem to work. I added the local layout as you suggested.
> Then I tried insert float/algorithm. I'm guessing this is how I use
> the algorithm? This gives an error: not in outer par mode. Am
&g
Doesn't seem to work. I added the local layout as you suggested. Then I
tried insert float/algorithm. I'm guessing this is how I use the
algorithm? This gives an error: not in outer par mode. Am I missing
something?
On Thu, Oct 10, 2024 at 3:09 AM Jürgen Spitzmüller
wrote:
>
Am Mittwoch, dem 09.10.2024 um 09:25 -0400 schrieb Neal Becker:
> How do I write an algorithm in a LyX beamer slide?
tl;dr
Put the following in Document > Settings > Local Layout:
Float
Type algorithm
GuiName Algorithm
How do I write an algorithm in a LyX beamer slide?
--
*Those who don't understand recursion are doomed to repeat it*
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
Am 28.07.21 um 16:47 schrieb Wolfgang Engelmann:
Back to the long algorithm:
but being a float it cannot have a pagebreak
Listings as an alternative?
a listing can be a float, too
but again: being a float it cannot have a pagebreak
sure, but a listing can have a caption with a number
Back to the long algorithm:
but being a float it cannot have a pagebreak
Listings as an alternative?
a listing can be a float, too
but again: being a float it cannot have a pagebreak
it is broken, if too long, same as a too long algorithm
Wolfgang
--
lyx-users mailing list
lyx-users
Am 27.07.21 um 08:49 schrieb Wolfgang Engelmann:
Am 24.07.21 um 20:37 schrieb Herbert Voss:
Am 24.07.21 um 14:57 schrieb Wolfgang Engelmann:
How could one handle a long algorithm in a float which is too long
for a page?
Listings would be a bad alternative.
A float cannot have a
Am 24.07.21 um 20:37 schrieb Herbert Voss:
Am 24.07.21 um 14:57 schrieb Wolfgang Engelmann:
How could one handle a long algorithm in a float which is too long for
a page?
Listings would be a bad alternative.
A float cannot have a pagebreak. Use a non floating environment.
Why is
Am 24.07.21 um 14:57 schrieb Wolfgang Engelmann:
How could one handle a long algorithm in a float which is too long for
a page?
Listings would be a bad alternative.
A float cannot have a pagebreak. Use a non floating environment.
Why is litings a "bad" alternative?
Herbert
--
How could one handle a long algorithm in a float which is too long for a
page?
Listings would be a bad alternative.
Wolfgang
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users
gt; On 09/20/2018 10:14 AM, Pascal Francq (Mailing lists) wrote:
>>> Hi,
>>> I try to change the change the numbering schema of algorithms in the
>>> form 'A1', 'A2', etc.
>>> So I add the following command in the preamble of the document
27;A1', 'A2', etc.
So I add the following command in the preamble of the document:
\renewcommand{\thealgorithm}{A\arabic{algorithm}}
But LyX says it "thealgorithm" is undefined.
Any one an idea?
Thanks in advance.
Can you post a minimal example showing the current version of
Thank for you answer, but it doesn't work either.
To recapitulate:
1. I have a LyX document using the "algorithm2e" module.
2. Each time, I add new algorithm float in my document, it's label is an
increasing number (1 for the first algorithm, 2 for the second, etc.).
3. I
ommand{\thealgorithm}{A\arabic{algorithm}}
But LyX says it "thealgorithm" is undefined.
Any one an idea?
Thanks in advance.
Can you post a minimal example showing the current version of what you
are trying to change, and then indicate in it somewhere "I want to
change this piece he
On 09/20/2018 10:14 AM, Pascal Francq (Mailing lists) wrote:
Hi,
I try to change the change the numbering schema of algorithms in the
form 'A1', 'A2', etc.
So I add the following command in the preamble of the document:
\renewcommand{\thealgorithm}{A\arabic{algorit
Hi,
I try to change the change the numbering schema of algorithms in the
form 'A1', 'A2', etc.
So I add the following command in the preamble of the document:
\renewcommand{\thealgorithm}{A\arabic{algorithm}}
But LyX says it "thealgorithm" is undefined.
Any
I'm preparing camera ready version for IEEE conference, and I've hit a snag.
I inserted an algorithm float, and it got placed at the top of a column.
But the top of the 2 columns don't align! Any ideas? I've included a
snapshot showing the problem area.
Hello forum,
I think I found kind of a solution to the issue. Instead of having program
listing inside floating algorithm , I am having just the program listing
and now the code snippets are split automatically.
But I am encountering another issue. How do I enter some kind of caption to
the
Hello forum,
I am trying to insert float algorithm into the report I am writing. I did
the following:
1. Insert->Float->Algorithm
2. Inside Algorithm I inserted program listing
3. Wrote down the procedure.
When I generate the pdf , the algorithm is over-lapping the page number .
Is it po
Hello forum,
I am trying the write algorithm by using the insert->float->algorithm. But
I cannot insert indentation while writing down the algorithm.
Ant reference/hint to resolve this issue?
Thanks
Am Montag 08 September 2014, 12:58:33 schrieb Китов Виктор:
> I have two versions of Lyx simultaneously: Lyx 2.0.4 and Lyx 2.1.1 under
> Windows 7. Neigher of them has menu option to insert an algorithm - if I go
> to Insert->Float there is no option to insert an algorithm! Please te
Hello all,I have two versions of Lyx simultaneously: Lyx 2.0.4 and Lyx 2.1.1 under Windows 7.Neigher of them has menu option to insert an algorithm - if I go to Insert->Float there is no option to insert an algorithm! Please tell what to do, because visualising algorithms is a very conveni
I found out the solution. Just insert in the Latex Preamble:
\usepackage{chngcntr}
\counterwithout{figure}{chapter}
\counterwithout{equation}{chapter}
\counterwithout{algorithm}{chapter}
and you got simple (1, 2, 3, ...) numbering of figures, equations and
algorithms.
Cheers,
Matej.
On
Hello,
I would like to have simple document-wide numbering of the algorithm floats
(1, 2, 3, ...).
Currently the algorithm floats are defined as:
\floatstyle{ruled}
\newfloat{algorithm}{tbp}{loa}[chapter]
\providecommand{\algorithmname}{Algorithm}
\floatname{algorithm}{\protect\algorithmname
Start with an algorithm float (Help > Embedded Objects, section 3.2). Inside the
float, I would try the Listings package (Help > Embedded Objects, section 8).
Listings has a boatload of options; you'll want to consult its user manual to
get the precise format you desire.
Paul
On Tue, Sep 4, 2012 at 8:23 AM, Ivo Couckuyt wrote:
> Hi,
>
> I found the problem in the layout files:
> The actual problem lies in numreport.inc which adds a chapter counter to the
> algorithm float.
>
> numreport.inc is included in svcommon.inc (after all std*.inc includes
On 12/27/2012 05:23 PM, Regina Anger wrote:
> Hi,
>
> Updating memoir helped, it works now like a charme. Thanks a lot!
> I wonder however, how can Fedora distribute packages *that* old.
>
> Thx, Regi
There are two reasons:
* due to the license of texlive packages (the license was incorrect
or
Hi again,
> http://fedoraproject.org/wiki/Features/TeXLive (search for the
> instructions regarding Fedora 17)
> If you follow the instructions there you can update the packages to
> newer versions.
>
> For Fedora 18 (to be released in January) and newer the packages there
> are the default.
Gla
Hi,
Updating memoir helped, it works now like a charme. Thanks a lot!
I wonder however, how can Fedora distribute packages *that* old.
Thx, Regi
On 12/27/2012 04:07 PM, Regina Anger wrote:
> Does this mean I manually have to update my latex installation? Is
> there any way you can recommend, without re-compiling my whole
> software-stack?
> The whole situation is a bit sad, as I am sitting behind a ~100kBit/s
> GPRS line :/
>
> Thx, Reggi
On 12/27/2012 11:07 AM, Regina Anger wrote:
Hello Jürgen,
> Your file compiles fine here. This is with most recent TL 2012 and LyX
> 2.0.6dev. Maybe some of your packages are outdated. The versions are
printed
> to the log file if you enter \listfiles into the preamble. Here's mine:
I am usi
Regina Anger wrote:
> Does this mean I manually have to update my latex installation? Is there any
> way you can recommend, without re-compiling my whole software-stack? The
> whole situation is a bit sad, as I am sitting behind a ~100kBit/s GPRS line
> :/
Probably updating memoir will suffice. Yo
Hello Jürgen,
> Your file compiles fine here. This is with most recent TL 2012 and LyX
> 2.0.6dev. Maybe some of your packages are outdated. The versions are printed
> to the log file if you enter \listfiles into the preamble. Here's mine:
I am using the most recent packages (lyx, latex, ...)
Regina Anger wrote:
> Hi folks,
>
> I would like to insert an algorithm float in my document.
> However, even for empty documents, doing so results in:
>
> LaTeX Error: Command \newfloat already defined.
> LaTeX Error: Missing \begin{document}.
>
>
> Any idea w
Hi,
I found the problem in the layout files:
The actual problem lies in numreport.inc which adds a chapter counter to the
algorithm float.
numreport.inc is included in svcommon.inc (after all std*.inc includes) which
in its turn is included by svglobal.layout/svglobal3.layout etc.
Of course
add one algorithm float (it's the float that generates the error, not the
algorithm itself).
- generate pdf
I obviously could downgrade again, but I have read somewhere that lyx 2.0.4
includes better sprinter (svjour3/svglobal) layouts. Any idea on how I can fix
this quickly ?
If there is no sim
Hello
The svjour3 class used to work fine in Lyx 2.0, even with the algorithm float.
I just upgraded to Lyx 2.0.3 on two different computers, and I get the error,
! LaTeX Error: No counter 'chapter' defined.
See the LaTeX manual or LaTeX Companion for explanation.
Type H for imme
Guenter Milde wrote:
> On 2012-03-07, Neal Becker wrote:
>> I can insert my code listing as a float in 2 ways, it appears.
>
>> I can insert an algorithm float, then insert a program listing into it. This
>> results in a caption 'Algorithm ...'
>
>>
On 2012-03-07, Neal Becker wrote:
> I can insert my code listing as a float in 2 ways, it appears.
> I can insert an algorithm float, then insert a program listing into it. This
> results in a caption 'Algorithm ...'
> Else, I can insert a program listing, enter the setti
I can insert my code listing as a float in 2 ways, it appears.
I can insert an algorithm float, then insert a program listing into it. This
results in a caption 'Algorithm ...'
Else, I can insert a program listing, enter the settings dialog, and select
float. I can then add a capti
2011/1/26 Niko Schwarz :
> Hi, I'm using LyX with the springer LNCS article class. In my previous
> work, all the program listings I had to write could reasonably well be
> called "algorithms," so I used the algorithm class in a float. This
> time, they aren't
Niko Schwarz googlemail.com> writes:
>
> Hi, I'm using LyX with the springer LNCS article class. In my previous
> work, all the program listings I had to write could reasonably well be
> called "algorithms," so I used the algorithm class in a float. This
> ti
Hi, I'm using LyX with the springer LNCS article class. In my previous
work, all the program listings I had to write could reasonably well be
called "algorithms," so I used the algorithm class in a float. This
time, they aren't really algorithms, they're just prog
Jaime Huerta Cepas wrote:
Hi all,
I wonder if there is any way of allowing Algorithm Float boxes to start in
the middle of one page, and end in the next one. I'm using these kind of
floats to include pieces of highlighted source code, so I guess text could
be perfectly splitted.
Then a
True. It seems that Floats, by definition, cannot be split into two pages.
Given that I don't need a real float for inserting my example code snippets,
I found a better solution than manual separation of content.
I'm now using an environment that mimics an algorithm float:
\newco
Jaime Huerta Cepas writes:
>
> Hi all,
>
> I wonder if there is any way of allowing Algorithm Float boxes to start in
> the middle of one page, and end in the next one. I'm using these kind of
> floats to include pieces of highlighted source code, so I guess text could
Hi all,
I wonder if there is any way of allowing Algorithm Float boxes to start in
the middle of one page, and end in the next one. I'm using these kind of
floats to include pieces of highlighted source code, so I guess text could
be perfectly splitted.
Thanks!
Jaime
Hi all.
I'm using LyX, and I'm stucked in a problem: I'm inserting pseudo-code (with
some math elements inside) in a algorithm float.
When I print / create a pdf the float it's bigger than the page, but it
doesn't automatically "split" itself.
Is there a way
bigblop schrieb:
When I insert and algorithm float the text in the caption appears as the
title (in the top) of the algorithm. I like having this title but would also
like to have a caption. Is it possible to get both the title at the top and
a caption in the bottom?
The thing you call title
When I insert and algorithm float the text in the caption appears as the
title (in the top) of the algorithm. I like having this title but would also
like to have a caption. Is it possible to get both the title at the top and
a caption in the bottom?
--
View this message in context:
http://n2
t file and change the algorithm float
definition.
Somewhere below the line
Input stdfloats.inc
add the definition
Float
Type algorithm
GuiName Algorithm
Placement tbp
Extension loa
NumberWithin
A. Scottedward Hodel wrote:
> After further testing, I duplicated the problem by using Insert ->
> Float -> algorithm to create a float inset: in this circumstance the
> code above is written. When the LaTeX code was imported, the
> algorithm environment was recogn
kage:
! LaTeX Error: Command \algorithm already defined.
Or name \end... illegal, see p.192 of the manual.
I used the command line to translate LyX to LaTeX,
lyx --export latex WahbaSummary.lyx
and found the following code in the .tex file:
%% LyX specific LaTeX
2e.sty package:
! LaTeX Error: Command \algorithm already defined.
Or name \end... illegal, see p.192 of the manual.
I used the command line to translate LyX to LaTeX,
lyx --export latex WahbaSummary.lyx
and found the following code in the .tex file:
dent's PhD dissertation into LyX to use the "track
changes" function for markup. Unfortunately, there seems to be a
conflict between some LyX default behavior and the algorithm2e.sty package:
! LaTeX Error: Command \algorithm already defined.
Or name \end... illegal, se
I'm importing a student's PhD dissertation into LyX to use the "track
changes" function for markup. Unfortunately, there seems to be a
conflict between some LyX default behavior and the algorithm2e.sty
package:
! LaTeX Error: Command \algorithm already defined.
Hi,
Please can you tell me how I can number the lines in an algorithm?
Also, I have an algorithm that spans more than a page, but just disappears
after the 1st page?
Many thanks,
Thomas Bolton
Hello,
I'm having a weird problem with Algorithm Floats. I am using a master
document with several child documents (one for each chapter). The odd thing
is that when I compile/pdf the child document by itself, the algorithm
floats seem to work just fine. However, when I try to compile/pd
Salve a tutti, ho un problema con Lyx.
Utilizzo i comandi del package algorithm2e per la scrittura di algoritmi, ma
alla compilazione, vengono fuori tanti errori quanti sono i comandi di
algorithm2e utilizzati. Tutti i messaggi di errori sono del tipo
"Undefined control sequence".
Premetto che ho
Ok, I found the problem (I think). LyX makes an error importing the raw
LaTeX. (I pasted your code into an algorithm the first time, which is
why it worked for me.)
-
LaTeX Error: Something's wrong--perhaps a missing item.
...uclid} \
[EMAIL PROTECTED] wrote:
Sorry if this is obvious, but I've been searching for quite a while
without luck. Basically I would like to use Lyx and edit pseudocode
using packages algorithm/algorithmic/algpseudocode. Preferably the
notation using arrows for assignment, as demonstrated i
Sorry if this is obvious, but I've been searching for quite a while without
luck. Basically I would like to use Lyx and edit pseudocode using packages
algorithm/algorithmic/algpseudocode. Preferably the notation using arrows
for assignment, as demonstrated in the .tex file.
This .tex
Daniel Janzon wrote:
Hi,
When setting language to Swedish, LyX automatically translates
Abstract, Table, Figure and References without problems. However, LyX
doesn't seem to be able to translate Algorithm. How can I add the
capability to translate Algorithm floats?
Document->
Hi,
When setting language to Swedish, LyX automatically translates
Abstract, Table, Figure and References without problems. However, LyX
doesn't seem to be able to translate Algorithm. How can I add the
capability to translate Algorithm floats?
/ Daniel
Thomas Schmidt schrieb:
\newfloat{Xalgorithm}{tbp}{loa}
\floatname{Xalgorithm}{Algorithmus}
\newcommand{\theHalgorithm}{\theHXalgorithm}
\renewenvironment{algorithm}[1][tbp]
{\begin{Xalgorithm}[#1]}{\end{Xalgorithm}}
\numberwithin{Xalgorithm}{chapter}
It is unclear to me what you are getting
On Mon, 27 Aug 2007 23:26:11 +0200, Alan G Isaac <[EMAIL PROTECTED]> wrote:
> On Mon, 27 Aug 2007, Thomas Schmidt apparently wrote:
>>> \newfloat{Xalgorithm}{tbp}{loa}
>>> \floatname{Xalgorithm}{Algorithmus}
>>> \newcommand{\theHalgorithm}{\theHXalgorithm}
>
Damn your right.
I changed the
\listof{algorithm} to \listof{Xalgorithm} because i defined the algorithm box
new for hyperref.
After this change all goes well..
From now i will call myself a guy how doesn't see the trees because there is
so much forest. ;)
Thanks Alan for your
On Mon, 27 Aug 2007, Thomas Schmidt apparently wrote:
>> \newfloat{Xalgorithm}{tbp}{loa}
>> \floatname{Xalgorithm}{Algorithmus}
>> \newcommand{\theHalgorithm}{\theHXalgorithm}
>> \renewenvironment{algorithm}[1][tbp]
>> {\begin{Xalgorithm}[#1]}{\end{Xalgorithm}
First problem is that I do not see:
\usepackage{float}
First problem is that I do not see:
\listof{Xalgorithm}
Follow the example at the bottom of
http://www.andy-roberts.net/misc/latex/latextutorial6.html
and then look at the float.sty documentation
www.tug.org/TeXnik/floats/newFloat.pdf
hth,
Can nobody help me?
I have just to days for my thesis and there has to be an algorithm toc.
Regards
Thomas
On Fri, 24 Aug 2007 12:07:04 +0200, Thomas Schmidt <[EMAIL PROTECTED]> wrote:
> Hello
>
> I have to ask for the Algorithm TOC (Table of Contents) field which creat
Hello
I have to ask for the Algorithm TOC (Table of Contents) field which creates a
strange mistake i can't reproduce. I tried to build a lyx file which has also
this failure but there it works.
if im inserting a algorithm toc or via Menü point (Insert -> TOC ->
Algorithm...
Thomas Schmidt schrieb:
For me a algorithm float object is a normal float object like the other ones.
Why i have to insert so many instructions to the preambel of lyx just for this
float object?
Can users expect a better solution for future Versions of lyx?
The problem is the underlying
On Mon, 20 Aug 2007 18:39:16 +0200, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Thomas Schmidt schrieb:
>
>> I defined a algorithm float object and inserted a cation and a label to
>> ist, because i want to reference to this algorithm box.
> > With referencing to t
Thomas Schmidt schrieb:
I defined a algorithm float object and inserted a cation and a label to ist,
because i want to reference to this algorithm box.
> With referencing to this box, lyx can translate the file to a pdf. But if i'm referencing from my
text with the cross r
Hello.
today i have a problem on working with lyx. I defined a algorithm float object
and inserted a cation and a label to ist, because i want to reference to this
algorithm box. . With referencing to this box, lyx can translate the file to a
pdf. But if i'm referencing from my text wit
Docs (including examples) are at
http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ if
you're curious. Bo's suggestions resonate with me for code listings,
but for mathematical statements of algorithms, I prefer algorithmicx.
I have not used listings to write pseudocode, but I g
Neal Becker wrote:
What do you like for documenting an algorithm?
I'm thinking of something like an itemize environment (displaying structure
via indentation), but without bullets.
I'm writing from limited experience, but for expressing an algorithm
(rather than actual comput
Cool.
Looking at listings.dvi (the original latex package doc), I see in that
things like 'a <= b' were printed as 'a \le b'. Does listings do this
automatically? (Doesn't seem be be doing that in my test)? Or, maybe this
used mathescape?
This is an advanced feature of listings called literat
Bo Peng wrote:
> On 7/10/07, Neal Becker
> <[EMAIL PROTECTED]> wrote:
>> What do you like for documenting an algorithm?
>>
>> I'm thinking of something like an itemize environment (displaying
>> structure via indentation), but without bullets.
>
>
On 7/10/07, Neal Becker <[EMAIL PROTECTED]> wrote:
What do you like for documenting an algorithm?
I'm thinking of something like an itemize environment (displaying structure
via indentation), but without bullets.
verbatim or lyx-code environment, or preferably the newly introduc
What do you like for documenting an algorithm?
I'm thinking of something like an itemize environment (displaying structure
via indentation), but without bullets.
Gustavo Felisberto schrieb:
I inserted a float algorithm, added a label and when trying to cross reference
it and then export to pdf I get an error:
"
\vref{alg:TCP-Connection}
The control sequence at the end of the top line
of your error message was never \def'ed.
The reason f
I inserted a float algorithm, added a label and when trying to cross reference
it and then export to pdf I get an error:
"
\vref{alg:TCP-Connection}
shows the steps that are taken when a computer
The control sequence at the end of the top line
of your
Hi Helge,
Thanks for the information and clrification regarding floats.
I will be updating to the new version of LyX soon and will try out the insert
program listing feature.
Regards,
graham
Graham Griffiths wrote:
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
There is no such thing as a multi-page float.
If it isn't a float - then it can continue ont
Thanks Bo, I will upgrade and try your suggestion.
Regards,
Graham
On 5/30/07, Graham Griffiths <[EMAIL PROTECTED]> wrote:
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
You can use the new listings inset (and child document)
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
Thanks
John Pye schrieb:
Can anyone tell me if any of those things (lmodern, url, listings,
hyperref) cause problems with Algorithm floats?
There are some redefinitions needed to get algorithms perfectly work with hyperref, see the
EmbeddedObjects manual. I hope you find there a solution.
regards
Hi all
I have recently tried to put an 'Algorithm' float into one chapter of my
thesis (each chapter being a separate file). When I render that chapter
by itself in pdflatex, it works OK.
But when I attempt to render the whole thesis, it doesn't work. I
presume there is some
my document, thank you, it should be
ok for the moment, I'll go back to the algorithm-float later. By now I
will press the devel people to solve the problem by writing to the
list... I'm sorry not to be a TeXnician, there's many little things I
would be glad to be helpful with (even th
feature.
In your case: Don't use the algorithm float. Instead, write in ERT
\begin{algorithm}
\end{algorithm}
Then you can load all packages manually in the preamble by entering:
\usepackage{float}
\usepackage{hyperref}
\floatstyle{ruled}
\newfloat{algorithm}{tbp}{loa}
\floatname{algor
The hyperref README says:
6 PACKAGE COMPATIBILITY
===
Currently only package loading orders are available:
[...]
algorithm
-
\usepackage{float}
\usepackage{hyperref}
\usepackage[chapter]{algorithm
}
So float (which is modified by hyperref) and hyperref have
Ares wrote:
> there's not much to play with.
The hyperref README says:
6 PACKAGE COMPATIBILITY
===
Currently only package loading orders are available:
[...]
algorithm
-
\usepackage{float}
\usepackage{hyperref}
\usepackage[chapter]{algorithm}
So floa
egin_layout Caption
\begin_inset LatexCommand \label{fig:Sample-figure}
\end_inset
Sample figure
\end_layout
\end_inset
\end_layout
\begin_layout Standard
This is an algorithm
\begin_inset LatexCommand \ref{alg:Test}
\end_inset
.
\end_layout
\begin_layout Standard
\begin_inset Float algorithm
> "Ares" == Ares <[EMAIL PROTECTED]> writes:
Ares> I made some tests and I guess the problem is definetly related
Ares> to package hyperref: \usepackage[bookmarks]{hyperref}
Could you try to play with the ordering of the various bits in the
preamble of the TeX file? One reason why we do not
ables \addcontentsline{toc}{chapter}{Elenco delle tabelle}
I think there's something that messes up things with the algorithm stuff...
Regards,
Diego
Ares wrote:
> I can attach the preamble, or the whole document if you think it helps.
I still don't understand. Please send me a stripped down version of the
document privately.
Jürgen
1 - 100 of 220 matches
Mail list logo
