On Tue, May 17, 2011 at 9:40 AM, patrick.oesch...@bluewin.ch
patrick.oesch...@bluewin.ch wrote:
i am looking for a IPSEC accelerator board for a company firewall to
terminate multiple IPSEC tunnels (branches)
expected IPSEC traffic: ~500mbit/s (100 tunnels)
any recommendations for a *pci
If you've disabled pf and it doesn't, then yes, possibly.
If the network is configured like this:
192.168.1.0/24]192.168.1.1(em0)[Router]10.1.0.1(em1)[10.1.0.0/21
Setting the default routes to the required interface on each side
should allow packets to flow freely from end to end.
Thanks for your reply and I send my request to the misc list now!
I've just installed openBSD on a AOD255E Netbook and I've some problem with
Ethernet Card:
Here's my dmesg :
===
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
thank you for your input
why 'only' 400mbit?
the specs say 2gbit for BCM5862 in a pci-e 4x slot...
sounds like quite some overhead writing/ getting packets to/from the card - i
would have expected it higher but i do not want to question your tests
*hmmm*
Sent from Pat's iPhone
On 18.05.2011, at
On Tue, May 17 2011 at 39:21, patrick.oesch...@bluewin.ch wrote:
...gives me some headache...
system1: (openbsd 4.9)
em0 192.168.1.54 (same /24 subnet as system2)
/etc/isakmpd/isakmpd.
conf:
Listen-on= 192.168.1.54
isakmpd -K
system2: (openbsd 4.9)
em0 192.168.1.200 (same /24
On Wed, May 18, 2011 at 10:06 AM, Patrick Oeschger
patrick.oesch...@bluewin.ch wrote:
thank you for your input
why 'only' 400mbit?
the specs say 2gbit for BCM5862 in a pci-e 4x slot...
sounds like quite some overhead writing/ getting packets to/from the card -
i would have expected it
( http://integrasolutions.mx )
Desarrollando ideas,
creando soluciones.
Hola ,
En INTEGRASOLUTIONS nos interesa transmitirte nuestro conocimiento y
experiencia en Marketing Publicitario. Tenemos un paquete especial para dueC1os
de negocio o departamento de Mercadotecnia en tu empresa, nuestro
Hi,
running IPsec in multiple rdomains is supported since about a year and
should work just fine. iked(8) has extended support for it but it
should also work with isakmpd(8).
- You need to create an enc(4) interface for the non-default rdomain.
Traffic will only flow if there is an enc(4)
On Sun, 15 May 2011, Nick Holland wrote:
What dissapoints me the most, is that there don't exist USB ports and
they might not even be supported, the pc
is from 1998.
I could use rtorrent with screen to download stuff to an external hard drive..
But I will check on that when I find the time to
Buenos dC-as.
B?Tu empresa estC! viviendo algC:n tipo de cambio organizacional?
Cuenta con nosotros para hacer de esta experiencia un proceso exitoso de
aprendizaje, crecimiento y desarrollo para tu empresa.
ConsultorC-a estC)s en donde estC)s, contamos con oficinas que atienden a toda
la
On Wed, 18 May 2011, David Coppa wrote:
On Wed, May 18, 2011 at 12:16 PM, David Vasek va...@fido.cz wrote:
On Sun, 15 May 2011, Nick Holland wrote:
What dissapoints me the most, is that there don't exist USB ports and
they might not even be supported, the pc
is from 1998.
I could use
Hi there,
if i disable pf, it will not work (except when trying from router itself via
ssh). Here some output from hostname.ifs and mygate, my routing table. Would
be most grateful for any tips that help solving this.
Best regards,
D
cndlne001'root(~) cat /etc/hostname.sis0
inet 10.1.3.19
On Wed, 18 May 2011 08:30:43 +0200
Meyer Jerome jerome.me...@iwbtelekom.ch wrote:
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
Attansic Technology L2C rev 0xc1 at pci1 dev 0 function 0 not
configured
...
Put a route !?
2011/5/18 David Schulz mailingli...@ironwhale.com
Hi there,
if i disable pf, it will not work (except when trying from router itself
via
ssh). Here some output from hostname.ifs and mygate, my routing table.
Would
be most grateful for any tips that help solving this.
Best
Have you tried doing the following:
sysctl net.inet.ip.forwarding=1
This effectively turns OpenBSD into a router. If you also need to handle, IPV6
traffic:
syscttl net.inet6.ip6.forwarding=1
To make this consistent across reboots, edit the sysctl.conf file.
Well for once i thought the Route is listed there already:
Default Gateway:
default10.1.3.1 UGS03 - 8
sis0
And everything to the 192. Subnet out via sis1
192.168.1/24 link#2 UC 10 - 4
sis1
So i have to
3. Save the diff to a file.
Patch your tree. For the diff you mentioned:
# cd /usr/src
# patch -p0 file_with_diff
And now that sthen@ has commited those changes, you can skip this step.
You just have to wait for your mirror of choice to catch up.
Hi
-Urspr|ngliche Nachricht-
Von: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] Im Auftrag
von roberth
Gesendet: Mittwoch, 18. Mai 2011 16:05
An: misc@openbsd.org
Betreff: Re: Ethernet on AOD255E
On Wed, 18 May 2011 08:30:43 +0200
Meyer Jerome jerome.me...@iwbtelekom.ch wrote:
CENTRO DE ESTRATEGIAS PARA EL DESARROLLO EMPRESARIAL
PUCARA
PROXIMOS CURSOS
No espere mas y asista a los mejores eventos que solo PUCARA tiene para
usted.
Con nuestros servicios de capacitacion y consultoria buscamos
proporcionar bases solidas asi como mejoramiento continuo en el area.
Es por
En Tecnometrica tenemos una excelente promociC3n. El medidor de espesor TT-230
es especial para recubrimientos sobre bases no ferrosas. Con opciC3n de
mediciC3n en micras y milC)simas de pulgada.
AdemC!s visita nuestro blog
y descubre mC!s sobre nuestros productos.
Tel. (81)83705416
BoletC-n
How does it look in dmesg for this card?
Sent from my iPhone
On May 18, 2011, at 10:42, Joosep joos...@gmail.com wrote:
On Wed, May 18, 2011 at 10:06 AM, Patrick Oeschger
patrick.oesch...@bluewin.ch wrote:
thank you for your input
why 'only' 400mbit?
the specs say 2gbit for BCM5862 in a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 3 May 2011 21:25, Stuart Henderson s...@spacehopper.org wrote:
On 2011-05-03, annathemerm...@hush.com annathemerm...@hush.com
wrote:
So, I'm trying to create put my /tmp partition on my swap.
So I have a line like this in my fstab:
swap /tmp
Hi!
ubsec0 at pci5 dev 0 function 0 Broadcom 5862 rev 0x01: 3DES MD5 SHA1 AES
PK, apic 9 int 0 (irq 10)
Joosep
On Wed, May 18, 2011 at 8:56 PM, Maxim Bourmistrov
m...@alumni.chalmers.sewrote:
How does it look in dmesg for this card?
Sent from my iPhone
On May 18, 2011, at 10:42, Joosep
On Wed, 18 May 2011 17:41:32 +
annathemerm...@hush.com wrote:
I'm just trying to make it take advantage of the swap
encryption (random keys unlike a single key I have to remember the
password for);
bioctl or vnconfig and /dev/urandom maybe useful here
On 2011-05-18, annathemerm...@hush.com annathemerm...@hush.com wrote:
In -current it has been bumped to 2GB so you'll be able to use
more there.
A bit below, but now it works. I'm quite happy with stable. Unless
current fixes my X11 keyboard issues, I'd rather not deal with
current unless I
Installed 4.9 and fan starts blowing on startup. Here is sysctl hw.sensors:
hw.sensors.acpitz0.temp0=55.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.kate0.temp2=65.00 degC
dmesg:
OpenBSD 4.9 (GENERIC) #671: Wed Mar 2 07:09:00 MST 2011
On Wed, 18 May 2011 14:05:44 -0800
Michael ber...@opensuse.us wrote:
Installed 4.9 and fan starts blowing on startup.
Most systems are at full speed on boot.
# sysctl hw.setperf=30
Is that all I can do?
Uhm, just run ampd -C ?
# grep apmd /etc/rc.conf.local
apmd_flags=-C
Curious why
On Wed, May 18, 2011 at 11:27:14PM +0100, Mikolaj Kucharski wrote:
Hi,
I have smtpd(8) setup on one of my machines with TLS enabled. Each time
I start /usr/sbin/smtpd (as root) I'm getting following message:
no DH parameters found in /etc/mail/certs/re0.dh
using built-in DH
Hi,
For development on OpenBSD, I need a sun v120 machine in Eindhoven,
the Netherlands.
It turns out, I don't have a 64-bit big-endian machine (and suns are
just awesome).
Please contact me if you have one.
Thanks,
--
Ariane
On Tue, May 17, 2011 at 05:24:46PM -0500, Amit Kulkarni wrote:
Then I removed the vmmap diff and compiled kernel a reboot later,
firefox crashes are gone.
Ofcourse, only a few days from now, this won't work anymore. May 20 is
the planned vmmap day. Starting then, you won't be able to back out
On Thu, May 19, 2011 at 12:42:57AM +0200, Gilles Chehade wrote:
smtpd is just telling you that you did not generate Diffie-Hellman
parameters [see smtpd.conf(5) / starttls(8)], and that it will use
its own builtin parameters.
It is safe to ignore the message, but it is safer to actually
On Wed, May 18, 2011 at 3:14 PM, Michael ber...@opensuse.us wrote:
On Wed, May 18, 2011 at 2:29 PM, roberth rob...@openbsd.pap.st wrote:
On Wed, 18 May 2011 14:05:44 -0800
Michael ber...@opensuse.us wrote:
Installed 4.9 and fan starts blowing on startup.
Most systems are at full speed
On Thu, May 19, 2011 at 12:48:48AM +0200, Ariane van der Steldt wrote:
For development on OpenBSD, I need a sun v120 machine in Eindhoven,
the Netherlands.
It turns out, I don't have a 64-bit big-endian machine (and suns are
just awesome).
Request has been taken care of. :)
--
Ariane
On Thu, May 19, 2011 at 05:02:53AM +0200, Ariane van der Steldt wrote:
On Thu, May 19, 2011 at 12:48:48AM +0200, Ariane van der Steldt wrote:
For development on OpenBSD, I need a sun v120 machine in Eindhoven,
the Netherlands.
It turns out, I don't have a 64-bit big-endian machine (and suns
On Thu, May 19, 2011 at 3:17 AM, Michael ber...@opensuse.us wrote:
On Wed, May 18, 2011 at 3:14 PM, Michael ber...@opensuse.us wrote:
On Wed, May 18, 2011 at 2:29 PM, roberth rob...@openbsd.pap.st wrote:
On Wed, 18 May 2011 14:05:44 -0800
Michael ber...@opensuse.us wrote:
Installed 4.9
Kevin Chadwick ma1l1i...@yahoo.co.uk wrote:
On Wed, 18 May 2011 17:41:32 +
annathemerm...@hush.com wrote:
I'm just trying to make it take advantage of the swap
encryption (random keys unlike a single key I have to remember
the
password for);
bioctl or vnconfig and /dev/urandom maybe
36 matches
Mail list logo
