Hi
I am trying to connect to my aol account using a 3 com modem.
I have configured minicom to use device ttys1(com2) which is
the port device to which my external modem is attached.
I am trying to dial in and have entered the number and id/password in
the configuration for the aol account in
Michael Asbridge wrote:
Hi
I am trying to connect to my aol account using a 3 com modem.
I have configured minicom to use device ttys1(com2) which is
the port device to which my external modem is attached.
I am trying to dial in and have entered the number and id/password in
the
i cant give you much on the hanging altho i know lots have had trouble with
that,
but i can tell you this, AOL wont work with linux, it needs its software : (
sorry.
While I was in KDE I clicked on something to
change to a different window manager. Now when i type startx i
always go into fvwm...how do I get it to start KDE
instead?
Hi gang,
have some new info and I will recap some of the old for any newcomers. I
still haven't got it to work yet, but learned a couple valuable things.
First the Linux box has two network cards (eth0 and eth1)
The eth0 card is configured as 192.168.1.1 with a netmask of 255.255.255.0
The
On Sat, 26 Jun 1999, Roy Cormier wrote:
While I was in KDE I clicked on something to change to a different window manager.
Now when i type "startx" i always go into fvwm...how do I get it to start KDE instead?
desktopcfg
install and/or run desktopcfg
On Sat, 26 Jun 1999, Roy Cormier wrote:
While I was in KDE I clicked on something to change to a different window manager.
Now when i type "startx" i always go into fvwm...how do I get it to start KDE instead?
Whenever I login to Linux, every 5 seconds a message pops up sying this:
eth0: transmit timed out, status e426000, CSR12 00050cc, resetting...
What can I do to stop this? What is going wrong? Help! I'm using the Tulip driver for
my ethernet card. I have reinstalled 3 times already and am
On Sat, 26 Jun 1999, Michael Asbridge wrote:
Hi
I am trying to connect to my aol account using a 3 com modem.
I have configured minicom to use device ttys1(com2) which is
the port device to which my external modem is attached.
I am trying to dial in and have entered the number and
From: Rich McCabe [EMAIL PROTECTED]
The eth0 card is configured as 192.168.1.1 with a netmask of
255.255.255.0
OK, it sounds like your router is configured to be on a different
network. Assuming that your eth0 card is the one that's connected to
the router, set its IP to 10.0.0.x, where
Hi Dan,
I will give that a try. I am not sure what you meant by "where 2=x=254". I
think maybe a typo in there.
The reason for two ethernet cards is because the Cisco 675 is an external
router and it hooks up to a NIC with a crossover cable. So the first one is
for the router and the second is
On Sat, 26 Jun 1999, Dan Brown wrote:
From: Rich McCabe [EMAIL PROTECTED]
The eth0 card is configured as 192.168.1.1 with a netmask of
255.255.255.0
OK, it sounds like your router is configured to be on a different
network. Assuming that your eth0 card is the one that's
From: Rich McCabe [EMAIL PROTECTED]
I will give that a try. I am not sure what you meant by "where
2=x=254". I
think maybe a typo in there.
No typo -- x should be at least 2, but not more than 254.
Unfortunately, the standard keyboard doesn't have a "less than or equal
to" character, so I
Actually, I'm told that AOL *will* allow you to connect to their service
through another ISP so that's not entirely accurate...however, I think
you're correct that they still have to have the AOL software, at least for
mail, etc...
- Original Message -
From: Jason Riesa [EMAIL
Thanks Dan and Axalon,
I will give that a try in the morning. And Dan the Cisco is plugged directly
into the hub and I will be sending this E Mail with it. It works OK but I
want to use IP masquerading on the Linux box and have everything go through
it. Maybe not needed, but my experience so far
This is weird i never had a problem setting up sound rite from RH.50 to RH5.2
but now after installing Mabdrake 6.0 whenever i run setup up to the stage where
it says it's going to play a sample it suddenly says problems parsing etc etc at
line 346 CTL etc etc ... i open up conf.modules and
From: Rich McCabe [EMAIL PROTECTED]
I will give that a try in the morning. And Dan the Cisco is plugged
directly
into the hub and I will be sending this E Mail with it. It works OK
but I
want to use IP masquerading on the Linux box and have everything go
through
it. Maybe not needed, but my
- Original Message -
From: John Aldrich [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, June 26, 1999 9:29 PM
Subject: Re: [newbie] connecting to the internet
Actually, I'm told that AOL *will* allow you to connect to their service
through another ISP so that's not
You don't say which soundblaster you're having troubles with but I am now
successfully using the PCI128 w/mdk 6.0. I also had a problem with
sndconfig bombing out when it tried to play the test sound file and through
the news:alt.os.linux.mandrake newsgroup I discovered that if I replaced
mdk
19 matches
Mail list logo