On Sat, 18 Sep 1999, you wrote:
I somehow have managed to corrupt the descriptor table on my system.
When I try to boot into my system all I get at the boot prompt is LIL-
can anyone here on the list offer a suggestion as to what I need to do in
order to correct this ?
LIL-
The
Thanks Mark for understanding.
I suppose my video problem is with my darn (generic) monitor. I do have the
piece of paper with sketchy technical infos (v/h scan, dot resolution etc)
and it could be possible it is the source of my woes. But I am not giving up
yet. That is why I am here.
Paul
The time consumed and difficulty of just setting up the sound alone should scare away
any chance of Linux spreading worldwide. Must
it be this difficult? The average Joe doesn't have time to reinvent the wheel when
all he wants to do is drive off in a new car.
Sorry, I'm somewhat dishearten
A mirror is a download site which contains a copy of files at some other
site, so for example, the "Update" program asks you to select a 'mirror'
of the main mandrake download site so that you can choose a site that may
be closer (and therefore perhaps faster) to download from, as well as
allow
On Sat, 18 Sep 1999, you wrote:
Just noticed a mention on a French magazine website regarding Corel Linux.
To save me several hours with dictionary does anyone know any more about
this?
http://linux.corel.com/
John the Nadger
http://www.nadger.freeserve.co.uk/goonpage.html
--
Regards
You americans are so lucky. Here in Brazil the normal connection speed is 2
or 3KB/sec. It will take "a little" more time than you.
- Original Message -
From: Caymen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, September 17, 1999 7:51 PM
Subject: Re: [newbie] 6.1 Download/Install
I had the same thing using mandrake60 also the only way i found around
it was to redo the kernel and get rid of the mdk and if ya have it smp on the
label
Ralph
IInstalling /usr/local/bin/vmnet-sniffer
Installing /usr/local/bin/vmnet-bridge
Installing /usr/local/lib/vmware/config
Finding
OK, I'm lost. So, do I need to download an install the entire current
version (3.3.5 -- the PCI Starfighter is supposedly supported in it) or can
I just use the i740 server that came on my Mandrake 6.0 CD? It is in a
subdirectory on the CD, but wasn't part of the installed package doesn't
show
I wish!
Unfortunately, even some major cities in the States still don't have high speed
access. I downloaded my copy with my 56k modem. While that isnt quite as slow
as your connection, its pretty close.. I averaged about 4.8 KB/sec for my
download of Helios.
Darin -
--
Cthulhu for President
Installed Mandrake 6.0 but have file problems. The program advises
using 'fsck' without the -a or -p switches.
What the heck is fsck and how do I make it work?
I've installed Linux-Mandrake about 6 times
now and
every time I do X windows just comes up
blank regardless
of the resolution of screen. The
mouse works ok, it boots up
without problems. When I execute KDE
I get error messages
"can't find X server"
What am I doing wrong...?
I've installed Linux-Mandrake about 6 times
now and
every time I do X windows just comes up
blank regardless
of the resolution of screen. The
mouse works ok, it boots up
without problems. When I execute KDE
I get error messages
"can't find X server"
What am I doing wrong...?
I get and error message upon executing
kde
"can't connect to x server"
i've installed linux about 6 times now and
same or worse results.
end
TERRY
my email is [EMAIL PROTECTED]
Sevatio Octavio wrote:
The time consumed and difficulty of just setting up the sound alone should scare
away any
chance of Linux spreading worldwide. Must it be this difficult? The average Joe
doesn't
have time to reinvent the wheel when all he wants to do is drive off in a new car.
Sean Pritchard wrote:
OK STEVE:
I now have all the files for 6.1 (Did I need to download the whole
Mandrake/ directory? as
/Mandrake/
/RMPS/
/base/
/instimage/
/lib/
/modules/
/usr/
At the command line type e2fsck /dev/partition. Replace partition with the
drive and partition designation. Example the first hard drive would be hda
and the first partition on hda would be hda1. the second hard drive would be
hdb and the first partition on hdb would be hdb1. Do this for all your
What do I need to do to setup system logging again? (/var/log/secure,
xferlog, etc)
Can anyone tell me all of the steps I need to take to implement system
logging as if I were implementing it for the first time.
Thanks.
Has anyone used a shared injet printer with Samba?
My windows client won't let me create the share because it says that the
printer is off-line. I used SWAT to setup the printer and it does show up
in the browsing list for the server.
I'm using Red Hat 6.0 (Mandrake 6.0) and the printer is an
I wish to write some VB or C++ apps for windows clients that would access a
PostgresSQL database. I have done this with Microsoft databases but I would
like to get away from Microsoft servers in favor of Linux.
Are there ODBC drives that will work on the clients? What needs to be done
on the
On Sat, 18 Sep 1999, Eric L. Damron wrote:
What do I need to do to setup system logging again? (/var/log/secure,
xferlog, etc)
Can anyone tell me all of the steps I need to take to implement system
logging as if I were implementing it for the first time.
How did you get it to stop???
You
I've recently installed mSQL and purchased O'Reilly's _MySQL and mSQL_. I
have the most recent release of apache to be made available through
MandrakeUpdate.
When I try to use any msql specific commands from within PHP, I am told
that the command is unknown. I can't even open a connection. What
Bernhard Rosenkraenzer wrote:
On Sat, 18 Sep 1999, Eric L. Damron wrote:
What do I need to do to setup system logging again? (/var/log/secure,
xferlog, etc)
Can anyone tell me all of the steps I need to take to implement system
logging as if I were implementing it for the first
Every now and then I get this message in my console:
INIT: "Id "mo" respawning too fast. Disabled for 5 minutes."
What is this "mo"? Why is it respawing, and how can I make it stop?
I couldn't find anything about it in the list archives.
Any help appreciated,
Thanks.
/Gustavo.
newbie remove
__
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
newbie remove
__
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
newbie remove
__
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
On Sat, 18 Sep 1999, Brett Jones wrote:
php was not built with support for msql. It should have mysql and
postgresql from Mandrake. If you need to use msql and you don't want to
use mysql, recompile php with support for msql.
Do I just download the source and compile as if it were a new
A few times recently I've had the kernel crash on me. This generally
happens when I have a PPP connection up and am switching between a non-X
screen and the screen I have KDE open in. I'm running kernel 2.2.9-27mdk
What happens is that a long stream of text/numbers flashes past and then
stops
Manny Styles wrote:
Is anyone else getting messages over again (ie: a message that was
sent 3 or so days ago that keeps returning). It could just be me, but
I want to be sure before I report any problems about the mail server
to my ISP.
Manny Styles
Yes, Manny, I thought it was just me
- Original Message -
From: Joseph L. Czapiewski [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 18, 1999 7:07 PM
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
Think this gentleman wants to get our attention? ;o)
Mike
"Joseph L. Czapiewski" [EMAIL PROTECTED] wrote:
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie remove
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie remove newbie
On Sun, 19 Sep 1999, James Stewart wrote:
A few times recently I've had the kernel crash on me. This generally
happens when I have a PPP connection up and am switching between a non-X
screen and the screen I have KDE open in. I'm running kernel 2.2.9-27mdk
Can you try updating the kernel to
Installing Mandrake (Venus) 6.0 everything appears to go well although
but I think my old Trident 1meg video card should display at 16 bit
level 640x480. Anyway, on initial boot after install load I get this:
INIT: Entering run level 5
INIT: can't execute "/etc/rc.d/rc"
INIT: Id "1" respawning
Does anyone know how I can install the drivers for the NE2000 ethernet
card??? I bought an ne2000 compatible ethernet card, installed it, but
don't know where to go from here... Is there a setting to change in my
linux system somewhere? does it work like Win95/98?? I have linux
mandrake if that
"Joseph L. Czapiewski" wrote:
newbie remove
__
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
Joseph, one of the definitions of insanity is:
Repeating the same actions and expecting
different results.
If sending remove
On Sat, 18 Sep 1999, you wrote:
Thanks Mark for understanding.
I suppose my video problem is with my darn (generic) monitor. I do have the
piece of paper with sketchy technical infos (v/h scan, dot resolution etc)
and it could be possible it is the source of my woes. But I am not giving up
OK, now that I have installed the i740 xserver and rerun xf86config, what
good is it? My system is still loading the generic VGA dirver at 640x480.
I've managed to figure out how to comment out the annoying virtual desktop
settings in the config file, but I need to know how I can force the
Michael Scottaline wrote:
Think this gentleman wants to get our attention? ;o)
If he keeps this crap up, he's going to get a copy of /proc/kmem in his
mailbox.
"Joseph L. Czapiewski" [EMAIL PROTECTED] wrote:
newbie remove newbie remove newbie remove newbie
remove newbie remove newbie
"Joseph L. Czapiewski" wrote:
newbie remove
New from Ronco!
--
Steve Philp
Network Administrator
Advance Packaging Corporation
[EMAIL PROTECTED]
Andrei wrote:
You americans are so lucky. Here in Brazil the normal connection speed is 2
or 3KB/sec. It will take "a little" more time than you.
Andei:
I can't help your connection speed, but I can point you to
something that will help with big downloads. Get a package
called NetVampire.
Blank as in how? Is it black? Or just like a backgroundcould it be you're
in a virtual desktop area? If you're not sure try moving your cursor to the
extreme edge of the screen, does scroll around and show you icons and such?
Best of luck!
Mark
terry wrote:
I've installed Linux-Mandrake about 6 times now and
every time I do X windows just comes up blank regardless
of the resolution of screen. The mouse works ok, it boots up
without problems. When I execute KDE I get error messages
"can't find X server"
What am I doing
I'm installing Mandrake 6.0 on a Compaq Presario 4504, and I'm running
into two problems which are rather distressing. In short, it won't
communicate with the NIC or the modem. First the NIC problem. At
system boot, it says it's bringing up eth0, and it gives a green "OK"
indicating
Steve Philp [EMAIL PROTECTED] wrote:
Michael Scottaline wrote:
Think this gentleman wants to get our attention? ;o)
If he keeps this crap up, he's going to get a copy of /proc/kmem in his
mailbox.
Steve Philp
Network Administrator
Advance Packaging Corporation
[EMAIL
I need to install PHP. I picked up PHP-3_0_9_tar.tar from
http://www.downloadsafari.com
How do I know that this file will work with Mandrake 6.0 (RedHat 6.0)
How do I install it?
Thanks
Hi all! I'm looking for a fellow Canadian who's
also using Sympatico's HSE (that's my ISP for the rest of you), who can give me
a hand with the new Access Manager software. I just burned and installed the new
61-1.iso image, and I see Sympatico's posted a R.H. 5.2 version; full source;
and
Use the php3 src.rpm from mandrake and then read the php docs about the
./configure switch needed. It's probably "--with-msql". Make the needed change
to the spec file and then run "rpm -ba specfile.spec".
On Sat, 18 Sep 1999, you wrote:
On Sat, 18 Sep 1999, Brett Jones wrote:
php was not
On Sat, 18 Sep 1999, you wrote:
terry wrote:
I've installed Linux-Mandrake about 6 times now and
every time I do X windows just comes up blank regardless
6 times, ouch. Try running Xconfigureator from now on. It's a lot less work.
of the resolution of screen. The mouse works ok, it
Has anyone with this card installed 6.0? The list of supported Creative
Logic cards has many graphics blaster variants, all with some (model?)
number, but I can't find anywhere in the documentation that came with my
card a number like any of the available choices. If anyone has any
advice, I'd
Downloaded it with winblows? It should be php-3.0.9.tar.gz. You should go
download the newest tar file "3.0.12" from php.net, and while your there RTFM.
Note: It may be installed on your sys already. Run "rpm -q php"
In the future go to a real software database site (freshmeat.net), that has
Try http://www.opensound.com/download.cgi for the download. The home
page is http://www.opensound.com-- not http://www.4front-tech.com
Murray
Sevatio Octavio wrote:
I went to http://www.4front-tech.com but I can't get on their "download" or
"purchase" page. Does anyone know if there
Michael Scottaline wrote:
Steve Philp [EMAIL PROTECTED] wrote:
Michael Scottaline wrote:
Think this gentleman wants to get our attention? ;o)
If he keeps this crap up, he's going to get a copy of /proc/kmem in his
mailbox.
Steve Philp
Network Administrator
Advance
Bill Crouch wrote:
Installing Mandrake (Venus) 6.0 everything appears to go well although
but I think my old Trident 1meg video card should display at 16 bit
level 640x480. Anyway, on initial boot after install load I get this:
INIT: Entering run level 5
INIT: can't execute
Joe Brault wrote:
Does anyone know how I can install the drivers for the NE2000 ethernet
card??? I bought an ne2000 compatible ethernet card, installed it, but
don't know where to go from here... Is there a setting to change in my
linux system somewhere? does it work like Win95/98?? I
Thanks for the info Brett.
And BTW I am a newbie to Linux and I have been RTFM almost constantly and
I'm getting F*king tired of RTFM so if I can get a little information
without RTFM, I certainly will.
So, If anyone out there can tell me how to install a "tar.gz" file so that I
don't have to
I will second this recommendation. You can try it out before you buy it
to make sure it works. I have succeeded in getting most of the sound
things to work (including KDE CD Player, RealPlayer G2 and playing .MID
and .WAV files) , but not UMP with Netscape. If anyone can help with
that I would
On Sat, 18 Sep 1999, you wrote:
Has anyone with this card installed 6.0? The list of supported Creative
Logic cards has many graphics blaster variants, all with some (model?)
number, but I can't find anywhere in the documentation that came with my
card a number like any of the available
I went to http://www.4front-tech.com but I can't get on their "download" or "purchase"
page. Does anyone know if there is another
site that could supply this driver?
Desperate Seve
-Original Message-
From: Steve Philp [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date:
- Original Message -
From: Brian Erikson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 18, 1999 7:33 PM
Subject: Re: [newbie] another mail sever problem?
Manny Styles wrote:
Is anyone else getting messages over again (ie: a message that was
sent 3 or so days
Does anybody have any tips on how to make the fonts in Netscape look
better?
"Bob" == Bob Jackson [EMAIL PROTECTED] writes:
[snip]
Bob I can't help your connection speed, but I can point you to
Bob something that will help with big downloads. Get a package
Bob called NetVampire. It only runs under W95, I don't know if
Bob there's a Linux equivalent. It
"Eric L. Damron" wrote:
So, If anyone out there can tell me how to install a "tar.gz" file so that I
don't have to RTFM I would appreciate it!
The problem is that there is no answer to "how to install a .tar.gz
file", because such a file could contain just about anything. In the
case
I asked this question before, but did not receive an answer
When I print from KEdit, or if I do cat file | lpr
nothing prints right away, and there is nothing in the queue. If I then
print something else (even a blank page) from other applications (e.g.
Netscape, Star Office, WordPerfect),
I am trying to get shutdown to send a warning message to other users... the command
should be something like
shutdown -k now mesg
But it just sends shutdown canceled.. on red hat system, that works and I never have
a problem... I tried it on 2 mandrake computers, and they both have the same
You are still at 640x480 8bpp because you are probably using the vga16 server,
not the XBF_i740 server. To solve this, go to /usr/X11R6/bin and make a
symbolic link to the XBF_i740 file as follows:
cd /usr/X11R6/bin
ln -s XBF_i740 XF86_SVGA
Then run Xconfigurator and select unlisted card,
On Sat, 18 Sep 1999, Gustavo Viola wrote:
Every now and then I get this message in my console:
INIT: "Id "mo" respawning too fast. Disabled for 5 minutes."
What is this "mo"? Why is it respawing, and how can I make it stop?
I couldn't find anything about it in the list archives.
68 matches
Mail list logo